Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | ₹14.4 L | L1 | Accepted-AOC lowest bidder |
| 2 | L2₹15.5 LRejected-AOC | ₹15.5 L | L2 | Rejected-AOC second lowest bidder |
| Sl No | Description | Qty | Unit | Trious electrical services L1 | FARADAYS ELECTRIC WORKS L2 |
|---|---|---|---|---|---|
| 1.00DRW-2025-WSS to Erumely Kodithottam. | |||||
| 1.00 | OD237082/2025-2026:1.Supply and erection of C/F pump set with the following specifications. Supply erection testing and commissioning of KWA prequalified reputed make horizontal split case centrifugal pump set with double entry bronze impeller, stainless shaft, CI casting with guard foundation bolts % nuts complete suitable coupling the pump and motor above the basement etc. complete supported by anti-friction bearing including providing suitable concrete foundation including cost of cement, sand and mental etc complete duty condition is as follows Discharge -8.68 lps Total head- 120m Impeller - Bronze LTB 2 Double entry Pump Shaft- 304 Stainless steel suction head 3Mts Foot valve frictionless CI make
2. Supplying, erection testing and commissioning of KWA prequalified reputed make horizontal solid shaft foot mounted TEFC/SPDP squirrel cage induction motor suitable for direct coupling with the above pump to operate on voltage of 440 Volt (+/- 10 %) 50 HZ, (+/- 3%) AC 3 phase, 50 degree Amp. temp, Class F insulation, IP 22/23 degree of protection, with all standard specifications conforming to relevant IS325 and CEA regulation Efficiency: more than 70% (Motor shall be energy efficient and supporting certificates to prove IE2/IE3 as per IS12615-2018 - 1set
3. Supply erection, testing and commissioning of air cooled resin cast auto transformer with MNX contractor having 40,60,80 % tapings with suitable chamber filled with insulating oil, combined with powder coated 2 mm thick steel sheath dust and vermin proof floor mounted control cubical panel associated with in/out cable entry boxes for accommodating the following parameters for controlling functions of the fully automatic auto transformer starter suitable for above motor- L&T or equivalent reputed co. make MNX 200 contactor unit- L&T or equivalent Co make MNX 95 contractor unit- Timer and supervisory trip relay, OV/UV control relays Maniac or equivalent Co make single phasing preventer AVF digital meter 1 No. and selector switch - ON/OFF, trip & 3 phase indication lamps, digital or numerical motor protection relay power circuit wiring with 20 x 4 mm PVC sleeve insulated copper bar and 2.5 sq.mm control wiring- following parameters should be provided in panel Resin cast type auto transformer with chamber 200amps MCCB with rotating handle and spreader 1 set 165 amps MNX air break contractor- 1 No. 125 amps MNX air break contractor- 2 No. Digital motor protection relay suitable with suitable type wire wound Ct for 3 phases - 1set AV meter, Ammeter-1 each LED panel lamps, ON,OFF trip lamps and push button switches
4. Supply erection, suitable type cubical floor mounted MS fabricated with dust and vermin proof cubical type panel board 16 SWG sheathed and power coated consisting of suitable size 1 No.200A MCCB or equivalent for incomer and 2 Nos 160 A MCCB or equivalent outgoing MCCB rare interlocking with each other providing copper/Aluminium bus bars inter connect the above MCCBs and fitted with 3 Nos RYB LED pilot lamps Analog type 100mm size Voltmeter. Provided common earth bench for earth line the entire panel as per CEA regulation The panel fitted common base frame on suitable foundation. Necessary bus bar arrangement with internal cabling for operating pump set - 1 set
5.Supply and laying of size 3.5C x 120 sq.mm PVC XLPE 1.1 Gr insulated armoured Aluminium conductor cable length 10m for each set conforming to relevant IS for giving power connection starter to motor , starter capacitor etc. complete as per standards including end termination materials as per CEA regulation(extra length if required excluded) - 10 Meters
6.Supply of all Materials laying, 25x6 mm copper conductor with required materials for earthling the motor, starter, capacitor etc as per CEA regulation Providing plate earthling using 1200mm x 1200mm x12 mm size CI earth plate buried against at a depth of 3.00m from ground level with alternate layers at charcoal and salt including supplying fixing at 38mm dia perforated GI pipe funnel for water purpose etc. Including the construction of masonry through with man hole cover per CEA regulation. - 1set
7.Supply and fitting of reputed make ISI marked capacitor conforming to IS 2834 (relevant IS) suitable for above motor for working with unity power factor - Set
8.Supply and fitting of suitable size best quality ISI marked heavy duty cast iron double flanged sluice valve PN 1.6 suitable for above pump set - 1 Nos
9. Supply suitable size best quality ISI marked heavy duty cast iron double flanged reflex non return valve as per PN 1.6 suitable for above pump set - 1 Nos
10.Supply reputed make 150mm dia Fluid filled pressure gauge with Regulator cock and all accessories suitable for the above pump set - 1 Set
11. Supply and fitting of suitable size best quality MS pipe of thickness not less than 8mm and total length of 10Mts suitable for above pump set and suitable size of foot valve and connecting the suction pipe and delivery pipe valves with suitable flanges nut and bolts IR sheet etc complete and connecting the delivery side of pump with the valves and suitable specials to connect the pump set with pumping main and erection of the motor pump set, starter panel boards, capacitors etc. on suitable concrete foundation giving power connecting cables to panel board to starters, starter to motor, capacitors, providing end termination, earthling of equipment supply fitting necessary interconnection and fabrication etc. complete taking trial run to be satisfaction of departmental officers including any other works and cost of materials required for the commissioning of the motor pump set as per standards. - 1set .The pump set must be provided with all sort of protection. Required length of cable (out of 24 meter from supply) for connection works shall be supplied by Contractor | 2 | 1 nos | 7,00,279 ₹14.0 L | 7,50,000 ₹15 L |
| 1.00 | OD282951/2025-2026:Supplying 5 KVAR HD BOX CAPACITOR 440V | 4 | no | 1,671 ₹6,684 | 1,950 ₹7,800 |
| 1.00 | OD282952/2025-2026:Supplying 10KVAR HD BOX CAPACITOR 440V | 5 | no | 2,933 ₹14,665 | 3,200 ₹16,000 |
| 1.00 | OD282953/2025-2026:Supplying 15KVAR HD BOX CAPACITOR 440V | 5 | no | 4,196 ₹20,980 | 5,000 ₹25,000 |
Updated dates
Tender Value
₹15.1 L
EMD Value
₹37,766
Closing Date
12 Mar 2026, 11:00 amClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER P H DIVISION, KOTTAYAM
Supplying and Providing CF pump set with head 120m and discharge 8.68 lps at MES Plant Erumely
2026_KWA_840532_1
WRD/KWA-CE(SR)/TR/4428/2025
Open Tender
Civil Works - Water Works
MES Plant Erumely
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
Yes
₹37,766
Yes
19 Jun 2026
25 Feb 2026
13 Mar 2026
25 Feb 2026
12 Mar 2026
25 Feb 2026
DRW-2025-WSS to Erumely Kodithottam.
OD282951/2025-2026:Supplying 5 KVAR HD BOX CAPACITOR 440V
OD282952/2025-2026:Supplying 10KVAR HD BOX CAPACITOR 440V
OD282953/2025-2026:Supplying 15KVAR HD BOX CAPACITOR 440V
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1417008.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.04 MB
Tendernotice_2.pdf
PDF • 1.65 MB
Tendernotice_3.pdf
PDF • 0.56 MB
BOQ_1417008.xls
BOQ • 0.30 MB
SBD.pdf
Tender Documents • 1.64 MB
Specialconditions.pdf
Additional Documents • 0.54 MB
NIT.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid