Periodic Maintenance of Jawalamukhi Dehra Jawali Raja Ka Talab road under AMP 2021-22 for MDR

Amount

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.225kgs. (Zero decimal two two five kilogrammes) per square metre on the prepared Bituminous surfaces cleaned with hydraulic broom as per technical specification clause-503, including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate including octroi, royality, malkana toll tax sale tax and other taxes imposed by the Government.

Providing and laying 30mm (Thirty milimetres) thick compacted thick bituminous concrete with minimum 40-60 TPH (Forty-sixty tonne per hour) hot mix batch / drum type plant with electronic control Grading-II using crushed aggregate 13mm (thirteen milimetres) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity grade thirty) @ 5% (five percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10(eight to ten) tonne capacity or pneumatic type roller of 12-15 (twelve – fifteen tonne) with tyre pressure of atleast 0.56MP’a (zero point five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specifications clause 509 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals. The rate also includes octroi, royality, malkana toll tax, sale tax or other taxes imposed by the Government.

Ravinder Kumar