Detailed topographic Survey for preparation of detailed site plan, layout plans, L-Section, X section at an interval of 25.00m, leveling etc. using instruments like Electronic Total Station (ETS), Differential Global Positioning System (DGPS), etc.,

Amount

Detailed topographical survey using DGPS and ETS for preparation of detailed site plan showing all existing features like buildings, drains, electric poles, service roads, footpaths, boundary walling etc. on the site plans with suitable colour identifications to a suitable visible scale.

Detailed topographical survey using DGPS and ETS for preparation of detailed site plan for new roads including cross sections, L-section @25m interval as per NABARD norms including identification of structures if any on either sides of road up to 10.50m from the center of road. including submitting the results in both hard and soft copies including all carriage and taxes complete. The job also includes preparation of CBR test reports @ 1no test per km

Preparation of DPR detailed project report as per NABARD/ applicable norms including preparation of detailed volume tables for cuttng and fillng including preparation of cross section with both the proposals of NSLs and FRLs and color print on A-4 paper.

Detailed topographical survey using DGPS and ETS for preparation of detailed site plan for existing roads for upgradation including cross sections, L-section @25m interval as per NABARD norms including identification of structures if any on either sides of road up to 10m from the center of road. including submitting the results in both hard and soft copies including all carriage and taxes complete. The job also includes preparation of CBR test reports @ 2no test per km

Geotechnical investigation for sub soil investigation for evaluation of bearing capacity and other relevant parameters viz liquid limit, plastic limit etc. The job also includes taking of sample with split spoon sampler at site at an interval of 2.00m including preparation of detailed report. The depth of borehole shall be 20m in each case

Complete Geotechnical/soil investigation, with all tests for evaluation of bearing capacity, Viz Plate Load Test for Bridge Structures and preparation of Geo- Technical/soil Report complete as per IRC & MORTH Guidelines. The reaction load is to be included in the rate.

Preparation of DPR of bridge including detailed survey using DGPS and preliminary design, GAD and preparation of detailed topographical map showing existing features within 200mm of proposed bridge site 100m on either side.

Survey of different existing road using FWD falling weight deflectometry for assessing the strength and life of pavement by measuring deflections as per the indian standards and codes including evaluation of different rehabilitation of alternatives. The tests have to be taken at 1m inside the edge of pavement and at 500m intervals on both side including the presentation of analysed data and submission of resulta as of IRC-115-2014.