Installation of Mini Mast at Various Locations (8 Nos)

Amount

Mini Mast

Supply Installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70m top diarneter. 155 rnm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for Windspeed as per IS 875 part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos lurninaries in symmetrical arrangernent including connector foundation bolt 4 nos fixed in existing RCC foundation adn.junction box etc. coniplete 9 meter

Supply Conveyarrce. installation. testing and commissioping 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP66proctection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 atfull load internal surge cover complete with THD less than l0%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessiblle for maintenance (LM 79&80 cerriflcates fiom NABL accredited Third party lab to be produced rnentioning chip manufacture)

Supplying and embedding following dia GI pipe (medium class) in pole collar/ fiundation (during casting) for cable entry including bending the pipe to the required shape complete as required.(including for support to service wire-6m long GI pipe for each )40 mm dia medium class

Supply & drawing the following sizes of multi core PVC insulated & FRLS PVC sheathed 650/1110 V grade copper conductor round flexible cable conforing to IS 694 part I 1960 in the existing surface /recess conduit as required including giving necessary connections of the following sizes 3 core 1.50 sq nn

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in ground including excavation of trench of size 35x75 cm refilling the trenches etc as required but excluding sand cushioning and protection covering (in ordinary soil )2 core 6sqmm

Supply, laying and clamping of 1no PVC insulated and PVC sheathed aromoured aluminium power cable 1.1 KV grade of the folloing size using clamps noted along with the cables spacing of clamps not exceeding 60cms making ood the damages colour washing etc as required 2 core 6sqmm with factor made clamp

Supplying and making end termination with brass compression gland and aluminium lungs for following size of PVC insulated and PVC sheathed/ XLPE aluminium condoctor cable of 1.1 KV grade as required 2x6 sq mm (19 mm)

Supplying laying and jointing of the following size of dowble wall corrugated (DWC) pipes made out of HDPE conforing to IS IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trenches 50/38 mm or nearest size

Supplying and fixing following rating double 240 Volts isolator in the existing MCB DB complete with connections testing and commissioing etc as required 40 amps

Supplying and fixing following rating double pole (single phase and neutral) 240 V residual current circuit breaker(RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connection testing and commissioing etc as required 25 amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.single pole

Supply and fixing Analog timer of Havells (Cat No DHTED30016)or similar make of Theben OBO , L&T

Supply and fixing class B+C Type surge protection device V25-B+C/I+NPE, 320V 1 Phase Type 1+2 Surge Protection Device for TT (1+1) system with potential free contact, termal disconnector & provisions for inbuilt common remote indication for defective arrestores of OBO/Citel/L&T/Dhen make or similar make including earth connection

Earthing with GI earth plate 600mmx600mm x6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required

Supply and providing test jointing for the earthing system using 2x25x3mm GI strip including cutting and bending to shape drilling necessary holes and fixed to the watering pipe etc required

Supply and providing earth lead from the test joint to the earth electrode using25x3mm GI strip including cutting drilling necessary holes (in case of strip) and fixing frimly with plate test joint etc as required

Supply and drawing bare earthing conductor of the following sizes along with wiring/cable and giving connection as required 3.15 mm copper conductor (10 SWG)

Supply and superior quality copper earth socket for the following size of earth conductor including crimping

Supply and providing the following size of bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required 25x3 mm brass bolt & nuts

Fabrication supply & installation of dust and vermin proof wall mounting MS meter box of 600x600x214mm size suitable for fixing KSEB meter etc hinged door construction for the front side with compartmenst if necessary providing vision panel for the meter compartment knock out for cable entry and exit .1phase Meter and accessories

Supplying and fixing 32A HRC Fuse with HRC fuse Link with connections in existing meter board

Supplying and fixing 32A HRC Fuse with HRC fuse Link with connections in existing meter board

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excaveted soil as directed within a lead of 50 meters

Providing and laying in postion reinforcement cement concrete 1:2:4 (1cement:2 coarse and 4 graded stone agregate 20 mm nominal size) in foundation of pole terminal box etc including form work etc required (excluding reinforcement)

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels

Supply and fabrication coveyance and installation of angle iron frame work for wall mounting panel board

Reinforcement for RCC works bend tied and placed in position (plain grill requiring bend cold ) using steel

ALLUMINA ELECTRONICS

Bidder Name

SIVARAM.E

ALLUMINA ELECTRONICS