Providing Borewell Facility at SRPL Trichy (Group-B)

Amount

Providing borewell facility at RCP 07

Supply and lowering of 7” ID PVC plain casing pipe confirming to IS-12818 of Finolex (CS grade) or approved equivalent upto requir ed depth in drilled borewell inclusive of cost of transportation, handling, manpower, tools, tackles and hoisting/ lowering as per s ite conditions and as per directions of site engineer.

Supply of 3 HP suitable for bore well of depth max 700 ft, 1-phase, submersible motor-pump set (Aquatex, Texmo, KSB or equivalent) w ith ISI mark suitable for low voltage application, including cost of all tools, tackles, accessories etc., as per directions of site engineer.

Supply of weatherproof starter cum panel board with safety interlocks (single phasing, overload, undervoltage and overcurrent ) incl uding all necessary electronics, wires, terminations, tools, tackles, manpower, transportation, storage etc.

Supply of 3 core, 4 Sqmm (copper flat water proof submersible motor cable conforming to IS-694 (Finolex or equivalent) including all necessary tools, tackles, manpower, transportation, storage etc.

Supply of 14 Sqmm flat water proof submersible motor Nylon Rope (Garware make or approved equivalent) with connectors including all necessary tools, tackles, manpower, transportation, storage etc.

Supply of 25 mm NB (20 kg/cm2) uPVC Column pipes with Wirelocked Coupler of Ashirvad make or approved equivalent including necessar y tools, tackles, manpower, transportation, storage etc.

Supply, laying and terminatin with glanding (including cost of glands at either ends but excluding cost of trenching) 3 core, 4 Sqmm (copper) flexible cable conforming to IS-1554 (Finolex or equivalent) including all necessary tools, tackles, manpower, transportat ion, storage etc.

Supply of Isolation Valve confirming to ISI make

Supply of 15 mm dia Bib Cock (PVC) confirming to ISI make

Supply of 15 mm Elbow (GI) conforming to ISI make

Supply of 15 mm Tee (GI) conforming to ISI make

Supply of 15 mm Socket (GI) conforming to ISI make

Supply of PVC Pipes confirming to IS 4985 Finolex, Jain or equivalent make 25 mm (10kg/cm2) including PVC bends, Tee joints, couplin g etc. Measurement shall be along the center line PVC piping.

Supply of fine river sand sieved and free from pebbles, debris and vegetation including cost of transportation, loading/unloading at site and in trenches as per directions of site engineer.

Supply of bricks (second class) in brick soling over laid cables/pipes in trenches including cost of transportation, loading/unloadi ng at site etc. as per directions of site engineer.

Supply of 1 KL water storage tank of Sintex or Equivalent make including all fittings like float valve, drain plug etc.

Drilling of bore well including cost of mobilization of vertical drilling equipment, machinery, oil, lubricants, all necessary tools , tackles, manpower, transportation complete in all respect as per directions of site engineer.Initial drilling to required depth un til reach of hard rock with required bore for lowering of 7 inch ID casing pipe.

Subsequent to item 160 above drilling with 6” dia bore or as specified by EIC up to a maximum total depth as directed by Engineer-in -Charge as per site conditions.

Trenching and backfilling in all types of soil upto a maximum depth of 600mm and width of 400 mm as directed by EIC for/and laying o f cable / PVC pipes as per directions of site engineer including all civil works, machinery, materials, labour, transport etc. compl ete in all respects

Charges towards connection, installation and commissioning including all civil works, machinery, materials, labour, transport etc. complete in all respects as per the directions of site-engineer for Set of borewell, submersible pump, nylon-rope, cabling, switch b oard and accessories.

Charges towards laying, design, installation, connection and commissioning of water tank along with its piping network, fittings etc . including all civil works like brick work and plastering, materials, machinery, labour etc. complete in all respects as per the di rections of site-engineer.

Supply & installation of PVC Pipes confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be alon g the center line PVC piping.

Supply & installation of PVC coupling confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be a long the center line PVC piping.

Supply & installation of PVC reducer Tee confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall b e along the center line PVC piping.

Supply & installation of PVC elbow confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be alon g the center line PVC piping.

Supplying & planting of saplings (not less than 45cm height) including digging holes at site 60 cm dia and 60 cm depth in ordinary s oil and refilling the same with the excavated earth mixed with manure in ratio 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of manure after reduction of 8%), placing of saplings of species, flooding with water, dressing & maintaining for 30 days including removal of rubbish & surplus earth if any with all lead and lift complete as pe r direction of EIC / Site-Engineer.

Providing and fixing pre-coated Galvanised Iron (G.I.) profiled sheets (size, shape and pitch of corrugation as approved by the Engi neer-in-Charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 MPa steel grade, 5 -7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 2 5 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by th e Engineer-in-Charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cuttin g to size and shape wherever required.

Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including prep aration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, m aterials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into th e sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction o f the Engineer-in-Charge. 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.

Providing borewell facility at RCP 08

Supply and lowering of 7” ID PVC plain casing pipe confirming to IS-12818 of Finolex (CS grade) or approved equivalent upto requir ed depth in drilled borewell inclusive of cost of transportation, handling, manpower, tools, tackles and hoisting/ lowering as per s ite conditions and as per directions of site engineer.

Supply of 3 HP suitable for bore well of depth max 700 ft, 1-phase, submersible motor-pump set (Aquatex, Texmo, KSB or equivalent) w ith ISI mark suitable for low voltage application, including cost of all tools, tackles, accessories etc., as per directions of site engineer.

Supply of weatherproof starter cum panel board with safety interlocks (single phasing, overload, undervoltage and overcurrent ) incl uding all necessary electronics, wires, terminations, tools, tackles, manpower, transportation, storage etc.

Supply of 3 core, 4 Sqmm (copper flat water proof submersible motor cable conforming to IS-694 (Finolex or equivalent) including all necessary tools, tackles, manpower, transportation, storage etc.

Supply of 14 Sqmm flat water proof submersible motor Nylon Rope (Garware make or approved equivalent) with connectors including all necessary tools, tackles, manpower, transportation, storage etc.

Supply of 25 mm NB (20 kg/cm2) uPVC Column pipes with Wirelocked Coupler of Ashirvad make or approved equivalent including necessar y tools, tackles, manpower, transportation, storage etc.

Supply, laying and terminatin with glanding (including cost of glands at either ends but excluding cost of trenching) 3 core, 4 Sqmm (copper) flexible cable conforming to IS-1554 (Finolex or equivalent) including all necessary tools, tackles, manpower, transportat ion, storage etc.

Supply of Isolation Valve confirming to ISI make

Supply of 15 mm dia Bib Cock (PVC) confirming to ISI make

Supply of 15 mm Elbow (GI) conforming to ISI make

Supply of 15 mm Tee (GI) conforming to ISI make

Supply of 15 mm Socket (GI) conforming to ISI make

Supply of PVC Pipes confirming to IS 4985 Finolex, Jain or equivalent make 25 mm (10kg/cm2) including PVC bends, Tee joints, couplin g etc. Measurement shall be along the center line PVC piping.

Supply of fine river sand sieved and free from pebbles, debris and vegetation including cost of transportation, loading/unloading at site and in trenches as per directions of site engineer.

Supply of bricks (second class) in brick soling over laid cables/pipes in trenches including cost of transportation, loading/unloadi ng at site etc. as per directions of site engineer.

Supply of 1 KL water storage tank of Sintex or Equivalent make including all fittings like float valve, drain plug etc.

Drilling of bore well including cost of mobilization of vertical drilling equipment, machinery, oil, lubricants, all necessary tools , tackles, manpower, transportation complete in all respect as per directions of site engineer.Initial drilling to required depth un til reach of hard rock with required bore for lowering of 7 inch ID casing pipe.

Subsequent to item 160 above drilling with 6” dia bore or as specified by EIC up to a maximum total depth as directed by Engineer-in -Charge as per site conditions.

Trenching and backfilling in all types of soil upto a maximum depth of 600mm and width of 400 mm as directed by EIC for/and laying o f cable / PVC pipes as per directions of site engineer including all civil works, machinery, materials, labour, transport etc. compl ete in all respects

Charges towards connection, installation and commissioning including all civil works, machinery, materials, labour, transport etc. complete in all respects as per the directions of site-engineer for Set of borewell, submersible pump, nylon-rope, cabling, switch b oard and accessories.

Charges towards laying, design, installation, connection and commissioning of water tank along with its piping network, fittings etc . including all civil works like brick work and plastering, materials, machinery, labour etc. complete in all respects as per the di rections of site-engineer.

Supply & installation of PVC Pipes confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be alon g the center line PVC piping.

Supply & installation of PVC coupling confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be a long the center line PVC piping.

Supply & installation of PVC reducer Tee confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall b e along the center line PVC piping.

Supply & installation of PVC elbow confirming to IS 4985 Finolex, Jain or equivalent make 15 mm (10kg/cm2) Measurement shall be alon g the center line PVC piping.

Supplying & planting of saplings (not less than 45cm height) including digging holes at site 60 cm dia and 60 cm depth in ordinary s oil and refilling the same with the excavated earth mixed with manure in ratio 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of manure after reduction of 8%), placing of saplings of species, flooding with water, dressing & maintaining for 30 days including removal of rubbish & surplus earth if any with all lead and lift complete as pe r direction of EIC / Site-Engineer.

Providing and fixing pre-coated Galvanised Iron (G.I.) profiled sheets (size, shape and pitch of corrugation as approved by the Engi neer-in-Charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 MPa steel grade, 5 -7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 2 5 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by th e Engineer-in-Charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cuttin g to size and shape wherever required.

Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including prep aration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, m aterials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into th e sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction o f the Engineer-in-Charge. 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.

SAJAL ENGG CONSULTANTS

SHRI HARI CONSTRUCTIONR

SRI VINAYAGA ENGINEERING CONTRACTORS