DAY TO DAY BR MAINT SERVICES IN NORTH SIDE OF RUNWAY IN TECH AREA AT AF STN JODHPUR

Amount

Demolition of stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing off debris properly outside MD land complete all as specified and as directed by the Engineer - in - Charge.

Taking down cement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for squared rubble walling, Jodhpur type, brought upto courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Material & labour for squared rubble walling (Except stone) Jodhpur type, brought upto courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for rendering 15mm thick in cement mortar 1:4, on stone masonary surfaces or surface other than fair face of brickwork surfaces, surface finished fair and even complete all as specified & directed by the Engineer-in-Charge.

Material & labour for rendering 10mm thick in cement mortar 1:4, on concrete surfaces in ceilings, surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying 2 mm thick white cement base wall care putty and applying two coats of oil emulsion distemper, white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in floors etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in vertical surfaces/skirting/dado etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed by the Engineer-in-Charge.

Material & labour for light coloured Non-Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for glazed ceramic light coloured tiles 7-8mm thick, of size 600mm x 300mm in vertical surface as in dado, set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles, laid over and including 10 mm thick rendering in cement motor 1:4 complete all as specified and as directed by the Engineer - in - Charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified & directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing approved colour powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window, ventilator with one or more rebates or aluminum section of two or more tracks in case sliding windows including jointing cleat for fixing complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing aluminium shutters duly approved colour powder coated (minimum thickness of powder coating 50 micron) as in windows and ventilator shutters, side hung type with sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, powder coating aluminium fittings such as peg stays 10 mm long 01 No, hinge type B-21 100 mm long (02 Nos), suitable handles 01 no in each window or ventilator complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing aluminium door shutters duly approved colour powder coated (minimum thickness of powder coating 50 micron) as in aluminium doors shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 02 nos in each door, door stopper, hinges, tower bolt, powder coating aluminium snap beading ,screws etc & including fixed in position star locks, ,rollers for sliding, complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 4mm thick ordinary quality sheet glass pane area exceeding 0.50 Sqm in each pane with necessary fittings like rubber beading, glazing clips etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing factory made Solid PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with M.S. tube, fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing Factory Made Solid prelaminated PVC Moulded Door Shutters, 28 to 30 mm thick (stiles) with particle board core, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel barrel tower bolt of size 150mm & fixed in positions complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed.

Supply & fixing stainless steel handles of size 125mm, complete all as specified and directed.

Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.

Material and labour for resecuring or easing & adjusting without taking down the shutter of any description not exceeding 1 sqm each complete all as specified & directed by the Engineer-in-Charge.

Material and labour for taking down wooden shutters of any description exceeding 1 sqm but not exceeding 2 sqm including easing & adjusting to make it fully functional and refixing in the same opening with same hardware complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs 25mm dia stainless steel curtain rod decorative type design and pattern as approved by GE including both end supports, complete all as specified and directed.

Supply & fixing in repairs 25mm dia stainless steel curtain finials for curtain rod both ends complete all as specified and directed.

Supply & fixing in repairs stainless steel barrel tower bolt of size 150mm of extruded section & fixed in positions complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repair 300 mm long stainless steel, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs stainless steel handles, of size 125 mm complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

Supply & fixing in repairs Brass handles, cast type, polished bright of size 125mm complete all as specified and directed.

Supply & fixing in repairs floor door stopper of brass body and tongue with hard drawn steel spring with overall length of cover plate 150 mm, fixed in floor complete all as specified and as directed.

Supply & fixing in repairs mild steel peg sets of 5 Nos peg set of good quality, complete all as specified and directed.

Supply & fixing coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

Supply & fixing in repairs solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

Supply & fixing in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with overall length of cover plate 75 mm, fixed in floor complete all as specified and as directed.

Suppy & fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 4 mm plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane (Beads shall be measured and paid separately) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 4 mm thick frosted glass ordinary quality in square not exceeding 0.5 Sqm in each pane with oil putty/wooden beading including hacking out old broken glass (any thickness, size, quality or description) from the steel/wooden frames complete all as specified and directed.

Supply & fixing in repairs IInd class hard wood beads , straight (any size) for glazed or gauzed joinery , renewed including mitres etc complete all as specified & directed by the Engineer-in-Charge.

Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.

Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Refixing of 15mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge.

Refixing of 20mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs brass CP Bib taps, fancy type, 15 mm bore, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs EWC seat cover PVC colour as approved by GE including all fitting arrangements complete all as specified and directed.

Supply and fixing in repairs two way brass chromium plated fancy type bib cock 15mm bore complete all as specified and directed.

Supply and fixing in repairs 15 mm bore fancy type brass chromium plated Wall mixer for mixing hot and cold water screwed down for iron pipe complete all as specified

Supply and fixing in repairs 15 mm bore center hole basin mixer brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down of size 200 mm x 200 mm complete all as specified and directed.

Supply and fixing in repairs of fancy type pillar taps brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed.

Supply and fixing in repairs of brass Chromium plated angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed.

Supply and fixing in repairs tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge.

Supply and fixing in repairs of brass Chromium plated fancy type Towel Rack (two shelf) size 60 cm long and 18 to 20 mm dia complete all as specified and directed.

Supply and fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by GE complete all as specified and directed.

Supply and fixing in repairs Sheet glass corner shelf 300mm assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing as approved by GE complete all as specified and directed.

Supply and fixing in repairs chromium plated handspray (ABS Body) with flexible pipe length not less than 1.00 m (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 90gm/each complete all as specified and directed.

Supply and fixing in repairs brass chromium plated Paper holder for EWC complete all as specified and directed.

Supply and fixing in repairs of brass Chromium plates fancy type soap dish complete all as specified and directed.

Supply and fixing in repairs chromium plated grating of size 100 mm dia complete all as specified and directed.

Supply and fixing in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed.

Supply and fixing in repairs for 25 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 455 gms) complete all as specified and directed.

Supply and fixing in repairs of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repairs of vitreous china water closet (squatt pattern) complete including provision of lime concrete bedding fixed in repair of orissa pattern size 580x440mm, white, with and including foot rest (excluding flooring cistern & flush pipe) complete all as specified and directed.

Supply and fixing in repair of vitreous china wash down water closet pan (pedestal pattern) white and trap including connection to drain flush pipe and anti syphonage pipe complete all as specified and directed.

Supply and fixing in repairs of vitreous china wash down water closet single piece snow white with P/S trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified.

Supply and fixing in repairs internal fittings Kit complete for vitreous china flush cistern with twin flush complete all as specified and directed.

Supply and fixing in repairs PVC valveless syphonic action type flushing cistern low level 10 ltrs capacity white, fixed with new brackets complete all as specifed and directed .

Supply and fixing in repairs of flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and directed.

Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed.

Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed.

Supply and fixing in repairs PVC float set complete of internal flushing system fitting in side for low levelling PVC cistern complete all as specified and directed.

Supply and fixing in repairs good quality rubber washers for low level flushing cistern complete all as specified and directed.

Supply and fixing in repairs aluminium (extruded section body) door closer hydraulically regulated designation No 1 universal type suitable for door shutters upto 700 mm in width and of weight not more than 35 Kg complete all as specified and directed.

Supply and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply and fixing in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 750 X220 mm of best quality complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160mm complete all as specified and directed.

Cleaning and removing all scale and dirt etc from overhead water tanks of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place including writting date of cleaning on tank with enamel paint complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc from overhead water tanks of capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place including writting date of cleaning on tank with enamel paint complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs CP waste coupling 32 mm dia with long shank and fly nuts etc for wash basins complete all as specified and directed.

Supply and fixing in repairs CP waste coupling 40mm dia for steel sink / urinal with long shank and fly nuts etc complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 40 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed.

Material & labour for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps /shower/ WHB pillar tap/Stop valves by Air pressure/ water gravity pressure etc complete all as specified & directed.

Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 500 Ltr but not exc 1000 Ltr & removing to site etc complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 250 Ltr but not exc 500 Ltr & removing to site etc complete all as specified and as directed.

Supply and fixing in repairs tank cover black (with arrangement for locking) of water storage tank of any capacity complete all as specified & directed.

Material & labour for repairing leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spendles as required complete all as specified and directed.

Material & labour for repairing lekage of 15 mm bore CP bib tap/ Piller tap/ stop cock by replacing of necessary brass spendles half round turn as required complete all as specified and directed.

Material & labour for repairing leakage of 15 mm bore CP Wall mixer/ CP WHB mixer/ concealed stop cock by replacing of necessary jaquar/ cera brass spendles half round turn as required complete all as specified and directed.

Taking down and re-fixing of old aluminum door shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips, area exc 2.00 sqm but nexc 4.00 sqm each complete all as specified and directed. Note : Glass pane and wire gauge will be measured and paid separately.

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including glass rubber beading door frame rubber beading and glazing clips, area n.exc 2.00 sqm each complete all as specified and directed. Note : Glass pane and wire gauge will be measured and paid separately.

Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Material & labour for cutting of tree branches and felling of trees girth n exc 30 cm (measured one metre above ground level) and removing the tree/branches to a distance not exceeding 50 mtr, clearing site all as directed by Engineer-in-Charge

Supply and fixing stainless steel handle of 110mm size as per approved sample for kitchen cabinate shutter complete all as specified and directed.

Supply and fixing sliding telescopic channel high grade mild steel, bright finish or electrogalvanised of size 20" as per approved sample

Supply and fixing magnet catch for CB/ cabinet shutters as per approved sample complete all as specified and directed.

Supply and fixing in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30mm width of flaps (when open), complete all as specified and directed.

Supply and fixing in repairs brass Locks of 4 Levers for cupboard, grade I, size 65mm or equivalent of make given in Appx 'B' as approved by GE.

Supply and fixing in repairs brass mortice lock of 4 Lever vertical type, size 100 mm for doors or equivalent of make given in Appx 'B' as approved by GE.

Supply and fixing in repairs 18mm thick solid PVC ply of 1st quality of both side prelaminated of approved colour fixed with screwes, solvent cement /adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed.

Supply and fixing in repairs 18mm thick PVC coated ply of grade 1 quality of both side white colour fixed with screwes, solvent cement /adhesive to making of furniture /wall panelling/ CBs shutters etc. complete all as specified and directed.

Supply and fixing in repairs 12mm thick PVC coated ply of grade 1 quality of both side white colour fixed with screwes, solvent cement /adhesive to making of furniture /wall panlling/ CBs shutters etc complete all as specified and directed.

Supply and fixing stainless steel (AISI-304) Plain basket of size 21"x20"x4" best quality as per approved sample as approved by GE.

Supply and fixing stainless steel (AISI-304) Plain basket of size 21"x20"x6" best quality as per approved sample as approved by GE.

Supply and fixing stainless steel (AISI-304) Tali basket of size 21"x20"x8" best quality as per approved sample as approved by GE.

Supply and fixing stainless steel (AISI-304) Cutlry basket of size 21"x20"x4" best quality as per approved sample as approved by GE.

Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over and including 20mm screed bed in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge.

Material & labour for green baroda marble stone of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm screed bed in CM 1:4 complete all as specified and directed.

Rounding/chamfering to edge of stone slab like granite, marble, kota stone etc to required shape & design including grinding & polishing to obtain required finished complete all as specified and directed.

Dismantling of old unserviceable, rusted, broken (corrugated/semi corrugated, etc.) CGI/AC/ Fibre glass sheets in ridge and roof coverings complete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) Quality-B complete.

Supply & fix Pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap, fixed with L- or J- type or cranked hook bolts and washers, in roofs, walls etc. complete all as specified and as directed by the Engr-in - Charge.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Material & labour for running welding in repairs, thickness of metal to be welded not exceeding 6mm complete all as specified & directed.

M/S KAUTILYA GARG