Construction of First Floor Office Room At BLT EC Bheden District Bargarh

Earthwork in excavation of foundation in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the Engineer In Charge.

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P etc. complete as per specification and direction of the Engineer In Charge.

Cement Concrete (1:3:6) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work including watering & curing, etc. complete as per the direction of the Engineer In Charge.

Reinforced Cement Concrete (M20 grade) with 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,required for the work etc. complete as per specification and direction for the Engineer In Charge.

Column base in Ground Floor.

Plinth Bend

Column in superstructure/ Beams (Ground Floor)

in St. case (Ground Floor)

Reinforced Cement Concrete (M20 grade) with 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,required for the work etc. complete as per specification and direction for the Engineer In Charge.

in St. case (First Floor)

Column in superstructure/ Beams (First Floor)

Column in superstructure/ Beams (Second Floor)

Lintal Bend (First Floor)

Lintal Bend (Second Floor)

Chajja (First Floor)

Chajja (Second Floor)

Roof Slab (First Floor)

Roof Slab (Second Floor)

Supplying, fitting and placing MS round/ deformed/ tor steel HYSD bar reinforcement of only of approved manufacturing companies of approved grade of required diameters of approved quality complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engineer In Charge.

Ground Floor.

First Floor.

Second Floor.

Providing Fly Ash brick masonry in cement mortar (1:6) in superstructure for 9 " thick wall F.A bricks of size using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. complete as per the direction of the Engineer In Charge.

First Floor.

Second Floor.

12mm thick cement plaster (1:6) to out side of brick walls surface after racking out the joints…curing and watering with all cost etc.complete

First Floor.

Second Floor.

16mm thick cement plaster (1:6) to inside of brick walls surface after racking out the joints…curing and watering with all cost etc.complete

First Floor.

Second Floor.

6 mm thick cement plaster (1:4) to CC surface including closed deep chipping and cleaning to C.C. surface to receive cement plaster,watering and curing etc.complete with cost,conveyance,royalities,all taxes and cost of all materials and cost of all labour with T & P required for the work complete.

20 mm thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning surface by wire brushes,watering and curing etc.complete with cost,conveyance,royalities,all taxes and cost of all materials and cost of all labour with T & P required for the work complete.

First Floor.

Second Floor.

Supplying,fitting,fixing of Vitrified Tile in floor plain Ivory (Premium grade of size 600 X 600mm)in floors,treads,steps and landing slab on 25mm tchick bed of cement mortar (1:1) joined with neat cement slurrry mixed with pigments to match the shades of the tiles including,rubbing and polishing the surface etc.complete

Grond Floor.

First Floor.

Supplying,fitting,fixing of Vitrified Tile plain Ivory (Premium grade of size 600 X 600mm)in dados skirting and riser steps on 12 mm tchick bed of cement mortar (1:3) joined with neat cement slurrry mixed with pigments to match the shades of the tiles including,rubbing and polishing the surface etc.complete

Grond Floor.

First Floor.

Supplying,fitting,fixing of Ceramic Floor Tiles of size (30cmX30cm/40cmx40cm) in )in floors,treads,steps and landing slab on 25mm tchick bed of cement mortar (1:1) joined with neat cement slurrry mixed with pigments to match the shades of the tiles including,rubbing and polishing the surface etc.complete

Supplying,fitting,fixing of Ceramic Wall Tiles of size (20cmX30cm/20cmx20cm) in )of skirting in all dadoos of treads,steps and landing slab on 12mm tchick bed of cement mortar (1:3) joined with neat cement slurrry mixed with pigments to match the shades of the tiles including,rubbing and polishing the surface etc.complete

Supplying,fitting,fixing of M.S. angle Iron Door with frame made out of 35 X 35 x5mm M.S. Angle with required Nos. of hinges and steel shutter made out of 25 X 25x3 mm M.S.Angle frame fitted with 20 gauges G.P. Sheet & welded with aldrop,handle,hold fast etc.Complete and with cement concrete (1:3:6) including cost,conveyance,royality,taxes,labour, T& P etc.Complete as per direction of the Engineer-in-charge.

Supplying,fitting,fixing in all floor M.S. angle Iron Window grill made outup 25x 5mm M.S. flat with 10mm dia sqare bar fixed in Horizontal & Vertical crital frames of approved design ncluding drilling holes & screw in windows with all cost of & labour T & P complete in all respect as per direction of the engineer -in-charge

Supplying,fitting,fixing up window (sliding type)made up aluminum section 151-154,151-155, as windows frame section no.151-155,151-153 and 151-157 as shutter frame with 5mm thick blavk glass as panel fitted with rubber beading including locking arrangement including all fitting and including cost of materials and cost of all labour with T & P etc.complete as [er direction of Engineer- in-charge.

AI. Sec Frame

5 mm thick black glass

Supplying, fitting and placing of stainless steel of 304 grade in hand railing using 50mm dia of 2 mm thick circular pipe with Balustrade of size 32mm X 32mm X 2 mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32 mm X 32mm X 2 mm in 3 rows in stair case as per approved design and sprcification, buffing, polishing etc with cost , conveyance taxes of all materials, labourT&P as per direction of Engineer In Charge.

Ground Floor

First Floor.

Providing and fixing of factory made PVC door with frame & all necessary hard ware fittingss fixed to the wall using M.S. screws including all cost,covenyance & taxes of materials etc.complete as per direction of the department.

Emulsion Paint 2 coats over one coat of wall primer with any approved shade over the interior surface of walls etc.completed as directed by the Engineer-in-charge using distemper including cost,conveyance of all materials including cost of distemper with all taxes and cost of all labour with T &P required for the work etc.complete in all respect.

First Floor

Second Floor.

Painting 2 coats with weather coat of approved shade over a coat of wall primer by means of brush to outside surface of walls after cleaning the surface including cost of material with all taxes and cost of all labour with T & P required for the work etc.complete in all respect.

Ground floor

First Floor.

Second Floor.

Enamel painting two coats in all floors (over one coat of with primer)to new wood and iron work including sand papering polishimng the surface including cost,conveyance,royalities,all taxes and cost of all materials and cost of all labour with T & P required for the work including cost of paints and primer complete in respect.

First Floor.

Internal Electrical Work

Recresed wiring to light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated single standard multistandard copper conductor of ISI marked and ceilling rose ISI marked mounted on MS box having front modular cover of suitable size MS modular box with 1.0 sqmm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer In Charge.

Group A

Group B

Group C

Recessed wiring to 5/6 amp Plug point in 20mm dia non metalic flexible polytene conduit with 1.5 sq mm FR PVC insulated single core multistrand copeer conductor of ISI marked with 5 Amp,250 V piano type switch ISI marked

S/F of 5/6A Switch & 3 pin 5/6A Socket on existing board

Writing to circuit/sub main writing along with earth wire with the following sizes of PVC S/C multistrand copper wire in recessed.

2 X 1.5 sq mm + 1 x 1.5 sq mm

2 X 2.5 sq mm + 1 x 1.5 sq mm

2 X 4 sq mm + 1 x 1.5 sq mm

S/F of BK angle holder with out bulb

S/F of 40 w LED Treet light fitting

S/F of 9w LED lamp

Supply, Installation, Testing and Commissioning of 48 inch ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer in charge.

S/F of electronic fan regulator step type

Installation, testing and commissioning of exhaust fan 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer in charge.

Fixing charges of Exhaust fan

S/F of 32 Amp DP main switch

Providing & Earthing with G.I/Copper earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete. as per Govt specification

S/F of 4 Nos.single pole MCB on 4 way double door DB box

S/F of 20W LED flat fiting with all accessories (Surya)

S/F of 6 sq mm service wire

Internal PH Work

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.

20mm dia PVC ASTM pipe (sch-80)

25mm dia PVC ASTM pipe (sch-80)

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

15mm dia CP angle stop cock

15mm dia CP Bib cock

15mm dia CP Long Body Bib cock

15mm dia CP Pillar cock

20mm dia CP consealed stop cock

25mm dia brass full way valve (Shakti make)

15mm CP Extension piece

125mm CP grator

15mm size C.P. flange

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Vent Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

580mm size Orissa pan (Hindware/Parryware/Neycer make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )

Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

550mmx400mm Wash basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Please Enable Macros to View BoQ information