Construction of HT ABC OH line and installation of 100KVA DTR in favour of of AEE KWA at JaramColony under Electrical Section Nadathara

Fitting and erecting one HT A type Pole in position incl fitting cross arm, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion

Dismantling one 1x40W fluorescent tube fitting from the existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Providing one Earth using earth pipe incl. digging separate pit at standarddistance away from the pole/structure & backfilling.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place andunloading the same at work site (transport by vehicle).

Installing one DTR Meter with box on existing polesand giving the complete connections incl. conveyance of materials.

Erecting one 100kVA Transformer to existing DP and giving connections, incl.loading & unloading, excluding transportation.

Erection of suspension clamp for 11KV ABC of any size

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials

Doing one cable endtermination on HT ABC of sizes Up to 3x150+1x120 sqmm

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Drilling hole of various sizes on existing Channel/Cross Arm.

Providing Cable Tie

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting one set AB switch and giving connection

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle)

Fitting and erecting one HTPSC Pole in position incl fitting cross arm, digging & back filling pit, drawing earth leads

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Please Enable Macros to View BoQ information