Construction of Mini MCF 199/24-25

Amount

Mini mcf

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.71:Lettering with black Japan pint of approved brand and manufacture

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD202493/2024-2025:PROVIDING AND FIXING PRECOATED GALVANISED IRON PROFILE SHEETS (SIZE,SHAPE AND PITCH OF CORRUGATION AS APPROVED BY ENGINEER IN CHARGE) 0.35 MM (0.05%) TOTAL COATED THICKNESS WITH ZINK COATING 120 GRAMS PER SQM AS PER IS 277 IN 240 MPA STEEL GRADE 5-7 MICRONS EPOXY PRIMER ON BOTH SIDE OF THE SHEET AND POLYESTER TOP COAT 15-18 MICRONS,SHEET SHOULD HAVE PROTECTIVE GAURD FILM OF 25 MICRONS MINIMUM TO AVOID SCRATCHES DURING TRANSPORTATION AND SHOULD BE SUPPLIED IN SINGLE LENGTH UP TO 12 METERS OR AS DESIRED BY ENGINEER IN CHARGE .THE SHEET SHALL BE FIXED USING SELF DRILLING/SELF TAPPING SCREWS OF CURVED SURFACES.EXCLUDING THE COST OF PURLINS,RAFTERS AND TRUSSES AND INCLUDING CUTTING TO SIZE AND SHAPE WHEREVER REQUIRED

AJMAL NISSAR (BID ID -1967446)

VINODKUMAR K (BID ID -1967620)

Bidder Name

SHEREEF M

VINODKUMAR K

AJMAL NISSAR