CERTAIN REPAIR TO HARDSTANDING, PCC, EXTERIOR PLASTER, BRICK WORK, CEMENT CONCRETE TILES, PRECAST PAVER BLOCKS /CHEQUERED TILES /DURA STONE TILES, KOTA STONE FLOORING AND OUTDOOR TILES TO CERTAIN PLACES AT 217 TRANSIT CAMP, PALCHAN

Amount

Dismantling PVC sheet/ flooring including cleaning the surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for 1.5 mm thick PVC sheets laminated plain coloured marble,mosic or molted finish laid with rubber base adhesive in floors complete all as specified and as directed by Engineer-in-Charge. Make: M/s Krisha Vinyle Ltd,M/s LG Vinyle flooring,M/sPremier Vinyle flooring Ltd

All as per Srl item No. 2.00 above but on skirting.

M&L for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floors complete all as specified and as directed by Engineer-in-Charge. Make: BAJAJ/Unitex/Carpet/Responsive Industries Ltd.

All as per Srl item No. 4.00 above but on skirting.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed by Engineer-in-Charge.

Demolition of PCC in ground floors and pavings n. exc 15cm thickness including below or above ground level complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC D-2 type 1:4:8 (using 40mm graded stone aggregate) in foundations, fillings and Mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC C-2 type 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed by Engineer-in-Charge.

M&L for hard core of gauge n.exc 63mm, with broken stone aggregate, deposited, spread and levelled in layers n.exc 15 cm thick, watered to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC D-2 type 1:4:8 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and as directed by Engineer-in-Charge.

M&L for 100mm thick PCC C-2 type 1:3:6 (using 40mm graded stone aggregate) in floor in sub base complete all as specified and as directed by Engineer-in-Charge.

M&L for providing cement concrete type B-0, 1:2:4 as in mud stops rounded or chemfered complete all as specified and as directed by Engineer-in-Charge.

M&L for 20mm thick screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work/stone masenary built in cement mortar or cement lime mortar including complete all as specified and as directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors but except tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with gery cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block C-1 type 1:3:6 (using 20mm graded stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block C-1 type 1:3:6 (using 20mm graded stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 but excepts blocks, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper (white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engineer-in-Charge. Make of distemper : Asian or equivalent.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engineer-in-Charge. Make: Acrocem/Snowcem and equivalent.

NATHU RAM AND SONS