REPAIR AND MAINTENANCE AREA DRAINAGE PATHWAY FENCING STEEL LADDER AND GATE IN OFFICERS MD ACCN AT CENTRAL ZONE UNDER GE NORTH BINNAGURI

Amount

SCHEDULE A CIVIL WORKS Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Material and labour for precast factorymade specially designed, as approved R.C.C (1:2:4) louvers and jallies of 25 mm thick of size width 0.45 m and height at centre 0.75 m set in cement mortar (1:4) with precast R.C.C. post/frame including preparation of concrete surface and applying two coats of cement base paint over a coat of primer including demolition of existing jallies complete and as directed. Note :- (Precast post/frame shall be measured and paid separately).

Material and labour for precast factorymade, specially designed, as approved for slotted posts/frames for louvers and jallies of any size 0.10m x 0.10m and heigh exc 1.00 m but n exe 1.50 m long embeded in P.C.C. including preparation of concrete surface, applying two coats of cement base paint over a coat of primer complete all as specified and as directed including demolition of existing one.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. Note:- Reinforced if any used in subject item shall be measured and paid separately.

Material and labour for Mild steel deformed or twisted bars (TMT) 8/10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Material and labour for Mild steel deformed or twisted bars (TMT) 5 to 10 mm dia, cut to length, bent to shape required, as in stirrups including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Material and labour for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate ) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in cement mortar 1:4 including applying two coat white wash after preparation ofsurfaces including demolition of old jallies compllete all as specified and directed.

Dismantling of brick works (laid flat or on edge) in channels or drains, laid, bedded, jointed and pointed in any mortar including separating serviceable bricks aside for reuse in the work.

Material and labour for bricks work with Fly ash bricks, laid flat on vertical inclined sides of drains, bedded & jointly in cement mortar (1 : 4) complete all specified and directed.

All as per item No 11.00 here in before but except bricks complete all as specified and directed. Notes :- Servicebale bricks obtained from dismantling shall be reused

Material and labour for brick work with fly ash bricks, laid on edge on top surfaces of drains, bedded & jointly in cement mortar (1 : 4) complete all as specified and directed.

All as per item No 13.00 here in before but except bricks complete all as specified and directed. Notes :- Servicebale bricks obtained from dismantling shall be reused

Material and labour for racking out loose brick work joints as in inside vertical inclined surfaces of bricks drains, laid flat and flush pointed the same in cement mortar (1:4) complete all as dirceted.

M & L for racking out loose brick work joints as in top horizontal surfaces of bricks drains, laid on edges flush pointed in cement mortar (1:4).

Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specifed and directed.

M&L for PCC (1 : 3 : 6) type C-2 with using 40 mm graded stone aggregates as in surface channel and drains complete all as specified and directed.

Material and labour for PCC (1 : 2 : 4) type B-0 with using 12.50 mm graded crushed stone aggregates as in benching / coping complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed mild steel framed work such as stairs (framed) including stringers , trades , landing, balusters , hand rail etc including cleat bracket etc complete conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Cleaning of blockage in storm water or surfaces water drains with necessary excavation inside the drains carefully not exceeding 1.50 m wide & not exc. 1.50m in depth and getting out all silt mixed with earth and other foreign materials from inside the drains .

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( Note :- screed bed shall also deemed to be included in the quoted rate by the contractor and shall not be measured and paid separately).

Demolition of cement concrete of any description and in any position not otherwise specially provided for as in Floors,surface channel etc complete all as specified and as directed.

Material and labour for 60 mm thick Machine pressed precast conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over and including 50 mm thick sand cushion spread and laid levelled in layers complete all as specified.

Material and labour for 75 mm thick plain cement concrete type C2 1:3:6 (with using 40 mm graded stone aggregate) as in sub base for receiving floor finishes complete all as specified as directed.

Dismantling Bricks laid dry in floors including removing of unserviceable bricks from site and keep safe custody serviceable bricks for reuse complete all as specified

Material and labour for brickwork with Fly ash B bricks in brick flooring laid dry on edge to herring-bone pattern or diagonally (Raking or circular cutting, and waste measured separately) complete all as specified.

All as per item No 30 here-in-above but except bricks complete all as directed. Notes :- Servicebale bricks obtained from dismantling shall be reused

SG ENTERPRISE

ANIL ENGINEERING CO

samrat saw mill and joinery workshop

Biswanath Sharma