Spl Repair to roof, wall plaster, false ceiling in Bldg No T-13, P-87 and T-8 (Confrence Hall) at HQ UK Sub Area, Spl Repair of Sewage and drainage system of 20 Kumaon (OTM Accn) at Birpur and Provn of wire for mosquito net and peg set for Bldg No P-

Amount

M&L cutting holes into or through brick walls exc 150 sqcm but n exc 400 sqcm built in cement mortar and making good in CM (1:3) and cement concrete (1:2:4) type B-1 depth of hole 15 to 23cm complete all as specified and directed by Engr-in-Charge.

S&F mild steel plates (plain or chequred) (Fe 410-W Gde-E-250 quality 'A') channels, square cut or notched (ordinary and counter sunk forming holes, with or without attachments complete all as specified and directed by Engr-in-Charge.

S&F mild steel joint channel (Fe-410-W Gde E-250 quality 'A') angle or Tee section MS tubes, flats square bars etc as in any framing confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge.

S&F rolled structural steel as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde-E-250, Quality 'A') complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or squre nut, length of bolt exc 5cm but n exc 10 cm long complete all as specified and directed

S&F 4.00mm thick plain mild steel wire glavanised class 3 in detached work sucha as for mosquito nets and fixing to straining bolts, hooks, eyes etc including securing with and provisioning of galvanised iron tying wire, galvanised iron staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified and directed.

S&F in repairs peg set of five, cromium plated back plate fixed to wall with cadmium plated brass screw complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa made to profile as in ridge, vally galter of roof, fixed with self tapping screws complete all as specified

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks built in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water complete all as specified

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:3) finished surfaces even and smooth complete all as specified and as directed.

M&L rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L rendering 15m thick on fair faces of brick work in CM 1:4 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

S&F pre laminated Solid PVC Door frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F Factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification complete all as specified and as directed by Engr-in-Charge.

S & F factory made steel ventilator with top hung shutters including hinges with steel handles, steel peg stay, complete.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.

S & F of 300 mm long (Length of bolt) mild steel, sliding door bolt with hasp, staple (bolt type) complete all as specified and directed.

S&F 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fix CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Cutting chases pointing in CM (1:3) to ends of landings, shelves, cills lintels etc cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting n exc. 10cm in brick wall/ RCC complete all as specified and directed.

S&F 15mm bore chromium plated fancy type long body bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified.

S&F 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 105gms) complete all as specified and directed.

S&F 100mm dia bore cast soil, waste and vent pipes (spun cast pipes) conforming to IS-3898 in any length with or without ears with cement joints laid in floors complete all as specified and directed.

S&F 75mm dia bore cast soil, waste and vent pipes (spun cast pipes) conforming to IS-3898 in any length with or without ears with cement joints laid in floors complete all as specified and directed.

All as per item No 32.00 here in above but 50mm bore but fixed to wall includig necessary GI stack clamps complete all as specified and directed by Engr-in-Charge.

S&F 100mm dia centrufugally cast iron spun pipe in any length with or with ears, with cement joints fixed to wall etc.

S&F 75mm dia centrufugally cast iron spun pipe in any length with or with ears, with cement joints fixed to wall etc..

S&F 75mm dia centrifugally Cast iron spun floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1(1:2:4) complete all as specified

Taking up or down steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

M&L steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

M&L steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

M&L for 50 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor, finished even and smooth without using extra cement, complete all as specified

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified

M&L for Non skid ceramic coloured tiles square/rectangular of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of tiles incl screed bed of 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for joint free vetrified double charged coloured size of 600x600x9 to 10mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick rendering in CM (1:3) complete all as specified. (Johnson digital tile)

Item No 43.00 here in above but in skirting /riser/dado complete all as specified and directed by Engr-in-Charge.

M&L for coloured digital ceramic tiles in vertical surface400x400x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified. (Johnson digital tile)

M & L for Glazed ceramic coloured tiles of size 300x450 mm X 6- 8 mm thick on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with colour cement to match the surface including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 200x300x7mm X 6- 7 mm thick on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with colour cement to match the surface including 10 mm thick rendering in CM (1:6) complete all as specified and directed.

M & L for 75mm thk PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement. The plinth protection shall be laid in alternate bays nexe 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

Earth filling under floors including spreading, levelling, watering and wall ramming in layers n exc 25cm thick. Note Soil obtained from excavation under item No 1.00 here in above shall be used for filling.

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) for foundations,mass concrete etc, complete all as specified and as directed .

S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified. Make : Hindware/Parryware/Cera

S&F half stall Vitreous China urinals 600mm long, half stall with CP brass urinal spreader, PVC waste pipe CP waster cupling including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified.

S&F vitreous china squatting pan Orrisa pattern of size 580x440mm white with integral foot rest including connecting to trap and flush pipe anti-syphonage pipe incl provision of lime concrete bedding complete all as specified and directed.

S&F PVC, white, low level flushing cistern 8 ltr capacity with all fittings syphonic action with inlet ball valve and float with & including PVC flush pipe 32 mm bore complete all as specified and directed

S&F vitreous china wash hand basin, white flat back, size 440x550mm excluding taps but including waste pipe, CP waste fittings 32mm size long shank,brass and MS brackets all as specified and directed by Engr-in-charge.

S& Pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil etc,complete all as specified and as directed.

M&L for 18-20mm Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and bull nosing to the exposed edges complete all as specified

M&L for PU polish in any colour to existing wooden flooring including minor repair to flooring complete all as specified and directed.

Grinding , cut and mirror polishing of existing marble stone of floor/vertical surface including repair in existing floor complete all as specified and directed.

M&L 40mm thick sand stone slabs polished, over 20mm thick cement mortar (1:4) in cement and set and joineted stone dust mortar (1:3) and pointed in cement mixed with approved pigment to match complete all as specified and directed.

M&L for laying sand stone slab (except store) polished over and including 20mm thick cement mortar (1:4) bedding and set jointed with cement and stone dust mortar (1:3) and pointed in cement mixed with approved pigment to match complete all as specified and directed.

M&L for 75mm cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) sub base to receive top layer complete all as specified and directed.

Taking down and refixing of flase ceiling LED lights of size 600x600mm or other any size and design in the same position after executing the work with electric connection complete all as specified and directed by the Engr-in-Charge.

Excavation over areas not exceeding 1.50 metre depth for foundation, manhole etc including getting out in soft/loose soil complete all as specified and as directed

Excavation over areas exc 1.5 mtr but not exceeding 3.00 metre depth for foundation, manhole etc including getting out in soft/loose soil complete all as specified and as directed

Excavation over areas exc 3.00 mtr but not exceeding 4.50 metre depth for foundation, manhole etc including getting out in soft/loose soil complete all as specified and as directed

Excavation over areas exc 4.50 mtr but not exceeding 6.00 metre depth for foundation, manhole etc including getting out in soft/loose soil complete all as specified and as directed

M&L for precast reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A').

M&L for Plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain and manholes, forming fair finished drain or channel using extra cement including forms, moulds mitered or stopped ends complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in benching, coping including necessary form work complete all as specified and as directed

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:4 complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in one brick thick honey combing walls complete all as specified and as directed.

Supply only liquid water proofing compound as per manufacturer's instructions . Make- Pidilite/fosrock/bauchemic/Sika.

M&L for reinforced cement concrete (nominal mix) (1:1½:3) type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, shelves and the like.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Item No 82.00 here in above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engr-in-Charge.

M&L TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

M & L for formwork to edges of concrete flats, break in floors, treads, window cills, concrete railing and similar items n exc 20 cm wide and side of RCC/PCC bands in walls exc 10 cm but n exc 20 cm wide for fair finished surface of concrete complete all as specified and directed.

M & L for formwork to edges of concrete flats, break in floors, treads, window cills, concrete railing and similar items n exc 20 cm wide and side of RCC/PCC bands in walls n.exc 10 cm wide for fair finished surface of concrete complete all as specified and directed.

M&L reinforced concrete pipe, ’ 150 mm bore , class NP-3,laid in trenches and jointed with collars,complete all as specified and as directed. (Excavation shall be measured and paid separately).

S&F framed work as in doors and gate of angle and other section with gusset plate, rails, braces etc and other similar works and prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) conforming to Fe-410 W Gde E-250 quality 'A'

M&L for 80 mm thick reinforced precast cement concrete factory made man hole covers including frame of any size and shape (square/rectangular/circular) light duty, confirming to IS-12592, fixed at site complete all as specified and directed by Engr-in-charge

M&L Salt Glazed Stone Ware drain pipe, grade ‘A’ 150 mm bore laid in trenches and jointed complete all as specified and as directed. (Excavation and earth work shall be measured and paid separately).

M&L cement Concrete bed to drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed

M&L cement Concrete bed to drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and as directed

Cutting into existing manhole, 150 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed

M&L Salt Glazed Stone Ware drain pipe, grade ‘A’ 200 mm bore laid in trenches and jointed complete all as specified and as directed. (Excavation and earth work shall be measured and paid separately).

M&L for prepraration of new surface of wall and applying three coat of white wash complete all as specified

M&L for applying putty 2 to 3 mm thick on walls as per manufacture instruction including prepartion of surfaces all as specifed and directed .

M&L for preparation of new plastered /POP/ putty surfaces of walls and applying two coats of cement base paint over a coat of suitable primer complete all as specified and directed by Engr-in-charge

M&L for preparation of old decorated plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-charge

M&L for preparation of old plastered surface of wall and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered / POP / Putty surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of new plastered / POP / Putty surfaces of walls and applying two coats of exterior grade 1st quality weather proof paint over a coat of primer complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridge/valley complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets.

Dismantling timber scantlings 40 Sqcm and over in section in any position in framed work complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

Demolition of brick work masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition of (unreinforced) cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the MD land complete all as specified..

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for, reinforcement cut as required to facilitate demolition, complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rabbish off the premises.

M&L for demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons, vertical surface etc complete all as specified and directed by Engr-in-Charge.

M&L for false ceiling made out of E-board classic of size 600x600x4mm thick, GI frame consisting of main Tee of size 38.50x24.00 mm and cross Tee of size 28.50x24.00mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24.00x24.00x0.4mm thick powder coated suspended with GI wire 3mm dia and up to 2mtr long complete including pluging fixing of angle to brick walls with steel rawl plugs @450mm c/c and aplying two coats of oil bound distemper to the ceiling board complete all as specified and directed by Engr-in-Charge.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of

Item No 113.00 (Contd).....1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

Taking down of chowkhat with shutter (without taking of shutter from the frame) area n.exc 1.50 sqm each complete all as specified

Taking down of chowkhat with shutter (without taking of shutter from the frame) area exc 1.50 sqm and e exc 4 Sqm each complete all as specified

S&F pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fitting lugs, hinges, lock strike plate, hold fast and PCC on hingle to fixet with machine screws and mild steel flat on back side of frame including backing etc complete all as specified and directed by Engr-in-Charge.

S&F factory made, 35mm thick exterior grade MDF board BWR quality with complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F power coated box type window/ ventilators (steel) with fly proof shuter, fixed with dash throught bolts of standard quality, 100mm long handle in each shutter, 02 Nos tower bolts 150mm long & three hinges (Box type/ Capsule type) of each shutter of 75 length etc including 4mm thick sheet glass, 0.36mm stainless steel wire cloath with 1.40mm aperature, mild steel guard bars/ gril with frame etc complete all as specified and directed by Engr-in-Charge.

M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L sheet glass ordinary quality 3mm thick, glazing with oil putty in squares n.exc 0.50 sqm each pane complete all as specified and directed.

S&F (SS -304) Grade Drappery rod with stainless steel brackets stainless steel decorative finils at both ends complete all as specified.

S&F 75mm dia cast iron cowls.

S&F in repair for 100mm bore cast iron bends, tee of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engr-in-Charge.

S&F CI branch pieces single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches with over assess door 100mm bore complete all as specified and directed.

S&F in repair for 75mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) gully trap 125/110, setting & jointing with solvent cement inclduing mild steel cover complete all as specified and directed.

S&F in repair stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including beding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 914x460x203mm bowl size 405x354x203 mm complete all as specified and directed.

S&F in repair stainless steel plate rack of 20 gauge over all size 90x75x25mm fixed on wall with chromium plated screws, complete all as specified & directed.

Dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity and removing from site.

S&F rotational moulded polyethylene water storage tanks 1000 Ltrs capacity three layered, externally white (cylindrical vertical with closed top) hoisted and fixed in position including PTMT ball valve 20mm bore with polythelene float complete all as specified and directed.

S & F in repair of 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block, prepolished, coloured, any shape and size confirming to IS 15658-2006, of 60mm tickness, M-35 grade, in floors laid dry over 25mm sand cushion and joints filled with sand complete all as specified all as directed by Engineer-in-Charge.

M&L for 580x580mm size (in one colour) machine cut kota stone slabs 20-25mm thick, as in floors, shelves, steps etc, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab, over and including 15 mm thick cement screed bed in CM (1:6) including rounding off exposed edges ,complete all as specified.

All as per item No 135.00 here in above but in skirting/ riser/dado complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed steel juction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point / exhaust fan point/bell point ,SP, controlled by one way switch.

All as per Item No 136.00 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & F Switch piano flush type single pole one way 230 Volts 16 Amp complete all as directed.

S & F Socket outlet ,2 in 1,5 pin , 230 Volts 5 Amp & 15/16 Amps flush type multipurpose complete.

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 9/10/14 watts complete.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) and one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly drawing through and including 20 mm dia medium density concealled PVC conduit pipe, ,complete all as specified & directed. Make: Havells/Finolex/L&T

S&F sheet metal enclousers 240 volt with 200Amp rated bus bar for doubble door 8 wasy DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand/L&T/Indo Asian.

S&F MCB SP 240 Volt 10 KA 5 to 40 Amp 'C' series conforming to IS complete all as specified & directed. Make:Legrand/L&T/Hager/C&S.

BALAJI AND CO

Asian Builder