Providing Emenities to Ghee Block at Madanapalli Dairy in Annamayya District

Dismantling of brick masonary in Cement Mortor, including stacking the materials including all incidental and operational charges etc., complete for finished item of work as directed the departmental officers.

Supply and fixing of Alluminium fixed glazing as per drawing using standard powder coated / anodised alluminium section of 190.50 x 40 mm x 3.18mm thick for top frame and section of 88.90 x 40mm 3.18 mm thick bottom frame fitted with 12mm thick Toughned glass glazing fitted with suitable Alluminium glazing chips and approved brand silicon sealent including cost and conveyance of all materials and all labour charges for manufacturing fixing in position using required numbers of screws, bolts and nuts and including labour charges for fixing the frame in position fixing glass to frame etc., complete for finished item of work.

Supply, Manufacturing and fixing of Cubboards made of 19mm thick ISI marked commercial Ply alround boxing verticals, Horizontals for covered with on exposed surfaces, externally and internally and each panel with 9 ply 19mm thick plywood and 9mm thick plw wood with Laminated sheets - MAT finish of 1.00mm thick to each shutter, consist of 6 Nos 100mm long powder coated tower bolt - 2nos, 200 mm long SS handles and other shutter will have 1 no of cupboard lock and 75mm long SS But hinges-3 Nos of each shutter. The above frame will be fixed to the wall with screws, the rate inclusive of screws, handle providing cement self sheets etc., complete for finished item of work.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Supply and Fixing of MS Square pipe Purlins of size 50mm x 50mm x 3.00mm thick of 10.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and Fixing of MS Rectangle Rafters of size 80mm x 40mm x 3.20mm thick of 4.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and fixing in position M.Spipe square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in including cost and conveyance of all materials, labour charges for fabricating and fixing of steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power chargesand all other incidental and operational charges etc., complete

Supply and fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work as per special spn: 108

Supply and fixing of High Polished Granite 16 to 18 mm thick up to 2.43 M other than black/ premium colours including half roundening edges etc., including cost and conveyance of all materials and all labour charges etc., complete.

Supply & Installation of 80 mm thk PUF(polyurathene) walls & partition panels manufactured in continous line,with 0.5mm thk PPGL (pre-painted galvalume ) with RMP (Regular modified Polyester ) coating external sheet /Internal with 0.5 TCT PPGI (Pre painted galvanised iron )with RMP(Regular modified Polyester ) coating & both sides PPGI/PPGI panels for partitions with density of 40+/-2 Kg /m3.with effective cover width of 1000mm -Pre-coated steel is of Z2 quality – Hot Dip Galvanized with Zinc Coating of 150 Gms / Sq.mts. off-white in color, with a coating thickness of 25 microns-consisting of 5 microns of Primer and 20 microns of finished coat. The reverse side has a Grey-backing coat of 5 microns, compatible for bonding of PUF.wall panels joint will be of tongue and grove joint.with flashings ,Accessories ,600RM -Tprofile for Suspension (MAKE -KINGSPANJINDAL/LLOYDS/METECNO)

Filling with carted gravel free from admixture of foreign material in layers of 15cms. Thick, watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers.

Laying of precast concrete blocks supported pavers M35, labour charges for laying and fixing of precast concrete Blocks fro paving of all grades any thickness all sizes and shapes including all labour charges for loading and unloading, laying to disired lines and levels complete a

Filling with Stone dust free from admixture of foreign material watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers.

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.MAT-03423

Painting to walls with 2 coats of acrylic exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and ramains of loose powdered material, including cost and coveyance of all materials to work site and all operational, incidental, labour charges etc,. complete for finished item of work

Providing ornamental band Plastering with haunch at corner of flooring and wall with CM (1:2) with smooth finishing on top etc., including cost and conveyance of all materials and Labour charges etc., complete.

Painting with synthetic enamel paint for New Iron work with 1 coat Zinc Chromate Yellow oxide and 2 coats of of approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 For New Iron Work

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, Centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

Solid Fly-ash Block masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 230 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x230x140)

VCC M20 Naminal mix using 40mm & 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry. Using a minimum quantity of 350 Kgs. Of cement per 1Cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost and all other taxes on all materials including steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete.

Providing dish finishing to the C.C. Surface for having good compaction of CC Surface and to have smooth surface of the road including cost and conveyance of all materials, hire charges of dish and fan, incidental and operational and labour chargesetc., complete for finished item of work as per Standard Specification and as directed by the Department Engineer-inchaarge.

Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, seignior age charges of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786­1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap­splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) concealed in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone metalic box incluidng all labour charges etc.,

Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.Light Point

Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.Fan Point

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).Holder Make: Anchor / Gold Medal Olive / Million Zoom LAMP Make:Phillips / OSRAM / GE / Crompton.

Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.

Supply and fixing of 16A/20A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.

Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA SP MCB including internal connection and labour charges for Flush Mounting etc., complete.

Supply and fixing of Modular type Stepped electronic regulator for sweep AC ceiling fans of 900mm / 1200mm / 1400mm.(Data No. )MAT-02846

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=90 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: As per list of recommended brands as category II (MAT-03348)

Supply and fixing of 18 W LED surface Panel round suitable for surface mounting down light made of poly corbonate 39 L x 155Wx159H millimeter dimesions 1800 lumunes and 100 lumunes per watt efficiency etc., complete with earth connections and not less than 2 years warranty.

Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete

Supply and Run of 2 of 36/0.2mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and Run of 1 of 22/0.3mm (1.5 Sq.mm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and Run of 1 of 14/0.3mm (1.0 Sq.mm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for 4 Nos S.P out goings and for 1 No Incommer including Supply and Fixing of 1 No 40 A DP Isolator and 4 Nos 6-32 A 10kA SP MCBs with internal connections and all labour charges etc., complete for FLUSH Mounting .

Supply and fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands MAT- 05508

Rewinding of Heavy-duty Exhaust fan motor including all necessary material, The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation.300/ 380 mm sweep.300/ 380 mm sweep (MAT-03865)

Providing independent earthling by excavating a trench to a depth of 1.50 M in all soils, as per size specified in the Data, using 20mm dia GI pipe of 1.20 Mtrs length and 2.50 sqmm copper wire 3.00 mts with necessary accessories with hume pipe ring duly providing staggered holes with hard coke and salt layers. As per Standard data 5.1.1

Supply and run of 2 of 6 Sqmm FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete for finished item of work

Supply and transportation of 50W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/ temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >=120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec- 3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. (MAT-03363)

Supply and run of 4 of 10 Sqmm FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete

Supply of 8 way VTPN DB suitable for accomidating 125 A / 160 A 4 pole MCCB as incomer and 8 Nos TP MCBs as out going and with IP 43 protection as per Sl.No.453 of Elec Make: Legrand / Schneider

Supply installation testing and commissioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended LSZH patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets. Makes: As per list of recommended brands as Category I.MAT-04157