Building

Name of Work:-Extension of Post Mortom Building at GMERS Civil Hospital Campus,Gandhinagar Dist :- Gandhinagar.

Qty Item of Work In Rupees Unit Amount In Words

Providing and laying controlled cement concrete M.25 Concrete with all lead,

Rupees Five Thousand

including all transportation, pumping, pouring,curing of concrete etc complete

1 16.59 5,998.60 Cum Nine hundred Ninety Eight

including the cost of formwork but excluding the cost of reinforcement for

Paise Sixty Only

reinforced concrete work in M.25 all RCC elements of Column at all floor level

Providing and laying controlled cement concrete M.25 Concrete with all lead,

Rupees Six Thousand

including all transportation, pumping, pouring,curing of concrete etc complete

2 38.51 6,826.42 Cum Eight hundred Twenty Six

including the cost of formwork but excluding the cost of reinforcement for

Paise Forty Two Only

reinforced concrete work in M.25 all RCC elements of RCC wall at all floor level

Providing and laying controlled cement concrete M.30 Concrete with all lead,

including all transportation, pumping, pouring,curing of concrete etc complete Rupees Six Thousand Six

3 59.17 including the cost of formwork but excluding the cost of reinforcement for 6,668.23 Cum hundred Sixty Eight Paise

reinforced concrete work in M.30 all RCC elements of Beam at all floor level Twenty Three Only

Providing and laying controlled cement concrete M.30 Concrete with all lead,

including all transportation, pumping, pouring,curing of concrete etc complete Rupees Six Thousand

4 96.89 including the cost of formwork but excluding the cost of reinforcement for 6,982.22 Cum Nine hundred Eighty Two

reinforced concrete work in M.30 all RCC elements of Slab at all floor level. Paise Twenty Two Only

Providing and laying controlled cement concrete M.30 Concrete with all lead,

including all transportation, pumping, pouring,curing of concrete etc complete Rupees Seven Thousand

5 8.22 including the cost of formwork but excluding the cost of reinforcement for 7,760.96 Cum Seven hundred Sixty Paise

reinforced concrete work in M.30 all RCC elements of Lintel at all floor level Ninety Six Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including Rupees Seventy Seven

bending, binding and placing in position complete, all floor level Paise Twenty Nine Only

Masonary work using Aerated light weight concrete block having crushing

Rupees Four Thousand

strength not less than 35 kg/sqcm for super structure above plinth level upto all

7 169.26 4,598.91 Cum Five hundred Ninety Eight

floor level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per

Paise Ninety One Only

Technical Specification

Qty Item of Work In Rupees Unit Amount In Words

Providing and laying autoclave aerated concrete blocks masonry as per drawing

(Thickness 100 mm to 150 mm for partition wall) in single or multiple layers in

cement mortar 1:4 (1 cement : 4 fine sand)/ block joining mortar of approved

make. Crushing strength of aerated concrete block/ bats shall not be less than

40 KG/sqcm, minimum density in oven dry condition between 650 to

KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k, in true line level and Rupees One Thousand

8 32.16 plumb and cleaning the surface with necessary tool tackles etc. at all floors, all 1,155.77 Sqm One hundred Fifty Five

heights, all depths, all levels (in foundation & Superstructure) and all places Paise Seventy Seven Only

including curing, scaffolding, racking / flush jointing both side etc complete, as

per drawing / specification and approved by architect and as directed by

Engineer - Incharge. For all civil, plumbing, electrical & infrastructure works

Providing 10mm.Thick cement plaster in single coat on ceiling and sofit for

Rupees One hundred

plastering upto any level finished even and smooth in [I]Cement mortar 1:3 (1

9 484.87 135.30 Sqm Thirty Five Paise Thirty

cement : 3 fine sand) Work complete including all type of scaffolding , tools,

tackles etc complete.

Providing 20 mm thick double coat mala cement plaster on interior and external Rupees Two hundred

brick / concrete work for plastering comprising of base coat of 12 mm thick Eighty Six Paise Ten Only

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing

and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding, curing, tools, tackles etc complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of

single or half brick walls/RCC for plastering any level and finished even in Rupees One hundred Sixty

Cement mortar 1:4 (1-cement :4-sand) Work complete including all type of Five Paise Two Only

scaffolding , tools,

Providing and tackles

applying etc complete.

external finish of average 2 to 2.5mm thick acrylic

polymer based texture and pattern with standard tool and applicator as Rupees Three hundred

12 725.82 specified by manufacturer on exterior surfaces at all heights including 301.99 Sqm One Paise Ninety Nine

scaffolding to give even shades including thoroughly brushing the surfaces free Only

from mortar droping and other foreign matter and sand paper smoothed etc.

complete as per the manufacture specifications and up to the satisfaction of

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at

junction of concrete and brick work or between different materials after making

"V" grove between two different material surface and filled with rich cement

Rupees Two hundred

mortar and @ 100mm on each side of surfaces including necessary "U" nails /

13 5.02 232.78 Sqm Thirty Two Paise Seventy

screws / washers with cleats for fixing, overlaps, scaffolding at all floors / all

levels / all heights / all shapes etc. complete as per drawing / specifications and

direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure

Chemical Anchor:

Supplying, Drilling/ Cleaning hole and injecting grouting chemical with the help

of dispenser, into a hole of dia & depth as per manufacturer/ structural

consultant's specification and fixing rebar of the required diameter

subsequently. Fixing methodology shall be followed as per manufacturer’s

Rupees Four hundred

guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar

14 30.00 419.14 Nos Nineteen Paise Fourteen

Depth Calculation based on design loads & other parameters as provided by

consultant and in accordance with EOTA-TR-023/029 “guidelines for post

installed rebar connections” for approval. Rate shall be inclusive of all material,

labour, necessary scaffolding etc complete for all height as directed by engineer

Providing and supplying Medium duty injection adhesive for rebar of approved

make fixing in Dry conditions for below specified dia. Drilling hole to the

required depth by rotary hammer drill, cleaning with brush and jet of clean air,

filling resin and hardener with standard dispenser in hole and then fixing the re-

bar, The system shall be made of two foils consisting of resin and Hardener foil

pack. The installation and the setting instructions shall be strictly followed as Rupees One hundred

15 20.00 per the manufacturers Recommendations. Rate shall be inclusive of scaffolding 130.29 Nos Thirty Paise Twenty Nine

and for all places and all heights etc. and work shall be carried out as per Only

direction of engineer in charge. Reinforcements shall be paid in relevant tender

item. (Pull out testing upto 1% of total rebar is to be produced by manufacturer)

(b) Rebaring 10 mm

Qty Item of Work In Rupees Unit Amount In Words

Providing and supplying Medium duty injection adhesive for rebar of approved

make fixing in Dry conditions for below specified dia. Drilling hole to the

required depth by rotary hammer drill, cleaning with brush and jet of clean air,

filling resin and hardener with standard dispenser in hole and then fixing the re-

bar, The system shall be made of two foils consisting of resin and Hardener foil

pack. The installation and the setting instructions shall be strictly followed as

Rupees Two hundred Six

16 20.00 per the manufacturers Recommendations. Rate shall be inclusive of scaffolding 206.04 Nos

Paise Four Only

and for all places and all heights etc. and work shall be carried out as per

direction of engineer in charge. Reinforcements shall be paid in relevant tender

item. (Pull out testing upto 1% of total rebar is to be produced by manufacturer)

(c) Rebaring 12 mm

Qty Item of Work In Rupees Unit Amount In Words

Toilet and wet area waterproofing

Providing and applying Two-part acrylic polymer modified cementitious

elastomeric waterproof coating having minimum 1 N/mm2 tensile strength, at

minimum 1.5mm thickness DFT, and shall cover 2.2 kg / sqm. The coating shall

have an elongation of a minimum of 80% when tested as per ASTM D

resisting 5 bars hydrostatic pressure as per DIN 1048 and having crack bridging

ability of up to 2mm. Thorough surface preparation by mechanical means to

level and plain the surface of walls and floors of the toilet areas. All cracks and

crevices to filled and made good to receive waterproofing coating treatment

The coating shall cover all the floor area of the wet area (toilet) and be applied

over on to the vertical walls for a height of 4 feet above the floor. The periphery

of the toilet floor shall be additionally reinforced with an extra third coat of the

coating with a fiber band sandwiched between the first and the second coat, Rupees Seven hundred

17 22.50 which shall also done around protrusions (pipes) meant for plumbing purpose. 791.84 Sqm Ninety One Paise Eighty

The last coat when wet, shall be sprinkled with clean and washed sand, to Four Only

facilitate the floor screed or plaster.

Pipes being fixed for plumbing shall be fixed in holes which are mechanically

core cut, more than the dia of the pipes. Pipes shall be fixed by grouting the

annular space with non-shrink cementitious grout of proprietary make. Before

grouting the pipes shall be wrapped with a two-way self adhesive tape at least

inches wide and then grouted to fill in the grout, ensuring total watertight

plumbing fittings. Contractor shall submit methodology statement with all detail

in illustrative sketch form and get approved from Engineer in charge.

Application shall be carried out by approved applicator of manufacture and as

per recommended by manufacturer. Applied area of cementitious elastomeric

coating (horizontal and vertical) shall be measured for payment.

Qty Item of Work In Rupees Unit Amount In Words

Providing and applying hydrophilic crystalline based waterproofing for Terrace,

Balcony, Toilet with system In two coat application. The application to be done

from + ve (positive) side on a wet open pore green concrete surface at coverage

of 0.8 to 1 Kg/Sqmt as per manufacturer specification. It shall be hydrophilic in

nature, shall be able to grow crystals year after year to seal microcracks.The Rupees Three hundred

18 464.86 product shall confirm to DIN 1048 part 5 and shall provide in depth 343.40 Sqm Forty Three Paise Forty

crystallization. The product technology shall be CPWD and EIL approved. Only

Application shall be done on wet surface after 3-6 hours of casting of concrete.

The material and application warranty to be given by manufacturer’s authorized

distributor / applicator on prescribed format.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

Rupees Seven hundred

slope and to be tempered to bring mortar creme out upto surface using white

19 464.86 779.70 Sqm Seventy Nine Paise

cement including rounding off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as directed.

Water proof plaster : Providing 15 mm thick water proof cement plaster in

single coat on brick/ block masonry or RCC wall, at all heights, finished even and

smooth in CM 1:3 (1 cement : 3 sand) including providing and mixing water Rupees One hundred

20 597.96 proofing materials of approved make in recommended proportions by 193.70 Sqm Ninety Three Paise

manufacturer and as directed by Engineer-in-charge and finishing the surface Seventy Only

wired finish to receive the tiles/ smooth finish with a floating coat of neat

cement slurry at 2.75 Kg/ sqm etc. complete at floor

Vitrified Flooring : Providing and laying Lapato / Glossy/Matt/Rustic finish

Vitrified tiles flooring using minimum 10 mm thick tiles as per approved make

list or selected by Architect , tile size (1200 mm X 600 mm, 800 x 800,900 x900,)

including preparing base for leveling with 20mm thick cement mortar 1:6 (1 Rupees One Thousand

21 416.97 cement : 6 coarse sand ) and jointed with 3mm thick laticrete grouting of 1,922.00 Sqm Nine hundred Twenty Two

approved shade and colour in proper line and level as per detailed drawing / Only

instruction and approval by architect.The rate shall be inclusive of protecting

the flooring by plaster of Paris and plastic and/or bubble top sheets.

Qty Item of Work In Rupees Unit Amount In Words

Providing and laying Lapato/ Matt /Glossy/ Non skid,/Rustic finish Vitrified

tiles in dado using minimum 10 mm thick tiles approved by architect /client

(size 600 mm X600mm) fixed in skrting risers of steps and dedo on 10 mm th.

Cement plaster 1:3 (1 cement: 3 coarse sand) All surfaces must be dimensionally

stable according to IS 1443-1972, level, cured, undamaged,

compact,rigid,resistant, dry and free from any debonding agents tiles fixed by Rupees One Thousand

22 613.74 approved tile adhesive and all application shall be done under instruction of 1,568.37 Sqm Five hundred Sixty Eight

manufacturer guideline and specification , and jointed with 3mm thick epoxy Paise Thirty Seven Only

grouting laticrete or equivalent approved make of approved shade and colour

in proper line and level as per detailed drawing / instruction all complete as per

approved sample by Architect, drawings and instruction of EIC. at all floors / all

levels / all heights and all shapes .

Providing and laying Granite slab (16 to 18 mm thick) one side polished flooring

over 20 mm (average) base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or Rupees Two Thousand

23 50.00 L.M. 1:1.5 laid and jointed with grey cement slurry including rubbing & polishing 2,180.03 Sqm One hundred Eighty Paise

complete, The work shall be carried out as per the approval of architect and Three Only

engineer-in-charge. for all floors

Providing and laying 16 to18 mm thick polished Granite stone slab machine

cut in single piece in risers of steps, dedo, pillar, sill and jambs or dedo laid on

10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid over and

Rupees Two Thousand

jointed withgrey cement slurry incl. rubbing and polishing etc complete. The

24 20.00 2,583.39 Sqm Five hundred Eighty Three

rate includes lodding, unlodding, scaffolding, wastage, making hole, cutting/

Paise Thirty Nine Only

chasing, rounding champhering, edge polishing of edges. The work shall be

carried out as per the approval of architect and engineer-in-charge. for all floors

Gypsum Ceiling : Providing and fixing single layer water proof gypsum board

12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x

8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to

center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and Rupees Six hundred Six

perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops Paise Ninety Five Only

incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl. making necy. opening for light

fitting,diffuser etc. comp. as per detail drawing as directed.

Qty Item of Work In Rupees Unit Amount In Words

False ceiling : Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Rupees One Thousand Six

26 13.50 Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall 1,674.15 Sqm hundred Seventy Four

have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% Paise Fifteen Only

Flush Door resistance

With WPCandframe

also having thermal

(50X150 mm) :conductivity0.043°

Providing and fixingw/m KC.for the

35mm thick solid core wooden flush doors of approved make having fire

retardant ply facing on both sides and finished with 1.5 mm thick laminate as

approved , Hardware system of Geze/Kich/Dorma or equivalent like ( Hinges , Rupees Five Thousand

27 10.40 Boxer type door closer , Door handle , Euro profile , lock , Door stop ) . work 5,021.73 Sqm Twenty One Paise Seventy

complete including all type of hardware, fittings , fixtures etc complete as per Three Only

detailed drawings and specifications. sample mock shall be approved from

Employer's representative/ Employer.

Flush Door with frame and finish with 1mm thick Laminate (35MM): Providing

and fixing in position 35 mm thick solid core wooden flush doors of approved

make having fire retardant ply facing on both sides and finished with 1mm thick

Rupees Three Thousand

laminate as approved ,frame size - 200 X100 MM, Hardware system of

28 15.12 3,513.04 Sqm Five hundred Thirteen

Geze/Kich/Dorma or equivalent like Hinges , Boxer type door closer , Door

Paise Four Only

handle , Euro profile , lock ,Door stop . work complete including all type of

hardware, fittings , fixtures etc complete as per detailed drawings and

specifications.

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Rupees One Thousand

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt

29 19.03 1,583.95 Sqm Five hundred Eighty Three

with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Paise Ninety Five Only

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

Providing and fixing standared extruded of alluminium section of size 63mm x

Rupees One Thousand

38.10mm x 1.2mm (Jindal Section:2434, @ Wt. 0.643 Kg/mt) with colour

30 7.91 1,175.56 Sqm One hundred Seventy Five

Powder Coated alluminium frame for ventilation with 5mm thick frosted glass

Paise Fifty Six Only

as details etc complete for Ventilation

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square or Rupees One hundred Six

round bars with round headed bolts and nuts or by screws (A) Plain Grill. Paise Twenty Three Only

Providing and fixing powder coated (powder coating not less than 40 microns)

non vision extruded aluminium "Air Transfer Grill” of required sizes to be fixed

Rupees Nine Thousand

in the opening made in the laminated/ non decorative flush door shutters. The

Seven hundred Twenty

32 26.94 grill shall be 1.20 mm thick, in approved size, shade, and pattern, shape, as per 9,729.71 Sqm

Nine Paise Seventy One

the drawing and as per directions of Engineer - in - charge. Rate shall be

inclusive of cutting the door as per approved grill size, providing and fixing

required depth of lipping on the cutting edges of flush door shutter with

Aluminium airmesh

Bird transfer grill shall be of double frame and fixed flush with the

Providing and fixing in position Aluminium - 25 x 25 mesh of 14gauge Bird mesh

having colour anodizing of approximate 30 micron thickness/ polyster powder

coating of min 50 micron thickness of approved make and shade in balcony with Rupees Five hundred

33 26.94 aluminium framing sections as per approved shop drawing and as approved by 575.34 Sqm Seventy Five Paise Thirty

Architect and Engineer-in-charge, at all floors, all levels, all heights. Mesh shall Four Only

be fixed with necessary fixing EPDM quality rubber gasket, fastener, silicon

sealant etc complete. Clear area of bird mesh shall be measured and paid in

Sqm with out considering any wastage. All aluminum sections for framing shall

Providing and fixing in position SS 304 - 18 x 16 mesh and 32 gauge mosquito

net having 50 micron pure polyster powder coating of approved make and

shade for aluminium sliding shutter/ fixed shutter or in front of aluminium

louvers of any size any shape as per shop drawing prepared by contractor and

Rupees Six hundred

sample as approved by Architect. Jali shall be fixed with SS304 grade screws

34 26.94 619.20 Sqm Nineteen Paise Twenty

and fasteners required to tighten the Jali/ Net including micro wave cured

EPDM / silicon sealant/ structural sealant etc complete for all floors, all levels,

all heights. Only installed area of mosquito net shall be measured and paid in

Sqm without considering any westage. All aluminium sections shall be paid

under relevant tender item.

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing 6mm thick clear toughen glass as per approved sample of

any size, any shape and specified thickness in frame and shutter work with

necessary cutting of glass as per drawing & specifications including providing

and fixing microwave cured EPDM gasket/ silicon sealant/ structural sealant and Rupees One Thousand

35 20.00 3M tape on the periphery of the glass as per the required thickness etc. 1,406.93 Sqm Four hundred Six Paise

complete at all floors/ all levels/ all heights as per the directions of Architect. Ninety Three Only

Actual installed quantity shall be measured and paid. Rate shall be inclusive of

all type of wastage.

Providing and fixing 8mm thick clear toughen glass as per approved sample of

any size, any shape and specified thickness in frame and shutter work with

necessary cutting of glass as per drawing & specifications including providing

and fixing microwave cured EPDM gasket/ silicon sealant/ structural sealant and Rupees One Thousand Six

36 10.00 3M tape on the periphery of the glass as per the required thickness etc. 1,697.81 Sqm hundred Ninety Seven

complete at all floors/ all levels/ all heights as per the directions of Architect. Paise Eighty One Only

Actual installed quantity shall be measured and paid. Rate shall be inclusive of

all type of wastage.

Providing and fixing 12mm thick clear toughen glass as per approved sample of

any size, any shape and specified thickness in frame and shutter work with

necessary cutting of glass as per drawing & specifications including providing

Rupees Two Thousand Six

and fixing microwave cured EPDM gasket/ silicon sealant/ structural sealant and

37 10.00 2,687.61 Sqm hundred Eighty Seven

3M tape on the periphery of the glass as per the required thickness etc.

Paise Sixty One Only

complete at all floors/ all levels/ all heights as per the directions of Architect.

Actual installed quantity shall be measured and paid. Rate shall be inclusive of

all type of wastage.

Providing and fixing in position PVC Frosting Glass film of approved make (of any

pattern, shade and type) on glass partitions and doors for internal use. Film

Rupees Nine hundred

shall be pasted on glass without any appearing any air bubble. The rates shall be

38 5.00 939.30 Sqm Thirty Nine Paise Thirty

for all shapes and all heights with necessary scaffolding complete as per the

Architectural drawings and manufacturer's specification & instructions as

directed by the Engineer-in-charge. Film shall be with 10 years warranty.

Extra for process charges of Frosting the glass of any thickness in any pattern as Rupees Two hundred

directed by engineer in charge. Ninety Four Paise Ninety

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing 6mm thick Compact Sheet (both side same finish) of any

color, any texture, any finish as per approved sample (approved by architect) in

aluminium frame and shutter work with necessary cutting of sheet in any size,

any shape, as per drawing including providing and fixing microwave cured EPDM

gasket/ silicon sealant/ adhesive tape/ screwing on the periphery of the sheet Rupees One Thousand Six

40 20.00 etc. complete at all floors/ all levels/ all heights as per the drawing & directed by 1,637.21 Sqm hundred Thirty Seven

Engineer in charge. / Architect. Cut edges of the compact sheet shall be Paise Twenty One Only

provided with masking tape. Actual installed quantity shall be measured and

paid without wastage. Aluminium framing work shall be paid in relevant tender

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly Rupees Forty Paise Fifty

brushing the surface free from mortar dropping and other foreign matter and Nine Only

sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including Rupees Eighty Three

throughly brushing the surface free from mortar droppings and other foreign Paise Eighteen Only

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

Rupees One hundred

coats) to give an required shape even shade after thoroughly brushing the

43 726.00 120.26 Sqm Twenty Paise Twenty Six

surface to remove all dirt, and remains of loose powdered materials. etc

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil, grease, dirt and other

Rupees Thirty Six Paise

44 193.66 for eign matter and scoured with brushes fine steel wood, scraper sands and 36.42 Sqm

paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel Paint, brushing, interior to give an even shade including Rupees Ninety Two Paise

cleaning the surface an even shade including cleanicn the surface of all dirt, dust Twenty Only

and other foreign matter.

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and Rupees Eight Thousand

46 6.00 joists, channels angles Tees, flats, with connecting plates or angle cleats as in 8,837.50 Qui. Eight hundred Thirty Seven

main and cross beams. Hip and jack rafters, purlins conneted to common rafters Paise Fifty Only

Qty Item of Work In Rupees Unit Amount In Words

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed before Rupees One hundred

laying. Open ends of the pipe shall be closed as the pipe is installed to avoid Sixteen Paise Fifteen Only

clogging while concreting. Rate shall be inclusive of removal of sleeves before

water proofing or grouting. For all floors / all levels / all heights. (a) 50mm

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed before Rupees One hundred

48 10.00 laying. Open ends of the pipe shall be closed as the pipe is installed to avoid 185.84 Rmt Eighty Five Paise Eighty

clogging while concreting. Rate shall be inclusive of removal of sleeves before Four Only

water proofing or grouting. For all floors / all levels / all heights. (a) 75mm

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed before Rupees Three hundred

49 10.00 laying. Open ends of the pipe shall be closed as the pipe is installed to avoid 319.41 Rmt Nineteen Paise Forty One

clogging while concreting. Rate shall be inclusive of removal of sleeves before Only

water proofing or grouting. For all floors / all levels / all heights. (a) 110mm

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed before Rupees Four hundred

50 10.00 laying. Open ends of the pipe shall be closed as the pipe is installed to avoid 499.45 Rmt Ninety Nine Paise Forty

clogging while concreting. Rate shall be inclusive of removal of sleeves before Five Only

water proofing or grouting. For all floors / all levels / all heights. (a) 160mm

Qty Item of Work In Rupees Unit Amount In Words

Core cutting : Providing and wet drilling accurate and clean holes of specified

diameter in RCC walls, slabs, beam or any other RCC member without vibration

by core cutting (diamond drilling) machine including scafolding, safety majors,

disposing the debris, cleaning for all levels/ all height as per structural Rupees One Thousand

51 10.00 consultant's drawing, after approval of engineer in charge etc compete. Rate 1,126.66 Nos One hundred Twenty Six

shall be inclusive of filling the hole with non shrink grout/Chemical Anchoring in Paise Sixty Six Only

good manner. Measurement shall be taken for the depth of holes in running

meter for specified diameter. Holes shall made by authorised approved agency.

(a) holes from 100 dia.

Core cutting : Providing and wet drilling accurate and clean holes of specified

diameter in RCC walls, slabs, beam or any other RCC member without vibration

by core cutting (diamond drilling) machine including scafolding, safety majors,

Rupees One Thousand

disposing the debris, cleaning for all levels/ all height as per structural

52 10.00 1,463.49 Nos Four hundred Sixty Three

consultant's drawing, after approval of engineer in charge etc compete. Rate

Paise Forty Nine Only

shall be inclusive of filling the hole with non shrink grout//Chemical Anchoring

in good manner. Measurement shall be taken for the depth of holes in running

meter for specified diameter. Holes shall made by authorised approved agency.

Providing 150 dia.

and fixing SS 304 grade brush finish 1.5mm thick Internal signage of

any shape any size with letter, numbers, graphic, symbol etc made by etching

with duco paint/ laser print or vinyle sticker with lamination of approved shade.

All signage plates shall be made in CNC water jet cutting, with all smoothen

Rupees Two hundred Sixty

edges and cute round corner. Signage matter shall be as per drawing. The plate

53 100.00 265.73 Sqcm Five Paise Seventy Three

shall be fixed on any surface with the necessary fixing like stud, fastner, self

adhesive or adhesive etc complete for all floor all height and as directed by

Engineer in charge. The rate shall be inclusive of all material, laour, scaffolding

etc. at all heights.

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing SS 304 grade brush finish 1.5mm thick Internal signage of

any shape any size with letter, numbers, graphic, symbol etc made by etching

with duco paint/ laser print or vinyle sticker with lamination of approved shade.

All signage plates shall be made in CNC water jet cutting, with all smoothen Rupees Nineteen

edges and cute round corner. Signage matter shall be as per drawing. The plate Thousand Eight hundred

shall be fixed on any surface with the necessary fixing like stud, fastner, self Fifteen Paise Nineteen

adhesive or adhesive etc complete for all floor all height and as directed by Only

Engineer in charge. The rate shall be inclusive of all material, laour, scaffolding

etc. at all heights.

Providing and fixing satin/ brush finish SS 304 grade 1.2 mm thick kick plate of

required size disable toilet door/ kitchen door as drawing of approved make

including fixing with necessary material like adhesive, adhesive tape, SS screws Rupees Seventeen Paise

etc complete as directed by engineer in charge. Kick plate have round corner Sixty Five Only

and grinded edges and as per sample approved by Architect.

Providing and fixing non fire rated hollow metal doors made of pressed

galvanized steel confirming to IS 277 with the following specification. Door

frame shall be single rebate grooved profile of size 100 x 57mm made of

minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be Rupees Twelve Thousand

mitred, and field assembled with self-tabs. Frames to have inbuild grooved Seven hundred Seventy

56 4.00 sealing system and shall be site fitted with PVC seal as standard. All provision 12,773.98 Sqm

Three Paise Ninety Eight

shall be mortised, drilled, and tapped for receiving appropriate hardware. Only

Frames shall be provided with back plate bracket and anchor fasteners for

installation on surface of opening. Frames shall be filled with puff. Door leaf

shall be 46mm thick fully flush double skin door, with or without vision lite.

Directleaf shall Out

Bought be manufactured from

Item : Providing andminimum

placing in0.8mm (22guage)

position SS brushthick

Rupees One Thousand

LTS PEDAL BIN/ STEP BIN -) of Kich , Dorma ,etc Square Pedal bin 10x15

57 4.00 1,184.73 Each One hundred Eighty Four

Stainless Steel Dustbin or Equivalent as per images and as selected by the

Paise Seventy Three Only

Providing & placing in position DIGITAL CLOCK - WALL MOUNTED as per Rupees Two Thousand

58 2.00 architect selection Ajanta Digital Wall Clock(Brown, Black, With Glass) 2,079.09 Nos Seventy Nine Paise Nine

Qty Item of Work In Rupees Unit Amount In Words

PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of

various Bathroom C.P. Fixtures with hydraulic testing complete as per design, Rupees One Thousand

59 4.00 drawing and instruction of site incharge. 25mm Dia Control Valve (Make: 1,451.88 Nos Four hundred Fifty One

Zoloto, VB,SANT or equivalent) Paise Eighty Eight Only

Providing and fixing screw down bib taps of following size. (B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia. Jaquare Opal Prime OPP 15037PM Rupees Two Thousand

(Make :- Jaquar, Hindware , Parryware or Equivalent). Paise Ten Only

Providing and fixing health faucet with 1 m PVC tube and swivel hook including Rupees One Thousand

61 4.00 all fittings complete. (Jaquare Code : ALD-573)(Make :- Jaquar, Hindware , 1,585.45 Nos Five hundred Eighty Five

Parryware or Equivalent). Paise Forty Five Only

Providing and fixing white glazed vitreous china wall mounting type (European

type) water closet with C.P. bolts, nuts, C.I. Chair or other hanging arrangement,

white solid plastic seat with lid, C.P. brass hinges and rubber buffers, Metropole

Rupees Twelve Thousand

flush valve reguler 40mm size (concealed body) with exposed shut off provision

62 4.00 12,063.95 Nos Sixty Three Paise Ninety

, C.P. brass screws and washers complete, including cutting and making good

the walls floors where required. Wall hung EWC (Jaquare - VGS-WHT-81953UF),

(FLV-1093N - Metropole Flush Valve) & (FLV-1071 - Concealed Flush Valve

Complete) matching white plastic seat with lid & CP brass hinges & CP push

Providing and:-fixing

Jaquar, Hindware

White glazed ,vitreous

Washor Equivalent).

Basin Round Over-Counter, size

450 mm dia., with supporting in stone flooring, 1 no, 32 mm CP Bottle trap with

Rupees Five Thousand

extension piece to wall flange with rubber adopter for waste connection,1.2m

63 4.00 5,819.81 Nos Eight hundred Nineteen

Flexible Pipe [1No] and waste coupling. Etc complete. Wash Basin Table Top -

Paise Eighty One Only

420x420x155 mm (CNS-WHT-905) (Make : Jaquar, Hindware, Cera, Somani or

Providing & fixing in position 15 mm C.P. brass angle cock of best quality with

Rupees Two Thousand

1.2 Rmt Long pvc Tube and accessories with necessary fittings etc. complete.

64 8.00 2,073.28 Nos Seventy Three Paise

(CODE : FLR-5053N) (Make: Jaquare, Cera, Hindware, Somani or Equivalent)

Twenty Eight Only

Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with Rupees One Thousand

65 4.00 necessary fittings etc. complete.[Jaquar FLR - CHR-5011N or Equivalent) 1,751.75 Nos Seven hundred Fifty One

Paise Seventy Five Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -100 mm diameter

Rupees Five hundred

with jail of the following nominal diameter of self cleaning design wit c.I scread

66 8.00 599.64 Nos Ninety Nine Paise Sixty

down or hinged grating including the cost of cutting and making good the wall.

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing TOWEL RING SQUARE , as approved by the architect.Work

complete including all type of fittings , etc complete as per suggestion of Rupees Nine hundred

67 4.00 Architect/EIC. ( Code : ACN-1121BN) (Make: Jaquare, Cera, Hindware, Somani 974.01 Nos Seventy Four Paise One

or Equivalent) Only

Providing and fixing SOAP DISH HOLDER as approved by the architect.Work

complete including all type of fittings , etc complete as per suggestion of Rupees One Thousand

68 4.00 Architect/EIC. (Code : ACN-1135N) (Make: Jaquare, Cera, Hindware, Somani or 1,344.74 Nos Three hundred Forty Four

Equivalent) Paise Seventy Four Only

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass

Rupees Eight hundred

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge

69 4.00 859.41 Each Fifty Nine Paise Forty One

with C.P. brass screws and washers.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) Rupees Two hundred

100mm dia. Each. Eighty Two Paise Sixteen

Providing erecting and fixing double coated ISI water tank of required capacity

Rupees Three Paise

71 2000.00 each with all necessary fittings and connection etc. complete on terrace 3.95 Litre

Ninety Five Only

Sub - Estimate -01 ( Civil Interior, Plumbing Fixure)

Suppy, Installation, Testing and Commisioning of 6 body mortuary cabinate of

approx. Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -

304 grade sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer

Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C,

Door: Overlap type door with heavy duty hinges & Handles with closer along

with push type gasket for easy operation Size: 32” X 32”, Lock SS: Individual lock Rupees Five Lakh Ninety

& Key for each door, Identification: Each Window should be facilitated for Body thousand Only

Identification tag (replaceable),Vapor proof lights, Refrigeration System: Air

Cooled, Split Type and Capable to run at minimum 45 deg C Ambient with CFC

free refrigerant gas R407C/R404A for low maintenance. Compressor Type :

Hermetic reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper

fins type Indoor Unit with SS casing capable to maintain low relative

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved,

Qty Item of Work In Rupees Unit Amount In Words

Suppy, Installation, Testing and Commisioning of 4 body mortuary cabinate of

approx. Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -

304 grade sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer

Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C,

Door: Overlap type door with heavy duty hinges & Handles with closer along

with push type gasket for easy operation Size: 32” X 32”, Lock SS: Individual lock Rupees Four Lakh Ninety

73 1.00 & Key for each door, Identification: Each Window should be facilitated for Body 4,90,000.00 Nos.

Identification tag (replaceable),Vapor proof lights, Refrigeration System: Air

Cooled, Split Type and Capable to run at minimum 45 deg C Ambient with CFC

free refrigerant gas R407C/R404A for low maintenance. Compressor Type :

Hermetic reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper

fins type Indoor Unit with SS casing capable to maintain low relative

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved,

Point wiring for3 Light

Hz, Temperature achievement

with 2-1.5 sq.mm & earthand retention

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Rupees Six hundred

74 35.00 Modular type switch / bell push & accessories and earth continuity of following 616.10 Pt.

Sixteen Paise Ten Only

type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

Point wiring foras directed.(f)

FAN with 2-1.5with medium

sq.mm classwire

1.5 sq.mm accessories

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

Rupees Six hundred

accessories with earth continuity of following type erected on PVC /

75 10.00 674.68 Pt. Seventy Four Paise Sixty

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat III

Qty Item of Work In Rupees Unit Amount In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with Rupees Eight hundred

76 2.00 appropriate front plate modules erected on / in wall / ceiling as per pipe erected 871.63 Pt. Seventy One Paise Sixty

with following type of accessories.[III] For 16A Plug and 16 amp switch with 2-4 Three Only

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.(f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Two hundred Fifty

covered with textured / metallic/white front plate modules erected on / in Seven Paise Fifty Five Only

wall / ceiling with following type accessories Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be Rupees One hundred

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Twelve Paise Eleven Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load Rupees Two hundred

79 5.00 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 299.97 Ea. Ninety Nine Paise Ninety

having following capacity (A) 6 to 32 Amp. Seven Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Six hundred Sixty

80 10.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 668.62 Ea.

Eight Paise Sixty Two Only

having following capacity (b)40 Amp. Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

Rupees Eight Thousand

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

81 1.00 8,055.76 Ea. Fifty Five Paise Seventy Six

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. Rupees Fifty Two Paise

MCB Fifty Two Only

Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. Rupees One hundred

MCB Eight Paise Seven Only

Qty Item of Work In Rupees Unit Amount In Words

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Rupees Three Thousand

84 1.00 nos. of MCBs.(The DBs should be used of same company of MCB to be used) 3,874.36 Ea. Eight hundred Seventy

suitable for(B) three phase incoming and single phase horizontal type outgoing Four Paise Thirty Six Only

Per phase isolation type (PPI)(b) sheet steel double door(iv)12 way

Providing and erecting Sheet Steel powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted double door (IP54) fitted with copper

insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS Rupees Eight Thousand

85 1.00 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB as 8,402.19 Ea. Four hundred Two Paise

incomer and three phase outgoing as per following .(The DBs should be used of Nineteen Only

same company of MCB to be used) (C)8 way outgoing

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

Rupees One Thousand

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

86 1.00 1,969.50 Ea. Nine hundred Sixty Nine

action & tripping with all advance feature & do not incorporate any electronic

Paise Fifty Only

component. for following Max. rating erected as directed (i) 25 Amps.DP Cat III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

Rupees Two Thousand

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

87 2.00 2,235.13 Ea. Two hundred Thirty Five

action & tripping with all advance feature & do not incorporate any electronic

Paise Thirteen Only

component. for following Max. rating erected as directed (i) 40 Amps.DP Cat III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees Five hundred Ten

existing trench / pipe at road crossing or floor of following size of cables.(C) 4 Paise Five Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees Six hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

89 250.00 676.70 Mtr. Seventy Six Paise Seventy

existing trench / pipe at road crossing or floor of following size of cables.(A)

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Rupees One Thousand

90 20.00 sweep complete having 3blades with aluminium blades with , canopy & 30 cm. 1,948.29 Ea. Nine hundred Forty Eight

down rod erected with earthing.(Make shall be approved by Engineer in Paise Twenty Nine Only

Supplying & erecting single phase approved make industrial exhaust fan suitable

Rupees Two Thousand

for medium duty ring mounted low noise operation suitable for medium duty

91 6.00 2,054.34 Ea. Fifty Four Paise Thirty

having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Sixty Two Paise

PVC insulated stranded wire of green colour for earth continuity of following Sixty Two Only

size (A) With medium class Rigid PVC pipe and accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Eighty Two Paise

PVC insulated stranded wire of green colour for earth continuity of following Eighty Two Only

size (A) With medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded Rupees One hundred

wire of green colour for earth continuity of following size(A) with medium class Twelve Paise Eleven Only

Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

Rupees One Thousand

textured/metallic /white front plate,modules erected with necessary

95 5.00 1,133.22 Ea. One hundred Thirty Three

connections as directed

Paise Twenty Two Only

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat III

Qty Item of Work In Rupees Unit Amount In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Rupees Five hundred

96 80.00 Luminaire efficacy> 85 lumens/watt ,LED 535.30 Ea. Thirty Five Paise Thirty

LED driver efficiency > 85 % Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(v) 36-40 Watts, Surge-

2 KV, IP-20, conventional 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Rupees One Thousand

Luminaire efficacy> 85 lumens/watt , Seven hundred Ninety

97 100.00 LED driver efficiency > 85 % 1,794.77 Ea.

Four Paise Seventy Seven

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B) LED Panel Light with

provision for Plane front frame with translucent cover fixed to housing

complete.IP20(vi) 36 watts, 24" x 24", Surge- 2KV Cat III

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 Rupees Seven Thousand

98 8.00 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 7,095.25 Ea. Ninety Five Paise Twenty

Micron galvanising, connection terminal dia of 14 mm with constant ohmic Five Only

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

Qty Item of Work In Rupees Unit Amount In Words

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

Rupees Forty Seven

separately erected evaporating unit and blower motor with its accessories by

Thousand One hundred

99 2.00 means of extra supplied proper insulated copper tubing,drain PVC pipes 47,125.12 Ea.

Twenty Five Paise Twelve

suitable for ( cost includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting. (1)For ISEER Range

(KWH/KWH)(3.1 to 3.99)(B) for 1.5 ton capacity

Supplying and erecting insulated pair of soft copper tubing open or concealed Rupees Nine hundred

100 25.00 including power and control cable,necessary PVC drain pipes for Split AC 965.56 Mtr. Sixty Five Paise Fifty Six

machine up to 4 TR capacity Only

Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene rubber gaskets,

Rupees One Thousand

elbows, splitter dampers, vanes, hangers, supports etc. as per approved Sq.M

101 80.00 1,308.96 Three hundred Eight Paise

drawings and specifications of following sheet thickness complete as tr

Ninety Six Only

required.(A) Thickness 0.63 mm sheet (22 Gauge)

Supplying & fixing of powder coated extruded aluminium Return Air Grills with

Rupees Seven Thousand

louvers but without volume control dampers complete as per specifications and Sq.M

102 2.00 7,073.03 Seventy Three Paise Three

size & shape as per site requirement and approved design. tr

Inline Type Exhaust Air Fan

Supply, Installation, Testing & Commissioning of Circular Inline Type Exhaust Air

Rupees Sixteen Thousand

Fan complete with MS zinc sprayed / powder coated Fan with motor for

103 3.00 16,647.83 Ea. Six hundred Forty Seven

maximum speed duty point of Specified CFM and Static pressure , complete

Paise Eighty Three Only

with drive package as per Fan Schedule and Specification.

800 CFM / 15 MM ESP

Qty Item of Work In Rupees Unit Amount In Words

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase

440 V A. C. Permanent Magnet Synchronous motor of proper rating with high

efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control

drive with encoder feedback closed loop system shall be used for lift car and

door operation which shall be full collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls. [3] Car with M S platform with bracings

of adequate size and to sustain the impact load cabin + passenger with safety

factor of fire for steel and side panels of Stainless steel of sheet of grade

duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of s/s 304 chaker plate design sugeested of engineer

in charge. of engineer in charge. Car doors shall be of stainless steel grade 304, Rupees Eighteen Lakh

hairline finish with centre opening / telescopic automatic doors. Car panel will Eighty Four thousand Four

also be S.S. 304 finished with emergency stop device, mechanical door safety

hundred Forty Paise Eighty

device, facility of auto/ attended mode. All car panel buttons and all floor Three Only

switches must be with brail language as per lift act. [4] All landing doors must be

fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening

made of hairline finish steel grade of 304 with key holes and infrared curtains

with Unlocking facility from outside [5] Appropriate battery operated

emergency light in the car along with alarm switch shall be provided. Also,

Emergency Light & Fan should start immediately without any Time Delay as

soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all

floors. [10] Spring buffers/PU Buffers shall be provided.

Qty Item of Work In Rupees Unit Amount In Words

[11] Car fan as per passenger capacity with automatic sleep timer shall be

provided. [12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be

provided in control panel. [14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of calibration

certificate submission, door key holes in the floor doors, fireman switch shall be

provided. [15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along with the

other steel structure works, foundations for the machine etc. [16] In the hoist

way fascia plate shall be provided without any extra cost, where ever required

as / if directed by engineer in charge. [17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under Voltage protection

and THD eliminator in circuit for lift machine room and lift well with proper

numbers of light points, with fixtures, exhaust fan and plug points shall be -

provided by the agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift Act/Rules shall

be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any

extra cost. (granite/marble fixing around all landing door openings are not in lift

104 1.00 agency’s scope.) [19] Agency has to provide all working drawings and 18,84,440.83 Each

documents and liaison services for obtaining all necessary permission from lift

inspector and other authorities. [20] acrylic transparent licence/display A4 size

holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift &

escalator act 2000, lift agency has to provide

Qty Item of Work In Rupees Unit Amount In Words

1. Car top safety barricade 2. Push & talk communication system. 3. Fireman's

switch operation at Ground Floor . 4.carrying out third party lift inspection

during/after lift erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for the

same.[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act

2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk

communication system. [21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly visible when view from

inside cabin. [22] For Physically Handicapped person Full Length Handrails of

hairline finish steel grade of 304 should be provided at appropriate height on

the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage

controlled Stabilizer suitable for your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work -

which rating is sugested by CEICED Department (electrical Inspector)

Fireman's switch operation at Ground Floor. 4.carrying out third party lift

inspection during/after lift erection and provide report by third party

authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the

document for the same. (B) SPECIAL FEATURES DESCRIPTION OF LIFTS for

PREMIUM category 1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming facility, Anti

nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring

system having necessary connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the purpose

Qty Item of Work In Rupees Unit Amount In Words

2. Floor Indication LCD Display with call registration & brail mark with arrival

gong and hall lantern & TFT Screen in the car with MP3 Voice Announcer.3. CAR

Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must have fire rating up to 2 hours and

car door must have multi-level crisscross beam door protection. 4. To & fro

communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to

provide mobile app and user id and password for monitoring 20 passengers .

Ground plus 1 upper floors with Rated Speed of 1 m/sec with micro price/PLC

control and ACVVVF. drive , (C) With General PLUS ADDITIONAL SPECIAL

FEATURES attached herewith. Prem. Cat.

Sub Estimate -02 (Electrical)

Total Amount ( Civil, Interior, Electrical Work) Total Amount

Total Amount ( Civil, Interior, Electrical Work) Total Amount

Rupees One Crore Fifty Three Lakh Thirty Nine thousand Four hundred Twenty Three Only

(A) Total Tendered Amount

(B) Rebate on above tender amount (if any)……………...….……% in figure

(C ) Net Tendered Amount (A-B)

Please strike out whichever is not Applicable

1 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

2 All the columns in schedule should be filled in Ink and the total of the entries in the last columns should be struck by

3 Rates quoted include clearance of site ( Prior commencement of work and its close) in all respects and hold good for work under all

4 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed specification

5 I/We hereby declare that, I/We have visited the site and fully acquainted my self / ourselves with the local situation regarding materials & other

6 I/We hereby declare that, I/We have carefully studied conditions of contract, Specifications & other than tender documents of this work and

7 The price bid shall include all taxes,duties, levies, fees and other charges except GST as per applicable taxes including service tax & labour cess.

8 The credit of Dismental Matrials shall be deducted from the RA Bill.

Qty Item of Work In Rupees Unit Amount In Words

Deputy Executive Engineer,( Civil) Executive Engineer (Civil)

PIU, Gandhinagar PIU, Gandhinagar

Deputy Executive Engineer,(Ele.) Executive Engineer(Ele.)

PIU, Gandhinagar PIU, Gandhinagar