Renovation Work of Sardar Patel Statue at Mansa , for Mansa Nagarpalika, Mansa, Dist Gandhinagar

Name of Work : - Renovation of Sardar Patel Statue at Mansa, For Mansa Nagarpalika, Mansa, Ta- Mansa, Dist-

ITEM OF WORK QTY Unit Total Rate Amount

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with

all lead and lift up to 1.5 km (ii) In Cement Mortar.

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing of the excavated

2 stuff upto any lead any kind of soil. 18.00 Cumt 123.13

Filling available excavated earth (excluding rock)in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

3 depth consolidating each deposited layer by ramming & watering. 18.00 Cumt 136.92

Filling in foundation and plinth with murrum or selected soil in

layer of 20 cm thickness including watering ramming and

4 consolidating etc. complete. 7.00 Cumt 277.14

Providing & Laying cement concrete 1:3:6 (1cement: 3 Coarse

Sand: 6 hand brocken stone aggregate 40 mm nominal size) and

curing complete execluding cost of form work in (A)Foundation

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding the

cost of reinforcement for reinforced concrete work in foundation,

footings base of column and mass concrete (A) Footings

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and excluding the

cost of reinforcement for reinforced concrete work in (D)

7 Columns, Pillars posts and struts, upto floor two level. 15.00 Cumt 8246.65

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

8 reinforcement for reinforced concrete work in (C) 15.00 Cumt 5989.30

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto

9 floor two level 7625.00 KG 77.29

ITEM OF WORK QTY Unit Total Rate Amount

Providing and constructing brick work using common burnt clay

building bricks having crushing strength not less than 35 kg/sqcm.

10 in foundation and plinth in cement mortar 1:5 (1 cement :5 fine 9.00 Cumt 4244.85

sand) etc. comp.(B) Conventional

20 mm thick sand faced cement plaster on wall upto all floor

hight above ground level consisting of 12mm thick backing coat

11 of c.m. 1 :3 (1 cement : 3 sand) and 8 mm thick finishing coat of 59.00 Sqmt 315.69

c.m. 1 : 1 (1 cement : 1 sand) etc. complete

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

12 thoroughly brushing the surface to remove all dirt, and remains of 59.00 Sqmt 120.26

loose powdered materials.etc complete

Providing and fixing M.S. ORNAMENTAL GRILLS (Window

grill/entry gate/compoundwall grill) of required pattern with at

required spacings and frame alround, square or round bars, in

columns, beams and joists, channels, MS flat, Angles, Pipes, tees

flats with connecting plates or angle cleats Steel work welded, in

13 built up sections framed work including cutting, hoisting, fixing in 1400.00 KG 150.49

position and with one coat primer & two coat oil paint as per

detail drawings etc. complete. at any lead and lift etc. complete.

As directed by EIC.

Provide, Supply and Lying of Premium-grade, non-slip 4x4 inch

(100x100mm) natural granite pavers for external flooring must

feature a flamed or bush-hammered finish, a minimum thickness

of 50mm to withstand vehicular loads, and a water absorption

rate under 0.4% to ensure long-term weather durability with

pattern laying guide by enginner incharge.

Filling with good earth for plantation including watering , ramming

and consolidation etc complete as per directed by engineer in

15 charge. 29.00 Cumt 80.80

Providing & laying new Australian lawn including ColourFull

Patternt planting mehandi (Lawsonia inermis) in line as per

16 directed by Nagar Palika. 24.00 Smt 454.5

Painting one coats (excluding priming coat) on previously painted

steel and other metal surface with enamel paint, brushing to give

17 an even shade including cleaning the surface of all dirt, dust and 38.00 Smt 57.64

other foreign matter.

Painting two coats (including priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and

18 other foreign matter. 38.00 Smt 128.62

ITEM OF WORK QTY Unit Total Rate Amount

Providing and fixing with hole fast Jesalmer stone for Dedo

red/yello/pink shed 30 mm to 50 mm thick including with carving

15mm to 25mm finishing, levelling completed and filling the joint

with epoxy/slary material in proper as per directed by eng. in

Side Wall Painting or 3D Painting Wall painting (two coats)

natural /artificial art or 3D picture on surface to give an required

shape even shade including throughly brushing the surface free

20 from mortar droppings and other foreign matter and sand 70.00 Smt 565.6

papered smooth to remove all dirt, and remains of loose as per

directed by engineer in charge.

provide,Supply and Fixing of a custom glass mosaic design

depicting a indian map and akhand bharat , including surface

preparation, precision fixing with high-grade adhesives, and

seamless grouting to ensure a durable, weather-resistant

aesthetic finish on wall with directed by engineer incharge

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non

integral suitable Driver complete cat-III 115.00 Rmt 220.18

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

23 erected as directed.

(h) 2.50 Sq.mm 3 core round PVC sheathed 60.00 Mtr 97.97

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia