REPAIRS / MAINT OF FIRE FIGHTING LINES CONTROL VALVES HYDRANTS HOSE REALS AND CONNECTED ITEMS AT AIR FORCE STATION BIDAR

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying underground cables / pipes etc and getting out in soft / loose soil, complete all as specified and as directed.

Returning filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil, complete all as specified and as directed.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Taking up or down MS ERW steel tubing of 150 mm dia with fittings complete including cutting the pipe complete all as specified and as directed. Note : Excavation and RFR will be measured and paid seprately under the respective items of BOQ.

Relaying the serviceable MS ERW pipe line of 150 mm dia with fittings complete including cutting of pipe complete all as specified and as directed. Note :- 1. cost of MS Specials will be measured and paid seprately under the respective items of schedule. 2. Cost of welding the leakage and cutting the pipe upto the requirement and Misc items required for satisfactory completetion of job deemed to be included in the unit quoted rate.

Supply and fix MS ERW pipe line suitable for existing fire fighting system of dia 150 mm bore , bearing ISI Marke , along with all fittings laid in trenches complete all as specified and as directed.

Supply and fixing air cushion vessel 300 mm dia 1.0 mtr height consists of pressure switch,pressure gauge,valve etc including taking down the old unserviceable air cushion vessel any type complete all as specified and as directed. Make :- Getec/Newage/Padmini

Disconnection and taking down unserviceable double headed yard hydrant valve 63 mm and replacing the unserviceable end Cap, Lugs Grip and Rubber Washer, checknut and Polishing the hydrant carefully and refixing the same after repairs in its original postion complete all as specified and as directed.

Description all as per Ser Item No 8 above but Single headed yard hydrant valve 63 mm dia complete all as specified and as directed.

Disconnection and taking down unserviceable double headed yard hydrant valve 63 mm and S&F New Gun metal Double headed yard hydrant valve 63mm instantatenous with operating wheels, end caps and securing chains ISI Marked complete alongwith necessary fixing materials requried for completion of job complete all as specified and as directed..

Description all as per Ser Item No 10 above but Single headed yard hydrant valve 63 mm dia complete all as specified and as directed.

Disconnection and removing the unserviceable power contactor carefully from Panel board and S&F new power contactor 160 Amp Capacity , 440 V comprising of all accessories type MNX-110 complete all as specified and as directed. Make :- GE / Seimens / L&T.

Disconnection and removing the unserviceable power contactor carefully from Panel board and S&F new power contactor MNX 185 250 Amp Capacity , 440 V comprising of all accessories complete all as specified and as directed. Make :- GE / Seimens / L&T.

Disconnection and removing the unserviceable power contactor carefully from Panel board and S&F new power contactor MNX-80 of 100 Amp Capacity , 440 V comprising of all accessories complete all as specified and as directed. Make :- GE / Seimens / L&T.

Disconnection and removing the u/s spare kit of power contactor carefully from Panel board and S&F new spare kit of power contactor 160 Amp Capacity , 440 V comprising of all accessories type MNX-110 complete all as specified and as directed. Make :- GE / Seimens / L&T.

Disconnection and removing the unserviceable spare kit of power contactor carefully from Panel board and S&F new spare kit power contactor MNX 185 250 Amp Capacity , 440 V comprising of all accessories complete all as specified and as directed. Make :- GE / Seimens / L&T.

Disconnection and removing the unserviceable spare kit of power contactor carefully from Panel board and S&F new spare kit power contactor MNX-80 of 100 Amp Capacity , 440 V comprising of all accessories complete all as specified and as directed.. Make :- GE / Seimens / L&T.

Disconnection and removing the unserviceable power contactor carefully from Panel board and S&F new power contactor 25 to 32 Amp Capacity , 440 V comprising of all accessories complete all as specified and as directed.. Make :- GE / Seimens / L&T.

Taking down unserviceable hose reel drum alongwith hose including S&F new hose reel drum with 19mm dia minimum 30 Meter long re-inforced rubberised fabric hose including 6.35mm dia nozzle with a ball valve swing type, recessed as per sample complete, hose (BIS mark) conforming to IS : 636, type II and complying to IS : 903 as replacement at requirement basis of fire fighting area complete all as specified and as directed.

Taking down unserviceable corroded/broken Hose Box and S&F new Hose Box made of 18 gauge MS Sheet 800 x 600 x 250mm with double door with 4mm thick glass and door frame made of 16 gauge MS Sheet painted with fire red oxide and brilliant white inside the box complete all as specified and as directed.

Taking down universal type serviceable sprinkler quick/ early response type as per IS : 15105/TAC guidelines, 68 degree temperature rating complete from any height of the Hangers and other technical buildings and servicing the same including renewal of Misc items if any and refixing the same in its orignal position complete all as specified and as directed.

Disconnection and removing unserviceable sprinklers from any height of the building carefully and S&F New Sprinkler universal type, quick/ early response type as per IS : 15105 / TAC guidelines, 68 degree temperature rating complete in Hangers and other technical buildings complete all as specified and as directed. Make :- 7 Star / Tyco / Getech

Disconnection and removing the AFPP Oscillating type system Foam Monitor of capacity not less than 1800 LPM and servicing/Overhauling of the Foam Monitoring unit complete including renewal of unserviceable Parts, check nuts, monitoring system, cover, proposing devicer by specialist and dual jet and re-fixing the same in its original position complete all as specified and as directed.

Disconnection and removing the unserviceable AFPP Oscillating type Foam Monitor system S&F New AFPP Oscillating type foam monitor system unit of capacity not less than 1800 LPM complete all as specified and as directed.

Disconnection and removing the AFPP Oscillating type system Water Monitor of capacity not less than 1800 LPM and servicing / Overhauling of the Water Monitoring unit complete including reneuval of unserviceable Parts, check nuts, monitoring system and cover and re-fixing the same in its original position complete all as specified and as directed.

Disconnection and removing the unserviceable AFPP Oscillating type Water Monitor system S&F New AFPP Oscillating type Water monitor system unit of capacity not less than 1800 LPM complete all as specified and as directed.

Disconnection and removing the pipe line connections connected to the Diesel Engine of Capacity 125 KW /167 HP (at Parachute Building), Type 4R 1040, Make :- KOEL unit carefully for finding out the defects and Servicing/ Over hauling the same and including Replacement of unserviceable Fuel Filters, Air filters, Oil filters, Fan belt, Hose Pipe sets, Engine Oil, Coolant, Bearings complete and refixing the same in its original position couple with the pumpset and connecting the pipe line testing and commisioning complete all as specified and as directed. for the following :- Note : - (i) All the misc items and Fuel Filters, Air filters, Oil filters, Fan belt, Hose Pipe sets, Engine Oil, Coolant, Bearings not covered under the scope of work but required for satisfactory completion of job deemed to be included in the unit rate.

Description all as per Item No 27 above but of capacity 58 KW/79 HP (at New ATC Building) complete all as specified and as directed.

Description all as per Item No 27 above but of capacity 44.2KW/60 HP (at Air Field FF Pump house) complete all as specified and as directed.

Disconnection and removing the Fire Fighting Pumps of Capacity 167 to 170 HP, Head 90 Mtr, Discharge 4590 LPM connected to the Diesel Engine of Capacity 125 KW /167 HP (at Parachute Building) alongwith connections and overhauling the same complete including reneuwal of worn out bearings, metalling & Polishing the shaft, Coupling Unit, Oil Seal, Gland, Impeller Sleeves, Impeller lock nuts, complete and re-fixing the pump in its original postion after completion of repairs and overhauling connecting the pipelines testing and commisioning complete all as specified and as directed. Note :- (i) All the misc items not covered under the scope of work but required for satisfactory completion of job deemed to be included in the unit rate.

Description all as per Item No 30 above but of capacity 50 to 60 HP (at Air Field FF Pump house) complete all as specified and as directed.

Description all as per Item No 30 above but of capacity 79 HP (at New ATC Bldg) complete all as specified and as directed.

Disconnection and removing the Fire Fighting Jockey Pumpset of Capacity 10 to 15 HP, 440V connected to the Fire Fighting system (at Parachute Building, Air Field FF Pump house & New ATC Bldg) alongwith connections and overhauling the same complete including reneuwal of worn out bearings, metalling & Polishing the shaft, Coupling Unit, Oil Seal, Gland, Impeller Sleeves, Impeller lock nuts complete and re-fixing the pump in its original postion after completion of repairs and overhauling connecting the pipelines testing and commisioning complete all as specified and as directed. Note :- (i) All the misc items not covered under the scope of work but required for satisfactory completion of job deemed to be included in the unit rate.

Disconnection and removing the unserviceable pressure guage and S&F Pressure gauge 8"dial 0-21 kgs rating ISI Marked complete all as specified and as directed.

Disconnection and removing the unserviceable pressure guage and S&F Pressure gauge 4"dial 0-21 kgs rating ISI Marked complete all as specified and as directed.

Disconnection and removing the unserviceable/ broken Stainless Steel along with the check nuts & gate from the Sluice valve of Size 80 mm dia and M&L for New Spindle of same size & capacity with Brass/Stainless Steel Check nuts including polishing, mechining, threading and necessary lathe work complete all as specified and as directed.

Description all as per item No 36 above but of capacity 100 mm dia sluice valve complete all as specified and as directed.

Description all as per item No 36 above but of capacity 150 mm dia sluice valve complete all as specified and as directed.

Disconnection and removing the unserviceable Sluice Valve 80mm dia and S & F Sluice Valve 80mm dia, IS-14846, PN 1.6 brass/stainless steel spindle with hand wheel head, screwed both ends for GI Pipe 80 mm dia complete all as specified and as directed.

Description all as per item No 39 above but of capacity 100 mm dia sluice valve complete all as specified and as directed.

Description all as per item No 39 above but of capacity 150 mm dia sluice valve complete all as specified and as directed.

Disconnection and removing the unserviceable Non Return Valve 150 mm dia and S & F Non Return Valve 150 mm dia, both end flanged including provn of new gasket and nuts, bolts and washers and fixed complete all as specified and as directed. Make : Kirlosker / Upadhyaya / RMCO / Kartar

Disconnection and removing the unserviceable CI Foot Valve and S & F CI Foot valve 100 mm dia with all fittings including flanges, leather washer, fasteners for fitting such as necessary size nut bolt and washer, rubber packings / joining materials complete including taking down the old unserviceable one complete all as specified and as directed.

Description all as per item No 43 above but of capacity 150 mm dia CI Foot valve complete all as specified and as directed.

Desccription all as per item No 43 above but of capacity 200 mm dia CI foot valve complete all as specified and as directed.

Disconnection and removing the unserviceable CI Butterfly Valve 80mm dia and S & F CI Butterfly Valve 80mm dia, (Wafer Type) PN 1.6 brass/stainless steel spindle with hand wheel head, screwed both ends, ISI Marked complete all as specified and as directed.

Description all as per item No 46 above but of capacity 100 mm dia complete all as specified and as directed.

Description all as per item No 46 above but of capacity 150 mm dia complete all as specified and as directed.

Description all as per item No 46 above but of capacity 200 mm dia complete all as specified and as directed.

Disconnection and removing the unserviceable Lead Acid Battery and S&F Lead Acid Battery, 12Volt, 180 AH with Initial fully charged alongwith electrolyte and other accessories complete all as specified and as directed. Make :- Exide / Amco / Amron

Disconnection and removing the unserviceable MCCB 250 Amps capacity and Supply and fix MCCB 4 pole 36 KA 250 Amps 440 volts MCCB along with fixing arrangements complete all as specified and as directed. Make :- L&T Type DN2-250D or its equivalent approved make as per list of makes

Disconnection and removing the unserviceable MCCB 200 Amps capacity and supply and fix MCCB 4 pole 36 KA 200 Amps 440 volts MCCB along with fixing arrangements complete all as specified and as directed. Make :- L&T Type DN2-250D or its equivalent approved make as per list of makes

Disconnection and removing the unserviceable battery lead connection and M&L for battery connected leads made out of PVC Single core 1100 volts grade bunched copper conductor upto 1.5m long including one end soldered with a copper lug and the other end soldered with a brass terminal along with nut, bolt and washer complete all as specified and as directed.

Disconnection and removing the unserviceable battery lead connection and M&L for battery connected leads made out of PVC Single core 1100 volts grade bunched copper conductor upto 0.6 m long including both end soldered with a brass terminal along with nut, bolt and washer for interconnection of batteries complete all as specified and as directed.

M&L painting with enamelled paint of postal red colour on iron/steel surface of any description over 10 cm in width or girth, not other wise described including preparation of old painted surface for free from dust and deposits complete all as specified and as directed.

M/s.Santosh Kotarki

Cross Fire System