CONSTRUCTION OF AHMEDABAD HAAT FOR AATMNIRBHAR BHARAT @ T.P. 119 , F.P 197, 206 IN NIKOL WARD OF EAST ZONE AHMEDABAD MUNICIPAL CORPORATION (RE-INVITE-3)

ITEM NO ITEM OF WORK UNIT QUANTITY AMOUNT

Excavation for foundation up to 1.5 m DEPTH including sorting out and stacking of useful material sand disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm. In depth consolidating

each disposited layer by ramming and watering.

Providing and laying cement concrete 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregates 20mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M- 250 grade concrete for reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -

in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg ) (GRADE SLAB)

Providing and laying in position Ready Mixed M- 300 grade concrete for reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -

in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 475 kg ) (FOUNDATION)

Providing TMT Bar FE 500D reinforcement for R.C.C.work including bending, binding and placing in position complete upto floor two level ( Foundation

to First Floor )

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of

7 propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain SQM 1462.32 ₹ 171.68 ₹

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of

8 propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain SQM 5426.88 ₹ 297.68 ₹

concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of

9 propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain SQM 5126.00 ₹ 252.00 ₹

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of

10 propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain SQM 6001.93 ₹ 192.15 ₹

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Extra for Providing formwork with sheathing steel sheets so as to give a fair finish in (B)Flat surfaces such as soffits of slabs Landings and the like. (1) Floors

etc. upto 200mm in thickness.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A)In

12 beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins Quintal 253.00 ₹ 8,330.18 ₹

conneted to common rafters and the like

Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with

grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed

in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and

finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane,

sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per

Add to or deduct from the rate for Bore Holes of 3.5 m Depth, if bore holes are made deeper or shallower than 3.5M. for Piles of following diameter.(iii)

(i) Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth in Cement Mortar 1:6 (1-cement : 6-coarse sand including

levelling up etc. complete

Earthwork for embankment including breaking clods, dressing with all lead and lift and including watering rolling and consolidation of subgrade in

16 layers at O.M.C. to required dry density including filling the depression which occur during the process using power roller 8T to 10T. From Borrow area CUM 26103.00 ₹ 151.00 ₹

as per lead available.

17 Site Clearance, Demolition and disposal of unserviceable materials with all lead and lift. CUM 2500.00 ₹ 524.48 ₹

18 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. CUM 2416.00 ₹ 286.20 ₹

Conevance, Charges of earth lime, murrum, building rubbish, Manure, Gárbage, Sludge, excavetd rock, Fly ash, aggrigate of any kind etc complete.

Up to 5 KM Lead

Conevance, Charges of earth lime, murrum, building rubbish, Manure, Gárbage, Sludge, excavetd rock, Fly ash, aggrigate of any kind etc complete.

Above 5 KM and Up to 10 KM Lead

Conevance, Charges of earth lime, murrum, building rubbish, Manure, Gárbage, Sludge, excavetd rock, Fly ash, aggrigate of any kind etc complete.

Above 10 KM Up to 15 KM Lead

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5.

(1- Cement : 5 -fine sand)(A) Modular

23 Extra for brick work in superstructure above plinth level upto floor two level (A) Modular cu.m 948.60 ₹ 4,607.37 ₹

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS:2222 in Exposed Brick work

including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

Above plinth level upto floor V level

Brick Jali Wall in Wire Cut / 'Face' Bricks (Jindal Mechno Make or similar)

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand) Extra over items 4 for finishing with a floating coat of neat cement slurry.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

27 Extra over items 17002B for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls. Sq.m 2684.00 ₹ 180.18 ₹

28 Extra over items 17002B for finishing with a floating coat of neat cement slurry. Sq.m 298.00 ₹ 203.34 ₹

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for plastering comprising of base coat of 12 mm thick cement

29 plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) Sq.m 173.00 ₹ 269.78 ₹

finished with trovel including scaffolding curing etc. complete.

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete

including cost of formwork in (screed work) 25 mm THK.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

31 undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and Sq.m 7879.00 ₹ 78.44 ₹

sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

32 surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered Sq.m 7879.00 ₹ 40.19 ₹

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat

of exterior primer applied @ 2.20kg/10 sqm

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other foreign matter andsand papered smooth.

Providing and fixing extruded facing clay brick cladding (Sand-Finish type) of approved shade and size 220mm (L) × 70mm (H) × 20mm (T), fixed on

suitable surface with polymer modified adhesive or mechanical fixing system as per manufacturer’s specification.

The work includes cutting, wastage, joint filling with cement-based pointing material or as per architectural design intent, cleaning, curing, and

finishing complete in all respects as directed by the Architect.Brick NameExtruded Sand-Finish Cladding – REC-712

TypeExtruded Wire-Cut, Sand Finish (Rough)

ManufacturerRadha Krishna Brick Industries

Size220 × 70 × 20 mm

Coverage1 sq.m = 60 bricks (approx.)

Water Absorption< 12%

Soluble Salt ClassificationS2 (Nil)

Dimensional ToleranceT1 (±2–3%)

DurabilityF2 (Suitable for severe exposure)

Weight per Brick0.65 kg approx.

PackingShrink-wrapped on wooden crates (2200 nos./pallet)

Pack Size / Weight1000 × 1000 × 1000 mm / 1.5–1.75 tonnes per pallet

Standard ReferenceAs per IS 2222:1991 & IS

ApplicationExterior & interior wall cladding for architectural finishes

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement :

4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top

36 layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per Sq.m 190.00 ₹ 953.05 ₹

approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer,

including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the

Engineer-in-charge.

mm wide and 15 mm deep groove

Providing, fabricating, and installing a custom-designed, artistic, mixed media wall mural made mix media like any type of paint, on the specified wall

38 area as per the approved Final Design Drawings provided by architect, and Technical Specifications. design intent drawings are provided by sqm 178.00 ₹ 4,025.00 ₹

architect, contractor to provide shop drawings for the same for execution. cost including of preparation of shop drawings.

Providing and apply water base water repellant coat with min. 2 coat with for external surface of exposed concrete and stone cladding area of dow

Dowsil IE 6683 Emulsion (Water Base) or approved equivalent as per manufacturer's specification. (Coverage Ratio=1Kg:17 Sq.Mt.)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement :

coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying Rough finish Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

Providing and laying rough finish kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement

: 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of

approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

44 @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond SQM 1077.00 ₹ 2,971.64 ₹

cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and

rubber mallet for placing the slab gently and easily. Size of tile as per drawings of all colours and shades.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to

I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid

46 and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and SQM 2301.00 ₹ 3,674.67 ₹

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished granite stone slab of colour black, cherry / ruby red or

Providing and fixing machine cut, mirror/ eggshell polished, granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc.,

in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement:

47 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching SQM 17.00 ₹ 8,540.14 ₹

shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick

Italian granite stone slab.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Providing and fixing 18mm thck granite premoulded and prefinished, machine cut stone for coping, parapet top and similar locations of required size,

approved shade, colour and texture laid using approved adhesive over cement concrete screed (paid separately), joints grouted with approved

50 matching coulour grout, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all SQM 936.00 ₹ 12,340.00 ₹

levels, as per sample approved by Engineer in-charge.

Providing and laying noninterlocking, cobble stone Shotblasting finish 80mm thick M-20 grede of specified thickness, size, grade of concrete and

colour machine made and blasting by automatic shot blasting machine and high density of as per approved sample of approved make for footpath,

parking areas, service lanes, cross over and other areas as mentioned in the drawing. Including providing and laying 50 to 80 mm thick average

bedding layer of coarse sand below paver block as per required grading and specification. Laid paver block shall be mechanically compacted. The

51 work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. Small size of paver block with same specifications Sq.m 214.00 ₹ 1,897.50 ₹

shall be used at residu or at end. It should be laid in such a way that the no cutting of the paver block to be necessary. If cutting of paver block shall

be required, than cut by machine only and laying to be done by skilled flooring mason. The Finished surface of the paver block shall have coarse

sand texture finish. Paver blocks shall be compacted and shall be relaid if necessary. Actual laid area shall be measured and paid without any

wastage.A) 80mm thick M-20 grade block of size 100mm x 100mm.

Supplying and fixing of 380 mm H x 300 mm L x 200 mm B Kerb block for Central Verge in M-20 grade using 20 mm nominal size black trap aggregate

of Sevaliya/Timba or equivalent quality for pre-cast blocks, reasonably exposed finish/ formwork, mould with well equipped with vibratory system for

kerb stones of approved design including curing, etc. complete, including the cost of formwork etc. complete. The rate shall also include necessary

52 cutting of asphalt, fixing the Kerb stones in line and level on 5 cm thick sand bedding with necessary equipments and materials. The rate shall also Rmt 190.00 ₹ 431.96 ₹

include the flush pointing in CM (1:3) for all joints of the kerbstones. Filling of zari alone the sides of the kerb stone fixed with Bituminous concrete mixed

in proper position as directed by Engineer in change to form a portable mixture. In any case Gravel or such type of materials shall not be allowed for

production.(AMC approved Rate )a) Laying on 5 cm thick Sand Bedding

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing

and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

Providing and Laying of Modular paving stones Grey/Coloured 80 mm thick, M-40 Grade of any size ; shape Decastone neo Design with ten different

sizes of paving stones using black trap good quality aggragate of 20 mm nominal size for footpath, parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in charge. Cost includes formworks using steel mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall be mechanically compacted. The work of paving blocks shall be executed in line and

level by skill mason of flooring work only. It should be laid in such a way that the no cutting of the paver block to be necessary. if cutting of paver

block necessary then it should be cut by machine only and carting. The finished surface of the paver block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be relaid if necessary. Gravel or such type of materials shall not be allowed for production. Laying on

50mm thick sand beddding. Make VYARA or Equivalent

Maxi- Pavers 65mm thk Supply and laying of "MAXI" PAVERS GREY 65MM as per drawing with minimum average 3 MPa bending strength at 28 dayson

50mm thick sand bed. Rate includes: Supplying of CC Paver Blocks with Transportation, Unloading of Paver Blocks, Taking and marking levels, Supply

55 of bedding and jointing materials for laying/fixing for 50mm thickness, Spreading of bedding material, Using cut blocks along edges, Doing ‘Cement Sq.m 2725.00 ₹ 1,610.00 ₹

vata’ along edges, Vibration of laid pavers with Vibrator, Sweeping the excess sand off the paving and handling over the site complete.

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with

56 strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed Sq.m 2725.00 ₹ 797.04 ₹

of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing & Fixing Granite wash basin counter of south indian granite of Min. 600mm wide using Top 18mm thick granite having drop facia with epoxy

adhesive to 25mm tk. marine play wood along the platform as per typical details given in. ref. drawing of approved shade and sample. It allows for all

57 necessary mirror polish moulding, edge polishing, chamfering, etc. completed. Necessary arrangement of MS 50mmx50mmx2mm customized bracket SQM 38.00 ₹ 3,748.00 ₹

fixed to given wall to support granite top shall be part of this item. It is inclusive of all necessary chasses & civil work, holes and cuts etc. comp. No

extra payment shall be made in any case.

Providing and fixing 20 mm thick machine cut, machine polished approved Granite stone jambs about as per drawings wide of shape and size of

approved quality and colour as shown in the drawing etc. Stone shall be fixed with approved adhesive on back, to correct line, level and plumb.

Joints are well cleaned grouted with matching colour approved readymade grout, curing, polishing, cleaned and where specified or shown in

drawing exposed edge of stone rounded / chamfered and polished with provison of notch for lighting all complete to the satisfaction of the EIC.

Providing and fixing 20mm thick and about 75 mm high approved mirror finish Granite stone risers, skirting machine cut and machine polished in

piece or as directed, to full length of step, stone fixed by approved adhesive on back, to correct line, level and plumb. Joints are well cleaned

59 grouted with matching colour approved readymade grout, curing, polishing, cleaned and where specified or shown in drawing exposed edge of SQM 33.00 ₹ 1,352.00 ₹

stone rounded / chamfered and polished, skirting to be match with wall cladding/ flooring pattern all complete to the satisfaction of the Engineer in

Providing and fixing 20mm thick approved up to 600mm wide honed finish Granite stone treads in 3 peices to full length of step and machine cut,

machine polished. Treads to be rounded at front and all exposed edges machine polished. Further treads to have edge polished chamfering with

60 nos. (6mm x 3mm deep) grooves on top at front or as detailed in drawing for antiskid effect as shown in the drawing. Treads fix to be using approved SQM 41.00 ₹ 10,359.00 ₹

adhesive over cement concrete screed joints grouted with approved matching coulour grout,, curing, cleaning, polishing etc. all complete at all

heights and leads to the approval of the Engineer in charge.

Providing & Fixing Sandwich type Kitchen Platform of Min. 750mm wide using Top 18mm thick granite of approved shade and sample and bottom

25mm thick single side Polished kota stone with 25 mm thick screed of cement mortar 1:3 With granite Facia Patti. and vertical End granite supports.

61 The stone shall be fixed by chassing in to the wall surface and supported vertically with 25mm thick sandwich kota stone support to complete job as SQM 61.00 ₹ 8,055.00 ₹

directed by Architect/Engineer -in-charge. It is inclusive of all necessary chasses & civil work, holes and cuts etc. comp. No extra payment shall be

made in any case.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by

cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite stone of

Providing and laying rough chiseled dressed stone flooring over 20mm average thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M.

(1-Lime putty : 1.5 - coarse sand) including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. complete. (A) 25mm thick

Providing & filling joints with cementecious Grout, a 3-part, 100% solid cementecious based, chemical & stain resistant grout, conforming to IS

(Part 2: 2019, tile jointing materials), ANSI A118.3 (epoxy grout standard), EN 13888 (RG – reaction resin grout, classification RG2). To be used for

64 ceramic, vitrified, porcelain, glass mosaics, Granite, Marble, Metal tiles, Agglomerates (Engineered Stones), Precast Terrazzo tiles joints (1.5–12 mm), RMT 2054.00 ₹ 80.50 ₹

mixed and applied as per manufacturer’s specifications, finished smooth, cleaned and cured.

(1 PAIL=10KG , 10KG- 50SQM)

Providing and supplying 6mm thick SUD finish panel with UV coating on both sides, of approved make and shade, as per the direction of the Architect.

65 The rate quoted shall include all materials, surface preparation, edge finishing, transportation, loading, and unloading at site, complete in all respects. sqm 336.00 ₹ 333.50 ₹

High-Pressure Compact Laminate (HPCL) wooden panels

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with

mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made out of2.64 mm dia x 230 mm long G.I. wire at every junction,

66 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition sqm 888.00 ₹ 1,111.76 ₹

with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped

galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x3600mm, cross "T" of size 24x25x0.3x1200mm, secondary cross "T" of size

24x25x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick

PPGI. PPGI wall angle 24x24x0.4x3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to

Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc® soffit cleat

27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc

coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then

suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to

67 center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than sqm 55.00 ₹ 1,178.75 ₹

600mm from the adjacent wall. 24x25x0.3x1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is interlocked between the main T at

600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised

120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than

600mm are to be supported independently. Finally 12.5mm thick square edge Gyproc Polyshield Gypsum tile (meets requirement of specification

mentioned under DAR no. 12.52.3 in Delhi Schedule of rates (DSR)), of size 595x595mm, made of Gypsum plasterboard, manufactured from natural

gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the

back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the

tile a completely sealed unit, is placed in the grid.

Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped

galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x3600mm, cross "T" of size 24x25x0.3x1200mm, secondary cross "T" of size

24x25x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick

PPGI. PPGI wall angle 24x24x0.4x3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to

Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc® soffit cleat

27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc

coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then

suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to

68 center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than SQM 146.00 ₹ 1,178.75 ₹

600mm from the adjacent wall. 24x25x0.3x1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is interlocked between the main T at

600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised

120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than

600mm are to be supported independently. Finally 12.5mm thick square edge Gyproc Polyshield Gypsum tile (meets requirement of specification

mentioned under DAR no. 12.52.3 in Delhi Schedule of rates (DSR)), of size 595x595mm, made of Gypsum plasterboard, manufactured from natural

gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the

back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the

tile a completely sealed unit, is placed in the grid.

Providing & Fixing suspended ceiling consist of GypSerra® (“Patented in India (325062)”) Metal framework having ceiling drop of upto 1000mm,

satisfying L/400 criterion at 200Pa. Ceiling comprises of Single layer, tapered edge 12.5mm Gyproc®Moisture Resistant Gypsum Board, certified

GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions, consists of an aerated gypsum core with water

repellent additives encased in, and firmly bonded to strong paper liners and conforming to IS 2095 Part 1:2023 Type H1 / EN 520:2004, Type-A & H1,

having thermal conductivity 0.19w/m°k having flexural strength – {Longitudinal > 550N & transverse > 210N}. GypSerra® Metal frame work, in

compliance with BS EN 14195 & manufactured using CR1 Grade GI Sheet as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with

AZ150 finish abiding to IS 15961 & tested for 500hrs of salt spray test as per ASTM B117 with a Global Warming Potential of 3.16 Kg CO2 per Kg from third

party verified EPD as per ISO14025:2006, includes 28x20x30x0.5mm GypSerra® Perimeter Channel fixed along the periphery of existing wall/partition

with the help of (6x40mm) Impact Sleeve Anchor for brickwall/blockwall, Ø8x45mm Gyproc® Rawl Plug for RCC & Gyproc® Drywall Screw for Drywall,

at 600mm centres. 25x10x0.5mm GypSerra®Ceiling Angle is suspended by fixing it to 37x27x25x1.6mm Gyproc®soffit cleat {Material: CR1 steel

(IS513),YS: 260Mpa ,Finish: Galvanised 120GSM (IS277)} and Ø8x45mm Gyproc®Rawl Plug at the true soffit, creating 1220x1220mm grid.

45x15x15x0.9mm GypSerra®Intermediate channel is fixed to the GypSerra®Ceiling Angle with M6x12mm Hex Nut & Bolt arrangement or with 2 Nos of

Ø4.2x13 Gyproc®Metal to Metal screw. 80x53x26x0.5 GypSerra®Ceiling Section is then fixed to the GypSerra®Intermediate Channel with the help of

Gyproc® Connecting Clip {Material: EN 42J High carbon spring steel wire (BS 970), Finish: Zinc Plating (Minimum 5μ)} and in direction perpendicular to

the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gyproc® Moisture Resistant is then screw fixed to ceiling section with

ø3.5x25mm Gyproc® Drywall Screw with 17nos per m2 at 230mm centres on ceiling section & 150mm at periphery of ceiling. Edges & joints to be

finished with Gyproc® Pro-Fill JC conforming to ASTM C475 & Gyproc® Paper tape. Vendor to submit MTC, material inspection report and/or

performance certificate for the system.

Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Bolt-slot metal grid of hot dipped

galvanized steel sections. It consists of main "T" runner of size 42x15x0.3x3000mm, cross "T" of size 42x15x0.3x1200mm, secondary cross "T" of size

45x15x0.3x600mm and PPGI wall angle of size 14x20x0.4x3000mm. Bottom exposed capping of width 15 mm & groove (5.6x7.5)mm size of all T-sections

shall be 0.25mm thick PPGI. PPGI wall angle 14x20x0.4x3000mm{Material-GI(IS513),YS-280Mpa,Galvanised 90GSM(IS277), Finish- painted 24-27 micron

top side,8-10 micron backside,)} is fixed along the perimeter of the ceiling to walls, partitions or columns etc., with wooden screws at 300mm centers

or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc® soffit cleat 27x37x25x1.6mm {GI(IS513)YS- 260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with

Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating

70 1200mm x 1200mm grid. Main-T runners 42x15x0.3x3000mm {GI(IS513)YS- 280Mpa,Finish-Galvanised 90GSM (IS277) are then suspended at 1200mm c/c Sq.m 72.00 ₹ 1,322.50 ₹

from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and

not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall.

42x15x0.3x1200mm cross T {GI (IS513) YS- 280Mpa, Finish-Galvanised 90GSM(IS277) } is interlocked between the main T at 600mm center to center to

form a grid of 1200x600 mm and then secondary cross “T" 42x15x0.3x600mm {GI(IS513) YS-280Mpa,Finish-Galvanised 90GSM(IS277) } is then interlocked

at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported

independently. Finally White coloured Mega Fibrotone™/Celotex Pin NRE tiles of size 595x595x15mm having NRC of 0.55, CAC 35,LR 0.85 and suitable

for use in Relative humidity up to 95% and temperature up to 40  C, are placed in this grid.

Providing and making ceiling light cove in gypsum board, size 150–200 mm, including metal framing, edge beading, joint finishing with tape and putty,

ready for paint finish, as per detailed drawings and instructions of architect.

Providing and Making cove 150-200 From Wooden box to house Curtain, Blind, light. Cost to be included with all necessory finishing and hardware as

per detail design and drawings.

Terrace Waterproofing with Insulation

Surface Preparation: Providing and laying water proofing treatment to horizontal and vertical surfaces of concrete, including cleaning the surface

with wire brush, treating all surface cracks, construction joints and honeycombs by grouting with specialised non shrink grout,coving preparation at

wall - slab joint and preparation of surface in all aspects to receive the waterproofing.

Injection Grouting (If required): Providing Chemical injection treatment in the form of pressure grouting to the cold joint by injecting cement slurry

mixed with grout admixture ArmGrout Additives @ 250 gms.per bag of cement, in the required consistency through the pre fixed PVC nozzles in the

10mm dia holes, fixing of PVC nozzles with quick setting compound ReArm Fix 10S of MYK Arment or equivalent and final cutting the projected nozzles

and sealing off the PVC nozzles after the injection operation is over with quick setting compound , no shrink rapid setting mortar compound, finishing,

curing etc. as per manufacturers specification and as directed.If any lekages found in pre ponding then this need to be done.

Coving: Providing and Applying at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with SBR polymer ReArm Bond SBR

of MYK Arment or equivalent at dosage of 5Ltr per 50kg cement. (cement and sand shall be supplied by the main contractor)

Application of Primer: Apply Epoxy based primer FloArm Primer PUDC of MYK Arment or equivalent over well prepared surface at 200-400 gm per

Application of Polyurethane waterproof coating: Providing and applying Two coats of liquid applied single component polyurethane based

waterproofing system AquaArm SPU-SPL of MYK Arment or equivalent . It has to be applied @1.95 kg/sqmtr to achieve a thickness of 1.2 mm in two

coats.The membrane will have the following technical parameters: Tensile Strength : 2 N/mm² ,. Elongation at break : 400% , Adhesion To concrete:

Application of PUF insulation layer (60mm thick /depends on the U value): Providing & applying two component, closed cell, rigid, Polyurethane foam

AquaArm Insuspray PUF B2 of MYK Arment or equivalent at a thickness of 60mm for roof insulation on a cleaned & primed surface. The PU foam

insulation layer has to be sprayed with the help of two component GUSMER machines, which are capable of maintaining the mixing ratio accuracy at

+/- 2%.complete including all tools and tackles as per manufacturer’s specification.Typical properties are as follows: Core density: 43.8 kg/cum,

Dimensional stability: +/- 1%, Thermal conductivity u value: 0.4 W/mK, Flammability: class B3.

Application of Final Layer: apply two coats of an Sealing layer, an elastomeric, fiber reinforced waterproof coating AquaArm Roofshield of MYK

Arment or equivalent and allow the system to cure and dry. It shall be applied at the thickiness of 600 microns @ 1.5 Kg/ Sq.Mtr. The properties of

AquaArm Roofshield are as below: Solid Content 70 ± 3 % , Tensile strength (ASTM D412) > 1 Mpa , Elongation (ASTM D412) > 200 % , UV Radiation for

240 hours , (ASTM D 4587-01) No Color Change , Rapid Chloride Penetration (ASTM C 1202-2019) Very low , Pull off adhesion (ASTM D4541) 0.92 Mpa

Resistance to Algae growth- Passes , Resistance to 7 Bar water pressure for 72 hours (DIN 1048-Part 5) Pass , Water vapour transmission (ASTM E96)

6.0g/m² h , Solar Reflectance Index (SRI) (ASTM E 1980-19):

Providing and laying 150 Gsm Geo fabric membrane as separation layer

Protection Screed:Horizontal Areas: Providing and Laying M25 grade screed concrete in 1:100 to a average thickness of 100 mm mixed with Integral

Waterproofing admixture AquaArm Prufe IWP 10 of MYK Arment or equivalent at the dosage of 125 ml/bag of cement over waterproofing layer to a

minimum thickness of 75 mm as per site requirement(Civil Contractor Scope) including control joints of 4M X 4M size and filling the panels with

polyurethane sealant.

Surface Preparation: Providing and laying water proofing treatment to horizontal and vertical surfaces of concrete, including cleaning the surface

with wire brush, treating all surface cracks, construction joints and honeycombs by grouting with specialised non shrink grout,coving preparation at

wall - slab joint and preparation of surface in all aspects to receive the waterproofing.

Injection Grouting (If required): Providing Chemical injection treatment in the form of pressure grouting to the cold joint by injecting cement slurry

mixed with grout admixture ArmGrout Additives @ 250 gms.per bag of cement, in the required consistency through the pre fixed PVC nozzles in the

10mm dia holes, fixing of PVC nozzles with quick setting compound ReArm Fix 10S of MYK Arment or equivalent and final cutting the projected nozzles

and sealing off the PVC nozzles after the injection operation is over with quick setting compound , no shrink rapid setting mortar compound, finishing,

curing etc. as per manufacturers specification and as directed.If any lekages found in pre ponding then this need to be done.

Coving: Providing and Applying at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with SBR polymer ReArm Bond SBR

of MYK Arment or equivalent at dosage of 5Ltr per 50kg cement. (cement and sand shall be supplied by the main contractor)

Waterproofing Coating-Providing and application of a two component, cementitious acrylic polymer based high performance water proofing

coating AquaArm 2C P Plus of MYK Arment or equivalent . It offers seamless coating applied@ 2 Kg /Sqm for 2 coats @ 1.00 mm DFT .Technical Data:

Inter coat application time, Hrs 2-3, Tensile strength (ASTM D 412) >2 N/mm² , Elongation at break (ASTM D 412) >200%, Adhesion strength (ASTM D 4541)

>1.2 N/mm², Crack bridging (ASTM C 836) pass up to 2 mm.

Protective Plaster: providing and laying avg. 15 mm thick, CM 1:4 plaster admixed with Integral Waterproofing Compound AquaArm Prufe IWP 10 of

MYK Arment or equivalent @ 150 ml / bag of cement at Vertical Walls.Horizontal Protection: Providing & laying Screed horizontally to achieve the

desired slope it Should be admixed with with Integral Waterproofing Compound AquaArm Prufe IWP 10 of MYK Arment or equivalent @ 150 ml / bag

Toilet Sunk Filling : (not applicable for toilets with underslung plumbing) :

Providing and filling sunken area with Light Weight Block bat (40-60 mm) with cement mortar mixed in ratio 1:3:6 (1 cement : 3 sand : 6 brick bats)

including mixing of water proofing compound 4 % by weight of cement to sunk portions of toilets to the entire satisfaction of the PM. Toilet / Sunk

portion shall be tested by ponding water for 72 hrs.

Surface Preparation: Providing and laying water proofing treatment to horizontal and vertical surfaces of concrete, including cleaning the surface

with wire brush, treating all surface cracks, construction joints and honeycombs by grouting with specialised non shrink grout,coving preparation at

wall - slab joint and preparation of surface in all aspects to receive the waterproofing.

Waterproofing Coating-Providing and application of a two component, cementitious acrylic polymer based high performance water proofing

coating AquaArm 2C P Plus of MYK Arment or equivalent . It offers seamless coating applied@ 2 Kg /Sqm for 2 coats @ 1.00 mm DFT .Technical Data:

Inter coat application time, Hrs 2-3, Tensile strength (ASTM D 412) >2 N/mm² , Elongation at break (ASTM D 412) >200%, Adhesion strength (ASTM D 4541)

>1.2 N/mm², Crack bridging (ASTM C 836) pass up to 2 mm.

75 Protective Plaster: providing and laying avg. 15 mm thick, CM 1:4 plaster admixed with Integral Waterproofing Compound AquaArm Prufe IWP 10 of SQM 500.00 ₹ 1,351.25 ₹

MYK Arment or equivalent @ 150 ml / bag of cement at Vertical Walls.Horizontal Protection: Providing & laying Screed horizontally to achieve the

desired slope it Should be admixed with with Integral Waterproofing Compound AquaArm Prufe IWP 10 of MYK Arment or equivalent @ 150 ml / bag

Protection Cum Hygiene Coat: Providing & applying 2 coats of water-based epoxy hygiene coating, FloArm Coat EFG of MYK Arment or equivalent

@ 8 sqm / Kg / coat as directed by the manufacturer. The coating shall be Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA. Mixing Ratio (Base:

Hardner: Water) – 1:1:1, Adhesion strength: >1.5 N/mm2 as per ASTM D 4541 : 02, as per manufacturers' specification, etc, complete.

Coving: Providing and Applying at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with SBR polymer ReArm Bond SBR

of equivalent at dosage of 5Ltr per 50kg cement. (cement and sand shall be supplied by the main contractor)

Surface Preparation: Providing and laying water proofing treatment to horizontal and vertical surfaces of concrete, including cleaning the surface

with wire brush, treating all surface cracks, construction joints and honeycombs by grouting with specialised non shrink grout,coving preparation at

wall - slab joint and preparation of surface in all aspects to receive the waterproofing.

Waterproofing Coating-Providing and application of a two component, cementitious acrylic polymer based high performance water proofing

coating AquaArm 2C P Plus of MYK Arment or equivalent . It offers seamless coating applied@ 2 Kg /Sqm for 2 coats @ 1.00 mm DFT .Technical Data:

Inter coat application time, Hrs 2-3, Tensile strength (ASTM D 412) >2 N/mm² , Elongation at break (ASTM D 412) >200%, Adhesion strength (ASTM D 4541)

>1.2 N/mm², Crack bridging (ASTM C 836) pass up to 2 mm.

76 Protective Plaster: providing and laying avg. 15 mm thick, CM 1:4 plaster admixed with Integral Waterproofing Compound AquaArm Prufe IWP 10 of SQM 108.00 ₹ 1,265.00 ₹

MYK Arment or equivalent @ 150 ml / bag of cement at Vertical Walls.Horizontal Protection: Providing & laying Screed horizontally to achieve the

desired slope it Should be admixed with with Integral Waterproofing Compound AquaArm Prufe IWP 10 of MYK Arment or equivalent @ 150 ml / bag

Protection Cum Hygiene Coat: Providing & applying 2 coats of water-based epoxy hygiene coating, FloArm Coat EFG of approved make @ 8 sqm /

Kg / coat as directed by the manufacturer. The coating shall be Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA. Mixing Ratio (Base: Hardner:

Water) – 1:1:1, Adhesion strength: >1.5 N/mm2 as per ASTM D 4541 : 02, as per manufacturers' specification, etc, complete.

Coving: Providing and Applying at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with SBR polymer ReArm Bond SBR

of MYK Arment or equivalent at dosage of 5Ltr per 50kg cement. (cement and sand shall be supplied by the main contractor)

Providing and fixing 35 mm thick pre-laminated (1mm) hinged door made out of 150mm x 70mm cp-sag inidan teak wood outer frame with holdfast

and shutters made of 35 mm thick facory fabricated flush door including concealed lipping (35mmx6mm-matt malamine polished to exposed

surface) to receive hinges. colour and shade for laminates shall be as architect. All necessaty carpentery and civil work to fix in true line & level,

plumb at all level shall be part of contractor and commissioned as directed by EIC. Hardware shall be paid extra under relavent item. It is inclusive of

matt melamine polish (1 coat sealer + minimum 2 coat matt mellamine polish) with sanding, rubbing, etc. complete For single / double leaf shutter

without hardwares

METAL FIRE DOORS (120 Minutes) with 30 min insulation As per IS3614:

Supply and fixing of Hollow metal fire rated doors as per IS 3614:2021 for stability and integrity with 30minutes insulation. Pressed Galvanized steel

confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI /NABL Approved Labs for maximum

rating of 2hrs tested . Individual Test certificates should also be available for glass used in vision lites confirming the required fire ratings /panels being a

part of the fire door assembly. Doors should be finished in Thermosetting Powder Coating desired RAL Shades. Manufacturer test certificate shall cover Sq.mt 14.00 ₹ 6,500.00 ₹

doors both single & double leaf doors and Hardware's should pass European certificate "CE" of conformity / UL with required fire ratings. Any deviation

in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and

the hourly rating is mandatory. Approved manufacturer Navair International or equivalent subject to architect’s approval. And should be ISO

Certified company.

Door frame shall be Single rebate profile of section 100 x 57 mm made out of 1.60mm thick galvanised steel sheet with a factory pre-punched groove

so as to accomodate Fire & smoke seal size 10x4mm . Frames should be butt jointed and field assembled with bolting system for proper strength

.Frames should be provided with back plate for anchor fasteners (payable extra ) for installation on a finished plastered wall opening.

Door leaf shall be minimum 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2mm minimum

thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill

material shall be Rockwool treated with Viper FRS 881 LH. All doors shall be factory prepared for receiving appropriate hardware and provided with

necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors

astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per

manufacturers recommendation with a beading and screws from inside.

All doors and frames shall be finished with Powder coating in desired Shades.

79 Recessed Oval Flush Pull Handle 1207, SSS dormakaba or equivalent pcs. 1.00 ₹ 579.60 ₹

6 pin Euro profile knob cylinder with internal thumb turn and external coin operation standard length 60mm in satin nickle plated finish. NMK.Durability:

100,000 Cycles dormakaba or equivalent

5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm with Non-Removable Pin, Material: SS 304, Finish: Satin Stainless Steel (SSS). Suitable for Wooden

81 door weight up to 120kgs, Grade 13, Template Drilled. Approved to EN 1935, Fire-rated, Square Corners, Durability - 200,000 Cycles, Corrosion pcs. 24.00 ₹ 17,332.80 ₹

Resistance - Very High dormakaba or equivalent

82 4 Surface Mounted Tower bolt of Length 10" , SS 304, Satin Stainless Steel, dormkaba or equivalent pcs. 2.00 ₹ 2,265.50 ₹

Mortice WC lock 375a with 55mm backset, 20mm square forend with 78 mm centers and prepared for 8mm bathroom follower including strike plate

83 in satin stainless steel as per EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 pcs. 1.00 ₹ 2,423.05 ₹

Mortice dead lock 378a with 55mm backset, 20mm square forend, prepared for euro profile cylinder including strike plate in satin stainless steel as per

EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 C to +80 C)

Mortice dead lock 378a with 55mm backset, 20mm square forend, prepared for euro profile cylinder including strike plate in satin stainless steel as

per EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 C to +80 C)

86 Mortice shaft dead bolt with key with BS 57mm and 25mm Sq forend with escutheions in SSS. pcs. 1.00 ₹ 1,373.10 ₹

87 1 floor stop half dome with 45mm dia with fixing accessories, SS 304 in SS Finish pcs. 5.00 ₹ 2,323.00 ₹

88 escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel. pcs. 4.00 ₹ 1,927.40 ₹

Single electromagnetic lock with 600 lbf (2668 N) holding force, surface-mounted, with lock status sensor and red/green LED indicator,anodized

89 aluminium finish. Power supply: 12/24 V DC; Current: 500mA/250mA; Lock status sensor: yes; LED: yes; Magnet: 250L x 47.2W x 26.6H mm; Armature pcs. 4.00 ₹ 10,644.40 ₹

plate: 185L x 38W x12.5H mm.

Single electromagnetic lock with 600 lbf (2668 N) holding force, surface-mounted, with lock status sensor and red/green LED indicator,anodized

90 aluminium finish. Power supply: 12/24 V DC; Current: 500mA/250mA; Lock status sensor: yes; LED: yes; Magnet: 250L x 47.2W x 26.6H mm; Armature pcs. 2.00 ₹ 15,577.90 ₹

plate: 185L x 38W x12.5H mm.

91 Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finish. pcs. 1.00 ₹ 6,978.20 ₹

92 Concealed cable loop (Power Transfer) pcs. 1.00 ₹ 7,086.30 ₹

Pure Lever handle 8100 lever with round roses, escutcheons prepared for Euro profile cylinder and spindle 114 in satin stainless steel. Complete set

93 including the fixing accessories for 50mm thick door. Material:SS 304.Approved to EN 1906 , Fire Rated - 60 min ,Durability - 200,000 Cycles, Corrosion pcs. 1.00 ₹ 2,948.60 ₹

Resistance - Very High

Pure Lever handle 8100 lever with round roses, 7122 WC Indicator and spindle 114 in satin stainless steel. Complete set with fixing accessories for 50mm

thick door. Approved to EN 1906 , Durability - 200,000 Cycles, Corrosion Resistance - Very High

pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have

supporting washer with raised bevelling on the outer surface.CTC - 300mm, 22mm dia, Material - SS304

rack and pinion door closer TS 68 with selectable closing force, size EN 2, 3 and 4 , std. arm adjustable closing speed in two independent ranges. Non-

handed. Approved to EN 1154. Durability - 500,000 Cycles ,Corrosive resistance - Moderate, Finish:Silver

rack and pinion door closer TS 72 with adjustable closing force, size EN 2-4,Standard Arm closing speed adjustable in two independent ranges, with

97 adjustable latching action. Non-handed. Approved to EN 1154 ,CERTIFIRE and CE Marked. Durability - 500,000 Cycles, Corrosive resistance - pcs. 4.00 ₹ 50,347.00 ₹

Moderate,Finish:Silver

barrier free access designed cam action door closer complying to BS 8300 & ADM opening force of below 30N between 0º and 30º degrees and

below 22.5N between 30º and 60º degrees.Complies to CEN 15894 Guidelines of 40% reduced opening force & minimum 65% door closer efficiency.

98 Door closer with G-N slide channel arm for pull side fixing, adjustable closing speed in two independent ranges. closing force infinitely variable pcs. 1.00 ₹ 23,125.35 ₹

between size EN 1 and EN 4. Non-handed.

Approved to EN 1154 and CERTIFIRE, CE Marked. Durability - 500,000 Cycles, Corrosive Resistance - High. Finish: Silver

Frameless Swing Doors_(Patch Fitting Doors)

Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover Single & Double leaf double swing patch fitting door made out 12mm thick

fully tempered (FT) glass with Dorma high end / Ozone make stainless steel patch fittings for external facade application (PT Series ). Complete with

38mm dia SS handle 1000mm long , PT series patch fittings, US 10 Door lock at bottom of each shutter and BTS 80, 90 deg with EN 1-4 spring capacity

99 floor spring. Floor spring covers shall be SS satin finish. as per Architect's approved shop drawings. Approved Make - Ozone OR Dorma NOS. 1.00 ₹ 79,200.00 ₹

Door glass of 12 mm thk clear float fully tempered with holes and notches as per patch fitting requirement. Edges Machine ground mirror polished.

The door glass shall have silicon gasket at bottom to act as weather seal.

All Material Make / Vendor list / Supplier list shall be as per tender specification.

The quote rate shall include all design & shop drawing approval from architect & consultant.

Quote rate for complete system for Frame Less Patch Fitted Door as mentioned above under (F)

Double Leaf Swing Door

Aluminium Sliding/Fix windows

Design, Fabrication, Supply, Installation, Protection, Cleaning and Handover 30mm jindal domal series Sliding Windows of 2-3 Track / 2-3 Shutter This

window system of Alloy 6063 T5 / T6 in line with Drawing. The contractor shall be followed the tender drawings. The Sliding Shutter will slide on Track

with approved quality of nylon Rollers (Single Adjustable Roller for Window and Double Adjustable Roller For Door) . All Sliding Shutter shall have

interlocking Profile all inline with Tender Drawing. The Window accessories include Flush Lock , 6.9mm Wool Pile with 2 Silent fin, Anticapillary Pad,

Shutter guide, Cover Cap and Corner Cleat of approved make. The System and Glass shall be designed to withstand wind pressure of Maximum

Kg/m2 at all levels, elevation & heights. All screws, washers used shall be only stainless steel of 304 grade. Provide EPDM Gasket, exterior and Interior

perimeter sealants with Dow Corning DC / GE, where the glazing abuts other adjacent materials such as concrete shear walls. The contractor must

100 design the system as per the prevalent site conditions and building elevation profiles. SQM 278.00 ₹ 9,000.00 ₹

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. The structural profiles shall

have minimum 1.8mm wall thickness. All the internal visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of

60 - 80 micron confirming to AAMA 2604 & The non visible aluminium surfaces shall have minimum chromatizing treatment.

All Material Make / Vendor list / Supplier list shall be as per tender BOQ specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all Design & shop drawing approval from architect & consultant.

Quote rate for complete sliding and fix window system including Glass:-24mm DGU:- (6mm Thk Reflective (ST/ET Series) HS Glass + 12mm Thk. Air Gap +

6mm Thk. Clear HS Glass) (As per Client / Architect Approval sample)

Aluminium Louvers ( "Y" Type Louvers) System for Windows

Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover of Aluminium " Y " shape Louvers with stand the design wind pressure

confirming to IS -875 part III.

Aluminium Louvers shall be made out of 60mm x 36mm x 1.5mm thk. of " Y " shape louvers spaced at equivalent distance support to Aluminium

frame. Louvers profile shall be fixed on the 3mm thick Al flat to form a frame. The louver frame is supported on the aluminium box frame with

necessary fasteners in SS 316. Louver Door Shutter shall have Hinges (Wooden Door) SS grade316 with tower bolt & one point Lock With handle as per

approved sample in line with tender drawing.

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. The structural profiles shall

have minimum 2 mm wall thickness. All the internal & External visible surfaces shall have Super Durable Powder coating finish of 60-80 micron

101 thickness as per Approved shade by Architect. The non visible aluminium surfaces shall have mill Finish. SQM 14.00 ₹ 74,800.00 ₹

All Material Make / Vendor list / Supplier list shall be as per tender specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all design & shop drawing approval from architect & consultant.

Quote rate for complete Aluminium Louvers system as mentioned above

Providing, supplying, and installing manually operated movable wall partition system of Variflex Solid 100U or approved equivalent, designed for

102 flexible spatial division with high acoustic insulation (minimum Rw 57 dB) performance. The system shall be installed complete with all hardware, NO. 1.00 ₹ 7,101,005.05 ₹

suspension tracks, seals, and accessories as per manufacturer’s specification and approved shop drawings.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

105 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete. CUM 47.00 ₹ 594.61 ₹

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed

106 together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and SQM 778.00 ₹ 4,450.51 ₹

outside locking with push-pull operation including the cost of hood cover and spring etc. complete. (B) Shutters having width 3.5 M. and above

107 Providing and fixing 27.5 cm. long wire spring grade No.2 of approved make for rolling shutters. EACH 110.00 ₹ 630.91 ₹

108 Providing and fixing Hood cover for rolling shutters (B) Shutters having width 3.5 meters and above RMT 1745.00 ₹ 125.47 ₹

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer

and reverse side of adhesive bonding quality conformingto IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Supply and installation of factory-made modular toilet cubicle system – Titan SS Model, fabricated from 12mm thick Merino Compact High Pressure

Laminate (HPL) boards, in single standard compact colour, complete with stainless steel fittings and accessories, as per manufacturer’s specifications

and approved shop drawings. Size of Cubicle : As per Drawing (W) X (D) X 1980mm (H)

Door Size : 1750mm (H) X 600mm (W)

Divider Size : 1775mm (H)

Overall Height Of Cubicle : 1980mm (Including bottom Gap of 150mm)

Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories)

a) SS "U" Channel

110 b) SS "F" Channel (Only Corner Unit) NO. 51.00 ₹ 38,721.73 ₹

c) SS Door Stopper Channel

e) SS Coat Hook

f) SS Privacy Thumb turn c/w Occupancy Indicator

g) SS Door Knob

h) SS Spring Loaded Butt Hinges with Cover

i) SS Adjustable Foot - 316 Grade

j) Rubber Lining for Door Stopper

k) Screws & Wall Plugs

Providing and fixing 6mm thick frameless mirror of approve make in any shape and sizes as per drawing. Mirror shall be fixed on 12mm thick marine

plywood backing. Marine plywood shall be fixed to wall with approved SS 304 fastener. All edges of glass shall be sharp grinded, cut corner and

polished. Glass shall be fixed with approved adhesive/ 3M tape etc. complete at all floors/ all levels/ all heights as directed by Engineer In Charge.

Installed area of mirror shall be considered for payment without wastage.

Design, Supply, Fabrication, Erection, and Installation of Complete Tensile Membrane Structure for canopy area, including all elements: a) Membrane:

Serge Ferrari Soltis FT 381 or equivelent, minimum 950 microns, color as per selection/Translucent, UV-resistant, and weatherproof. b) Steel Structure:

Supply and erection of factory-fabricated structural steel supports, posts, and edge members of Mild Steel as per design with Hot-Dip Galvanized and

112 Color Coated finish. c) Cables & Hardware: Supply and installation of all necessary structural cables, stainless steel fittings (shackles, tensioners, Sqm. 70.00 ₹ 25,000.00 ₹

membrane plates, etc.), and anchor bolts. d) Foundation/Civil Work: Complete foundation work (excavation, concrete, grouting of columns, etc.) as

per approved structural drawings. e) Certification: Including all structural design, shop drawings, analysis reports, material test certificates, and 15 year

Providing and fixing Roller blinds (80% black out, made out of 70% PVC, 30% Polyester) of approved make as per the manufacturer's specifications

with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains etc. Drive unit to be of moulded plastic with straight rectangular support

pin and inserted into the tube end. It shall be driven by a ball chain pulley. End plug shall be moulded to plastic locking pin. The plug shall be inserted

into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic covers and used in right or left hand positions

differentiated by acceptance of the rectangular drive unit support or the round idler plug pin. Roller tube shall be made out of roll formed steel of

thick. Suitably protected against corrosion, and keyway integral with the tube to accommodate the spline. Bottom rail shall be a stiffening element

inserted into a bottom rod pocket. Tube to be of the material as approved out of timber, PVC, steel or VB bottom rail. Ball chain shall be 2mm

diameter cord with acetyl balls moulded co-axially to it on 6mm pitch to form ball chain.

Polycarbonate sheet - Providing and Fixing of sky lights consisting of MultiCell COXWELL / SUNLITE make Polycarbonate Panel System of approved

colour, 20 mm thick having uniform in color, Vertical Standing Seam manufactured a t both sides of the panel. Snap‐on connector to interlock the

panels shall have a grip‐lock double tooth locking mechanism to ensure maximum uplift capability. Panel shall in fixed with Aluminum / S.S. Cleat.

Panel shall be Aluminum End‐cap for ends. Panel shall be co‐extruded UV protected in a width of 900mm / 915mm. The full system shall be fitted on

114 MS purlins perpendicular to direction of sheeting with purlin spacing as specified by Manufacturer. At wall side end Z Type Polycarbonate Flasher Sq.m 191.00 ₹ 6,800.00 ₹

made from 2mm Thick UV Protected sheets should be applied to ensure water leakage from wall end. The rate includes cost of all the operations,

labour and all materials involved such as bolts nuts and screws etc. and labour for cutting bending to required profile. Rate shall include. Sheet

Supply + All Types of Sheet Fixing, Accessories + Polycarbonate Wall Flashers + Sheet Fixing Labour + All Required Screw, Tools, Tackles and Fixtures +

Freight. Warranty Cover : 10 Years Manufacturing Warranty. UV Coating : Both Side UV Co ‐ Extruded

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

115 accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable kg 938.00 ₹ 633.37 ₹

arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.). as per drawing

Infill pvc chain-link mesh size 40x40mm wire dia-10 Guage

frame size H- 1250 x W 2500 +/-10mm Post C-C

Frame L ANGLE 50x50x6mm

Post SHS 50x50x3.6mm Mounting Base Plate 150x150x6mm

Accessories: Nuts_GI Expansion_@M12X150mm

Mono Rail Mechanical Crane with Chain Pully Block Supply, erection, testing and commissioning of single girder type mechanically operated

operated crane with chain pully operated hoist, geared trolley, railtrack, moving or cross girder, brake, safety device, locking arrangement and all

other required accessories as per data sheet and specification. Capacity: 2.0 Ton 2.00 Set 6,10,000.00 12,20,000.00 Span: 12.5 mtrs.(min) Lift: 5.00 mtrs.

(min) Bay length: 25 mtrs

WORKSTATION (ONE SIDE/ Non sharing ) TABLE SIZE:-1100 x 600 & 750/1100 mm height

TABLE TOP 25mm thick made of plb top. Table Top will be provided with matching edgebending and aluminum flip up provision of size:-

350mm(W)x135mm(D) anodized finish with necessary switches sockets and cable manager etc complete. Screen :- 8mm thick coloured glass with

necessary brackets for fitting

Legs: Metal Powder coated legs C type leg 50mmx50mmx1.2mm : all Under structure: Metal powder coated with 50-60 micron:

Cable Management: Wire trunking to be provided made up of MS below worktop with clear data power seperation, single trunking system to be

provided with Electrical panel to take wires into the cable manager.etc. finish with all necessary hardware and material selection as per architect.

(without pedastal)

WORKSTATION (ONE SIDE) TABLE SIZE:-1100 x 600 & 750/1100 mm height

TABLE TOP 25mm thick made of plb top. Table Top will be provided with matching edgebending and aluminum flip up provision of size:-

350mm(W)x135mm(D) anodized finish with necessary switches sockets and cable manager etc complete. Screen :- 8mm thick coloured glass with

119 necessary brackets for fitting nos. 1.00 ₹ 31,050.00 ₹

Legs: Metal Powder coated legs C type leg 50mmx50mmx1.2mm : all Under structure: Metal powder coated with 50-60 micron:

Cable Management: Wire trunking to be provided made up of MS below worktop with clear data power seperation, single trunking system to be

provided with Electrical panel to take wires into the cable manager.etc. finish with all necessary hardware and material selection as per architect.

Meta Round Table with 18mm Prelaminated top and MS powder coated single pole leg. Available in square as well as round shape. Size: 500mm Dia

and 1100mm*600mm*450mm H for square table

TRENT SIDE TABLE- Top, side and back made of 18mm Prelaminated particle board which is iso certified. Lipping is of 0.8 to 2mm. With upper drawers

and bottom storage Complete knock down construction, levellers are used for uneven surfae

Quip Midback Ergonomic Desk Chair: 65D x 63W x 100H Centimeters Centimeters, Ergonomic features include like seat height, height adjustable

Armrest, & lumbar adjustment. Seat made of 40Kgm/3 density, back made of breathable mesh.Dimensions of Quip: Height- 100 to 108.5 cm

122 (Adjustable) Width- 63 cm & Depth- 65 cm | Item Weight: 19 kg 900 gram | Incline Up to 20 Degree Max | Seat Material Type: Molded PU Foam nos. 12.00 ₹ 16,675.00 ₹

cushion with fabric upholstery | Back Style: Mesh Back | Colour: Black | Frame: 5 Star Nylon Plastic | Included Component:‎ Back Support, ID Arm Rest

with PU Pad, Chair, Synchro-Tilt Mechanism.

Budd Faux Leather Executive Side Chair with Sled Base in Black. Size: 59.5D x 61.8W x 81.5H Centimeters, 4 Plastic bushes for the sled base to avoid any

123 scratches on the flooring & ease of movement. Seat and back made of artificial faux lather with 40kgm/3 density. In-built lumbar support, integrated nos. 4.00 ₹ 1,282.25 ₹

comfy padded armrest.

Providing and supply Sofa sturcture made from 18mm MR Grade Mr grad plywood supported with Maranti Solid wood, back side and curved part

Covered with 3mm flexi ply, sofa arm made from 12mm thick MR Grade Mr grad plywood supported with maranti solid wood. Elastic Belt, 75mm

board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt fastern in X and Y axies of seat, elastic belt

elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality

Foam for soft touch filling in seat. 50 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality foam for soft

touch filling in back. Stiching Stiching work done with well known german brand (Aman / Gutermann) Thread. Nylone & Polyster thread used as per

application. Stainless steel U shaped frame, size 2 inch wide and 8 mm thick SS 202 Grade plate used in sofa for legs.(Basic Rate of Fabric/Rexin-450/-

Providing and supply Sofa sturcture made from 18mm MR Grade Mr grad plywood supported with Maranti Solid wood, back side and curved part

Covered with 3mm flexi ply, sofa arm made from 12mm thick MR Grade Mr grad plywood supported with maranti solid wood. Elastic Belt, 75mm

board & 2.25 mm thick elastic webbing stapling in seat frame at 100 mm centre to centre distance, belt fastern in X and Y axies of seat, elastic belt

elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality

Foam for soft touch filling in seat. 50 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft Premium Quality foam for soft

touch filling in back. Stiching Stiching work done with well known german brand (Aman / Gutermann) Thread. Nylone & Polyster thread used as per

application. Stainless steel U shaped frame, size 2 inch wide and 8 mm thick SS 202 Grade plate used in sofa for legs.(Basic Rate of Fabric/Rexin-450/-

CENTRE TABLE-SQUARE SHAPE

Providing fixing and arranging Center Table top made out from Top & Shelf 25mm thick MDF with 1mm thick laminate with with 2 mm thick PVC

edge bidding finish.Uder structure made of 25x25x1.6mm thick MS sq pipe with powder coated.with all necessary hardware included

127 1200Wx600Dx450H TeaTable top made out from Top & Shelf 25mm thick MDF with 1mm thick laminate with with 2 mm thick PVC edge bidding nos. 3.00 ₹ 13,800.00 ₹

finish.Uder structure made of 25x25x1.6mm thick MS sq pipe with powder coated.with all necessary hardware included.

Low Height Storage with Openable Shutter

Dimensions : 5400mmL x 450mmD x 750mmHT

Specifications:

Top & Sides : 18mm Thk pre laminated particle board

128 Back : 9mm Thk pre laminated particle board nos. 1.00 ₹ 39,305.00 ₹

Shutters : 18mm Thk pre laminated particle board

Edge : All exposed area with 2mm thick PVC edge lipping

Handle : Finger groove handle

Lock : Regular lock

Full Height Storage with Openable Shutter

Dimensions :as mentioned

Specifications:

Top & Sides : 18mm Thk pre laminated particle board

129 Back : 9mm Thk pre laminated particle board nos. 4.00 ₹ 23,234.00 ₹

Shutters : 18mm Thk pre laminated particle board

Edge : All exposed area with 2mm thick PVC edge lipping

Handle : Finger groove handle

Lock : Regular lock

Low Height Storage with Openable Shutter

Dimensions : 900mmL x 450mmD x 750mmHT

Specifications:

Top & Sides : 18mm Thk pre laminated particle board

130 Back : 9mm Thk pre laminated particle board nos. 2.00 ₹ 6,551.00 ₹

Shutters : 18mm Thk pre laminated particle board

Edge : All exposed area with 2mm thick PVC edge lipping

Handle : Finger groove handle

Lock : Regular lock

Storage Cupboard Overall Size 1980mm (H) x 900mm (W) x 450mm (D) Top made of 20 mm thick made of PLY bothside covered 1 mm thick laminate

finish ,sides 18 mm thick PLY bothside covered 1 mm thick laminate finish.9mm thk PLY bothside coberd with laminate finish.Skirting and Front

Shutters/drawer fascia , shelfs made of 18 mm thick ply bothside covered 1 mm thick laminate finish with necessary hinges and lock. Shutter hanging

on Hinges, Lock and handle are consealted or profile or groove handle less etc.All edge 2mm thick Pvc beading matching with laminate will be

provided.etc all necessary hardware included and complete as per image and detail design and drawings. all laminate shaed are to be as per

architects's selection.

Low Height Storage with Openable Shutter

Dimensions : 5400mmL x 450mmD x 750mmHT

Specifications:

Top & Sides : 18mm Thk pre laminated particle board

132 Back : 9mm Thk pre laminated particle board nos. 16.00 ₹ 27,600.00 ₹

Shutters : 18mm Thk pre laminated particle board

Edge : All exposed area with 2mm thick PVC edge lipping

Handle : Finger groove handle

Lock : Regular lock

Providing and Placing Single Bed –Providing and supply Hostel Single bed 2050mm L X 975mm W X 750mm headboard with combination of Tubular

Steel, Particle Board and slatted mattress base with headboard. Material: Headboard panels are made of 18 mm thick Pre laminated Particle board.

All the exposed edges should be edge banded with 2 mm thick PVC edge banding. Bed Leg Frame Structure consists of metal frames made of M.S.

50 x 50 mm box section in 1.2 thicknesses. Internal pipes are made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x

25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Hardware: The High quality hardware should are used.

Construction: Knock down construction Finish: 18 mm thick pre laminated particle board, Bed leg frame structure is powder coated in shade To

thickness of 50 microns (+/- 10) Rest all metals are powder coated in shade to thickness of 50 microns (+/-10) The rate shall include all materials,

hardware and labour etc. complete.

Providing and fixing out door table with 4 chair and umbrella in built. Furniture should be weather resistance and uv protected. cafeteria table with an

overall size 900x900x450mm. The top shall be made up of 20mm thick granite top with moulding, shade of granite will be as per selection. The top shall

134 be supported on SS rectangle pipe frame having cross‐section area 70mm X 20mm with 1.6mm thick. The understructure shall consist of four legs nos. 18.00 ₹ 103,500.00 ₹

made up of ss round pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall be powder coated

to dry film thickness of 40‐60μ. There shall be PPCP shoe provided at bottom to avoid scratches on the floor.

Supply, Installation, and Commissioning of External Heavy-Duty Steel Litter Bin made from SS 304, with separate 3 type of watse collection having

capicity of 100 liters each. It should be fixed with necessory frame to floor as per EIC etc all complete

Supply, Installation, and Commissioning of External Heavy-Duty Steel Litter Bin made from SS 304, having capicity of 20 liters each.etc all complete as

Providing and fixing Building Name - Aluminium Channel Letter with Led with Specifications: Supply and installation of 1mm thick and 110mm depth

and 1 m high Aluminium Channel letters with 25mm Jewellite Trim cap (USA Made) proper backside fabrication with 3mm acp female and 4mm LED

137 GRADE acrylic having led of GOQ 3 Genius 2835 having 5 years warranty and power supply of Union/E-power with 5 years warranty. Wiring to be Nos/letter 3.00 ₹ 7,000.00 ₹

done by using 1.5mm wire of Finolex brand. Led Specs- 5 Years warranty Power dissipation, 1.08W, View angle ‐ 175 Luminous flux ‐ 90lm, Colour cct ‐

Pure White, 10000k Cool, white Dimensions (mm) 66*15*10.5. all mock up and shop drawings to be prepared by vendor for review and approval of EIC.

Entrance Signage - Providing and fixing at location a signs made up of Cosign India Pvt Ltd make I sign -display signage with 100 mm depth, 2400 high,

600 wide Aluminium extrusion Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium

billet) with Premium grade Anodizing (Thickness 15- 20 microns) Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under

138 normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of Nos 4.00 ₹ 86,000.00 ₹

65 mm depth for internal M.S structure.Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape .assembled totem can be

edge lite with help of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed with internal M.S structure are

installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Parking Signage - Providing and fixing at location a signs made up of Cosign India Pvt Ltd make I sign -display signage with 100 mm depth, 1800high,

600 wide Aluminium extrusion Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium

billet) with Premium grade Anodizing (Thickness 15- 20 microns) Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under

139 normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of Nos 8.00 ₹ 76,000.00 ₹

65 mm depth for internal M.S structure.Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape .assembled totem can be

edge lite with help of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed with internal M.S structure are

installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Directional signage - 750x450 mm - Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008

tensile strength 190 MPa made from virgin homogeneous aluminium billet) with premium grade anodizing (Thickness 15-20 microns) as per

international standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm each 2 frame

140 works joint back to back togther by virtue of profile designs creating one 3.5 mm gap for aluminium projecting flag insertion and fiting ,wall projecting Nos 22.00 ₹ 2,400.00 ₹

plastic bracket to be slide futted and locked with flag profile.Media of thickness upto 3mm. 2 mm thick acrylic/ACP. I-sign Fix profile of Cosign make

with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified locationas per drawing to the satisfaction of the

engineer-in-charge

Toilet Signage - Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008

tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade anodizing (Thickness 15-20 microns) as per

international standards, with 10 years warranty under normal working conditions.Sign is double sided 50 mm depth profile with media accomodation

141 depth of 6 mm media of ACP/ acrylic upto 5 mm thickness.Frame with 2 round corners , round corners made up of cast aluminium material with outer Nos 18.00 ₹ 4,800.00 ₹

radius of 80 mm .Can be pasted directly on frames or attached on frame with help of dual lock tape.Sign can be edge lite with help of edge lite led

modules ,led of LUCOLED make EL31 , fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the

engineer-in-charge.

area Signage - 1200 high Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as

142 per International standards, with 10 years warranty under normal working conditions.Sign is double sided 24 mm depth profile with media Nos 18.00 ₹ 5,000.00 ₹

accomodation depth of 5 mm media of ACP acrylic upto 3 mm thickness can be pasted directly on frames or attched on frame with help of dual

lock tape. Sign to be fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by

143 spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge cum 100.00 ₹ 78.10 ₹

or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

GROUND PREPARATION:

SOIL INFILL FOR PLANTING = 15% ORGANIC MANURE + REMAINING SEDYLOAM SOIL

Note: Rates shall be deemed to include for addition of fertilizer, all staking, wrapping, and tying of trees, watering, mulching with 50mm approved

mulch, maintenance etc as described.

SOIL MIX - Providing, and laying of all kind of good original and / or engineered soil as approved as Garden earth and manure, all of good quality,

and laying in slope/ mound as per site condition and to a minimum depth of 1.0m where allowed. Soil shall be provided by the contractor from an

approved location. The contractor has to insure that the soil should be fine in texture, free from stones, gravels, plant roots, branches and any other

unwanted material, if any. Transportation of soil upto the desired location/ locations at site shall be under contractor’s scope. Other required tools &

tackles to be arranged by contractor. Spreading shall be done as desired level as per the drg given.

Supplying good earth: Providing well draining good earth including transport, spreading and mixing etc. all complete as per direction of Engineer-in-

charge, the soil should be fine in texture, free from stones, gravels, plant roots and weeds.

Supplying of organic manure: Organic manure should be well rotten and of standard quality (Preferably Dynamic lifter). Manure shall be well mixed

with good earth and sand in proportion of 30% well rotten farm yard compost atleast one year old, 25% sand and 45% local soil. The supply of the

manure shall be in 50kg bags including transportation upto site & internal transportation at desired locations.

SUPPLY AND INSTALL -Trees/ Palms/ Shrubs/ Ground Covers

Rates shall be deemed to include for addition of fertilizer, all staking, wrapping, and tying of trees, watering, maintenance etc as described.

CALIPER : The diameter of the main trunk at the time of procurement,at 300mm above ground level.

OVERALL HEIGHT: Height of the plant at the time of procurement measured from the top of the soil level in polybag till the top of foliage.

CLEAR TRUNK HEIGHT: The height of the clear trunk below the start of branching at the time of procurement,measured from the top of soil level in

polybag till the point of start of branching.

Soil Mix Ground cover, Lawn,Shrubs,Trees

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 21"x21" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting.

Name - Terminalia Mantaly (Common name : Indian Tulip Tree)

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

146 or in rows or in cluster as per Drawings. The poly bag size should be 21"x21" or more. the tree should be green and full of branches and leaves. All plant NOS. 8.00 ₹ 2,300.00 ₹

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting. Name - CASSIA JAVANICA

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 21"x21" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting. Name - MIMUSOPS ELENGI |

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 21"x21" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting. Name - ROYSTONEA REGIA

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 21"x21" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting. Name- AILANTHUS EXCELSA

Supplying and planting of tree as per under noted varieties, with height of 8' to 10' , including excavation of pit of size 24"x 24"x 24" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 18"x18" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting.

Providing and stacking of Plumeria alba (Common name : Champa'White')

Supplying and planting of tree as per under noted varieties, with height of 1.5 ' to 2' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 10"x10" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting.

Name - CANNA INDICA (ORANGE)

Supplying and planting of tree as per under noted varieties, with height of 1.5' to 2' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 10"x10" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting.

Name -CANNA INDICA (YELLOW)

Supplying and planting of tree as per under noted varieties, with height of 1.5' to 2' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 10"x10" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting.

Name - CANNA INDICA (RED)

Supplying and planting of tree as per under noted varieties, with height of 1.5' to 2' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 10"x10" or more. the tree should be green and full of branches and leaves. All plant

154 material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought NOS. 34.00 ₹ 230.00 ₹

before planting.

Name - IXORA COCCINEA | RUGMINI

Supplying and planting of tree as per under noted varieties, with height of 0.5' to 1' , including excavation of pit of size 30"x 30"x 30" , removal of

excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to large tree as per specifications and as

directed complete in all respect including watering and nurturing and providing necessary support to the trees. The trees may be planted individually

or in rows or in cluster as per Drawings. The poly bag size should be 8"x8" or more. the tree should be green and full of branches and leaves. All plant

material and its sizes and height/growth and crown should be shown to the landscape architect/ Project Manager & written approval to be sought

before planting. Name- DURANTA REPENS

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving), including excavating the soil to

a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the excavated bed with

approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and as directed complete

156 in all respect, including watering and nurturing the plants. The poly bag size should be 13"x13" or more. the plant should be green and full of branches NOS. 14.00 ₹ 4,025.00 ₹

and leaves. Height & spread to be measured above polybag top.

Rhapis Excelsa Palm; ht. 75 cm to 90 cm with 12 to15 equal suckers,60 cm c/c distance

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving),Hwight upto 0.5' to 1' including

excavating the soil to a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the

excavated bed with approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and

as directed complete in all respect, including watering and nurturing the plants. The poly bag size should be 10"x10" or more. the plant should be

green and full of branches and leaves. Height & spread to be measured above polybag top.

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving),height upto 1.5' to 2' including

excavating the soil to a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the

excavated bed with approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and

as directed complete in all respect, including watering and nurturing the plants. The poly bag size should be 8"x8" or more. the plant should be green

and full of branches and leaves. Height & spread to be measured above polybag top.

NAME- TECOMA GAUDICHAUDI

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving), height upto 1.5' to 2' including

excavating the soil to a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the

excavated bed with approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and

as directed complete in all respect, including watering and nurturing the plants. The poly bag size should be 10 "x10" or more. the plant should be

green and full of branches and leaves. Height & spread to be measured above polybag top.

PANDANUS SPANDANUS

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving), height upto 0.5' to 1' including

excavating the soil to a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the

excavated bed with approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and

as directed complete in all respect, including watering and nurturing the plants. The poly bag size should be 8 "x 8" or more. the plant should be

green and full of branches and leaves. Height & spread to be measured above polybag top.

WEDELIA TRILOBATA

Providing, planting and developing plants/ flower bed with under noted varieties of plants (both shade & sun loving),height upto 1.5' to 2' including

excavating the soil to a depth of 18"x 18"x 18" of required area as per plant species, removal of excavated earth to directed location, filling the

excavated bed with approved soil mixture and sweet soil, planting the approved variety plants, providing strong stack etc. as per specification and

as directed complete in all respect, including watering and nurturing the plants. The poly bag size should be 10"x10" or more. the plant should be

green and full of branches and leaves. Height & spread to be measured above polybag top.

CROSSANDRA INFUNDIBULIFORMIS

Supplying and laying of carpet lawn — Providing and laying carpet lawn grass on a properly leveled surface, including supply, transportation, and

162 planting of healthy grass mats, watering, and maintenance till grass establishes. The rate shall be inclusive of all materials, labour, and tools required NOS. 66.00 ₹ 1,725.00 ₹

for completion of work. JACQUEMONTIA PANTANTHOS

Supplying and laying of carpet lawn — Providing and laying carpet lawn grass on a properly leveled surface, including supply, transportation, and

163 planting of healthy grass mats, watering, and maintenance till grass establishes. The rate shall be inclusive of all materials, labour, and tools required SQM . 352.00 ₹ 333.50 ₹

for completion of work. CYNODON DACTYLON

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuffupto 50 Meter lead.(A) Loose or

166 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete Cum 1056.00 ₹ 455.63 ₹

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Brick-masonry underground C.I. inspection / chamber (with C.I. cover & frame, RCC top slab, foundation, finishing) — corresponds to inspection-

chamber / catch-pit / underground sump-type chamber.

169 Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. Nos 23.00 ₹ 1,997.22 ₹

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (SIZE

AS PER DRAWING)

Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical gating

Constructing brick masonry road gully chamber1100mm x 775mm including 500mm x 450mm (C.I. horizontal grating with frame and vertical grating

Valve Chamber with Heavy Duty FRP Recess Manhole cover (600MM X 600MM) with Frame & RCC top slab

(Refer typical section drawing)

173 600 x 600 mm size 0 to 1.0 mtr depth Nos 21.00 ₹ 30,000.00 ₹

174 800 x 900 mm size 0 to 0.9 mtr depth Nos 8.00 ₹ 28,000.00 ₹

175 1200 x 900 mm size 0 to 2.5 mtr depth Nos 11.00 ₹ 35,000.00 ₹

176 1200 x 900 mm size 0 to 1.0 mtr depth Nos 1.00 ₹ 25,000.00 ₹

177 CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear opening etc. comp.. As directed by engineer in charge. NOS 106.00 ₹ 1,377.64 ₹

178 catch pit chamber

179 600 x 600 mm size 0 to 0.9 mtr depth Nos 75.00 ₹ 25,000.00 ₹

180 800 x 900 mm size 0 to 1.5 mtr depth Nos 20.00 ₹ 27,000.00 ₹

181 1200 x 900 mm size 0 to 2.5 mtr depth Nos 2.00 ₹ 35,000.00 ₹

182 1400x900 mm size 0 to 4.00 mtr depth Nos 9.00 ₹ 45,000.00 ₹

Construction and installation of Oil & Grease Trap including: excavation, RCC / brick masonry chamber, inlet & outlet channels, provision of baffles,

183 removable grease collection tray, cover, and finishing as per standard practice. Works include curing, testing, and commissioning. Nos 2.00 ₹ 45,000.00 ₹

(As per attched drawing)

Thrust Block (Refer typical section drawing)

Reinforcment Steel Kg. 985.00 ₹ 75.46 ₹

186 900 X 900 x1500 mm RCC Valve Chamber with 600X600MM FRP surface heavy duty chamber solid cover with Frame. Nos. 2.00 ₹ 27,000.00 ₹

Excavation in all sorts of soils including hard rock/ murrum for required depth and back filling. Contractor's scope of work under this item shall include

disposal of surplus earth and shoring, shuttering and dewatering if required. Excavation shall be done as per directions of Engineer-in-charge.

Necessary brick for protection, sand filling, cable route marker at @30 mtr and turning shall be part of supply & installation & also it shall be included in

Square meter charge.

189 1000 mm wide and 750 mm deep Cum 150.00 ₹ 253.58 ₹

190 1000 mm wide and 900 mm deep Cum 15.00 ₹ 253.58 ₹

191 1000 mm wide and 1000 mm deep Cum 35.00 ₹ 253.58 ₹

192 600 mm wide and 600 mm deep Cum 235.00 ₹ 253.58 ₹

Providing 1050 mm(B) x 1005 mm(W) X 1000 mm(D) manhole complete with 6" thick brickwall, plastering on both sides and providing Water tight cover

complete in all respect.

Providing 600 mm(B) x 600 mm(W) X 600 mm(D) manhole complete with 6" thick brickwall, plastering on both sides and providing Water tight cover

complete in all respect.

Cable Trench - Constrution of RCC Cable trench with water tight cover as per following Size for providing passages to lay the cables.(as per Detail

Provided in drawing) including excavation and necessroy filing complete entire job as per detail esign and drawings

195 1000 mm wide and 1000 mm deep Mtr 32.00 ₹ 18,000.00 ₹

196 600 mm wide and 600 mm deep Mtr 25.00 ₹ 12,000.00 ₹

197 1000 mm wide and 750 mm deep Mtr 200.00 ₹ 14,000.00 ₹

198 1000 mm wide and 900 mm deep Mtr 15.00 ₹ 15,000.00 ₹

Constrution of Boundary Fencing and other Allied works at 11KV Substation as per Detail Provided by Consultant and approved by Engineer in

SPRINKLER , DRIP & HYDRANT IRRIGATION SYSTEM

Providing & fixing of following dia. white PVC pipe conforming to ASTM D 1785 SCH 40 or D 2241 Class 200/315 standards with all fittings and

accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. as required with Excavation & Backfilling upto 450mm for

for submian depth. Make: Rainbird/Astra/Smartflows/Supreme

200 PVC Pipe Sch 40 / Class 200 2" - 63mm Mtr 66.00 ₹ 398.00 ₹

Drip & Accessories

Providing, installing, testing and commissioning of flexible,kink resistant 16mm inline tubing with pressure compensating, self flushing mechanism , Flat

203 emitter and resistance to UV damage, algae growth brown in colour from outer surface and black innter surface, with flow rate 2 to 4 lph, dripper Mtr 4104.00 ₹ 54.00 ₹

spacing 18" Pressure rating 0.58 to 4.1 kg/cm2 wall thickness 1.2mm Make: Rainbird/Smartflows/Toro/Netafim

Providing, installing, testing and commissioning of High Quality Grab Tubing for a Secure Fit. Unique Design to Reduce Insertion Force. Non - Obtrusive

204 17mm Insert Fittings - Brown Color - Take Off, Elbow,Tees, End Cap with PP Clamp Saddle having nuts and bolts in zinc chromed steel, o-ring gasket Set 82.00 ₹ 209.00 ₹

in NBR. Male: Rainbid/Toro/Smartflows/Netafim

205 Providing, installing, testing and commissioning of 9" Long Galvanized Lateral Hold Stake Make: Rainbird/Toro/Smartflows/Netafim Nos 821.00 ₹ 17.00 ₹

Sprinklers & Accessories

Providing, installing, testing and commissioning of 4" Pop up spray head with SAM PRS Series Spray bodies , having Co-moulded wiper seal is moulded

into the cap and features an encased plastic 'cage' to provide resistant to grit, with Rotary nozzle having mutilple stream MPR sprayhaving Co-

206 moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle capable of Each 71.00 ₹ 1,474.00 ₹

covering 4.0-7.3m at 1.4 - 3.8 kg/cm2s pressure, and the enviroment. Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to

270 degree or full circle,True flushing mechanism,Thick streams and large water droplet & Low precipitation rate. Make: Rainbird/Toro/Weathermatics

Providing, installing, testing and commissioning of 1/2" x 12" Long Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene

having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet

conditions.The fittings shall be made of UV resistant thermo plastic with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket

Make:Lasco/Toro/Rainbird/Smarflows/Astore

Valves Providing of Various Valves with required

Fittings & Tapping PP Clamp Saddles with Chromed Nut Bolt & Nitrile Rubber Ring

208 Providing, installing, testing and commissioning of PVC Ball Valve 40mm Make: Astore/GF/FIL Nos 1.00 ₹ 995.00 ₹

209 Providing, installing, testing and commissioning of PVC Ball Valve 50mm Make: Astore/GF/FIL Nos 6.00 ₹ 1,156.00 ₹

210 Providing, installing, testing and commissioning of PVC Flush Valve 40mm Make: Rainbird/Smartflows/Netafim Nos 32.00 ₹ 269.00 ₹

211 Providing, installing, testing and commissioning of 3/4" Quick Couppling Valve Make: Rainbird/Toro/Smartflows Nos 22.00 ₹ 7,176.00 ₹

212 Providing, installing, testing and commissioning of 3/4" Quick Couppling Valve Key Make Rainbird/Toro/Smartflows Nos 4.00 ₹ 6,952.00 ₹

213 Providing, installing, testing and commissioning of Saddle Tee 63/50/4mmX3/4" witth ASTM Pipe (12" Long) Make Asore/Smartflows/Astral Nos 21.00 ₹ 785.00 ₹

214 Providing, installing, testing and commissioning of Swivel Elbow 3/4" X 3/4" - Rainbird/Toro/Smartflows Nos 4.00 ₹ 7,625.00 ₹

Providing, installing, testing and commissioning of 1" - 25mm Double Acting Air cum Vacum Release Valve, Body: Glass-reinforced Nylon, Float

215 Assembly: Polypropylene, Elastomers: EPDM, operating pressure minimum 0.1 kg/cm2, maximum 10 kg/cm2, Aerodynamic full-body kinetic shield, Nos 2.00 ₹ 2,186.00 ₹

Straight flow body with large diameter orifice size 0 787mm dia and area of 0 496 sqmm Make:Bermad/Rainbird/Crispin

216 Providing, installing, testing and commissioning of Saddle Tee 75/63/50mmX1" witth ASTM Pipe (12" Long) Make Asore/Smartflows/Astral Nos 2.00 ₹ 785.00 ₹

Providing, installing, testing and commissioning of 12" Rectangular Standard Commercial grade Valve Box with greenlid and corrugated structure

217 with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:14.5" L X 9.4" W 12.1" & bottom opening :18.7" L X 14.1"W Nos 6.00 ₹ 4,934.00 ₹

with Nut Bolt Lock Make: RainBird/Toro/Smarflows

Providing, installing, testing and commissioning of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and

bolt hole knockout & Having Dimensions @ Top Opening 8.9" Dia & Bottom Opening 11.9" Dia,with Nut Bolt Lock, Make: RainBird/Toro/Smarflows

Providing, installing, testing and commissioning of 6"Round box with greenlid Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8"

Dia, with Nut Bolt Lock, Make: RainBird/Toro/Smarflows

220 Providing, installing, testing and commissioning of 2.0" Electro megnatic flow sensor Make:Rainbird/Bermad/Smartflows/Cal-Valve Nos 1.00 ₹ 93,065.00 ₹

Providing Automation Items for Irrigation with all its required accessories.

Providing, installing, testing and commissioning of 2 Wire Irrigation Controller WIFI enbled with GSM router & SIM having 1 year data subscription

combines electromechanical and microelectronic circuitry capable of fully automatic or manual operation. Make:Netafim/Toro/Rainbird

Providing, installing, testing and commissioning of 1-1/2"-40mm Solenoid Valve - BSP Female Threaded, Pressure - 1 to 10 kg/cm2 Make:

Bermad/Netarim/RainBird/Toro

224 Providing, installing, testing and commissioning of Valve control module 2 wire Make: Bermad/Netarim/RainBird/Toro Nos 6.00 ₹ 9,347.00 ₹

225 Providing, installing, testing and commissioning of Rain Sensor Make: Bermad/Netarim/RainBird/Toro Nos 1.00 ₹ 5,400.00 ₹

Providing, installing, testing and commissioning of Direct Burrial Irrigation Automation Cable 14 x 2 Maxi , insulated with PVC . Conductor - Soft-

226 annealed, uncoated copper conforming to ASTM B-3 or B-8. Insulation: Polyvinyl Chloride conforming to UL Standard 1493 & CSA 22.2. Make: Mtr 460.00 ₹ 173.00 ₹

RainBird/Paige/Smartflows/Toro

Providing, installing, testing and commissioning of Pressure Regulatr to Maintain constant outlet pressure between 1.04 to 6.9 Kg/cm2 Make:

Bermad/Netarim/RainBird/Toro

Providing, installing, testing and commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant

,fits wire from 22ga to6 ga as per specifications complete. Make 3M/Smartflows/Rainbird

229 Providing, installing, testing and commissioning of Voltage Stabilizer Make: APC/V Guard/Lumineous Nos 1.00 ₹ 20,515.00 ₹

231 Filteration Unit

Providing, installing, testing and commissioning of Filter Station Fully Automatic Self Cleaing Filter, Pressure Differential Based, 100/130 Micron, Flanged

232 End & all required Accessories Nos 1.00 ₹ 257,475.00 ₹

Screen Filter Self Cleaning 20m3 / Hr Make : Rain Bird / Yardeney / Smartflows / VAF

233 Pump Station

Providing, installing and commissioning of Pumping System - Vurticle Multistage Pump having system flow of 10 m3/Hr @ 38 Mtr Head (1 Working + 1 SB)

with All Header, Pressure Tank, Pressure switch, NRV and Butter Fly Valve with VFD Control Panel with all GI C Class Pipes and Fittings

(Jindal/TATA/Surya) etc. complete as directed by engineer in charge Make : Grundfos / ITT / Smartflows / Watertronics

235 Providing, installing and commissioning of DWC SN 8 Pipe 3" - Road Sleeve Make : Supreme/Duraline/Astral/Smartflows Mtr 162.00 ₹ 836.00 ₹

MECHANICAL WORKS

DX SPLIT AC UNITS

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with fan motor,

hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its

accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and above of current year) with necessary core

236 (B) for 2 ton capacity Each 4.00 ₹ 79,932.00 ₹

Supplying & installing MS standard type stand mounting for outdoor unit of Split A.C. upto 4 TR capacity erected with necessary hardware materials as

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary PVC drain pipes for Split

AC machine up to 4 TR capacity

Supplying and installing MS angle , powder coated / Painted standard type of wall/floor stand mount for outdoor unit of split AC of following

239 capacity, erected with necessary hardware materials as directed. Each 4.00 ₹ 1,305.00 ₹

(A) 25mm*25mm*3mm thick M.S angle suitable for upto 2 TR. Capacity of ac machine

AIR DISTRIBUTION NETWORK

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting

complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness

complete as required.

SUPPLY INSTALLATION TESTING AND COMMSSIONING OF DIFFUSERS/ GRILLES AS PER FOLLOWING SCHEDULE

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers complete as per specifications and

size & shape as per site requirement and approved design.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as per

specifications and size & shape as per site requirement and approved design.

SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF DUCT DAMPERS

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws

linkages, flanges etc, as per specifications.

CIVIL SUPPORT STRUCTURE

245 MS Welded Structure (Supply and erection of M.S. angle stand with synthetic epoxy paint for all outdoor units) Kgs 35.00 ₹ 135.00 ₹

246 Core Cut up to 150mm Dia Each 4.00 ₹ 1,350.00 ₹

VENTILATION FAN

CABINET TYPE INLINE CENTRIFUGAL EXHAUST AIR FAN

Supply, Installation, testing & Commissioning of Cabinet type Centrifugal Fans / Inline Fan for Exhaust Air System complete with SISW Forward Curved

blower, fan assembly shall be AMCA certified (AMCA certification requird for Air Performance & Sound) & totally enclosed, fan-cooled, provided with

class F insulation, and of approved make.,

Fan shall be provided with TEFC Sq.cage, direct driven F' Class induction motor with minimum IP-55 protection

Motor shall be suitable for 220 ± 5% volts, Single phase, 50 cycles electric supply- I OR 415+/-10% V, 50 hz, 3 phase AC. The motor (Eff1 Class-Motor must

be VFD Compatible )

Max. noise level shall be 56 dBA at 1.5 meter in hemispherical reverberant room condition.

The complete fan assembly shall be CE Certified in accordance with EN-12101-3:2015 (Vendor shall submit the certifications for below listed fans)

The Fan units shall be designed as per the criteria mentioned in the specifications and selected so as to operate in the best efficiency zone; the units

shall be statically and dynamically balanced.

Necessary starter shall be in scope of HVAC Contract. Power cable will be available up to starter panel. The controller will be BMS compatible with all

required open protocol and requried licence softares.

WALL MOUNTED PROPELLER EXHAUST FAN WITH GRAVITY LOUVERS

Supply, Installation, testing & Commissioning of Propeller fan for wall or panel mounting suitable for supply or exhaust use having casing, protection

guard and impeller. Impeller shall be made with galvanized steel. Entire assembly shall be black enamel painted to avoid the rust. The fan should

have sickle blade impellers with external rotor motor, fan assembly shall be AMCA certified (AMCA certification requird for Air Performance & Sound)

& totally enclosed, fan-cooled, provided with class F insulation, and of approved make.,

Fan shall be provided with TEFC Sq.cage, direct driven B' Class induction motor with minimum IP-54 protection

Motor shall be suitable for 230 ± 5% volts, Single phase, 50 cycles electric supply- I. The motor (Eff1 Class-Motor must be VFD Compatible )

Max. noise level shall be 60 dBA at 3 meter in hemispherical reverberant room condition.

The complete fan assembly shall be CE Certified in accordance with EN-12101-3 (Vendor shall submit the certifications for below listed fans)

The Fan units shall be designed as per the criteria mentioned in the specifications and selected so as to operate in the best efficiency zone; the units

shall be statically and dynamically balanced.

Necessary starter shall be in scope of HVAC Contract. Power cable will be available up to starter panel.

ANNUAL MAINTENANCE CONTRACT

(Note : From Each RA Bill, 5% retaination money to be deduct during O&M Period)

Annual Maintenance Contract of HVAC System for DLP + Four Years

Comprehensive AMC for SITC of High Side units and Ventilation System

It includes all preventive maintanance , break down maintanance with all spares - repair or replacement of the defactive part or parts , this includes

all cosumable if any applicable.

252 1st year ( From the date of Completion of DLP ) Months 12.00 ₹ 26,375.10 ₹

253 2nd year ( From the date of Completion of DLP ) Months 12.00 ₹ 26,375.10 ₹

254 3rd year ( From the date of Completion of DLP ) Months 12.00 ₹ 26,375.10 ₹

255 4th year ( From the date of Completion of DLP ) Months 12.00 ₹ 26,375.10 ₹

Supply, installation, testing and commissioning of 3 phase 415V 4 wire Free Standing Floor mounted MV panel made out of minimum 14 SWG CRCA

sheet after seventank process and painting with Epoxy powder coating including all switchgear as per Tender SLD. The panel having PU/Neoprene

rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for

equipment/switchgear. The panel shall consist of suitable rating FP/TPN Aluminium- busbar-as per SLD (at the rating of 0.8ASq.mm) supported with

DMC/ SMC barriers and colour coded with Heat shrinkable sleeves. The Metering shall be provided as specified.The panel shall have Short circuit

with standing capacity as given in SLD and consist of the switchgear as mentioned below. The panel shall be mounted on plinth, stand, etc. including

all materials. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. All the Panels shall have minimum 25% outgoing as

per SLD. The earth bus shall be continuoulsy run without any jointing/welding and its Size should be per SLD. The size of all Panel Mounting Meters shall

be 96X96mm.The Panels shall be mounted on U channels including supply and fixing of the same. MCBs shall be provided for Control purposes. (All

Panels shall be extendable type only). Price shall be inclusive following:Shifting of panels from site store to the suitable location. Installation of panel as

located in electrical drawings or as per site conditions including removing packing etc Earthing all components frame etc to a common internal

All MCB’s shall be of minimum 10 KA breaking capacity.The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with

thermal magnetic releases upto 250 amps and miroprocesr R&B SOR based for 250 amps and above capacity, unless specified otherwise.All motor

feeders MCCBs shall be of motor duty.Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.Degree of

protection for following type of distribution panel enclosure shall be as per IS:13947-1993.IP 4x for all Indoor panel.

IP 65 and double door for all outdoor panel.All MCCB’s shall be provided with operating mechanism for door interlock.

All measuring instruments (Meters) shall be of digital electronic with LED of approved make.

All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.All panels shall have provision of the following:Pad locking of Switch

board doors.All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive (motor) load shall be of

type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic. All incoming and outgoing air circuit breakers shall be

placed on middle portion of the vertical in single tier formation SPD as shown in SLD

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter

256 connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The

rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

258 Sq.Mtr R0 ₹

(ii) with 550 mm. Depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor type double door cubical panel board necessary IP-

54 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size

259 of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

261 Sq.Mtr R0 ₹

(ii) with 550 mm. Depth

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be type tested as per

IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with

OC, SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault

protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt

262 Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Ea. 1.00 ₹ 141,527.00 ₹

Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with

LCD display, Rs 485 Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting,

Cable entry as per site situation,Cooling fans for panel

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

263 current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader Ea. 10.00 ₹ 6,112.00 ₹

tinned copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

264 current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned Ea. 1.00 ₹ 7,976.00 ₹

copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

265 current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned Ea. 4.00 ₹ 16,061.00 ₹

copper & complete erected in existing 16 G.M.S.housing.ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at 415 V . having

266 normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader Ea. 3.00 ₹ 20,739.00 ₹

tinned copper & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V having

267 Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader Ea. R0 ₹

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat. III

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to

be erected in existing box.confirming to IS 8828/1996 with ISI Mark Cat. III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

270 existing box having following capacity Ea. 12.00 ₹ 297.00 ₹

(A) 6 to 32 Amp.Cat. III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

271 existing box having following capacity Ea. R0 ₹

(B) 40 Amp Cat. III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

272 having following capacity Ea. R0 ₹

(a) 6 to 32 Amp.Cat. III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

273 having following capacity Ea. R0 ₹

(b)40 Amp.Cat. III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

274 having following capacity Ea. R0 ₹

(c)63 Amp.Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

275 having following capacity Ea. R0 ₹

(a) 6 to 32 Amp.Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

276 having following capacity Ea. 2.00 ₹ 662.00 ₹

(b)40 Amp.Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

277 having following capacity Ea. 17.00 ₹ 730.00 ₹

(c)63 Amp.Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(iii) 63 Amps. DP Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max. rating erected as directed.

(i) 25 Amps.FP Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max. rating erected as directed.

(ii) 40Amps. FP Cat. III

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max. rating erected as directed.

(iii) 63 Amps. FP Cat. III

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[c] 63 A, 2 pole Single Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[d] 6A to 25 A, 4 Pole Three Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[e] 32A to 40 A, 4 Pole Three Phase Cat. II

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.

[f] 63A, 4 pole Three Phase Cat. II

Providing and erecting following additional parts for panel mounting MCCBs

(A)Extended operating rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel mounting cat-III

Providing and erecting following additional parts for panel mounting MCCBs

(B)Extended operating rotary handle with pad lock with three position trip,off,on suitable for 400A to 630 A panel mounting cat-III

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, calibrated for 0 to

293 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with manufacturers calibration Ea. 1.00 ₹ 1,543.00 ₹

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following Voltage,

Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand

power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and displacement PF (signed, four

294 quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, Ea. 14.00 ₹ 13,984.00 ₹

V1, V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply

voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with

insulating materials connected to the meter

296 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with necessary connections. Ea. 16.00 ₹ 314.00 ₹

297 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections. Ea. 93.00 ₹ 43.00 ₹

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III

(C) 4 pole 440V 16 Amp

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp

301 Neutral Link for (i) 32 / 63 / 125 Amps Ea. 51.00 ₹ 136.00 ₹

303 Cable Terminal ( ‘Plain" Type)Set of Four for (i) 32 / 63 Amps Ea. 230.00 ₹ 383.00 ₹

304 Cable Terminal ( ‘Plain" Type)Set of Four for (ii) 125 / 200 Amps Ea. 13.00 ₹ 806.00 ₹

305 Cable Terminal ( ‘Plain" Type)Set of Four for (iii) 250 / 320 Amps Ea. 2.00 ₹ 1,323.00 ₹

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(c) One wire 2.50 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(g) One wire 16.00 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required.

(h) One wire 25.00 sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to

312 switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 1141.00 ₹ 8.00 ₹

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to

313 switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 74.00 ₹ 10.00 ₹

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to

314 switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 884.00 ₹ 12.00 ₹

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to

315 switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 332.00 ₹ 15.00 ₹

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current

316 carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with Rn.Mtr 4.00 ₹ 654.00 ₹

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current

317 carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with Rn.Mtr 4.00 ₹ 1,027.00 ₹

necessary connections.

(B) Suitable for 200 Amp. Capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current

318 carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with Rn.Mtr 8.00 ₹ 1,455.00 ₹

necessary connections.

(C) Suitable for 300 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following

319 current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with Rn.Mtr 4.00 ₹ 1,942.00 ₹

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following

320 current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with Rn.Mtr R0 ₹

necessary connections.

(B) Suitable for 200 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following

321 current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with Rn.Mtr R0 ₹

necessary connections.

(C) Suitable for 300 Amp. Capacity

322 Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Transformer, LT panel board, Motors etc. using copper clamp. Kg. R0 ₹

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using

324 Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 28.00 ₹ 787.00 ₹

325 DISTRIBUTION BOARD

SPN Distribution Board :

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

TPN Distribution Board :

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

329 be used) suitable for suitable for (PPI DB) Ea. 4.00 ₹ 2,885.00 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)(b) Sheet Steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

330 be used) suitable for suitable for (PPI DB) Ea. 3.00 ₹ 3,379.00 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)(b) Sheet Steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

331 be used) suitable for suitable for (PPI DB) Ea. RO ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)(b) Sheet Steel double door

VTPN Distribution Board :

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with

copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used)

(A)4 way outgoing

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with

copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used)

(B)6 way outgoing

MCB 's and its Accessories

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load having 10 KA breaking capacity & confirms to IS : 8828 in existing box

335 having following capacity Ea. 148.00 ₹ 297.00 ₹

(A) 6 to 32 Amp.( Cat.III)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

336 following capacity Ea. RO ₹

(a) 6 to 32 Amp. ( Cat.III)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

337 following capacity Ea. 8.00 ₹ 662.00 ₹

(b) 40 Amp. ( Cat.III)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

338 following capacity Ea. 4.00 ₹ 730.00 ₹

(c) 63 Amp. (cat III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

339 following capacity Ea. 7.00 ₹ 582.00 ₹

(a) 6 to 32 Amp. (Cat.III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

340 following capacity Ea. RO ₹

(b)40 Amp. . (Cat.III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in existing box having

341 following capacity Ea. RO ₹

©63 Amp. . (Cat.III)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP ( Cat. III)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP ( Cat. III)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(iii) 63Amps. DP ( Cat. III)

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

345 rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. Ea. RO ₹

[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

346 rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. Ea. 157.00 ₹ 1,925.00 ₹

[b] 32A / 40A, 2 pole Single Phase

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

347 rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. Ea. RO ₹

[e] 32A to 40 A, 4 Pole Three Phase

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short circuit

breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for

348 rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. Ea. RO ₹

[f] 63A, 4 pole Three Phase

349 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Ea. 2.00 ₹ 175.00 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

350 be used) suitable for Ea. RO ₹

(b) sheet steel double door (IP-43)

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

354 SITC of IP-43 sheet steel metal enclosure for 63-200A MCCB. Ea. RO ₹

355 SITC of IP 65 - outdoor type 4-way spn db Ea. RO ₹

356 SITC of IP 65 - outdoor type enclosure for 63-200A MCCB. Ea. RO ₹

Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Bottom of the MCB Distribution Box for

housing/covering Extra wires & Cables, suitable for following size of MCB DB Box Single Phase 4 Way

Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Bottom of the MCB Distribution Box for

housing/covering Extra wires & Cables, suitable for following size of MCB DB Box Three Phase 4 Way

359 Half / One Module Blanking Plate of Standard Size. Ea. 182.00 ₹ 9.00 ₹

360 CABLE TRENCH

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making

the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand

above & below cable (16 bricks per meter)

363 LT CABLES & CABLE TERMINATION

364 LT CABLE UNARMOURED COPPER CABLES.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(E) 3 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(F) 3 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(G) 3 core 6 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(H) 3 core 10 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(J) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(K) 4 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(L) 4 core 6 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(M) 4 core 10 Sq. mm

LT CABLE ARMOURED ALUMINIUM CABLES

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

373 in existing trench / pipe of following size of cables Mtr. RO ₹

(A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

374 clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

375 clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

376 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(B) 3 1/2 core 35 Sq. mm ( 16 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

377 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

378 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. 25.00 ₹ 375.00 ₹

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

379 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. 140.00 ₹ 486.00 ₹

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

380 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. 70.00 ₹ 535.00 ₹

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

381 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

382 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

383 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. 60.00 ₹ 1,157.00 ₹

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

384 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(J) 3 1/2 core 300 Sq. mm( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor with water swellable coating which should protect

385 against saline water & for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Mtr. RO ₹

(K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

LT CABLE ARMOURED COPPER CABLES

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

386 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. RO ₹

(A) 3 core 2.5Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

387 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable Mtr. 1485.00 ₹ 285.00 ₹

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

388 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 345.00 ₹ 392.00 ₹

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

389 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 26100.00 ₹ 495.00 ₹

(C) 3 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

390 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 1360.00 ₹ 720.00 ₹

(E) 3 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

391 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable.. Mtr. RO ₹

(A) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

392 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 1920.00 ₹ 361.00 ₹

(B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

393 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 100.00 ₹ 505.00 ₹

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

394 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 240.00 ₹ 670.00 ₹

(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating which should protect

395 against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. Mtr. 940.00 ₹ 978.00 ₹

(B) 4 core 16 Sq. mm

LT CABLE GLANDS

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails,

396 insulating tape etc for following size of cables. Ea. 30.00 ₹ 33.00 ₹

(A) 2 to 4 core 2.5/4 Sq.mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails,

397 insulating tape etc for following size of cables. Ea. 22.00 ₹ 38.00 ₹

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails,

398 insulating tape etc for following size of cables. Ea. 560.00 ₹ 38.00 ₹

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails,

399 insulating tape etc for following size of cables. Ea. 70.00 ₹ 47.00 ₹

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

400 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

401 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

402 complete with out going tails, insulating tape etc for following size of cables. Ea. 4.00 ₹ 102.00 ₹

(C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

403 complete with out going tails, insulating tape etc for following size of cables. Ea. 4.00 ₹ 130.00 ₹

(D) 3 & 1/2 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

404 complete with out going tails, insulating tape etc for following size of cables. Ea. 4.00 ₹ 139.00 ₹

(E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

405 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(F) 3 & 1/2 core 150 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

406 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(G) 3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

407 complete with out going tails, insulating tape etc for following size of cables. Ea. 4.00 ₹ 245.00 ₹

(H) 3 & 1/2 core 240 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

408 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(I) 3 & 1/2 core 300 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable

409 complete with out going tails, insulating tape etc for following size of cables. Ea. RO ₹

(J) 3 & 1/2 core 400 Sq. mm

LT CABLE ALUMINIUM LUGS

Supply, installation, testing and commissioning of Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

410 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. RO ₹

Supply, installation, testing and commissioning of Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

411 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. RO ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

412 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 16.00 ₹ 20.00 ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

413 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 28.00 ₹ 25.00 ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

414 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 22.00 ₹ 40.00 ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

415 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 28.00 ₹ 45.00 ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

416 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. RO ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

417 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. RO ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

418 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 22.00 ₹ 85.00 ₹

Supply, installation, testing and commissioning of Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

419 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. RO ₹

LT CABLE COPPER LUGS

Supply, installation, testing and commissioning of Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

420 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 200.00 ₹ 8.00 ₹

Supply, installation, testing and commissioning of Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

421 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 3860.00 ₹ 10.00 ₹

Supply, installation, testing and commissioning of Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

422 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 516.00 ₹ 12.00 ₹

Perforated type cable tray

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate /

424 Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of Rmt. RO ₹

engineer in charge.

(3) 150 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate /

425 Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of Rmt. RO ₹

engineer in charge.

(5) 300 X 50 X 2.0 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate /

426 Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of Rmt. 20.00 ₹ 794.00 ₹

engineer in charge.

(6) 450 X 50 X 2.0 mm Thick

Ladder type cable tray

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray should be bended as per IS 2062/1079 shall be

fabricated of double bended channel section longitudinal members with single bended Channel section. Rungs of members welded to the base of

the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate /

Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in

(8) 150 X 100 X 1.6 mm Thick

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray should be bended as per IS 2062/1079 shall be

fabricated of double bended channel section longitudinal members with single bended Channel section. Rungs of members welded to the base of

the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate /

Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in

(10) 300 X 100 X 2.0 mm Thick

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray should be bended as per IS 2062/1079 shall be

fabricated of double bended channel section longitudinal members with single bended Channel section. Rungs of members welded to the base of

the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate /

Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in

(12) 500 X 100 X 2.0 mm Thick

Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions

430 of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor Kg. RO ₹

431 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

432 following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules Pt. 555.00 ₹ 481.00 ₹

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat lll)

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary

light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

435 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. 240.00 ₹ 505.00 ₹

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

436 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. RO ₹

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

Point wiring for Individual Plug with & earth wire of 2.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

437 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. 255.00 ₹ 863.00 ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC/ Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC /

439 Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per Pt. 4.00 ₹ 598.00 ₹

pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat III)

440 Providing & erecting insulated socket 3P+N+E with Plug16A rating which is comprised of Four pole MCB slot and insulated socket IP40 Cat-III. Ea. 1.00 ₹ 1,690.00 ₹

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure

441 erected as directed with connection. Ea. 1.00 ₹ 522.00 ₹

[A] Metal Clad Socket with metal clad top Cat.III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

442 continuity of following size Mtr. 2553.00 ₹ 62.00 ₹

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

443 continuity of following size Mtr. RO ₹

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(c) 2 wire 10 sq. mm (use earth wire of 4 sq.mm )

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(g) 4 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

449 (A) with medium class Rigid PVC pipe and accessories Mtr. RO ₹

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary

connections as directed

450 1 no. 6A/16A universal plug-switch combined. Pt. 19.00 ₹ 1,122.00 ₹

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type accessories Cat. III

SITC of following type of Modular Type accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured /

451 metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. Ea. 5.00 ₹ 395.00 ₹

(5) Electronic hum Free four or more steps EME Fan regulator (cat III)

SITC of following type of Modular Type accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured /

452 metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. Ea. 10.00 ₹ 25.00 ₹

(7) Blank Plate Single (cat III)

Providing & erecting stand alone ceiling mount PIR motion Sensor with ABS Housing single phase AC operation. Complete with Dual element

pyroelectric sensor, Digital Signal Processing Detection Range 14 feet at 10 feet height, angle 360 degree, RFI and EMI immunity, Detects motion in it's

coverage area. Multipurpose device can be used as security device, an energy saving device, an automatic switch. Complete with infra red sensor,

Light & sensitivity Sensor, Timer with Bye pass facility. Suitable for 400 watts electrical load

454 INDOOR LIGHT FIXURE

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

456 Luminaire efficacy> 85 lumens/watt , Ea. 700.00 ₹ 584.00 ₹

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt Lighting Fitting with electronic driver. And lumen output from

458 luminaire 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to +60degC working temperature, AL frame Ea. 6.00 ₹ 780.00 ₹

with Beam Angle 120deg

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

6watt Outdoor Tree Up lighter IP

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

12watt Outdoor Tree Up lighter IP

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished

powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt and above

,surge-4kv cat-III

(Color of bollard shall be as per architeture intent)

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP65

18 watts, Surge-2 KV, Surge-2 KV Cat-lll

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

9w LED Floor Light IP66

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

464 Luminaire efficacy> 85 lumens/watt , Ea. 21.00 ₹ 4,915.00 ₹

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

Light having Aluminium die cast IP-65

12 watts, Direct/Indirect luminaire

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

8-12 watt Step Light ip-65

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

LED Strip Light 12W per meter,(2 wire) including aluminium profile with non integral suitable Driver complete.IP65

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

18W Under water light IP68 (for Fountain)

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

200W Multiunit decorative light (mounted on 9mtr Pole , Pole excluded)

Supplying and erecting LED Outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

24W hanging lanterns IP65

470 Type -A ( with Basic Rate of Rs.1000/-) up to Rs. 1500 Ea. 10.00 ₹ 800.00 ₹

471 Type -B ( with Basic Rate of Rs.2000/-) Rs. 1501 to Rs. 2500 Ea. 25.00 ₹ 1,800.00 ₹

472 Type – C ( with Basic Rate of Rs.3000/-) Rs. 2501 to Rs. 3500 Ea. 50.00 ₹ 3,000.00 ₹

473 Type – D ( with Basic Rate of Rs.4000/-) Rs. 3501 to Rs. 5000 Ea. 30.00 ₹ 4,200.00 ₹

474 Type – E ( with Basic Rate of Rs.5000/-) Rs. 5001 to Rs. 10500 Ea. R0 ₹

475 Type – F ( with Basic Rate of Rs.10000/-) Rs. 10501 to Rs.15000 Ea. R0 ₹

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable

for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete

as required.[ Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

477 Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. Ea. 2.00 ₹ 1,353.00 ₹

250mm with 1350 RPM Cat.II

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

[B] 380 mm dia 900 RPM Cat.II

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM

[E] 450 mm dia 1400 RPM

480 EXTERNAL LIGHT FIXTURE

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

481 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge Ea. 99.00 ₹ 4,772.00 ₹

may select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(i) above 36 to 48 watts Cat-iii

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(iii) Above 60 to 90 watts Cat-iii

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts Cat-iii

485 EXTERNAL LIGHTING POLE

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside surface finish and should be totally fre from corrosion as well as non

conductive and shock proof. Pole should be provided with FRP/GRP base bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint.Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695) 200+/‐50MPa,

7. Yeild Strength(ASTM D638) 250 +/‐50MPa.Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented. Pole

should be painted with first coat of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional data,performance criteria and some interchagebility features of poles as per the

standard ANSI C123.20 latest version of ASTM D 923/01 including cable termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per the manufacturer details and site requirement .

(1) 'A' class frp/grp pole suitable for base plate mounting

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside surface finish and should be totally fre from corrosion as well as non

conductive and shock proof. Pole should be provided with FRP/GRP base bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint.Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695) 200+/‐50MPa,

7. Yeild Strength(ASTM D638) 250 +/‐50MPa.Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented. Pole

should be painted with first coat of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional data,performance criteria and some interchagebility features of poles as per the

standard ANSI C123.20 latest version of ASTM D 923/01 including cable termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per the manufacturer details and site requirement .

(1) 'A' class frp/grp pole suitable for base plate mounting

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside surface finish and should be totally fre from corrosion as well as non

conductive and shock proof. Pole should be provided with FRP/GRP base bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint.Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695) 200+/‐50MPa,

7. Yeild Strength(ASTM D638) 250 +/‐50MPa.Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented. Pole

should be painted with first coat of epoxy primer and then two coat of highly weather resistance polyurethen paint to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional data,performance criteria and some interchagebility features of poles as per the

standard ANSI C123.20 latest version of ASTM D 923/01 including cable termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per the manufacturer details and site requirement .

(1) 'A' class frp/grp pole suitable for base plate mounting

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with suitable brass studs with nuts, washers and clamps of size 25mm x

3mm suitable for pole painted with one coat of red lead paint.

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat suitable for fixing 2 Nos.of armoured cable with nuts and bolts.

(C) for 165 / 195 mm dia. Pole

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

491 ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. Ea. 93.00 ₹ 801.00 ₹

( for 4 & 6 mtr pole)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cm. Deep in below

492 ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. Ea. 6.00 ₹ 801.00 ₹

( for 7.5 & 8/8.5 mtr pole)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

493 ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. Ea. 2.00 ₹ 801.00 ₹

( for 9 & 10 mtr pole)

Providing & erecting approved make street light / wall mounting junction box compression moulded from SMC (thermoset plastic) vertical sliding

cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp

or bolt nut & earth bolt of following size

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts and bolts along the pole /

495 wall shaping the pipe as per site requirement. Pipe dia as following. Mtr. 93.00 ₹ 323.00 ₹

Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket

Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm thk,1000mm long from pole centre

(B) Double arm bracket

499 SITC of required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. Kg. 1000.00 ₹ 77.00 ₹

500 SITC of required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 526.00 ₹ 787.00 ₹

501 SITC of Annealed bare Copper wire 8 to 16 SWG. Kg. 5.00 ₹ 787.00 ₹

502 SITC of HOT deep Galvanised iron strip wire 8 to 16 SWG. Kg. 62.00 ₹ 77.00 ₹

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of

503 earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter Ea. 21.00 ₹ 8,551.00 ₹

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)

i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz

505 Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC Ea. 1.00 ₹ 393,391.00 ₹

sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load.

(J) 20 KVA 3 - phase with 1Hr Backup

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz

506 Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC Ea. 1.00 ₹ 128,815.00 ₹

sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load.

(D) 5 KVA with 1Hr Backup

507 DWC, HUME, PVC PIPES

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting

508 accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. Mtr. 5155.00 ₹ 62.00 ₹

(A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting

509 accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. Mtr. RO ₹

(B)63mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting

510 accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. Mtr. RO ₹

(C)90 mm outer dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting

511 accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. Mtr. RO ₹

(D)120 mm outer dia

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an

512 approved manner and making the ground as per original Mtr. RO ₹

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an

513 approved manner and making the ground as per original Mtr. RO ₹

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an

514 approved manner and making the ground as per original. Mtr. 1162.00 ₹ 261.00 ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary

515 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 575.00 ₹ 33.00 ₹

Providing and erecting ISI mark Heavy class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary

516 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 9775.00 ₹ 70.00 ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary

517 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 575.00 ₹ 54.00 ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary

518 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 3825.00 ₹ 67.00 ₹

519 JUNCTION BOXES

Supply, Transportation, Installation, testing and commissioning of IP-67 Rated weather proof Outdoor type junction boxes having dimensdios Height x

Width x Depth:- 104 x 104 x 70 mm with terminal having black colour RAL 7035. with 5 pole terminal set upto 4 sqmm cables

Supply, Transportation, Installation, testing and commissioning of IP 66/69 weather proof Outdoor type junction boxeshaving dimensdios Height x Width

x Depth:- 155 x 210 x 92 mm with terminal having black colour RAL 9011. with 5 pole terminal set upto 16 sqmm cables

522 SAFETY ITEMS

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE installation to

be erected as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH VOLTAGE installation to be

erected as per IS.-2551.

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from

Electric shock with minimum 50" diagonally size.

526 Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Ea. 2.00 ₹ 212.00 ₹

Supplying rubber matting of following thickness as per IS:15652/IEC

Supplying rubber matting of following thickness as per IS:15652/IEC

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use

529 bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard Ea. 2.00 ₹ 297.00 ₹

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and

Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of

531 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of Ea. 1.00 ₹ 933.00 ₹

approved enamelled silver paint

532 Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms. Ea. 2.00 ₹ 60.00 ₹

Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and

brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall

[A] For 5 Kg Capacity

Supply and installtion of expanding firestop foam equivalent to Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in

accordance with UL 1479/ASTM-E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines like

cable trays or cables/cable bundles. The expanding foam expands seven times its volume to fill the cavity at the time of dispensing the material and

shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water

tightness when tested for W rating as per UL standards and shall carry test certificate for sound insualtion of 50 db when tested in accordance with

ASTM E 90. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of

approx. 1.3 g/l as per LEED 2009. The product shall be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test

for Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed & classified. The system shall be UL & FM approved.

Supply and installation of Fire stop mortar system equivalent to Hilti CP 636 , with minimum 2 hours fire rating when tested in accordance with UL

1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. The mortar

shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per

535 Sq.Mtr RO ₹

Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The

product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96. The product shall be age tested as per Dafstb and

DIBT standards.The system shall be UL listed. The gaps around inaccessible or complicated openings shall be sealed with exapnding firestop foam.

Supply and installtion of high performance intumescent firestop sealant around combustible penetrations like plastic pipes or ducts/pipes with

insulation passing through floor to provide minimum 2 hours fire rating when subject to test standards of UL 1479/ASTM-E 814. The sealant shall have

surface burning characteristics according UL 723 (ASTM E84-96): Flame spread index 0 and smoke development index 5. The sound transmission

classification according to ASTM E 90-99 shall be 56 (STC Rating). Sealant shall have mold and mildew resistance and the performance shall be Class

536 according to ASTM G-21. Movement capability approx.. 5% (ISO 11600) and the average volume shrinkage is 24% according ASTM C1241. Sealnt shall Ea. RO ₹

meet LEED requirements for indoor environmental quality credit (4.1 and 4.2) with a VOC content of 9 g/l. Seismic tested on mechanical performance,

smoke and fire-ratings. The product shall be age tested as per Dafstb and DIBT standards.The system shall be UL listed & classified and product shall

bear the UL and FM approval logo on the packing. If none of UL test certificate comply with actual application, an EJ document (as per IFC

Guidelines) prepared by a qualified personnel and based on nearest third party tested & approved systems like UL test certificates & in accordance

with IFC guidelines shall be producted by manufacturer A firestop submittal shall be produced by manufacturer in accordance with approved

Supply and installtion of ablative coating Hilti CP 679A+ on cable/ bunched cables in enclosed and semi-enclosed cable runs to be coated at least

mtr in every 14 mtrs of cable runs for the horizontal runs and to entire length of the vertical run as per IEC 60332 part.3 tested by DNV . The coating

shall have a density of 1.41 gm/ cm3. The product shall be FM approved to class 3971.Manufacturer should submitt relevant certificates for mentioned

537 attributes. Coating shall be carried out by approved machine spraying system which will yield uniform thickness & better finish. Firestop installation shall Sq.Mtr RO ₹

be done by Hilti Accredited Firestop Speciality Contractor (HAFSC) and in accordance with Hilti guidelines . Firestop Speciality Contractor needs to

submitt work completition certificate along with installation report through Hilti documentation Software FIELDWIRE for periodic inspection &

maintenance purpose.

Liasoning with Supply Ele.Co,Chief Electrical Inspector & other competant authority to getting requried licences & approvals.

Filling the necessary application to supply co. following up and getting the supply filling the necessary test report to the supply co. inclusive. All official

fees including security deposits will be paid by the client and out of pocket expenses shall be of contractor.

1. To get temporary power supply

538 2. To get the H.T. Connection Job 1.00 ₹ 45,000.00 ₹

3. To get the L.T. Connection

4. To get all approval from CEIG and supply company

5. To get Electrical Inspector NOC

6. To get Lift Licence

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Ageing Test &

540 Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 Ea. 10.00 ₹ 9,323.00 ₹

protocol with MAST 34mm dia 3000 mm long- Cold Galvanized

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party

laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross

splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to connect

conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current

withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for lightning protection (Vertical Riser/Down

Conductor which shall be concealed in Column) to meet the requirement of IS IEC 62305 With Accessories - Earthing stud of dimension SS-75mm OD

plate with 10mm dia tail connector used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For Interconnecting the

Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight

542 Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with Mtr. 92.00 ₹ 721.00 ₹

reinforcement inside the concrete for structural earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing point. All

Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test)

conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC

SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron

coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding.

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based

544 environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust Per Set 5.00 ₹ 5,933.00 ₹

proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

545 SITC of Test Joint for 10mm Dia ms round conductor to 25x6 mm earthing strip. Ea. 10.00 ₹ 3,115.00 ₹

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

547 tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting Ea. 1.00 ₹ 735,254.00 ₹

equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with

excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/ 5% of rated voltage from no load to full load Both the engine and alternator fitted on a common fabricated steel

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity armoured cable and

complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick

conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with

3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of minimum

hrs of continous running capacity on full load . Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up

to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate

from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR

(Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring

harness connected to ECU .)

(K) Continuous rating of 82.5 KVA ,BHP not less than 102 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete

of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button.

frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(B) AMF Control Panel for75 KVA/82.5 KVA3 phase DG Set

550 DATA NETWORKING INFRASTRUCTURE

SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 23AWG Solid: Per Meter

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Face Plate - Dual (Keystone Jack,square)

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Jack Cat 6 Keystone UTP

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports

Advanced L2 switching and security features

561 L2+ Static Routing Ea. 1.00 ₹ 18,218.00 ₹

Optional “standard mode” or “surveillance mode” management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 24 x 10/100/1000BASE-T ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

562 L2+ Static Routing Ea. 10.00 ₹ 15,247.00 ₹

Optional “standard mode” or “surveillance mode” management user interface

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

563 L2+ Static Routing Ea. 13.00 ₹ 31,680.00 ₹

Optional “standard mode” or “surveillance mode” management user interface

193 W PoE budget

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Maximum distance of up to 10 km

Single-mode fiber

1000BASE-LX (IEEE 802.3z standard)

Duplex LC connector

MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 32U Rack Frame/800x1000/Steel/ CKD/Casters Type 2/Black,Levellers,19" Adopter kit /32U/Loops/Black,Perforated

Door/32/800/Flat/Black,Perforated Door/32/800/Dual/Black,Side Panels/1000/32U/Vented/Black,Swing handle / Mechanical Lock / Single Point /

Common Key/Polymade,Swing handle / Mechanical Lock / Three Point / Common Key/Polymade,Horz. Cable Organiser/1U/ Channel On Front,Horz.

565 Cable Organiser/1U/ Channel On Front,Shelf/1000/Black,Shelf/Key Board/19"Rty/1000/Black,Shelf/Key Board/19"Rty/1000/Black,ITE / Server Rack Air Ea. 1.00 ₹ 73,990.00 ₹

Circulation module/Tower Mount/360CFM,ITE / Server Rack Air Circulation module/Tower Mount/360CFM,Server /IT Rack mount power distribution unit,

1Ph, 230V, 32A, 50/60Hz, Zero U standard with 10 X Indian Round Pin 5/15A, 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black/ Inlet Plug

SITC of 15U/600 Rack/Welded/WM/Off White,15U/600 Rack/Welded/WM/Off White,Server /IT Rack mount power distribution unit, 1Ph, 230V, 16A,

566 50/60Hz, 2U standard with 6 X Indian Round Pin 5/15A, Inlet Plug type 16A Indian Round Pin, 16A MCB - PDU Rating 3.6KVA/Side feed-1.5Mt/ Black,Horz. Ea. 5.00 ₹ 19,852.00 ₹

Cable Organiser/1U/Loop,Cantilever Shelf/Type2/1U/Off White,Mounting Hardware-CR (Pack of 20),ITE / Server Rack Air Circulation module/90CFM

SITC of 6U/600 Rack/WMOD/Metal Door/ IP56/Off White,Pole Mounting Bracket,Server /IT Rack mount power distribution unit, 1Ph, 230V, 16A, 50/60Hz,

2U standard with 6 X Indian Round Pin 5/15A, Inlet Plug type 16A Indian Round Pin, 16A MCB - PDU Rating 3.6KVA/Side feed-1.5Mt/ Black,Horz. Cable

Organiser/1U/Loop,Horz. Cable Organiser/1U/Loop,Cantilever Shelf/Type2/1U/Off White,Mounting Hardware-CR (Pack of 10),ITE / Server Rack Air

Circulation module/90CFM,Filter Unit/Double louvered Module/IP56/Off White,Universal Rack Ground Kit-Type

568 SITC of RJ 45 Connectors Ea. 100.00 ₹ 37.00 ₹

569 SITC of 50mm Flexible Pipe with required accessories Mtr. 200.00 ₹ 118.00 ₹

570 SITC of Wheather Proof Back box for CCTV Ea. 72.00 ₹ 290.00 ₹

571 SITC of 100X50 mm trunking Casing caping Mtr. 12.00 ₹ 633.00 ₹

572 SITC of 4-6 Mtr CCTV Pole Ea. 11.00 ₹ 25,266.00 ₹

SITC of 2X2 Dual Band PoE Multi-Gig Insight Managed Wi-Fi 6 Access Point, Management: stand alone or cloud controller, seamless roaming, fast

573 roming, Beam forming, Mesh networking, security :WPA3, wall\ceiling mount(Kit included), Total users supported: 250, Concurrent Users:60 with 5 years Ea. 5.00 ₹ 43,401.00 ₹

cloud base subscriptions licenses

SITC of 2X2 Dual Band PoE Multi-Gig Insight Managed Wi-Fi 6 Outdoor Access Point, Management: stand alone or cloud controller, seamless roaming,

574 fast roming, Beam forming, Mesh networking, security :WPA3, wall\pole mount(Kit included)Total users supported: 250, Concurrent Users:50 with 5 years Ea. 8.00 ₹ 51,883.00 ₹

cloud base subscriptions licenses

575 VOICE COMMUNICATION SYSTEM

Providing and erecting add on Digital PRI T1E1 single card suitable for existing system of following ports suitable for 30 channel [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Providing and erecting IP Phone with display with all IP system supported [[Approved by Competent Authority i.e. not Below the rank of Executive

Providing and erecting Small EPABX System with In Built 4 Port Voice Mail [[Approved by Competent Authority i.e. not Below the rank of Executive

[D] No. Extension - 48 , No. of Junction -8 , No. of expandable ports -125 , Operators Console -01 Compatible - ISDN

579 Providing and erecting IP Card license with inbult 16 channel and support up to 64 channel Ea. 1.00 ₹ 47,614.00 ₹

580 Providing and erecting IP user license for 150 user Ea. 1.00 ₹ 102,864.00 ₹

581 CCTV SURVEILLANCE SYSTEM

SITC of H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm, 30M IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × 1440, 0.01 Lux,

582 F1.2, AGC ON; Defog, True day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Basic intelligent video analytics, NDAA Ea. 18.00 ₹ 15,340.00 ₹

Compliance, UL, CE, FCC Certified

SITC of H.265 4MP IR Bullet N/W Camera, 3.6mm, 50M, Micro SD, DC12V/PoE, IP67,IK10, Basic IVA, 4MP resolution (2560 × 1440), 0.01 Lux,F1.2,AGC

583 ON,True day / night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Basic intelligent video analytics, NDAA Compliance, UL, CE, Ea. 54.00 ₹ 15,340.00 ₹

SITC of 64 Channel NVR - 64 Channel Embedded NVR, 8 SATA Upto 144TB, H.265 / H.264 / MJPEG video compression, RAID 5, 0TB, 512Mbps / 512Mbps

(Incoming / Outgoing), HDMI 2.0 X 1 (Main), Single Stream, Main or Sub Stream, 2 X RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface, SATA

interfaces : 8 SATA @ 18TB each supported, RAID Arrays : RAID 0 / 1 / 5 / 10 supported, Protocol Support : TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, SMTP,

584 FTP, UPnP, DDNS, RTP, IPV4, DNS, RTCP, ICMP, HTTP, QoS, ARP, NVR Operating System : Linux, Network Interfaces : 2 X RJ-45 10/100/1000 Mbps self- Ea. 2.00 ₹ 252,647.00 ₹

adaptive Ethernet interface, USB interface : Total 3 USB ports: 2x USB 2.0 and 1x USB 3.0, ONVIF : ONVIF Profile S, Alarm I/O : 2IN / 1OUT, Alarm Mode :

Manual, Sensor, Motion, Exception, Smart Events, etc., Alarm Action : Record, Snapshot, Call Preset, E-mail, Buzzer, Certification : CE, FCC, BIS, NDAA

Compliant. iOS and Android mobile app support

585 SITC of 10 TB Surveillance Grade HDD for 2MP Recording, 25 FPS at 2 Mbps Bit Rate Ea. 6.00 ₹ 37,898.00 ₹

SITC of Intel Core i7-12700 12C Processor 25M Cache, up to 4.90 GHz / 16GB DDR5 / 512 SSD / Win 10 Pro Operating System / No Monitor / DVD RW /

PS 1000W / NVIDIA GeForce RTXT 3070 8 GB GDDR6 Workstation Graphics Card including 3 DP - HDMI

SITC of 55 inch, Professional LED Display Cum Commercial TV with Android 11 & Inbuilt play store, UHD resolution, 400 nits brightness, It's 24*7 usage,

587 50,000 hours life, 3 years warranty, Android 11 with inbuilt play store, Inbuilt wifi. Landscape / Portrait mode, Inbuilt Bluetooth, 2 GB / 16 GB Memory, Ea. 1.00 ₹ 74,893.00 ₹

Inbuilt SOC Coaxial/optical-out*1, Android 9, 2GB/16GB

588 PUBLIC ADDRESS SYSTEM

SITC of Controller Public address and emergency sound system control unit

Control and routing of 4 simultaneous audio channels

One controller supports 12 zones, expandable up-to 492 zones with 24-zone routers

Four controllers can be networked using OMNEO interface module

EN 54-16 and ISO 7240-16 system certification

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Power amplifier, 2x500W 2 ✕ 500 W class-D power amplifier (70/100 V output)

Low power consumption in standby mode

590 Excellent sound quality, high signal-to-noise ratio Ea. 2.00 ₹ 217,686.00 ₹

EN 54-16 and ISO 7240-16 system certification

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Call station Call station with soft touch button for PAVIRO system

15 freely programmable buttons

Customization via built-in display and keys

Provision for installing emergency button and key switch

EN 54-16 and ISO 7240-16 system certification

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer

SITC of Ceiling loudspeaker 6W, ABS with clamps

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Horn loudspeaker 30W, circular, ABS

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Cabinet loudspeaker, 30W, black

High-fidelity music and speech reproduction

Selectable 8 ohm, 70 V and 100 V inputs

594 Compact yet robust ABS enclosure Ea. 8.00 ₹ 13,267.00 ₹

Supplied with adjustable mounting bracket

Complies with international installation and safety regulations [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

595 Supply, Laying and Fixing of 2 Core X 1.5 Sq.mm FRLS Multistrand PVC insulated Copper cable with all required accessories. Mtr. 1500.00 ₹ 164.00 ₹

596 ANNUAL MAINTENANCE CONTRACT

1 Comprehensive AMC for SITC of Electrical & ELV Equipment

Provide annual maintenance service (including supply of material) after handing over of work for electrical and ELV works as per schedule including

necessary materials to be given under warantee free of cost, etc.

597 1st Year ( From the date of Completion of DLP ) Year 1.00 ₹ 989,689.25 ₹

598 2nd Year ( From the date of Completion of DLP ) Year 1.00 ₹ 989,689.25 ₹

599 3rd Year ( From the date of Completion of DLP ) Year 1.00 ₹ 989,689.25 ₹

600 4th Year ( From the date of Completion of DLP ) Year 1.00 ₹ 989,689.25 ₹

602 4/5/6 Passengers, Ground plus 2 upper floors with Rated Speed of 1.0 m/sec.

603 (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat. Ea. 1.00 ₹ 1,223,056.00 ₹

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/ Stretcher lifts having AC2/ACVV/ACVF drives & automatic

doors only. The system comprising following features & facilities.

(i) Announcing floor message, message to close period.(ii) Announcing ‘Emergency Message’ when lift is stuck between floors due to power failure or

any other reason.

(iii) Instrumental Music between floor announcing.(iv) Announcement in English / Hindi & Gujarati Languages..

(v) Flexible to accommodate special per-programmed message such as name of the building /office.(vi)Volume adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift with making use of sound isolated

floating platform & micro switches on SI frame to get sensation of live load inside lift cage at any given moment, with provides new fixtures of

605 overload warning inside lift cage with new relay in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional Ea. 1.00 ₹ 32,205.00 ₹

wiring including laying of new travelling cable, include minor civil work & without changing the existing capacity speed stops, travel & operation of

the desired lift

606 ANNUAL MAINTENANCE CONTRACT

607 Comprehensive AMC for SITC of Lift Equipment

Provide annual maintenance service (including supply of material) after handing over of work for Lift works as per schedule including necessary

materials to be given under warantee free of cost, etc.

609 1st Year ( From the date of Completion of DLP ) Year 1.00 ₹ 44,527.39 ₹

610 2nd Year ( From the date of Completion of DLP ) Year 1.00 ₹ 44,527.39 ₹

611 3rd Year ( From the date of Completion of DLP ) Year 1.00 ₹ 50,888.44 ₹

612 4th Year ( From the date of Completion of DLP ) Year 1.00 ₹ 57,249.50 ₹

SANITARY FIXTURES AND FITTINGS

SPECIAL NEED FOR DISABLED TOILET

Providing and Fixing EWC wall hung, Wash basin, Grab bar, Hinged rail & special faucet with spachula including seat cover, and flush valve, fittings,

nuts, bolts and gasket etc complete for disabled toilet of approved make and conforming to IS Standards. Wash basin with one pair mounting

brackets, Waste coupling 32 mm size full thread with 80 mm heightJaquar make with 7 years warranty: Chrome plated, Bottle trap Jaquar make with

years warranty: Chrome plated etc., EWC S Trap & Cistern complete with fittings & seat cover, one no. hinged rail 750 mm & Two nos of grab rails

mm ,etc. complete as per directed by the Engineer's Representative.

613 EWC : Jaquar : DIS-WHT-93955P180UF Set. 2.00 ₹ 69,000.00 ₹

Wash Basin : Cera : S2040166

Cat. No. F9030453 Single lever clinical faucet

Cat. No. B2210106 Wall mounted Grab Bar 600 mm Long

Cat. No. B2210108 wall mounted Hinged Hand Rail 750 x

Make : Cera- Cruset Set

Providing and fixing wash down wall mounting EWC-P of approved shade, conforming to Pattern 2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe

and plug bend as per specifications; glazed vitreous / Coloured European Water Closet with Metropole flush valve, connecting PVC 110mm dia soil

pipe with PVC coupling, nuts, mounting cistern on WC., Ragbolt, Gasket Fitiiing and solid verity heavy duty plastic seat cover as per IS-2548, of

approved make; hole in walls/slab/beam and making good etc. complete as per directed by the Engineer's Representative.

EWC-P with PP Soft close Seat cover, Cistern with cistern fittings:

W.C Wall Hung : Jaquar, Model No. : ARS-WHT-39953BIUFSM

Concealed Cistern : Jaquar, Model No. : JCS-WHT-2400FS

Flush Plate : Jaquar, Model No. : JCP-CHR-292415

Providing and fixing in position 15 mm C.P. brass bib cock of best quality including cutting and making good the wall where required etc. complete as

per directed by the Engineer's Representative.

Bib Cock : Jaquar, Model no. FLR-5041N

Providing and fixing 15mm C.P. brass angle valve with wall flange complete, including cutting and making good the wall where required etc.

complete as per directed by the Engineer's Representative.

Angle Valve :Jaquar, Model No. :OPP-15053PM

Providing and fixing of Hand Shower (Health Faucet), with 8mm Dia,1Rmt Long pvc Tube and Wall Hook accessories to .complete the item etc.

complete as per directed by the Engineer's Representative.

Health Faucet :Jaquar, Model no. ALD-CHR-565

Providing and fixing White glazed vitreous Oval Wash Basin Under-Counter, size 560x430x195 mm., with supporting M.S. or C.I. Brackets, necessary pipe

connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, Waste

coupling 32 mm size full thread with 80 mm height Chrome plated, Bottle trap Chrome plated , Pressmatic Pillar Cock including necessary fittings with

wall Flange etc. complete in all respects including cutting and making good the walls etc. complete as per directed by the Engineer's Representative.

Wash basin : Jaquar, Model No. : FLS-WHT-5701

Waste coupling : Jaquar, Model No. : ALD-CHR-705

Bottle trap : Jaquar, Model No. : ALD-CHR-769L300X190

Providing and fixing Pressmatic Pillar Cock of best quality necessary fittings with Flange etc. complete in all respects including cutting and making

good the walls etc. complete as per directed by the Engineer's Representative.

Pressmatic Pillar Cock : Jaquar : KUP-CHR-35011BPM

Providing and fixing Stainless Steel A ISI 304 (18/8) Pantry Sink as per ls:13983 with C.I. brackets and stainless steel plug 40 mm, including painting Of

fittings and brackets, cutting and making gcod the walls wherever required :

Pantry sink with drain board : Nirali ORRA BG

Providing and fixing Sink cock of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the

walls etc. complete as per directed by the Engineer's Representative.

Sink Cock Jaquar - FLR-5357SD

Providing and fixing of C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete, including cutting and making good

the wall where required etc. complete as per directed by the Engineer's Representative.

Braided Hose Copper Pipe : :Jaquar, Model No. :ALD-CHR-805B

Providing and fixing white vitreous china flat back Urinal of size 385x325x635mm as per IS-2556 (Part-2) with C.I. hangers and pipe to wall with C.P.

flange with Sensotronic Sensor Type Urinal flush valve with installation box with control valve Battery / Electric operated automatic flushes of approved

make. System provided with a solenoid valve and valve connected to a 6 volts lithium battery. Unit automatically serves (the range in about 40 cms)

and flushes in two steps. The pre flush is for 2 seconds duration and the final flushing is for 7 seconds duration. The outlet from the flusher shall be

623 connected to urinal with required braided pipes from sensor to urinal flush connection in fixture. Set. 24.00 ₹ 18,500.00 ₹

complete including cutting and making good the walls wherever required etc. complete as per directed by the Engineer's Representative.

Urinal :Jaquar : URS-WHT-13255

Urinal Sensor ,Jaquar, SNR-51097

Providing and fixing in position best Indian make toilet recessed type paper holder complete in all respects including cutting and making good the

walls etc. complete as per directed by the Engineer's Representative.

Toilet Paper Holder : Jaquar, Model no. ACN-CHR-1153S

Providing and fixing in position best Indian make C.P. brass twin way QUOTE and hat hooks fixed into wall with C.P. Brass screws and rawlplugs etc.

complete including cutting and making good the walls etc. complete as per directed by the Engineer's Representative.

Twin Way coat Hook: Jaquar, Model No. :ACN-CHR-1161N

Providing and fixing electrical hand dryer, fully automatic type etc. complete as per directed by the Engineer's Representative.

Hand Dryer : Jaquar : HDR-SSF-AK2807

Providing and fixing of Automatic Fragrance Dispenser fixed to wooden cleats with C.P. brass screws etc. complete as per directed by the Engineer's

Representative.

Fragrance Dispenser: EURONICS, Model No.: EA44

Providing and fixing C.P. brass liquid soap container of best quality etc. complete as per directed by the Engineer's Representative.

Liquid Soap Container : Jaquar, Model no. ACN-1137N

Providing and fixing Urinal partition with frosted glass approx. size 900 MM (H) X 450 MM (W) having 10 MM of glass thickness, including fixing to wall with

suitable brackets all as per manufacturers specification etc. complete as per directed by the Engineer's Representative.

Urinal Partition: Jaquar, Model No. JSE-CHR-110US450X

Providing and fixing of Shower wall mixer system with provision for overhead shower complete with bend pipe, coneccting legs & wall flanges

including necessary fittings etc complete in all respects including cutting and making good the walls etc.

630 Wall Mixer : Jaquar, Model : CON-CHR-273KNUPR Set. 12.00 ₹ 12,175.00 ₹

Shower head, Make : Jaquar, Model : OHS-CHR-1757

Shower arm, Make : Jaquar, Model : SHA-455L400

Providing & fixing stainless steel recessed type soap dish of approved make. Including providing & fixing screws, washers, cutting & making good the

walls etc. complete as per directed by the Engineer's Representative.

Soap Dish : Jaquar, Model No. :ACN-1131N

Providing and fixing towel rail of approved make including, providing and fixing C.P. brass screws, making holes in walls and making good etc.

complete as per directed by the Engineer's Representative.

Towel Rail : Jaquar, Model No. : ACN-1111BNM

Providing and fixing of 25 Litre electrical Storage type water Geyser including all required accessories cutting, chassing and making good the same,

etc. complete as per directed by the Engineer’s Representative.

Electrical Storage Type Water Geyser 25 Litre Storage: Jaquar, Model No.: ELM-WHT-V025 (Elena Vertical)

INTERNAL DRAINAGE AND RAIN WATER WORKS (SOIL, WASTE, VENT AND RAIN WATER PIPING & FITTINGS)

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, fixing, testing and commissioning of 75 mm SWR UPVC PIPE TYPE-B (6Kg/cm2.) with all the engineered support as per detail technical

specification self fit pipe conforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offsets, cowl, access pieces/plugs,

cleanout, etc. jointing with PVC Adhesive joints including holes in walls and making good the same.

Providing, laying and jointing in true line and level 110 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with eachother

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing in position cowel went topipes.

Providing & fixing PVC SWR TYPE B P Trap of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for wash basin/ sink

drain connection with cockroach trap - square flat cut, Satin-matt finish - 150mm x 150mm of approved Make, making necessary slab/ wall/ beam

holes and cutting walls, etc. complete.

Providing & fixing PVC SWR TYPE B of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for urinal drain

connection with floor clean out square cut 150mm- Satin of approved Make, making necessary slab/ wall/ beam holes and cutting walls, etc.

Providing & fixing floor clean out square cut 150mm- Satin of approved Make with making necessary slab/ wall/ beam holes and cutting walls, etc.

Making Khurras 45x45cm with average minimum thickness of 50 mm. cement concrete 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate of

20mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a QUOTE of neat

cement rounding the edge sand making and finishing the outlet complete depth as per site requirement.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter not less than 440grams.

INTERNAL WATER SUPPLY NETWORK

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

645 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. Rmt. 305.00 ₹ 202.97 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

646 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. Rmt. 113.60 ₹ 247.25 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

647 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. Rmt. 64.00 ₹ 330.36 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

648 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. Rmt. 20.00 ₹ 437.66 ₹

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

649 Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings Rmt. 3.00 ₹ 90.93 ₹

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

650 Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings Rmt. 13.00 ₹ 117.97 ₹

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

651 Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings Rmt. 102.00 ₹ 146.65 ₹

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In

652 Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings Rmt. 19.00 ₹ 193.73 ₹

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal

stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent

cement and testing of joints complete as per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder

cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

653 Pipe Diameter above 50MM: UPVC (SCH 80) Rmt. 16.00 ₹ 920.00 ₹

The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per

detail technical specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal

stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent

cement and testing of joints complete as per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder

cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

654 Pipe Diameter above 50MM: UPVC (SCH 80) Rmt. 37.00 ₹ 1,250.00 ₹

The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per

detail technical specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water

655 supply lines) Nos. 1.00 ₹ 1,181.00 ₹

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water

656 supply lines) Nos. 22.00 ₹ 1,770.00 ₹

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water

657 supply lines) Nos. 10.00 ₹ 2,630.00 ₹

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water

658 supply lines) Nos. 6.00 ₹ 3,510.00 ₹

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312 (Latest Edition) of PN 10 class, including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

662 Lowering, laying and jointing in position C. I. D/F Reflux valves including cost of all labour, jointing material, including nut bolts and giving satisfactory Nos. 2.00 ₹ 3,831.00 ₹

hydraulic testing, etc. complete.

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312 (Latest Edition) of PN 10 class, including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Reflux valves including cost of all labour, jointing material, including nut bolts and giving satisfactory

hydraulic testing, etc. complete.

Supply, Installation, Testing and Commissioning of Gun metal 25 mm dia. air release valve.

Supplying, installation, testing and commissioning of 25 mm dia. Heavy Quality Gun metal Pressure Reducing Valve with set of best quality having by-

pass arrangement consisting of the following :

1 No. pressure reducing valve screwed ends,

3 Nos. brass ball valve screwed ends.

Supplying, installation, testing and commissioning of 50 mm dia. Heavy Quality Gun metal Pressure Reducing Valve with set of best quality having by-

pass arrangement consisting of the following :

1 No. pressure reducing valve screwed ends,

3 Nos. brass ball valve screwed ends.

Supplying, installation, testing and commissioning of 65 mm dia. Heavy Quality Gun metal Pressure Reducing Valve with set of best quality having by-

pass arrangement consisting of the following :

1 No. pressure reducing valve screwed ends,

3 Nos. brass ball valve screwed ends.

Supplying, installation, testing and commissioning of 80 mm dia. Heavy Quality Gun metal Pressure Reducing Valve with set of best quality having by-

pass arrangement consisting of the following :

1 No. pressure reducing valve screwed ends,

3 Nos. brass ball valve screwed ends.

Supplying, fitting and fixing of SS 316, Solenoid Valve, confirming to latest IS 8935, PN 16.0, with IP 67 logic controller, float switch, IP 67 Battery, with all

accessories viz. power and control cables, cabinets, hardwares specials, union, flange, cable upto tank, lower & upper level floats with, 3 Nos. brass

669 ball valves screwed ends, etc., to complete the job. Nos. 1.00 ₹ 35,450.00 ₹

EXTERNAL WATER SUPPLY NETWORK

Supply, laying, testing & commissioning external piping (UNDERGROUND) unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support

as per detail technical specification, having thermal stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of

pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of engineer in charge.

Pipe Dia upto 50MM: UPVC SCH

Pipe Diameter above 50MM: UPVC SCH

(External water pipe )

Supply, laying, testing & commissioning external piping (UNDERGROUND) unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support

as per detail technical specification, having thermal stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of

pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of engineer in charge.

Pipe Dia upto 50MM: UPVC SCH

Pipe Diameter above 50MM: UPVC SCH

(External water pipe )

Supply, laying, testing & commissioning external piping (UNDERGROUND) unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support

as per detail technical specification, having thermal stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of

pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of engineer in charge.

Pipe Dia upto 50MM: UPVC SCH

Pipe Diameter above 50MM: UPVC SCH

(External water pipe )

Supply, laying, testing & commissioning external piping (UNDERGROUND) unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support

as per detail technical specification, having thermal stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of

pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of engineer in charge.

Pipe Dia upto 50MM: UPVC SCH

Pipe Diameter above 50MM: UPVC SCH

(External water pipe )

Supply, laying, testing & commissioning external piping (UNDERGROUND) unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support

as per detail technical specification, having thermal stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of

pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of engineer in charge.

Pipe Dia upto 50MM: UPVC SCH