PROVN OF STORAGE SHED IN FRONT OF BLDG NO DY-63 OF 39 MTN DOU AT ALHILAL MIL STN

Amount

SCHEDULE 'A' PART-I:- Surface dressing not exceeding 15 cm deep in soft/loose soil, complete all as specified and directed.

Excavation in trenches n exc 1.5mtr wide and n exc 1.5mtr in depth for foundation etc in any type of soil and getting out soil, complete all as specified and directed.

M&L for plain cement concrete, M- 10 (Nominal Mix), type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified.

M&L for reinforced cement concrete, M-25 (Design Mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc, complete all as specified and directed.

M&L for reinforced cement concrete, M-25 (Design Mix) using 20mm graded crushed stone aggregates as in Columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M&L for reinforced cement concrete, M-25 (Design Mix), type B-1(using 20mm graded crushed stone aggregates) as in Beams, chajjas, cantilevers, bressummers, lintels over 1.5m span etc, complete all as specified and directed.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirmaing to TMT bars, complete all as specified and directed.

Mild Steel TMT bars 5 mm dia and over upto 10mm dia in stirrups and binders etc including cutting, binding bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to TMT Bars complete all as specified and directed .

M&L for 15 mm thick plastering in cement mortar 1:4 on stone masonary or surface other than fair faces of brick walls,as on external surfaces, surface finished even and fair without using extra cement, complete all as specified and directed.

M&L for 10 mm thick plastering in cement mortar 1:6 on brick surfaces or concrete surface,as on internal surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint to walls, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash,complete all as specified and directed.

M&L for 100mm thick, Plain cement concrete, M-10 (Nominal Mix), Type C-2 (using 40mm graded crushed stone aggregates) as in sub base of floor and path etc, complete all as specified and directed.

M&L for hard core of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick, plain cement concrete, M-10 (Nominal Mix), type C-1 (Using 20 mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 100mm wide white marble border complete all as specified and directed.

M&L for machine Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof cover/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof cover / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, complete all as specified and directed.

S&F mild steel work as in roof trusses framed), russed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or any flat section) including distance pieces,cleats etc conforming to fe-410-w,Gde-E-250,quality 'A', complete all as specified and directed.

M&L for preparation new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L for preparation new surface of wooden of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of pink primer zinc chrome primer, complete all as specified and directed.

M&L for PCC, M-10 (Nominal Mix) type C-2 (using 40mm graded stone aggregate) as in surface channels and drains, complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified.

Mild steel work as plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, etc., and similar small articles conforming to Fe- 410W, Gde-E-250, complete all as specified and directed.

S&F pressed steel framessize 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed complete all as specified and directed.

S&F plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated 2nd class HW rail and style 35mm complete all as specified and directed.

S&F 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

M&L for PCC, M-10 (Nominal Mix) type C-1 (using 20mm graded stone aggregate) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

S&F steel window side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dove tailed or welded complete all as specified and directed.

S&F steel window side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dove-tailed or welded complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed.

S&F mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, and fixed size 100mm medium weight, complete all as specified and directed.

S&F aluminium anodised,barrel tower bolts of extruded section and fixed size 200mm complete all as specified and directed.

S&F aluminium handles, cast type,anodised size 150 mm complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed size 250mm complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor size 140mm complete all as specified and directed.

S&F 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified

S&F Hi steel clip inn false ceiling system plai/perforated with steel/ aluminium tiles ( 600x600)mm manufactured out of 0.50mm thick polister coil coated galvanised steel having 120/180 grams zinc coating or 0.70mm aluminium powder coated with 0.50 micron polyester paint in AA5050,AA3105 or AA1050 aluminium alloy. Tiles shall have square or bevelled edge, coil Coated steel tiles shall have 20 micron polyster coated finished or on the front side back side coat of 5 micron alkyd primer. two side of each tile are raised and piped and stopped to ensure postive engagement in to spring clip in profile allowing for demounting of indiviual tile.e rigid suspension system consist of row of 0.50 mm galvanised galvanised steel clip in profile of 38mm installed at 600mm centre to centre a spcing to support the tiles suspension angle are suspended from roof structure /truss by GI ceiling bracket these are jointed clip profile by hold on clamps. the tiles/ planks are held in place by pressuring clips. In the flexible system hanger and butter fly clip replaced the the suspension angle wall angle shall be of size 24mm x 24mm x 0.40mm thick made of coil coated steel or aluminium matching the colour of tiles including necessary scafolding all as specified

M&L for coloured anti-skid outdoor full body vitrified tiles of size 600mm x 600mm x 15mm thick conforming to IS 4457:2007 as in parking/footpath fixed with spacers over 6mm thick high polymer modified grey cement based tiles adhesive and grouted with epoxy grout over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. MAKE:- Johnson (Meteor series of Johnson Endura) or equivalent make of Somany / Kajaria / Orient Bell /Nitco

SCHEDULE 'A' PART-II:- Point wiring for one 1.5 sqmm copper conductor cable (multi strand) FR-LSH PVC insulated unsheathed and incl PVC casing and caping of approriate size to be terminated in sunk cast iron pressed steel terminal boxes with all fitting such as Tee, connector, pieces, L-junction etc on joints including CI/MS/PVC sunk box of required size for mounting switches socket regulator etc with 3 mm thick plastic laminated sheet cover of adequate size for one light point controlled by one switch incl contionous 1.5 sqmm PVC insulated and unsheathed FR-LSH multistrand copper conductor earth wire to common earth and connected to earth dolly, complete all as specified and directed . Note - (i) wiring shall be done using colour code

All as per the description of serial item No 50 here-in-before but for one fan point/Exhaust fan controlled by one, one way switch and regulator complete all as specified and directed .

Supply and fixing switch piano flush button types 5 Amps single pole one way complete as specified.

Supply and fix LED bulk head luminaire IP-65 with LED bulb 10 W including provn of flexible cable 3 core, 23/.0076 and making connection complete all as specified and directed.

S&F ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/Polycarbonate, isolated body, complete all as specified and directed.

S&F LED batten with LED rod complete T-8, 1x18 W including provn of flexible cable 3 core, 23/.0076 from ceiling rose to connector complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated DB for fixing of MCBs, SPN 4 ways double door, IP-42 protection with 200 Amp rated bus bar, 240 Volts complete all as specified and directed.

Supply and fix MCB SPN 240 volts, 10kA, 50 Hz of capacity 6 to32 Amps 'B' series all as specified and directed.

Supply and fix MCB, SP 240 Volts, 6 to 32 Amps 10 KA, 'B' series complete all as specified and directed.

Supply and laying UG cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 16 Sq mm 2 core complete all as specified and directed.

Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5 m deep for laying of underground cable erecting of poles, stays and laying of under ground cables.

Returning and filling in including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as directed.

Sub class 'B' brick, old size as cable protection cover, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to the length of the brick, complete all as specified and directed.

Sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18cm for payment purpose), complete all as specified and directed.

GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with clamps, bore of pipe 40mm complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to 4mm dia galvanized iron wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 15mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg/sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. NOTE: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

M/S THAKUR ENTERPRISES

M/S Bharmouri Construction

VIVEKA ENTERPRISES