Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND BEING L1 BIDDER | |
| 2 | L2₹12.1 L+₹3.1 L (34.5%)Rejected-Finance NEAR KRIPAN TCP GATE PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹12.8 L+₹3.8 L (42.7%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹12.9 L+₹3.9 L (43.7%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹14.0 L+₹5.0 L (56.1%)Rejected-Finance DS COLONY BINNAGURI TG ROAD OPP MILAN SANGH CLUB POST BINNAGURI DISTT JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹14.4 L
EMD Value
₹28,800
Closing Date
2 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE BINNAGURI
HQ CWE BINNAGURI, BINNAGURI CANTT, JALPAIGURI, WEST BENGAL, PIN-735232
ADDNALT TO HQ CWE BINNAGURI BLDG (P-12) FOR PROVISIONAL FOR MODEL CUM SAMPLE ROOM AND LADIES REST ROOM AT BINNAGURI MIL STN UNDER GE SOUTH BINNAGURI
2023_MES_623160_1
8110/E8
Open Tender
Miscellaneous Works
Item Rate
120 days
BINNAGURI MIL STATION
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (S) BINNAGURI
₹28,800
Yes
16 Dec 2023
13 Oct 2023
3 Nov 2023
13 Oct 2023
2 Nov 2023
27 Oct 2023
Amount
Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site, complete all as specified and directed by Engineer-in-charge.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets, complete all as specified and directed by Engineer-in-charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed by Engineer-in-charge.
Demolition of brick walling built in cement mortar etc complete all as specified, complete all as specified and directed by Engineer-in-charge.
M&L for Verified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM(1:6), complete all as specified and directed by Engineer-in-charge.
All as per Serial item no 7 as above but as in skirting 10 cm height, complete all as specified and directed by Engineer-in-charge.
M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4), complete all as specified and directed by Engineer-in-charge.
M & L for 18 to 20 mm thick granite (jet black) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite, complete all as specified and directed by Engineer-in-charge.
M & L for providing and fixing gypsum boards 12 mm thick in ceiling fixed with screws as sper manufacturers instructions and complete all as specified and directed by Engineer-in-charge.
S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engineer-in-charge.
M & L for Preparing new surfaces of ceiling and applying two coats of oil emulsion distempering cover a 1 mm thick coat of putty, complete all as specified and directed by Engineer-in-charge.
S&F in repairs of 12mm thick block boards grade -2 quality interior grade, commercial type including teak wood lipping 6mm thick all round fixed with nails to timber frame work, complete all as specified and directed by Engineer-in-charge.
S&F in repairs of 18 / 19mm thick block board grade 2 quality with decorative face veneers on one face fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails, complete all as specified and directed by Engineer-in-charge.
S&F for Anodised aluminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285, complete all as specified and directed by Engineer-in-charge.
S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling, complete all as specified and directed by Engineer-in-charge.
S&F of Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-charge.
M&L for brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks, complete all as specified and directed by Engineer-in-charge.
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall, complete all as specified and directed by Engineer-in-charge.
M&L for RCC (Nominal mix) (Type B-1 1:2:4) (using 20 mm graded stone aggregate) for slabs suspended on walls, beams , in floors, roofs, landings and in shelves and the like, complete all as specified and directed by Engineer-in-charge.
M&L for Form work to sides and soffit of beams, lintels, shelves of slabs/ beams and similar works including supports, over hangs etc rough finished surfaces of concrete, flat. Etc, complete all as specified and directed by Engineer-in-charge.
All as per Serial item No 22 as above but 6 to 8 mm dia as in stirrups, complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair, complete all as specified and directed by Engineer-in-charge.
M&L for two coat of Oil bound distemper on new wall surface including preparation of the surface, complete all as specified and directed by Engineer-in-charge.
M&L for applying 1.0 mm thick wall care putty on new or old wall surface, complete all as specified and directed by Engineer-in-charge.
M&L for Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer over super fine putty finish as required, complete all as specified and directed by Engineer-in-charge.
S & F in repair factory made UPVC white colour Sliding window three track (Area n exc 2.0 Sqm each) made of extruded profiles with wall thickness of 2.3 mm (+- 0.2mm) window profiles with hollow section with multi chamber, frame (88 mm x 52 mm ), sliding sash (42 mm x 67 mm) sliding mesh sash (42 mm x 57 mm ) sliding interlock (one vertical length in each shutters) ( 45.50 x 28 mm), glazing bead (24.5 mm x 16 mm ) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanised steel frame (30 x 18 mm ) 2 no's sliding sah (30mm x 18 mm) sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, hardware (Touch Lock of Zinc alloyed ( white power coated) steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories, complete all as specified and directed by Engineer-in-charge.
S & F in repair of factory made UPVC white colour fixed glazed window/ ventilator made of (small series) frame 47x 50 mm mullion 47x68 mm both having wall thickness 1.9 +/- 0.2mm and single glazed bead appropriate dimension(Area up to 0.75 sqm) comprising of UPVC multi chambered frame and mullion (where ever required0 extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from rolled forming process of required length (shape and size according to UPVC) profile), UPVC extruded glazing beads of appropriate dimensions, EPDM gasket, GI fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profiles of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded incl drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled weather roof silicon sealant over backer rod of required size and approved quality, complete all as specified and directed by Engineer-in-charge. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimensions i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F of 8/9mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove, F/J edge trims where required fixed with hidden screws to and incl steel/wooden frame work of width 75mm, complete all as specified and directed by Engineer-in-charge.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints, complete all as specified and directed by Engineer-in-charge.
S&F of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS, complete all as specified and directed by Engineer-in-charge.
Taking up or down 15 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge.
Taking up or down 20 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge.
S&F of GI tube 15 mm bore medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.
S&F of GI tube 20 mm bore medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail if section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ frosted float glass, and with anodised aluminium snap beading of size 18.20 mm x 16.66 mm screed for fixing fully including all necessary fittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one, complete all as specified and as directed by Engineer-in-charge.
S&F of 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section, complete all as specified and as directed by Engineer-in-charge.
M&L for 150 mm size aluminium anodised cast type handles, complete all as specified and as directed by Engineer-in-charge.
S&F of 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and as directed by Engineer-in-charge.
S&F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed by Engineer-in-charge.
S&F of 100mm size mild steel butt hinges medium weight, complete all as specified and as directed by Engineer-in-charge.
S & F of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with suitable fittings and arrangement , complete all as specified and as directed by Engineer-in-charge.
S&F in repair of Vitreous China wash down water closet pan (pedestal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging device etc, complete all as specified and as directed by Engineer-in-charge.
S&F in repair of CP Health Faucet of premium quality including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe, complete all as specified and as directed by Engineer-in-charge.
S&F in repair of 15 mm bore two way bib cock CP with flange , complete all as specified and as directed by Engineer-in-charge.
S&F in repairs of 15 mm bore Angular stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, symphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC, complete all as specified and as directed by Engineer-in-charge.
S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc, complete all as specified and as directed by Engineer-in-charge.
S&F for PVC (SWR) of 110 mm size bends any radius fixed to PVC Pipes/ Steel Gutters etc, complete all as specified and as directed by Engineer-in-charge.
S&F in repair of wash hand basin, vitreous China, white, flat back (550x400mm) cutting for and pinning ends of brackets Indus Basin (white) or equivalent and waste fitting, brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length, complete all as specified and as directed by Engineer-in-charge.
M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm), complete all as specified and as directed by Engineer-in-charge.
S&F of Bottle trap of having minimum water seal of 32mm, complete all as specified and as directed by Engineer-in-charge.
Taking down carefully aluminium/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc, complete all as specified and as directed by Engineer-in-charge.
M&L for concealed point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes 60 mm deep, on walls with modular back plate and top cover, fixed on wall / other surfaces with brass screws for mounting or housing modular switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good disturbed surfaces to match with adjoining surface, complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 55 above but for one fan / exhaust fan point controlled, complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 55 above but for one 5 / 6 Amps socket outlet point on same board, complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 55 above but for one 5 / 6 Amps socket outlet point on independent board, complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 55 above but for one bell point controlled by 5 Amps bell push, complete all as specified and as directed by Engineer-in-charge.
All as per Sl. item No. 55 above but with 2.5 sqmm (nominal area) cable with 2.5 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards, complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No. 55 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards, complete all as specified and as directed by Engineer-in-charge.
S&F of Modular switch 1 way 6A, 1 modular 240 volts, complete all as specified and as directed by Engineer-in-charge.
S&F of Modular switch 1 way 16A, 1 modular 240 volts, complete all as specified and as directed by Engineer-in-charge.
S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240 volts, complete all as specified and as directed by Engineer-in-charge.
S&F of Modular Socket, 6/16A - 2/3 pin combined 2 module 240 volts, complete all as specified and as directed by Engineer-in-charge.
Supply and fix of bell push, modular type, 10 Amps 230 volts, single pole, one way, with white cover plate and frame, complete all as specified and as directed by Engineer-in-charge.
Supply and fix of Call bell ding dong musical type, AC, 230 Volts, Single pole, complete all as specified and as directed by Engineer-in-charge.
S&F of ceiling rose, surface bakelite 65 x 50 mm three terminal, complete all as specified and as directed by Engineer-in-charge.
S&F of stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 230/240 Volts grade, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unserviceable one, complete all as specified and as directed by Engineer-in-charge.
Supply and fix of LED light fitting single tube 1 X 20 Watts (4 feet), 240 V surface or wall mounted led batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally pre-wired and including 02 Nos of round/ square PVC blocks with brass screws for fixing of fitting over surface or wall connecting up with twine core twisted flexible copper contactor cable with 1.5M long suitable size, complete all as specified and as directed by Engineer-in-charge.
Supply and fix of LED light fitting single tube 1 X 10 Watts (2 feet), 240 V surface or wall mounted led batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally pre-wired and including 02 Nos of round/ square PVC blocks with brass screws for fixing of fitting over surface or wall connecting up with twine core twisted flexible copper contactor cable with 1.5M long suitable size, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair of MCB SPN 240 Volts 6-32 Amp breaking capacity 10 KA rating including taking down old unserviceable one, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair of MCB SP 240 Volts 6-32 Amp breaking capacity 10 KA rating including taking down old unserviceable one, complete all as specified and as directed by Engineer-in-charge.
Supply and fix of sheet metal enclosure powder painted for MCB SPN 8 way double door DB with din rail and 200 Amps rated bus bar, complete all as specified and as directed by Engineer-in-charge.
S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.
M&L for concealed sub main wiring with two run of size 6 sqmm PVC insulated electric power cable (heavy duty) 1100 volts grade with multi stranded copper conductor with 6.0 sqmm PVC insulated copper conductor green as earth wire drawn in and including 20/25 mm dia rigid PVC conduit of suitable size (two run of 6 sqmm cable and one of 6.0 sqmm wire and one run of PVC conduit will be measured as one unit) including dismantling of existing unserviceable submain wiring, complete all as specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) , complete all as specified and as directed by Engineer-in-charge. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.
S&F of concealing of rigid non-metallic PVC conduit of size 25 mm dia inclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including boxes and sockets for lan switch, complete all as specified and as directed by Engineer-in-charge.
S & F of spring suspended over table LED light including 10 W LED lamp including provision for variation in height from - 0.0 to - 45.6 inches and hanging the same to ceiling with proper size of hook , complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
R K AGARWAL
M/s. MD IRSHAD
L. B. SHARMA
M/S RATNESH KUMAR SINGH
ANUP ENGINEERING WORKS
BHANU GAJMER
PULAK SAHA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .