Loading…
Loading…
Tender Value
₹8.3 L
EMD Value
₹8,307
Closing Date
23 Jun 2026, 6:00 pmClosed
Municipal Commissioner, Ahmedabad
Maintenance of CI / DI / MS Trunk Mains, Branch Lines of Kotarpur WTP and misc. works in North Zone under Water Project Department.
313904
E-Tender Notice/2026-27, T.No.5
Open
Miscellaneous Works
Works
Ahmedabad
3 documents required · 3 mandatory
₹900
Municipal Commissioner, Ahmedabad
₹8,307
12 Jun 2026
12 Jun 2026
12 Jun 2026
23 Jun 2026
12 Jun 2026
(4) Date of e-Tender (Technical Bid) Opening : Date:- 25/06/2026 at 11.00 hours
Municipal Commissioner
Ahmedabad Municipal Corporation
Sardar Patel Bhavan
Ahmedabad – 380
Gujarat (INDIA)
AHMEDABAD MUNICIPAL CORPORATION
Name of work:- Maintenance of CI / DI / MS Trunk Mains, Branch Lines of Kotarpur
WTP and misc. works in North Zone under Water Project Department.
Quantity Items 3) R & B SOR Amount (in
1 Cost Labour Work
a Unskilled Labours per shift
b Skilled Helper per shift
Fitter/Mason/Gas operator per shift
d Supervisor per shift
e Skilled Welder per shift
2 Cost of Materials
a Providing & Suppying Lead
b Providing & Supplying Jute (Spun Yarn)
c Providing & Supplying M-Seal 100 gm pack
d Providing & Suppying Cement bag
e Providing & Supplying Kapachi + Grit- Aggregates
f Providing & Supplying Sand
g Providing & Fixing Nut Bolt
h Providing & Supplying MS Plate /sheets
i Providing & Supplying MS Pipe /piece
j Providing & Supplying MS Ring flange
k Providing & Supplying MS Blank flange
l Providing & Supplying Rubber Gasket
m S.S. Spindle Rod, any Dia. With threads. (Wt.of
15.00 Finished Material)
n Gun Metal Nut with threads. (Wt.of finished
o Providing & applying Rubber paint
p Structural Steel Work
q Roller assemblies, Pully, Ball, Wire sling.
r S.S. wire Rope
s Wooden float/Rubber ball
3 Providing & Supplying of good quality of
rubber rings for following dia meter.
a Rubber Ring for 400 mm dia pipe
b Rubber Ring for 450 mm dia pipe
c Rubber Ring for 500 mm dia pipe
d Rubber Ring for 600 mm dia pipe
4 Providing & Supplying Air Valve Ball
a 65 mm dia ball
b 90 mm dia ball
c 125 mm dia ball
d 200 mm dia ball
e 250 mm dia ball
5 Providing & Supplying Air Valave Setting Ring
a 50 mm dia ball
b 75 mm dia ball
c 100 mm dia ball
d 150 mm dia ball
e 200 mm dia ball
6 For Welding Joints
a Rent of DG set per shift (With Diesel)
b Rent of Welding machine per shift (With Rods)
c Rent for Grinder machine per shift (With Discs)
d Providing & Supplying Gas Cutting set per shift
e Providing & Supplying LPG Bottle
f Providing & Supplying Oxygen Bottle
7 Rent of Tools & Other Charges
a Rent of Chain pulley block & Tripod per shift
b Rent of de-watering Ele.pump (1.5 to 3 HP) per
c Rent of de-watering pump with fual (1.5 to 3 HP)
25.00 per shift
d Rent for JCB Machine
e Providing & Supplying hydra carne Machine of
5.00 tone capacity on rental basis in case of
emergency situation and break down type work &
also during unavoidable condition 7 as per
instruction of engg.incharge , rate ncludes all
nece. shifting, fuel and operating charges . (No
payment should be allowed for non working
condition of machinery)
f Transportation of machinery to or From site
g Rent for Scaffolding by H frame incl. Khapeda
100.00 (per pair per day)
h Making hole and providing and fixing nipple,
2.00 coupling and end cap(0.5''dia.)
i Electric Demolition Hammer (11-E) per shift
j Cement grouting pump per shift(With Gasket)
8 Providing laying and jointing in true line and level.
U.P.V.C.Pipe(SCH40) for cold water including
fittings as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at
every two metre C/C or shall be concealed as
directed in cluding necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
9 Charges for Water connection by making hole
in CI/DI/MS main line
10 For Masonry & RCC Work
a Carting of Debris for lead from 50 m to 5 Kms. as
20.00 directed.
b Supply cutting, Bending, Binding and placing in
0.25 position steel as per plan and design and as per
ISS 2502 including cost of steel and binding wire
for reservoirs/ structures only including lift up to
meter height or depth below G.L. for all diameters.
Deformed(TMT) bars confirming to relevant IS Fe-
500 grade for all diameters.
c P/F Dead shuttering for slab, beam etc.
d Providing & Supplying Bricks
11 Proving and Fixing F.R.C. Extra Heavy Duty
2.00 (EHD-35) Manhole Covers &Frames Cover :
728mm ø & 100 mm thick circular cover,
MT load design, 100x2mm MS flat allround, 16mm
ø plain round bar for lifting the cover & should be
fitted with plastic cups. Frame : 560 mm ø clear
opening, outer size- 888x888x175 mm. On the
upper periphery of frame 25 x 3 mm wide MS flat
should be well embed in concrete to protect the
edges of frame. FRC E.H.D.-35 manhole cover &
frame described as above. Rate also including
Fixing M.H., Chamber or Catchpite Seat and
Cover in line and level to match exisisting road
level in C.C.1:2:4 and finishing smooth, watering
and protecting for 7 days etc. complete as
directed. 2,125.00 No
12 Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam
specification including premixing the Material with
water at OMC in mechanical mix plant carriage of
mixed Material by tipper to site, laying in uniform
layers in subbase / base course on well prepared
surface and compacting with vibratory roller to
achieve the desired density.
a (A) Supply of WMM
b (B) Laying of WMM
13 Design, Supply, Installation, Testing,
1.00 Commissioning of Bourdon Type Pressure Gauge,
±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304
Case with Bayonet Type Bezel, SS316 L Bourdon
Tube, SS 316 Movement material, Aluminium dial
with black graduation on white background, Micro
Zero adjustable pointer, neoprene gasket, Blow
out disc, shatter proof glass, SS tag plate etc as
per IS 3624..Range 0-6kg/sq.cm - -150 mm dia.
14 To provide Tractor with Hydraulic Trolley, driver
1.00 with fuel, to carryout different works during
day/night for 12 Hrs. Shift. Work shall be carried
out as per the instructions of Engineer In-Charge.
No extra charged shall be paid for night shift.
Estimated Amount without GST Rs.
Signature of Contractor Name Additional City Engineer (Water Project)
Ahmedabad Municipal Corporation
Company’s seal & Date
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Technical bid.pdf
Financial Bid.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .