Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.8 Cr
EMD Value
₹14.8 L
Closing Date
23 Nov 2026, 6:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat (R and B) Division, Navsari
Construction of Major Bridge on Khambhala Navtad Road (V.R. Plan) Ta. Vansda Dist. Navsari
362436
15 of 2026-27
Open
Civil Works - Bridges
Works
Navsari
6 documents required · 6 mandatory
₹18,000
Executive Engineer, Panchayat (R&B) Division, Navsari
₹14.8 L
3 Nov 2026
3 Nov 2026
3 Nov 2026
23 Nov 2026
3 Nov 2026
120 days
No. figures Amount
1 Providing flood gauge marks on sub structure as per design including 8.00 Rmt 156.53
painting as directed etc. complete.
2 Providing masonary steps with cement pointing on approaches as 46.00 Steps 229.91
3 Providing and laying filter media 600mm as directed at the back of 255.00 Smt 1279.97
abutments, returns and wing walls as per detailed specifications etc.
4 Providing and filling sand behind abutment & between returns in layers 929.00 Cum 552.22
as directed.
5 Excavation for foundation in hard murrum and boulders and very stiff 563.00 Cum 613.09
or sticky clays and other similar strata including sorting and strutting
and dewatering as necessary and disposing of excavated stuff as
6 Excavation in large boulders and soft rock by welding including sorting 296.00 Cum 719.06
strutting and dewatering as necessary and disposing off the excavated
stuff as directed.
7 Providing and filling in foundation with ordinary cement concrete M-15 174.20 Cum 3674.07
mix and providing necessary vertical pin headers including formwork,
vibrating, ramming and curing complete.
8 Diversion of water course, providing cofferdam and bund or island as 2.00 Each 20200.00
may be necessary for foundation and maintaining the same for the
period as may be necessary (B) Diversion by cofferdam / island.
9 Empty boring through all sorts of strata for providing 1.20m. diameter 212.00 Rmt. 5863.40
R.C.C. bored piles to required depth including providing necessary
casing pipes with all plants and equipments as required etc. complete
as per specifications.
10 Providing and casting in situ controlled concrete M-35 for R.C.C. bored 240.00 Cum 4937.97
piles of 1.20 M dia. including ramming, vibrating and finishing
excluding reinforcement complete.
11 Providing and fixing in position I.S.I. mark steel bar reinforcement of 181.90 M.T. 73690.30
steel grade Fe-550D T.M.T. CRS for various R.C.C. components as
per detailed drawing including cutting hooking, tying, welding and
including forming the cage and lowering it in position complete for
R.C.C. bored piles, R.C.C. pile cap, Return wall, (A) Abutment cap and
dirt wall (B) Pier cap, R.C.C. Pier, Abutment, Return Wall (C) Side
Wall (A) Solid slab type of superstructure (A) R.C.C Crash Barrier (B)
R.C.C. Kerb (C) R.C.C. Approach slab (D) Wearing coat.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
12 Conducting load testing (Prefer Static load test) of a single pile up to 2.00 No. 35767.11
following capacity in accordance with IS:2911 (Part-IV) including
installation of loading plate form and preparation of pile head or
construction of test cap and dismantling of test cap after test etc. with
all labours, material, tools & plate, equipments, machinery etc.
complete as per drawing and specification, as directed by Engineer.
(Initial load test & Routine load test)
13 Performing Integrity Test (low strain) on vertical pile. The item shall 20.00 No. 1212.00
include chipping of weak concrete at the top of pile, leveling, bending
of reinforcing bars, preparation of pile head including testing with pile
driving analyser or approved equivalent. To be carried out at least
days after concreting of piles. A specialist approved Agency shall be
employed by the Contractor for the test. The test shall be carried out
as per relevant ASTM code.The item is including complete testing with
approved apparatus, analysis of results and conclusions including
submission of test reports in three hard copies with soft copy in CD.
14 Providing and casting in-situ controlled cement concrete M-35 for 292.00 Cum 5137.30
R.C.C. piles cap including necessary form work vibrating, curing and
finishing complete.
15 Providing and casting in-situ design mix concrete M 35 for R.C.C. 180.00 Cum 4871.39
footing for pier, abutment and return wall footing pad for including
necessary shuttering, laying, vibrating, ramming and curing complete.
16 Chipping and dressing of the RCC piles upto cut-off level including 22.62 Cum 932.66
cleaning of reinforcement and removal of dismantled materials etc. for
providing pile caps as directed by Engineer and as per specification.
17 Providing Steel Liner 6 mm thick for pile including fabricating and 8.57 M.T. 47323.74
setting out as per detailed drawing.
18 Providing and laying weep holes in abutment and returns by using 255.00 Each 87.08
A.C. pipes of 100 mm. including laying in proper grade and jointing the
completed as per directed specification.
19 Providing and casting in situ controlled cement concrete M-35 for 270.35 Cum 5476.37
R.C.C. work in abutment, piers & Return wall as per drawing including
centering, shuttering, scaffolding where necessary laying, vibrating,
curing and finishing complete. (A) Height from 0.0 mt. to 5.0 mt.
20 Providing and casting in situ controlled cement concrete M-35 for 22.63 Cum 5797.21
R.C.C. work in abutment, piers & Return wall as per drawing including
centering, shuttering, scaffolding where necessary laying, vibrating,
curing and finishing complete. (B) Height from 5.0 mt. to 10.0 mt.
21 Supplying, fitting and fixing in position true to line and level POT-PTFE 3720.00 M.T. 69.45
bearing consisting of a metal piston supported by a disc or
unreinforced elastomer confined within a metal cylinder, sealing rings,
dust seals, PTFE surface sliding against stainless steel mating
surface, complete assembly to be of cast steel / fabricated structural
steel, metal and elastomer elements to be as per IRC: 83 part-I & II
respectively and other parts conforming to BS: 5400, section 9.1 &
and clause 2006 of MoRTH Specifications complete as per drawing
and approved technical specifications.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
22 Providing and casting in situ controlled cement concrete M-35 mix for 79.00 Cum 5557.35
R.C.C. work in pier cap, abutment cap and dirt wall including
controlled cement concrete M-40 bed blocks or pedestals of required
size below bearings as per detailed drawings including centering,
shuttering, scaffolding wherever necessary laying, vibrating, curing
and finishing complete.
23 Providing and casting in situ controlled cement concrete M-35 for 191.00 Cum 5611.79
R.C.C.work in superstructure including centering, ramming, vibrating,
curing and finishing complete. (A) Deck Slab
24 Supplying, fabrication, assembling of all types of steel girders of 540.00 M.T. 196064.04
specified spans with structural steel conforming to Quality "B0" Grade
Designation E350 conforming to IS:2062, erection / slewing / end
launching of steel girders with cranes or any other approved launching
methods as per site conditions (not requiring traffic block) on
substructure including provision of trolley refuges etc. complete as per
approved QAP and drawings conforming to IRS-B1-2001 and other
relevant codes and specifications. Note: 1. Detailed fabrication and
erection drawings & launching methodology will be prepared by the
contractor and got approved from Department. 2. The rate is all
inclusive including launching in position, complete in all respect except
cost of (i) Painting / Metalising; (ii) Bearings & (iii) HSFG bolts which
shall be paid extra under relevant item. 3. The payment shall be made
on the theoretical weight of main components and gusset plates only.
4. Payment Schedule : (i) Receipt of material at site: 40% (ii)
Fabrication of girders: 20% (iii) Erection/Launching: 20%
(iv) Completion in all respects: 20%. For Bow String /Camel Back
Type Super Structure (Open Web Girder)
25 Providing and casting in situ controlled cement concrete M-40 for 78.00 Cum 5631.25
average 100mm thick wearing coat laid as directed including tamping,
vibrating, finishing, curing and filling in joints with bitumen etc.
26 Provision of an Reinforced cement concrete crash barrier at the edges 156.00 Rmt. 1474.60
of the road, approaches to bridge structures and medians, constructed
with M-40 grade concrete with Fe-550D (HYSD) reinforcement
conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-moulded asphalt filler board, keyed to
the structure on which it is built and installed as per design given in the
enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated
June 1994 as per dimensions in the approved drawing and at locations
directed by the Engineer, all as specified)
27 Providing and casting in situ controlled cement concrete M-30 for Kerb 14.00 Cum 5049.51
including form work, curing and finishing etc. complete.
28 Providing and fixing post and pipe railing as per detailed drawing 201.00 Rmt. 1213.51
including 3 coats of painting to steel works complete.
29 Providing P.V.C. 100mm dia. water spouts including necessary iron 48.00 No. 159.37
grating as per detailed drawing including placing etc. complete.
30 Providing and fixing marble slab including engraving letters, numbers 2.00 No. 1012.65
and painting etc. complete. (A) size 75 cm x 60 cm x 4 cm.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
31 Providing and casting in situ controlled cement concrete M-30 for 41.00 Cum 5330.83
approach slab including form work, curing and finishing etc. complete.
32 Providing and fixing in position Strip Seal type expansion joint catering 30.00 Rmt. 1733.16
to maximum horizontal movement upto 70 mm, complete as per
approved drawings and standard specification to be installed by the
manufacturer / supplier or their authorised representative ensuring
compliance to the manufacturer's instructions for installation.
33 Finishing wall with weather proof exterior emulsion paint on wall 234.00 Sq.m. 117.41
surface (two coats) to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, dust and remains of
loose powdered materials etc. complete
34 Dismentaling the existing structure including removing and stacking 675.90 Cum 932.66
the dismentelled materials as and where directed. (A) R.C.C. work.
35 Earth work for embankment including breaking clods, dressing with all 4519.60 Cum 173.67
lead and lift including watering, rolling and consolidation of sub grade
in layer and consolidation of sub grade in layers at O.M.C. to required
dry density including filling the depressions which occur during the
process using vibratory roller 8 t to 10 t (C) from borrow area within all
lead and lift.
36 Clearing and grubbing of road land including uprooting trunk 0.20 Hect. 28455.10
vegetation, grass, bushes, shrubs, saplings and trees of girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials to be
used or auctioned upto a lead of 1000 meters including removal and
disposal of top organic soil not exceeding 150mm thickness (C) by
mechanical means in area of light jungle.
37 Clearing and grubbing of road land including uprooting trunk 0.56 Hect. 34889.38
vegetation, grass, bushes, shrubs, saplings and trees of girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (D) by mechanical means in area of thorny
38 Earthwork in cutting in all sorts of soil and soft murrum including 669.00 Cum 106.81
conveying and putting the stuff in spoil bank maintaining minimum
distance of five meter between top edge and cutting and toe of spoil
39 Supplying, stacking, spreading & rolling of Hard murrum (100 mm ) on 873.00 Cum 684.58
road side for hard side shoulder of work as per specification including
filling the measure boxes of standard size etc. complete.
40 Construction of granular sub-base (GSB-V) 150 mm thick layer by 316.00 Cum 796.62
providing machine crushed B.T. material satisfying MORT&H
specification (Fifth revision) of Grading V including spreading in
uniform layer with motor grader on prepared surface, mixing by mix in
place method with rotavator at OMC and compacting with vibratory
roller to achieve the desired density etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
41 Providing and laying 250mm thick W.B.M. of Grading-II in two layer 504.00 Cum 1378.35
each of 125mm using B.T.M.C. metal of size 45mm to 63mm in layers
including 13% stone screening 13.2mm size and 7% stone dust as
filler, including spreading, watering and consolidation by vibratory roller
as per MoRTH specifications etc. complete as directed by engineer in
42 Providing and laying priming coat with emulsion SS-1 grade and 1922.00 Sq.m. 103.15
spraying emulsion with spray set fitted on mechanical bouzer using
emulsion at the rate of 7.50 kg/10 smt on WMM surface including
cleaning the surface etc. complete.
43 Providing and laying bituminous base course 37.5 mm thick 292.10 M.T. 3033.24
compacted with tack coat of emulsion grade RS1 at the rate of
Kg./10Sqmt. and using B.T. stone aggregates of required gradation
and asphalt (VG-30) grade for mixing @ 1.99 % by weight of total mix
including heating the aggregate and asphalt by drum mix plant and
spreading the same by paver finisher and consolidation with vibratory
roller including providing all materials, equipments, tools and plants,
oil, kerosene, fire wood, labour charges etc. complete.
44 Providing and laying 50 mm thick compacted B.M. in single layer with 429.10 M.T. 3872.94
B.T. aggregate as per MORT&H specification using emulsion grade
RS1 for tack coat at 2.5 Kg./10Sq.mt. with mechanical sprayer and
bitumen grade VG-30 for mixing at the rate 34.0 Kg/M.T. i.e. 3.4% of
total mix including heating the aggregate and asphalt by batching mix
plant and spreading the same by sensor paver finisher and
consolidation with vibratory roller including providing all materials,
equipments, tools and plants, oil, kerosene, fire wood, labour charges
etc. complete.
45 Providing and laying 25 mm thick SDBC using B.T. stone chips as per 460.00 M.T. 4951.58
MORTH gradation and specification with asphalt VG-30 at the rate of
50.00 kg. / M.Tone of total wt. for mix i.e. (5.00%) by weight of total
mix of bitumen including mixing aggregates & asphalt by continuous
batching drum mix plant & spreading the same by paver finisher
including rolling & consolidation with 10 - 12 tonnes vibratory roller &
providing tools 7 plants, fire wood, oil, kerosene, labour charges using
contractor's own machineries etc. complete.
46 Providing and laying Asphalt painting on B.T. surface with bitumen VG- 6121.50 Sq.m. 48.24
30 at the rate of 5.00 kg/ 10sqm. and spreading stone dust for painting
surface at the rate of 0.03 cum / 10 sqm.
47 Road marking with hot applied thermoplastic paints with reflectorising 408.75 Sq.m. 367.72
glass beads on bitumen surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick including reflectrorising glass
beads @250 gm per sqm area, thickness of 2.5 mm in excluding of
surface applied glass beds as per IRC:35-2015. The finished surface
to be level, uniform and free from streaks and holes zebra patta/bump
patta line/center line/cut patta. The white colour marking should
provide luminance coefficient on cement road shall be min
mcd/m^2/lux and Asphalt road shall be min 100 mcd/m^2/lux during
the service life during the day time .The marking should meet the
performance criteria for night time reflectivity and skid resistance as
mentioned in Section -15 of IRC 35-2015, warranty for retro reflectivity
shall be two years.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
48 Cat Eye/ Road Stud/ RPM :- Supplying of moulded Twin shanks 72.00 No. 217.41
Raised pavement markers made of Polycarbonate and ABS moulded
body and reflective panels with micro prismatic lens (No Glass bead
added) capable of providing total internal reflection of the light entering
the distance and shall support a load of 13635 Kgs. tested in
accordance to ASTM-D 4380 Type H and complying to specifications
of Category - A of MORTH circular No. RW/NH/33023/10-97-DO in Dt.
11.06.1997. The height, width and length shall not exceed 20mm,
130mm and 130mm and width minimum reflective area of
Sq.cm on each side and slope to the base shall be 35 +/- 5 degrees.
The strength of detachment of the integrated cylindrical shaks (of
diameter not less than 19 +/- 2 mm) from the body is to be a minimum
valve of 500 kgf fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy resin based
adhesive as per manufacture's recommendations and the colour of the
marker should be as per the IRC 35-2005 and as directed by engineer
in charge.
49 Direction sign (Junction board) :- Providing and fixing sign boards 8.00 No. 14831.71
made out of 2mm aluminium sheet size 244 x 122cms. rectangle as
per the design of IRC-67-1977 pre treated with phospheting process &
acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro reflective sheeting as
per latest M.O.S.T. specifications, Letters and numerals should be as
per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated
from suitable size iron angle of 50 x 50 x 5mm, 75 x 75 x 6mm as
required; painted with best quality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for each board
shall be as per the instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.
including excavation curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade (VR)
50 Cautionary Warning Sign :- Providing and fixing sign boards made out 6.00 No. 3808.66
of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as
per design of IRC-67-1977. Pre treated with phospheting process &
acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro reflective sheeting as
per latest M.O.S.T. Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x
6mm as required; painted with best quality epoxy coatings in black and
white bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60 cms. for each leg including excavation,
curing etc. complete under the supervision of engineer in charge.(A)
Engineer Grade (VR)
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
51 Informatory Signs :- Providing and fixing sign boards made out of 2mm 3.00 No. 3856.90
aluminium sheet size 80 x 60cms. rectangle as per the design of IRC-
67-1977 pre treated with phospheting process & acid etching; coated
with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro reflective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required,
painted with best quality epoxy coatings in black and white bends. The
details of symbol for each board shall details of symbol for each board
shall be as per the instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg
including excavation curing etc. complete under the supervision of
engineer in charge. (A) Engineer grade (VR)
52 Hazard Marker Sign :- Providing and fixing sign boards made out of 3.00 No. 2423.74
2mm aluminium sheet size 90 x 30cms. rectangle as per the
design/drawing attached (IRC) pretreated with phospheting process &
acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro reflective sheeting as
per latest M.O.S.T. Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x
5mm painted with best quality epoxy coatings The fixing at site shall
be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of engineer in
charge. (A) Engineer Grade (VR).
53 Village name / Bump Ahead sign :- Providing and fixing sign boards 4.00 No. 5045.36
made out of 2mm aluminium sheet size 90 x 60cms. rectangle as per
the design of IRC-67-1977 pre treated with phospheting process &
acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro reflective sheeting as
per latest M.O.S.T. Specifications; Letters and numerals should be as
per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated
from suitable size iron angle of 50 x 50 x 5mm painted with best
quality epoxy coatings in black and white bends. The details of symbol
or inscription / numerals for each board shall be as per the instruction
of engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg including excavation curing etc.
complete under the supervision of engineer in charge. (A) Engineer
Grade (VR).
54 Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 2.00 No. 704.33
including necessary reinforcement as per I.R.C. type design in C.C.
1:4:8 including painting, lettering etc. complete (For O.D.R and V.R.)
55 Providing and fixing Hectometer as per I.R.C. type design including 9.00 No. 356.50
painting, lettering etc. complete (ii) Fixing in C.C. 1:5:10.
56 Providing and fixing Guard stone as per I.R.C. type design including 40.00 No. 225.63
white washing etc. complete (ii) Fixing in C.C. 1:5:10.
57 Supplying and fixing Cat eye made out from Acrilo beautile sterine 205.00 No. 375.72
injuction high compressed molding with reflector made of MMC
(prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous
adhesive 100g. with each unit for fixing. (High Intensity grade)
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
58 Chevron sign :- Providing and fixing sign boards made out of 2mm 12.00 No. 3711.75
alluminium sheet / 4mm ACP (Alluminium composite panel) size 60 x
50 cm rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching, coated with one coat of epoxy
primer and two coats of best quality epoxy paint, reflectorised with
high intensity prismatic grade retro reflective sheeting of Type-4 as per
ASTM D 4956 and latest M.O.S.T. Specifications; 3.3mt. long stand
post of iron angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of 35 x 35 x 3mm
painted with best quality epoxy coatings in black and white bends. The
details of symbol or inscription / numerals for each board shall be as
per the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms for each leg including
excavation curing etc. complete under the supervision of engineer in
charge. A warranty for 7 years for the retro reflective sheeting from
original manufacture & a certified copy of 3 year outdoor exposure test result fro third party test
lab for the product offered shall be submitted by contractor
(A) Class-B Type 4 Retro reflective sheeting.
59 Regulatory / Mandatory signs : Providing and fixing sign boards made 6.00 No. 3439.81
out of 2mm aluminium sheet size 60cms. diameter circle as per the
design of IRC-67-1977 pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro reflective sheeting as per
latest M.O.S.T. specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x
6mm as required; painted with best quality epoxy coatings in black and
white bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60cms. for each leg including excavation curing
etc. complete under the supervision of engineer in charge. (A)
Engineer Grade (VR).
60 Hazard Marker Sign :- Providing and fixing sign boards made out of 4.00 No. 3518.69
2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite panel)
size 90 x 30 cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat
of epoxy primer and two coats of best quality epoxy paint; reflectorised
with High Intensity Prismatic grade retro reflective sheeting of Type-4
as per ASTM D-4956 and latest M.O.S.T. Specifications; 1.8mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of 35 x 35 x
3mm; painted with best quality epoxy coatings in black and white
bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60 cms. for each leg including excavation,
curing etc.complete under the supervision of engineer in charge. A
warranty for 7 years for the retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure test report
from third party test
lab for the product offered shall be submitted by contractor.
(B) Class-B Type-4 Retro Reflective sheeting.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
61 STOP SIGN :- Providing and fixing sign boards made out of 2mm 1.00 No. 4676.06
aluminium sheet size 90 x 90cms. rectangle as per the design of IRC-
67-1977 pre treated with phospheting process & acid etching; coated
with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro reflective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required;
painted with best quality epoxy coatings in black and white bends. The
details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of size
45 x 45 x 60cms. for each leg including excavation curing etc.
complete under the supervision of engineer incharge. (A) Engineer
Grade (VR).
62 Excavation for foundation upto 1.50 mt. depth including sorting out and 516.80 Cum 254.36
stacking of useful material and disposing off the excavated stuff within
all lead and lift for Dense or hard soil.
63 Providing and laying rubble Gabion (each stone weight not less than 630.00 Cum 1067.08
40 Kg) including hand packing and filled in the interstices with quarry
64 Providing and Supplying of Mechanically Woven, Double Twisted, 630.00 Cum 1338.25
Hexagonal wire mesh Zinc+ PVC Coated Gabion boxes, Mesh
opening Type : 10 x 12, Wire dia: 2.7/3.7 mm, Selvedge wire dia:
65 Providing, supplying and installation of 200 GSM Non Woven 360.00 Sq.m. 45.45
Geotextile needle punched, polypropylene material having minimum
roll size of 5 mt. x 100 mt. including all labours etc. complete.
66 Providing and laying rubble pitching of 22.50 cm. thick with filling the 720.00 Sq.m. 632.00
sand in the interstices & C.C. 1:3:6 panelling at 3.0 mt. C/C and
cms. x 30 cms. panel wall as per the detailed drawing with necessary
excavation and providing water chutes of C.C. 1:3:6 at 24.00 mt. C/C
providing pointing on rubble pitching in C.M. 1:3 etc. complete.
67 Providing and erecting a 'W' type metal beam crash barrier comprising 40.00 Rmt. 3496.62
of 3 mm thick corrugated sheet metal beam rail 70 cm above
road/ground level fixed on ISMC series channel vertical post 150 x
x 5 mm spaced 2 mt centre to centre, 1.8 mt height, 1.1 mt below
ground /road level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to confirm to I.S 1367 and I.S 1364, metal
beam rail to be fixed on the vertical post with a spacer of channel
section 150 x 75 x 5 mm, 330 mm long complete as per clause
68 Providing Designing Supplying and Installation of extruded Bi-Axial 1200.00 Sq.m. 111.10
Polypropylene 30 kn GeoGrid including all labours & etc. complete.
69 Providing Designing Supplying and Installation of extruded Bi-Axial 1080.00 Sq.m. 141.40
Polypropylene 40 kn GeoGrid including all labours & etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
70 Metallizing of steel work of girders with sprayed aluminium after 4860.00 Sq.m. 741.65
surface preparation by Sand / grit blasting, aluminium after surface
preparation by Sand / grit blasting, followed by one coat of each primer
(IS:5666) & one coat of paint (IS:2339) with all labour, T&P and
complete job duly conforming to all relevant specifications material as
a and process given under Clause 39 of IRS-B1-2001. Note: Nominal
thickness of sprayed Aluminium coating shall be 150 microns. DFT of
Zinc chrome 25-30 microns and DFT of each coat of Aluminium paint
primer shall be 12-14 microns.
71 Supplying and fixing reinforced concrete heavy duty non-pressure 90.00 Rmt. 3450.30
pipes with collars for culvert carrying heavy traffic as per IS: 458-1991
specifications including setting the pipes in C:M 1:2 watering and
laying (to level or slopes) of class NP3 of following internal diameters
900 mm dia.
72 Supplying and fixing reinforced concrete heavy duty non-pressure 30.00 Rmt. 1968.38
pipes with collars for culverts carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. 1:2 watering and
laying (to level or slopes) of class NP3 of following internal diameters.
(v) 600mm dia.
73 Scarifying gravelled macadam or bitumen macadam surface 6 cm to 225.00 Sq.m. 41.74
10 cm.depth including stacking useful materials on road side and
disposing off remaining stuff.
74 Box cutting the road surface to proper slope and camber for making a 1875.00 Cum 106.81
base for road work including removing the excavated stuff and
depositing on the road side slope as directed upto 50 mt.lead.
75 Construction of Granular Sub Base by providing coarse graded 384.40 Cum 844.24
machine crushed B. T. material satisfying MOST Specification of
Grading - I using 53 mm to 26.5 mm @ 30% (M.C. Metal), 26.5 mm to
4.75 mm @ 60% (M.C. Metal), 2.36 mm below @ 10% (Stone Dust)
including spreading in uniform layer with motor grader on prepared
surface, mixing by mix in place method with rotavator at OMC and
compacting with vibratory roller to achieve the desired density with
C.B.R. > 30% etc. complete.
76 Construction of granular sub-base by providing coarse graded material 316.00 Cum 796.62
grading-II, spreading in uniform layers with motor grader on prepared
surface, mixing by mix in place method with rotavator at OMC, and
compacting with vibratory roller to achieve the desired density,
complete as per clause 401.B
77 Providing and laying 200mm thick W.B.M of Grading-II in two layer 297.00 Cum 1378.35
each of 100mm using B.T.M.C. metal of size 45mm to 63mm in layers
including 13% stone screening 13.2mm size and 7% stone dust as
filler, including spreading, watering and consolidation by vibratory roller
as per MoRTH specifications etc complete as directed by engineer in
78 Providing and filling in foundation with ordinary cement concrete M- 9.60 Cum 3304.02
100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
79 Providing and fixing 20cm. x 15cm x 2.5 cm. thick year plate of marble 2.00 No. 279.69
stone set in C.M. 1:4 including finishing and engraving letters etc.
80 White washing with lime on wall surface (two coats) to give an even 89.14 Sq.m. 12.73
shade including thoroughly booming the surface to remove all dirt,
dust; mortar drops and other foreign matter.
Total Rs.
i.e. Rs. Fourteen Crore, Eighty Lacs, Thirty Three Thousand, Seven hundred Fifty Eight and Sixty Three paisa only
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix
design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate
mentioned in all the tender.
5. Credit for dismantalled materials of amount of Rs. 22304.70 must be recovered from 1st R.A. bill of Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Vansda Navsari Navsari
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
GAD_KHAMBHALA NAVTAD.pdf
GR_2.pdf
GRs _3.pdf
PQ - Major Bridge on Khambhala Navtad Road.pdf
Q.C MANUAL TEST TESTING SCHEDULE.pdf
SBD Book - Major Bridge on Khambhala Navtad Road.pdf
Spe. Conditions - Bridge.pdf
Specification Index.pdf
technical specification for tender navtad.pdf
GRS_1 (3).pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .