REPAIR POLISHING TO WOODEN STEEL FURNITURE AND EXISTING CHARPOY UNDER GE EAST BAREILLY

Amount

ALMIRAH LARGE STEEL WITH SHELVES (FD-67/1031) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Removing unserviceable locks and S&F brass/Steel lock with duplicate key (Make-GODREJ/HETTICH/LINK) 6 lever as per drg.

Removing unserviceable locking device and S&F new locking device including MS Rod rest all as per drg.

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking out unserviceable shelves and S&F new shelves made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

M&L for spray painting two coats of synthetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES (FD-1032/243) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Removing unserviceable locks and S&F brass/Steel locks of any type 6 lever (Make-GODREJ/HETTICH/LINK) as per drg.

Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

M&L for spray painting two coats of synthetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

LOCKER BED SIDE STEEL (FD-1029/257) Removing unserviceable handle and S & F CP handle 100 mm as per drg.

Removing unserviceable hasp and stepple and S&F new hasp and stapple chromiun plated as directed by Engr in Charge.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing.

Removing unserviceable locking arrangement and S&F new locking arrangement (Make-GODREJ/HETTICH/LINK) as per drg.

M&L for spray painting two coats of syntetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

TABLE 3',x2' STEEL WITH DRAWER (FD-1008) Removing old u/s top and S&F new Top shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade approved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Taking out unserviceable leg ) and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg.

Removing of unserviceable long rail/long siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg.

Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever (Make-GODREJ/HETTICH/LINK) 6 lever as per drg.

Removing unserviceable drawers and S&F new drawers made out of 1mm thick MS sheet as per drg.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M&L for spray painting two coats of synthetic enamel paint (FD-1008) (Colour shade as approved) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and direc by Engr-in Charge.

TABLE 3',x2' STEEL WITHOUT DRAWER(FD-1007) Removing old u/s top and S&F new Top shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade approved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg.

Removing of unserviceable short rail/siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg.

Removing of unserviceable long rail/long siffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg.

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing.

M&L for spray painting two coats of syntetic enamel paint (Colour shade as approved) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

TABLE OFFICE CLERK STEEL(FD-84/FD-1004) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed ;machine complete rest all as per drg

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Adjustment of drawers where ever reqd as directed by Engr in Charge

Removing old u/s locks of drawer and S&F brass locks of any type 5 lever (Make-GODREJ/HETTICH/LINK) as per drg.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M&L for spray painting two coats of syntetic enamel paint (Colour shade as approved) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and direc by Engr-in Charge.

TABLE OFFICE OFFICER STEEL (FD-84/1003) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever (Make-GODREJ/HETTICH/LINK) as per drg.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M&L for spray painting two coats of syntetic enamel paint (Colour shade as approved) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

TEAPOY VERANDAH/MAP (FD/E6/MAP/17) Taking out unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

Removing M&L for spray painting two coats of synthetic enamel paint (Colour shade as approved) over a coat of red oxide primer complete after preparion of surface by scrapping and removing dust dirt etc including denting as required all as specified and direc by Engr-in Charge.

CHAIR REVOLVING/CHAIR EXECUTIVE (TP) Seat & Back : Removing the existing old unserviceable seat and back from the chair and re-upholestering with new estry/Fabric/Leatherite Rexene cloth approved quality after providing cushion of 40mm 32 density PU foam of Make:Sleepwell/Kurl On fixed over 12mm BWR plywood all as specified on drg and as directed by Engr in Charge.

Castor Wheel : Removing the existing unserviceable or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Handle : Removing the existing broken/ unserviceable handle from the chair and S&F new handlemade out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed

Bottom Base : Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Gas lifting Hydrolic System : Removing the existing unserviceable Gas lifting Hydrolic System of various types from the Chair. Supply and fix new Gas lifting Hydrolic System to the chair in suitable pattern/model to match in original all as specified on drg and as directed by Engr in Charge.

TABLE BED SIDE MAP (FD-E6/MAP/15(R) Removing old u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade approved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing old u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE in front side with 12mm BWR grade plywoodapproved make andin thrree sides and 6mm BWR plywood (Make: Greenply/Century/Duro) as bottom along with Chromium Plated handles(Approved by GE) with all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE in front side with 12mm BWR grade plywood (Make: Greenply/Century/ Duro) in thrree sides and 6mm BWR plywood (Make: Greenply/Century/Duro) as bottom along with Chromium Plated handles (Approved by GE) all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

M&L for painting /Polishing two coats of synthetic enamel paint/french polish over a coat of red oxide primer as required complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

TABLE COMPUTER (FD/E6/MAP/03) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed ;machine complete rest all as per drg

Removing old u/s Shelves/bottom and S&F new shelves/bottom made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE along with telescopic chanell as directed by Engr-in-Charge

Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE.

Welding to steel frame of computer table.

Removing old u/s shoe and S&F new PVC adjustable shoe superior quality as approved by GE shall be provided.

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHAIR COMPUTER (FD/E6/MAP/01) Repair/Replacement of old broken unservicable leatherite rexine with new rexine of best quality matching colour seat of computer chair.

Replacement of old unservicable foam with New foam 32 density 2'' fixing with seat Make: Sleepwell/Kurl on.

Replacement of old unservicable handle for chair computer and S & F new handle for chair computer of best quality complete all as specified and directed.

Repair/Replacement of old unservicable pedestal assemly of chair computer and S & F of new pedestal assemly of chair computer all as specified and directed pl.

Replacement of old broken wheel and providing new wheel of computer chair superio quality as approved by GE.

CHAIR WRITING MAP (FD-E6/MAP/12) Repair/Replacement of old unservicable upholstry of seat & back from chair writing MAP and S&F new upholstry duly stitched as per drawing.

New upholstry duly stitched and with PVC lipping all round as per drawing.

Replacement of old unservicable foam with New foam 32 density 2'' fixing with seat Make: Sleepwell/Kurl on.

Repair/Replacement of rubber complete all as specified and directed.

CHAIR CB STEEL WITH ARM/WITHOUT ARM (FD-75) Removing the existing old unserviceable seat and back from the chair CB steel and S&F new seat and back with weaving of cane as a Godrej pattern . Cane should be 2mm wide with 4mm border (Make- Primier/Saha) seat and back will be fixed with required nut and bolts all as specified and directed.

Replacement of old/us PVC shoes and S&F new PVC shoes where ever required at the bottom frmame of the chair CB steel all as specified and directed.

Replacement of old/us PVC rubber cap on back of chair CB steel on top of frame of the chair and S&F new PVC rubber cap where ever required at the top frame of the chair CB steel all as specified and directed.

Removing the existing old unserviceable wooden Arms of Chair CB steel and S&F new wooden Arms will be fixed with required screws all as specified and directed.

S & F flat iron stiffner 25mmx535mmx3mm thick shall be welding at the bottom of seat/top of back for chair CB steel with or without arm all as specified and directed .

M&L for spray painting two coats of syntetic enamel paint (Colour shade as approved) and polishing/shining with specified colour in seat, back and arm rest. complete after preparion of surface by scrapping and removing dust dirt etc including denting as required and the broken accessories should be welded all as specified and direc by Engr-in Charge.

CHAIR VERANDAH (FD-359) Removing the existing old unserviceable nylon newar and cane from the chair verandah and reweaving with cane of seat and back of chair verandah. Cane should be 4mm wide (Make- Primier/Saha) all as specified and directed.

Replacement of old/us PVC shoes and S&F new PVC shoes shall be fixed at the bottom of the legs of chair verandah and all as specified and directed.

M&L for painting two coats of syntetic enamel paint white colour (Make-Berzer/Asian) and complete after preparion of surface by scrapping and removing dust dirt etc including denting as required and the broken accessories should be welded all as specified and directed by Engr-in Charge.

BED HARD STEEL MAP (FD-E6/MAP/08 (R) Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Duro) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood (Make: Greenply/Century/Duro) made to shape & size as shwon on drawings, complete all as specified and directed

Removing old u/s head rest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing.

Removing old u/s footrest and S&F new footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing including dismatling of old unserviceable top without disturbing the othe parts.

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHARPOY WITH HARD TOP (MS TUBE) (FD/MAP-II/01) Removing old u/s top and S&F new top of plywoodapproved make and top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood approved make and made to shape & size as shown on drawings, complete all as specified and directed by GE.

M&L for welding on breakable joints of the complete frame of charpoy with iron filler rod all as specified and directed

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

RACK SHOE STEEL (FD-E6/MAP/02(R) M&L for repairing of steel frame of shoe rack to make as per shape & size as shwon on drawings, complete all as specified and directed by GE.

M&L for repairing of steel shelves of shoe rack to make as per shape & size as shwon on drawings, complete all as specified and directed by GE.

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

Replacement of old/us PVC shoes and S&F new PVC shoes shall be fixed at the bottom of the legs of chair verandah and all as specified and directed.

TABLE BED SIDE (FD-276/FD-248) Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade approved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us self and S&F new self made of 12 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us back ply and S&F new back ply made of 6mm thick plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

M&L for applying two coats of french polish on all exposed sufraces of table bed side including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces.

SIDE BOARD (FD-241) Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us shutters and S&F new shutter made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade approved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us handles and S&F new Chromium Plated handles(Approved by GE) of 100mm long shall be provided for shutters/drawers.

Replacement of old/us shelves and S&F new shelves made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us back ply and S&F new back ply made of 6mm thick plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us base and S&F new Base made of 1st class teak wood all as specified and shown in drg.

M&L for applying two coats of french polish on all exposed sufraces of side board including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces.

STOOL DRESSING CUSHIONED (FD-E6/MAP/14) Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of unserviceable cushion for seat with new cushion of Stool Seat comprising single piece of seat made of foam 40D of size as per seat make: Sleep Well (Featherfoam)/ Kurlon(Gold) duly covered with tapestry cloth complete all as directed by GE and shown on drg no.FD-E6/MAP/14 and place shoes of superior qualit at the end of legs complete all as directed.

M&L for applying two coats of french polish on all exposed sufraces of stool dressing including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces.

HAT STAND WITH MIRROR (FD-233) Replacement of old/us Mirror of Hat stand and S&F new Mirrior 5mm thick as per drg. (Make: Modiguard/Atul/Saint Gobbain)

Replacement of old/us Brass pegs and S & F new Brass pegs superior quality as approved by GE.

Replacement of old/us Fornt sides ply and S&F new ply made of 4mm thick face plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us back ply and S&F new ply made of 6mm thick plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us wooden frame and S&F new wooden frame all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of hat stand with mirror including cleaning and preparing the surface including a coat of wood filler on wooden surface as well as on teak face ply.

TABLE DRESSING GENTS WITH MIRROR (FD-230/379) Replacement of old/us Mirror of Table dressing gents and S & F new Mirror 5mm thick as per drg. (Make:Modiguard/Atul/Saint Gobbain)

Replacement of old/us top and S & F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us Bottom and S&F new Bottom made of 18/19 mm thick Prelaminated MDF Board exterior gradeapproved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

M&L for applying two or more coats of french polish on all exposed surfaces of table dressing gents including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE DRESSING LADIES WITH MIRROR(FD-251/378) Replacement of old/us Mirror of Table dressing ladies and S&F new Mirror 5mm thick as per drg.(Make: Modiguard/Atul/Saint Gobbain)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us Bottom and S&F new Bottom made of 18/19 mm thick Prelaminated MDF Board exterior gradeapproved make and ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us Sliding glass and new Sliding glass shutters 5.0 mm thick plain glass as specified and shown in drg

Replacement of old/us base and S&F new Base made of 1st class teak wood all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of table dressing ladies including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TEAPOY WOODEN (FD-278 and FD-382) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails/short stiffner and S&F new short rails/short stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails/long stiffner and S&F new long rails/long stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of Teapoy wooden including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE 3'x2' WITH DRAWER (WOODEN) (FD-283 Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails/long stiffner and S&F new long rails/long stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails/short stiffner and S&F new short rails/short stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of table 3'x2' with drawer including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE PEG (FD-384 & FD-277) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails/long stiffner and S&F new long rails/long stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails/short stiffner and S&F new short rails/short stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of Peg Table including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE WRITING (FD-275 & FD-276) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us back ply and S&F new ply made of 6mm thick plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us Stiffeners and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us lock of drawers and S & F new brass lock 6 lever 50 mm all as per drg complete.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of Table writing including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE CENTER (FD-274 & FD-375) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails/long stifner and S&F new long rails/ long stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails/short stiffner and S&F new short rails/short stiffner made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of table center including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

BED HARD (FD-247) Replacement of old/us plywood top and S&F new plywood top made of 12 mm thick Plywood approved make and of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Head Board and S&F new Head Board made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Foot Board and S&F new Foot Board made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Steel bent clamp for corner and S & F new Steel bent clamp for corner all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of Bed Plywood including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

CHAIR DINING OFFICERS (FD/E6/MAP/10(R) Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Fornt or Back rail and S&F new Fornt or Back rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1nd class teak wood all as specified and shown in drg.

Replacement of old/us Back strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

Replacement of old/us Seat and S&F new Seat made made of foam 40D Make: Sleep Well, Featherfoam, Kurlon(Gold) duly covered with tapestry cloth with fixed over 12 mm Plywood approved make andof BWR Grade ISI Marked confirming to IS-303. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by GE. The sample of cloth is kept with BSO GE (East)Bareilly.

M&L for applying two or more coats of french polish on all exposed sufraces of chair dining(MAP) including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE DINING 6/8 PERSONS (FD-273 / FD-30(M) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us corner cleat and S&F new corner cleat all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of table dining 6/8 persons including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

SOFA SET 5 SEATER (FD/MAP-II/02, FD-373) (a) Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us seat & back long rail of three seater and S&F new seat & back long rail made of 1st class teak wood.

Replacement of old/us Stiffeners of seat & back of 3 seater support and S&F new Stiffeners of seat & back of 3 seater made of 1nd class teak wood all as specified and shown in drg.

Replacement of old/us Front, Back & Side rails of single seater and S&F new Front, Back & Side rails of single seater made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners of seat & back of 1 seater support and S&F new Stiffeners of seat & back of 1 seater made of 2nd class teak wood all as specified and shown in drg

Replacement of unserviceable cushion for seat/back with new cushion of sofa set 4/5 Seater comprising single piece of seat/back each made of foam 40D of size 22”X21”X100/95mm Make: Sleep Well (Featherfoam)/ Kurlon(Gold) duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends superior quality complete all as directed by GE and shown on drg no.FD/MAP/II/02. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by GE. The sample of cloth is keept with BSO GE (East) Bareilly.

M&L for applying two or more coats of french polish on all exposed sufraces of sofa set 5 seater including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

SOFA SET 4 SEATER (FD/MAP-II/02 & FD-281) Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front, Back & Side rails of single seater and S&F new Front, Back & Side rails of single seater made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners of seat & back of 1 seater support and S&F new Stiffeners of seat & back of 1 seater made of 2nd class teak wood all as specified and shown in drg

Replacement of old/us Seat & Back strip and S&F new Seat & Back strip made of 1st class teak wood all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of sofa set 4 seater including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TEAPOY VERANDAH (FD-383) Removing old u/s top and S&F new top made of 18/19 mm thick MDF Board exterior grade (Grade-I, Type-II) ISI marked confirming to IS-14587 (Make- Action Tesa/Century Proud from Century Ply/Green Panelmax from Green Ply) duly pos- formed with 0.6mm thick laminate in coolur /shade as appreved by Engr-in-charge . GE with 2mm thick PVC edging of Make- Rehau/Pegasus/Kynex shall be fixed on two sides with stong bonded chemical adhesive through hot pressed ;machine complete rest all as per drg

Replacement of old/us legs support and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of Teapoy Veranda including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

CHAIR DINING CANE (FD-279) Removing existing us cane from chairs dining and S & F new cane 2 mm wide half round and 4 mm wide on borders, reweaving with new cane half round gola Make- Premier/Saha or approved equivalent all as specified and directed.

Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Fornt or Back rail and S&F new Fornt or Back rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Back strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of chair dining cane including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

CHAIR EASY (FD-229) Removing existing us cane from chairs Easy and S & F new cane 2 mm wide half round and 4 mm wide on borders, reweaving with new cane half round gola Make- Premier/Saha or approved equivalent all as specified and directed.

Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Fornt or Back rail and S&F new Fornt or Back rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us left and right Arms rest and S&F new left and right Arms rest made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us 4 Back rail and S&F new Back rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S & F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of chair dining cane including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

CHAIR WRITING (FD-280) Removing existing us cane from chairs writing and S & F new cane 2 mm wide half round and 4 mm wide on borders, reweaving with new cane half round gola Make- Premier/Saha or approved equivalent all as specified and directed.

Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Fornt or Back rail and S&F new Fornt or Back rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us left and right Arms rest and S&F new left and right Arms rest made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Back strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of chair dining cane including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.Note :-Tenderer may note that credit amount will be deducted from the total amount arrived, at the time of Acceptance of contract.

CHAIR DINING LONG BACK FOR OFFR MESS Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Fornt or Back rail and S&F new Fornt or Back rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1nd class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

Replacement of old/us Seat, Back and S&F new Seat and Back made of foam 40D Make: Sleep Well, Featherfoam, Kurlon(Gold) duly covered with tapestry cloth with fixed of existing chair , approved make and of BWR Grade ISI Marked confirming to IS-303. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by GE. The sample of cloth is kept with BSO GE (East)Bareilly.

M&L for applying two or more coats of french polish on all exposed sufraces of chair dining long back for Offr Mess including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

CHARPOY GI PIPE WITH NYLONE NEWAR AND PLY TOP Removing of old unserviceable nylone newar from Charpoy GI Pipe and checking the same i.e long rail , short rail, legs and 3 way joints and check nut. Checking the serviceability of Charpoy GI pipe, the charpoy pipe frame , check nut and elbow , legs, long rail short rail will be tightened as required and directed by the Engr-in- Charge

Distmantling of GI Pipe broken long rail from charpoy GI pipes and S & F new long rail 32mm nominal bore pipe medium grade Make-TATA/JINDAL/Prakash or equivelant duly threaded at both ends complete all as specdified and directed

Replacing of Broken Short rail of Charpoy GI Pipe to be made from retrived long rail from item Ser No-2 above by cutting and threading at both ends, complete and all specified by Engr-in-Charge.

Replacing of Broken legs of Charpoy GI pipe to be made from retrived short rails from above mentioned charpoy GI Pipe by cutting and threading at both ends, complete and all specified by Engr-in Charge

Dismantling of old unserviceable Galvanished steel three way elbow form charpoy GI Pipe and S& F new elbow ISI marked suitable for 32mm nominal bore pipe complete all as specified and directed

Dismantling of old unserviceable CI Check nut from Charpoy GI Pipe and S& F new check nut 10mm thick suitable for 32mm nominal bore pipe complete all as specified and directed

S & F Ply Top of size 1980mmx900mm of 12mm thick , BWR Grade ISI marked and including two Nos of flat iron of size 25mm wide x 4mm thick x 900mm long fixed on long rail paralled to short rail on equal distance of bracing the long rails with and including 14 (fourteen) Nos of round headed steel nut, bolts and washers of appropriate size by making holes with dril machine, flat iron surface shall be painted with two coat of black synthetic enamel paint and including a coat of primer complete all as specified and directed. (Make-Century/Green Ply/Kit Ply)

S & F MS sheet 50mm dia 3mm thick as round bottom disc fixed to each leg of Charpoy GI pipe with welding around leg complete all as specified and directed

CHAIR VERANDAH MAP. Replacement of old/us PVC shoes and S&F new PVC shoes shall be fixed at the bottom of the legs of chair verandah and all as specified and directed.

M&L for painting two coats of syntetic enamel paint white colour (Make-Berzer/Asian) and complete after preparion of surface by scrapping and removing dust dirt etc including denting as required and the broken accessories should be welded all as specified and directed by Engr-in Charge.

CHARPOY IP FOLDING Removing old unsv ply top and S&F 12mm new Ply Top BWR grade (Make- Century Ply/Greenply/Archidply) as per existing shape and size with 10 Nos shunken nut/bolts , appropriate hole shall be made with electric drill machine completer rest all as drg and as directed

Hard rubber shoe std quality as per drg.

M&L for painting two coats of syntetic enamel paint white colour (Make-Berzer/Asian) and complete after preparion of surface by scrapping and removing dust dirt etc including denting as required and the broken accessories should be welded all as specified and directed by Engr-in Charge.( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

GUPTA IRON UDYOG

M/S ABHISHEK ENTERPRISES

F.M. KHAN SONS

JAISWAL ENTERPRISES

Kushwaha Enterprises

M/s M K Enterprises