R/M of LWSS Mohar Deothal, LWSS Dimber Redi Gussan LWSS Dhudham Batol under Division Rajgarh Tehsil Rajgarh Distt. Sirmour

Amount

Mohar Deothal

Supply, erection, testing & commissioning of submersible pumping set of reputed make such as KSB/BS/ Johnston/ Worthington/Oswal/Sabar Brand conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having characterstics as mentioned in item 5(A) greased packed bearings & shell with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, tubler pipe fitted with outlet of tank with suitable arrangement welding/connecting to GI pipe (G.I pipe/Tubler pipe for pump will be issued by the department free of cost) cable clips. & depth gauge etc. & suitable for operation of data given below:- NOTE out of 2 Nos pumps 1 No. pump set will run and other will act as stand by.

Total Head 190.00 mtr

Capacity of each pump set 0.90 LPS

Dia of R/Main 32 mm dia

Length of rising main (in metres) 1250 mtr

Providing and fixing of auto control panel with push button star delta starter for submersible pump of L&T and reputed make fabricated with M.S. sheet and angle stand duly painted and complete with internal wiring, comprising of main switch of suitable Amp., T.P. volte meter, ameter, hour run metre, phase indicating lamps with GMS based, remote start/stop operation call/SMS for feedback regarding running of pumps & breakdown message, timer scheduling for fixed hour in a day, imbuilt protection against overload/ undervoltage, dry run, single phase preventer, inbuilt GPS tracker, phase reversal configurable volt/current limits with a facility to access the systemthrough minimum 10 No. authenticate mobile Nos. complete in all respect, including intire carriage of materials all leads and lifts, installation and testing at site with entire saisfaction of engineer-in-incharge.

Supplying and fixing in position at site of Kirloskar/Kilburn/IVC/Fouress/ GLED/BHEL/Leader/ KSB make of suitable size cast steel double flanged swing check type reflux valve for delivery line of pump having bye pass arrangement and size one size larger than the nominal diameter of delivery size of pump and capable of withstanding nominal delivery size of pump and capable of withstanding nominal seat pressure as mentioned in item No.1 (a) and conforming to BIS/API standards with up to date ammendments for delivery line of pump class-C steel ASA 150,40mm dia.

Stand by only supllied no installation (including testing) submercible pumping set of reputed make such as KSB/BS/Johnston/Kirlosker/Wothington/Oswal/Sabar Brand confirming to latest relevant BIS Code.

Dimber Redi Gussan

Supply, erection, testing & commissioning of submersible pumping set of reputed make such as KSB/BS/ Johnston/ Worthington/Oswal/Sabar Brand conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having characterstics as mentioned in item 5(A) greased packed bearings & shell with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, tubler pipe fitted with outlet of tank with suitable arrangement welding/connecting to GI pipe (G.I pipe/Tubler pipe for pump will be issued by the department free of cost) cable clips. & depth gauge etc. & suitable for operation of data given below:- NOTE out of 2 Nos pumps 1 No. pump set will run and other will act as stand by.

Total Head 190.00 mtr

Capacity of each pump set 0.90 LPS

Dia of R/Main 65 mm dia

Length of rising main (in metres) 1602 mtr

Providing and fixing of auto control panel with push button star delta starter for submersible pump of L&T and reputed make fabricated with M.S. sheet and angle stand duly painted and complete with internal wiring, comprising of main switch of suitable Amp., T.P. volte meter, ameter, hour run metre, phase indicating lamps with GMS based, remote start/stop operation call/SMS for feedback regarding running of pumps & breakdown message, timer scheduling for fixed hour in a day, imbuilt protection against overload/ undervoltage, dry run, single phase preventer, inbuilt GPS tracker, phase reversal configurable volt/current limits with a facility to access the systemthrough minimum 10 No. authenticate mobile Nos. complete in all respect, including intire carriage of materials all leads and lifts, installation and testing at site with entire saisfaction of engineer-in-incharge.

Supplying and fixing in position at site of Kirloskar/Kilburn/IVC/Fouress/ GLED/BHEL/Leader/ KSB make of suitable size cast steel double flanged swing check type reflux valve for delivery line of pump having bye pass arrangement and size one size larger than the nominal diameter of delivery size of pump and capable of withstanding nominal delivery size of pump and capable of withstanding nominal seat pressure as mentioned in item No.1 (a) and conforming to BIS/API standards with up to date ammendments for delivery line of pump class-C steel ASA 150,40mm dia.

Stand by only supllied no installation (including testing) submercible pumping set of reputed make such as KSB/BS/Johnston/Kirlosker/Wothington/Oswal/Sabar Brand confirming to latest relevant BIS Code.

Dudham Batol

Supply, erection, testing & commissioning of submersible pumping set of reputed make such as KSB/BS/ Johnston/ Worthington/Oswal/Sabar Brand conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having characterstics as mentioned in item 5(A) greased packed bearings & shell with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, tubler pipe fitted with outlet of tank with suitable arrangement welding/connecting to GI pipe (G.I pipe/Tubler pipe for pump will be issued by the department free of cost) cable clips. & depth gauge etc. & suitable for operation of data given below:- NOTE out of 2 Nos pumps 1 No. pump set will run and other will act as stand by.

1st stage

Total Head 377.29 mtr

Capacity of each pump set 0.90 LPS

Dia of R/Main 65 mm dia

Length of rising main (in metres) 790 mtr

Iind Stage

Total Head 349 mtr

Capacity of each pump set 0.90 LPS

Dia of R/Main 50 mm dia

Length of rising main (in metres) 725 mtr

Providing and fixing of auto control panel with push button star delta starter for submersible pump of L&T and reputed make fabricated with M.S. sheet and angle stand duly painted and complete with internal wiring, comprising of main switch of suitable Amp., T.P. volte meter, ameter, hour run metre, phase indicating lamps with GMS based, remote start/stop operation call/SMS for feedback regarding running of pumps & breakdown message, timer scheduling for fixed hour in a day, imbuilt protection against overload/ undervoltage, dry run, single phase preventer, inbuilt GPS tracker, phase reversal configurable volt/current limits with a facility to access the systemthrough minimum 10 No. authenticate mobile Nos. complete in all respect, including intire carriage of materials all leads and lifts, installation and testing at site with entire saisfaction of engineer-in-incharge.

Supplying and fixing in position at site of Kirloskar/Kilburn/IVC/Fouress/ GLED/BHEL/Leader/ KSB make of suitable size cast steel double flanged swing check type reflux valve for delivery line of pump having bye pass arrangement and size one size larger than the nominal diameter of delivery size of pump and capable of withstanding nominal delivery size of pump and capable of withstanding nominal seat pressure as mentioned in item No.1 (a) and conforming to BIS/API standards with up to date ammendments for delivery line of pump class-C steel ASA 150,40mm dia.

ROYAL ENGINEERING WORKS

Thakur Traders