REPAIR/REPLACEMENT TO JOINERY, TILES, SANITARY/WATER SUPLY FITTINGS, FALSE CEILING AND MISC WORKS IN ZONE VIII AND IX UNDER AGE B/R-I AT GE (WEST) BAREILLY.

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed

S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S & F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

M & L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) Rate for filling PCC in frame deemed to be included in quoted rates (iii) MS Grill, glass and wire mesh shall be measured and paid seperatly under relevant item of schedule

S&F steel ventilator with top hang shutters with pressed steel frames including hinges, steel peg stay in repairs complete all as specifed and directed.

S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F for 125 mm long D shaped Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F for 100 mm long medium weight, cold rolled stainless steel Butt hinges with steel screws complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repair 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F in repair 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F in repair 250mm long aluminium sliding door bolts plate type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S & F in repairs 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S & F in repair mild steel 300 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty or wooden/aluminium beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F Figured glass, 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F plain glass, 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads n exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all specified and directed.

M&L brickwork with old size fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar complete all specified and directed.

M&L Brickwork old size with subclass ‘B’ bricks, except brick straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including taking down old plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement including taking down plaster from ceiling and scrubbing down with water etc complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces and applying Two coats of Oil bond distemper over a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying Two coats of Cement based paint of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of Cement based paint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of oil bound distemper with roller of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of oil bound distemper with roller of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of white wash complete all as specified and directed.

M&L for two coats of birla white putty or JK wall putty avg 2mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed.

M & L for complete removal of old finishes from walls by scrapping, rubbing down, washing etc. complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone 18-20 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing all as specified and directed.

M&L for 15-18mm thick granite (approved colour by GE) stone for floor, steps, jambs, pillars, window cills, cooking platform and like machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges and polishing over and including 20mm thick screed in CM 1:6 complete all as specified and directed

M&L for Non - skid designer coloured ceramic tiles7 to 8 mm thick including borders tiles (square/ rectangular) area of each tile exceeding 0.16 sqm but not exceeding 0.36 sqm laid on floor surface jointed and pointed with coloured cement to match including 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directed.

M&L for Non - skid designer coloured ceramic tiles7 to 8 mm thick including borders tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement to match including 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directed.

M & L for non- skid designer ceremic coloured tiles 7 to 8 mm thick including borders tiles (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of floor or wall tiling and 15mm thick screed bed in cm-1:6 all as spd or as directed.

M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300x200 mm jointed and pointed with coloured cement to match including 10 mm thick rendering of cement mortar 1:4 and dismantling of tile including cement mortar bedding complete all as specified or as directed.

M&L for coloured Border Glazed designer heighliter printed tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 600x300 mm jointed and pointed with coloured cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of tile including cement mortar bedding complete all as specified or as directed.

M&L for Vitrified tiles designer (light shade) 8-10 mm thick including borders tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiles complete all as specified and as directed.

M&L for Vitrified tiles designer (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick rendering in cm 1:6 including dismantling existing tiles complete all as specified and as directed.

M&L for Vitrified tiles designer (light shade) 8-10 mm thick including borders tiles (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 Sqm as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in CM 1:6 including dismantling existing tiles complete all as specified and as directed.

M&L for Vitrified tiles designer (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.72 sqm each in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick rendering in cm 1:6 including dismantling existing tiles complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for plain cement concrete, type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor /paving etc complete all as specified and directed.

M&L for Plain Cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate , in flinth protection 75mm thick finished even and smooth without using extra cement including making joint 10-12mm wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed.

S & F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position incl dismalting of existing tankand any description all as specified in SSR Part I complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 20mm dia tubes complete all as specified and directed.

Taking down & Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed

Taking down & Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed

S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repair 15 mm bore Bib cock with wall flange and aerator,brass chromium plated with fancy type and screwed down to 15mm bore GI tubing or for brass ferulecomplete all as specified and as directed. Make Jaquar CON-047KN/ Kohler K-16093 IN-4-CP/Grohe-20280000,

S&F in repair for C P long body Bib taps complete all as specified and as directed

S&F in repair health faucet 1 mtr SS Braided connection tube with wall hook complete for EWC incl necessary fitting complete all as specified and directed. Make Jaquar ALS-565/Kohler K-77364-IN-CP/Grohe-26355110,

Supply & Fix in Repair plastic seat cover for EWC closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Make Jaquar CPA-chr-1171/Kohler K-5636-IN-CP/Grohe-40799001/

S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed. Make Jaquar CQT-23167B/ Kohler K-8620-IN-CP /Grohe-32734000,

S&F in repair for C P Wall mixer with provision for overheadshower with 115 mm long bend pipe on upperside connecting legs and flags complete all as specified and as directed

S&F in repair for C P Sink mixer with short Swinging spout with connecting Legs and wall flanges complete all as specified and as directed

S&F in repair fancy type stainless steel brass chromium plated towel rail size 600mm long including a pair of brass bracket complete all as specified and directed. Make Jaquar (CAN-1111SM) / Kohler K-25348IN-AF / (Grohe -40366001,

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. Make Jaquar CAN-11535/Kohler K-5633-IN-CP/Grohe -40367001/

S&F in repairs 20-25 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..

S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed.

S&F in repairs Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed..

S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 250mm fixed complete all as specified and directed.

S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.

S&F in repairs vitreous china full stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed. Make Jaquar- URS-WHT-13261H, Kohlelr K-4991-ET-O/Gorhe -39438000/

S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.

Taking down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Repairing of aluminium door/window etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed.

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fix Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified.

S&F in repairs Powder coated anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed.

S&F in repairs Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) fixed in vertical position with aluminium vertical members and specified thick tinted glass including rubber beading and aluminium glazing clips complete all as specified.

S&F Aluminium partition frame work anodized powder coated frame of size 62.5 mm x 37 mm x 2.5 mm thick with bottom & middle rail of section 62.50 mm x 37 mm x 2.5 mm thick and styles, top rail of section 62.50 x 37 x 2.5 mm thick including jointing cleats, fixing of glazing with 5.5 thick ordinary plain glass or 5 mm aluminium composit panel including taking down old existing partition work including necessary fittings fixtures complete all as specified.

S&F for in repairs Aluminium body(die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. in repairs complete all as specified and directed.

Supply and fix in repair 140mm long Floor door stopper made of double Aluminium rod and hard rubber shoe fixed with steel screws complete all as specified and directed.

S&F tinted sheet glass 5.5mm thick, pin head type in squares exc 0.5 sq. m in each pane in Aluminium window,door and partition wall complete all as specified and directed.

S&F Prelam hollow PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10" between two PVC strips. A strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be stuck at the places where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed.

S&F Vitreous china wash down water closet single/one piece with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed. Make:- Kerovit Cat Part No: INSIGNIS KS710, Hindware Cat part No.- 92573, CERA CAMPBELL Cat No S1013109/11 & Asian paints Cat Part No OP-30-TFS.

S & F in repairs sensor fitted urinal pot with complete filushing valve for urinal with complete set with installation box complete all as specified and directed.

S&F in repairs vitreous china full stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed. Make Jaquar- URS-WHT-13261H, Kohlelr K-4991-ET-O/Gorhe -39438000/

S & F in repairs Vitreous China Ware Wash hand basin counter top, size 565x450x195mm including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and other fixing arrangement complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

shiv shakti contractor (BID ID -3360051)

M/S S&R Construction (BID ID -3360939)

REHAN CONSTRUCTIONS (BID ID -3361275)