REPLACEMENT OF EXISTING LINE CONDUCTOR BY AAAC AL-59, 99 SQ. MM COVERED CONDUCTOR OF 11 KV KALSI FEEDER EMANATING FROM 33/11 KV SUB-STATION HARIPUR KALSI UNDER EDSD, DAKPATHAR UNDER EDD, VIKASNAGAR

Amount

Material

11KV AAAC AL-59 (99 sqmm) Covered conductor (SS4240813 & SS4240814) EN 50397-1:2006 the conductor shall be stranded,round,non compacted and water tight , Non compacted shall be comply with all the requirement of EN 50397-1.2006 The stranded conductor shall be longitudionally water blocked by means of a water blocking material the semi conducting screen inner insulation and outer insulation should be extruted in one step . the outer covering insulation shall be UV stabilized tracking resistant black XLPE Capacity 300 amp

Supply of MVCC accessories as per EN-50397-2 as below

11KV 90 KN Tension clamp with Bail and IPC (section Pole)

11KV Suspension ties on every Pin Insulator.

11Kv IPC for CC to CC Connection in every Section Pole

11Kv IPC for CC to Bare Connection at both end and Taping

11Kv Mid Span Jointing kit at every 500Mt. Cable drum

Supply IPC with Aluminium bail for earthing

Holding Clamp for SP-23 with N&B.

Labour

Cartage of SP-23 Poles from store centre to nearest road site with loading, unloading at both points. (Loading ,unloading plus carriage per poles) (0 to 100 km)

ST Pole SP-23 (Bottom Portion Hot dip)

Small Material

Head load Cartage of the following poles from road side to construction site ( rates are per pole /Km including loading/unloading at both points) (0 to 1 KM)

ST Pole SP-23 (Bottom Portion Hot dip)

Small Material

Excavation of earth and erection of ST pole SP 23 single support with CC Complete

Muffing of SP 23 pole

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium strip of fluorescent alternate Red and white paint 30 cm wide upto 1.5 mtrs from ground level

Fabrication of MS channel and angle

Removing of old conductor with opening of existing,jumpering,and making of bundle with carriage from pit size of JE store including loading /unloading complete work

Laying,spreading,stringing and sagging of 11KV AAAC AL-59 (99 sqmm) Covered conductor (SS4240813 & SS4240814) EN 50397-1:2006 the conductor shall be stranded,round,non compacted and water tight , Non compacted shall be comply with all the requirement of EN 50397-1.2006 The stranded conductor shall be longitudionally water blocked by means of a water blocking material the semi conducting screen inner insulation and outer insulation should be extruted in one step . the outer covering insulation shall be UV stabilized tracking resistant black XLPE

Fixing of MVCC accessories

11 KV 90KN tension clamp with bail and IPC

11 KV Suspension ties

11 KV IPC for CC to CC Connection

11 KV IPC for CC to Bare connection

11 kV Mid Span Jointing kit

Fixing of IPC with Aluminium bail for earthing

RP ELECTRICAL

RP INFRAPOWER PVT LTD