REPAIR AND MAINTENANCE OF FENCING TO CERTAIN OTM ACCN AT NORTH ZONE UNDER GE NORTH BINNAGURI

Amount

SCHEDULE A CIVIL WORKS Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in natural ground , including taking out embedded portion and making good disturbed ground complete all as specified. ( Note :- the vertical height above GL shall be measured for the purpose of payment towards work done)

Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for precast reinforced cement concrete type M-25, Design Mix (20 mm graded aggregate) in precast poles, fencing posts, straining or terminal posts, struts etc. for fencing, aaverage sectional area exc 100 and n exc 250sq.cm. With or without chamfered angles and flat, splayed, roundd or mitred tops complete all as specified. Note : Design Mix shall be as per approved Design Mix of CWE/CE's running contracts.

Material and labour for fixing only precast reinforced cement concrete precast poles, fencing posts, straining or terminal posts, struts etc. for fencing, aaverage sectional area exc 100 and n exc 250sq.cm. With or without chamfered angles and flat, splayed, roundd or mitred tops complete all as specified. Note :- Material obtained from dismantling here-in-before

Material and labour for Mild steel deformed or twisted bars (TMT) 8/10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody all as directed.

Material and labour for Mild steel Galvanised, (hot dipped galvanised) 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed.

Material and labour for restraining and resecuring including making good staples etc.to existing steel barbed wire all as directed.

Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody all as directed.

Supply only 3.7 mm dia galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages, all as specified.

Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.

Material and labour for restraining and resecuring including making good staples etc.to existing chain link fencing all as directed.

Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 but n exc 22.5cm long and 11 to 15 mm dia. of shank complete all as specified.

Material amd labour for Mild steel bars round bar 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for preparation of new plastered or unplastered surafces of wall and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M/s. MD IRSHAD

R.MANJIT& CO

S B Enterprises

SG ENTERPRISE

samrat saw mill and joinery workshop