GENERAL RM 2024 25 RC2 Phase 2Cluster 2 One Year RC Pathanapuram KLM Zone 1 One Year Running Contract Pattazhy Pidavoor Tharyanthoppu Road 0 000 8 700 Kunnikkodu Kura Govindamangalam Road 3 000 8 300 Pandithitta Panampatta Road 4 700 700 Alimukku

Amount

Reactive maintenance (Initial rectification work)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD27862/2024-2025:Providing laying and rolling of MSS/close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80-100 KN capacity and finishing to required level and grade - By manual means

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

Premonsoon work

OD27866/2024-2025:Engaging mazdoor for lowering side berms, clearing side berms, clearing side drains , removing silt from culverts, cutting earthen drains, diverting blocked water, removing the branches of trees leaned towards the road threatening pedestrians and traffic and removal of fallen trees or branches on the road clearing traffic blockage, stack the wood at suitable place and various works as directed by the engineer in charge

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD27867/2024-2025:Engaging hydraulic excavator of 1 cum bucket for various works as directed by the Officer in charge.

OD27868/2024-2025: Engaging tipper for conveying materials, debris to places as directed by departmental officers in charge.

OD27869/2024-2025:Hire Charge For Wood Cutting Equipment's, pulleys etc.

OD27870/2024-2025:Engaging Wood Cutter for cutting down the dangerously standing tress and its branches

3.24.A:Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)

Proactive/Preventive maintenance

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD27863/2024-2025:Providing laying and rolling of MSS/close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80-100 KN capacity and finishing to required level and grade - By manual means

10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.

3.11:Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.

OD27864/2024-2025:Engaging JCB for emergency works if any

OD27865/2024-2025:Conducting and reporting routine inspections for the entire length of the project road at a frequency of 7 days throughout the agreement period of the running contract as directed by the departmental officer at site. Additional Routine Inspection may be required in response to reports or complaints from the police , other authorities and the public as a result of major incidents, typhoon or flooding damages etc. and not measurable/payable. A promotion on the RI should be carried out either during or immediately following a period of wet weather

Emergency work

OD27861/2024-2025:Engaging mazdoor for various emergency works as directed by the departmental Officer in charge

10.12:Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side

OD53126/2024-2025:Hire charges for cutting equipment like electric saw, coir, pulley etc

OD53127/2024-2025:Engaging Wood Cutter for cutting down the dangerously standing tress and its branches

OD53129/2024-2025:Engaging Hydraulic excavator for excavating excess soil and maintaining the berm

OD53128/2024-2025:Engaging Tipper for carrying out excess soil

8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification)

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm

OD53123/2024-2025:Providing and fixing of DLP board for Running contract work with Non- retro-reflectorised Vinyl sign with 1 year Warranty manufactured vinyl printed sheeting fixed over aluminum sheeting 2mm thick/aluminum composite material sheeting 4mm thick with area not exceeding 0.90sqm,with suitable back supporting frame of MS angle 40x40x3 and supported on GI Pipe pole 50mm NB conforming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size of 45x45x60cm ,60cm below ground level including painting all exposed surfaces with two coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including littering symbols etc

Prince Thomas (BID ID -2123204)

Bidder Name

Achankunju

Prince Thomas