Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹3.0 L
Closing Date
19 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Navsari (R&B) Division, Navsari
Construction of C-Type 8 Unit Revenue Staff Quarters at Gandevi, Ta. Gandevi, Di. Navsari
364125
24 of 2026-27
Open
Civil Works - Buildings
Works
Navsari
9 documents required · 8 mandatory · 1 optional
₹6,000
Executive Engineer, Navsari (R&B) Division, Navsari
₹3.0 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
19 Nov 2026
6 Nov 2026
90 days
Construction of C-Type 8 Unit Revenue Staff Quarters at Gandevi,Ta. Gandevi, Di. Navsari
BILL OF QUANTITIES
Percentage Rate Tender
Item Description of Item Quantity Unit Rate In Amount
1 Excavation for foundation upto 1.5 m depth 846.50 Cumt 119.63
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
50 Meter lead.(A) Loose or soft soil
2 Excavation for foundation for depth from 1.5 m to 513.50 Cumt 166.35
3.0 m including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
50 Meter lead.(B) Dense or Hard soil
3 Filling in foundation and plinth with sand in layers 15.50 Cumt 471.69
of 20 cm. Thickness including watering ramming and
consolidating etc. comp.
4 Filling available excavated Earth (Excluding Rock) in 790.00 Cumt 133.65
trench plinth side of foundation . in layer not
excluding 20 cm in depth consolidation each
deposited layer by ramming and watering etc.
5 Filling foundation and plinth with murrum or 9.50 Cumt 296.29
selected soil in layer of 20 cm in thickness including
ramming watering and consolidating etc. complete
6 Applying general insecticide pest control treatment 234.00 Sqmt 51.52
to floors, cupboards etc including labour materials
etc. complete. Using Imidacloprid 30.5 SCas Per IS
6313 part -II( (0.075% concentration by mass) is
recommended 10.5ml chemical diluted with 5 liters
of water application 0.5 litre chemical /Sqm of
surface is recommended as per I.S.
7 Providing and laying cement concrete 1:3:6 (1- 15.00 Cumt 3080.90
Cement : 3- coarse sand : 6- machine cut stone
aggregates 40 mm nominal size) and curing
complete excluding cost of formwork in (A)
Foundation and Plinth
8 Providing and laying controlled cement concrete 167.00 Cumt 4141.13
M150 for curing complete including cost of Plywood
formwork but excluding the cost of reinforcement
for reinforced concrete work in (A) Foundations,
footings,Base of columns, Plinth Slab and Mass
9 Providing and laying controlled cement concrete 195.42 Cumt 4548.99
M250 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (A) Foundations,
footings and Mass concrete. Footing
10 Providing and laying controlled cement concrete 23.00 Cumt 7254.15
M250 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts Column Up to
Item Description of Item Quantity Unit Rate In Amount
11 Providing and laying controlled cement concrete 29.00 Cumt 7204.77
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts Ground Floor
12 Providing and laying controlled cement concrete 12.50 Cumt 7204.77
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts First Floor
13 Providing and laying controlled cement concrete 12.50 Cumt 7245.30
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts Second Floor
14 Providing and laying controlled cement concrete 12.50 Cumt 7285.83
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts Third Floor
15 Providing and laying controlled cement concrete 12.50 Cumt 7326.36
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts 4th Floor
16 Providing and laying controlled cement concrete 7.00 Cumt 7366.89
M200 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts 5th Floor
17 Providing and laying controlled cement concrete 47.00 Cumt 6154.36
M250 and curing complete including the cost of
Plywood form work but excluding the cost of
reinforcement for reinforced concrete work in
Ground & Plinth BEAMS
18 Providing and laying controlled cement concrete 47.00 Cumt 5582.17
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Plinth Slabs
19 Providing and laying controlled cement concrete 24.00 Cumt 6114.67
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Ground Floor Beams
20 Providing and laying controlled cement concrete 28.00 Cumt 6114.67
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) First Floor Beams
21 Providing and laying controlled cement concrete 28.00 Cumt 6155.20
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Second Floor Beams
Item Description of Item Quantity Unit Rate In Amount
22 Providing and laying controlled cement concrete 28.00 Cumt 6195.73
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Third Floor Beams
23 Providing and laying controlled cement concrete 28.00 Cumt 6236.27
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Fourth Floor Beams
24 Providing and laying controlled cement concrete 5.50 Cumt 6276.26
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in ©5th Floor Beams
25 Providing and laying controlled cement concrete 1.00 Cumt 6270.87
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Chhajja for First
26 Providing and laying controlled cement concrete 1.00 Cumt 6311.40
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Chhajja for Second
27 Providing and laying controlled cement concrete 1.00 Cumt 6351.93
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Chhajja for Third
28 Providing and laying controlled cement concrete 1.00 Cumt 6392.46
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Chhajja for 4TH
29 Providing and laying controlled cement concrete 0.50 Cumt 6432.99
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Chhajja for 5TH
30 Providing and laying controlled cement concrete 1.50 Cumt 7403.05
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for Ground
31 Providing and laying controlled cement concrete 1.50 Cumt 7403.05
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for First Floor
32 Providing and laying controlled cement concrete 1.50 Cumt 7443.58
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for Second
Item Description of Item Quantity Unit Rate In Amount
33 Providing and laying controlled cement concrete 1.50 Cumt 7484.11
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for Third
34 Providing and laying controlled cement concrete 1.50 Cumt 7524.64
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for 4TH Floor
35 Providing and laying controlled cement concrete 0.50 Cumt 7565.17
M200 and curing etc. complete including the cost of
Plywood form work and reinforcement for
reinforced concrete work in (C) Lintal for 5TH Floor
36 Providing and laying controlled cement concrete 28.50 Cumt 6619.12
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Ground Floor Slab
37 Providing and laying controlled cement concrete 26.50 Cumt 6619.12
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) First Floor Slab
38 Providing and laying controlled cement concrete 26.50 Cumt 6659.65
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Second Floor Slab
39 Providing and laying controlled cement concrete 26.50 Cumt 6700.18
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Third Floor Slab
40 Providing and laying controlled cement concrete 26.50 Cumt 6740.71
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) Fourth Floor Slab
41 Providing and laying controlled cement concrete 6.00 Cumt 6781.25
M200 and curing complete including the cost of
Plywood formwork and excluding reinforcement for
reinforced concrete work in (C) 5th Floor Slab
42 Providing and laying controlled cement concrete 5.50 Cumt 8270.61
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in (E) Stair case for
Ground Floor to First floor
43 Providing and laying controlled cement concrete 5.00 Cumt 8270.61
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in (E) Stair case for
First Floor to Second Floor
Item Description of Item Quantity Unit Rate In Amount
44 Providing and laying controlled cement concrete 5.00 Cumt 8311.14
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in (E) Stair case for
Second Floor to Third Floor
45 Providing and laying controlled cement concrete 5.00 Cumt 8351.67
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in (E) Stair case for
Third Floor to Fourth Floor
46 Providing and laying controlled cement concrete 5.00 Cumt 8392.20
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in (E) Stair case for 4th
Floor to 5th Floor
47 Providing and laying controlled cement concrete 11.00 Cumt 8127.98
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for Ground Floor
48 Providing and laying controlled cement concrete 9.00 Cumt 8127.98
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for First Floor
49 Providing and laying controlled cement concrete 9.00 Cumt 8168.51
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for Second Floor
50 Providing and laying controlled cement concrete 9.00 Cumt 8209.04
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for Third Floor
51 Providing and laying controlled cement concrete 9.00 Cumt 8249.57
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for Fourth Floor
52 Providing and laying controlled cement concrete 13.00 Cumt 8290.10
M200 and curing etc. complete including the cost of
Plywood form work and excluding the cost of
reinforcement etc. complete in RCC Vertical and
Horizontal wall for 5th Floor
53 Providing and laying controlled cement concrete 9.00 Cumt 6350.08
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on
54 Providing and laying controlled cement concrete 4.50 Cumt 6350.09
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on First
Item Description of Item Quantity Unit Rate In Amount
55 Providing and laying controlled cement concrete 4.50 Cumt 6390.62
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on
56 Providing and laying controlled cement concrete 4.50 Cumt 6431.15
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on Third
57 Providing and laying controlled cement concrete 4.50 Cumt 6471.68
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on Fourth
58 Providing and laying controlled cement concrete 1.00 Cumt 6512.21
M200 for RCC work and curing complete including
the cost of Plywood form work but excluding the
cost of reinforced concrete work in Coping on 5th
59 Providing TMT Bar FE 500D reinforcement for R.C.C. 89871.00 Kg 78.31
work including bending, binding and placing in
position complete upto floor two level
60 Providing and fixing 90 cm Height Stainless Steel 44.00 Rmt 3568.43
Railing made from anticorrocive 316 grade S S pipe
of 50 mm dia (16 Gauge) as hand rail with S S
grade Baluster of 38 mm dia Box pipe (16 Gauge) as
a vertical support fixed in RCC slab at 1.2m c/c
including three horizontal S S pipes of 25 mm dia
(16 Gauge) at eqal distance fixed by 18.75 mm dia
(16 Gauge) S S pipe with baluster including
accessories as per detailed drawing as directed etc.
61 Providing and fixing 30 /20 cm Height Stainless Steel 183.00 Rmt 3106.46
Railing made from anticorrocive 316 grade S S pipe
of 50 mm dia (16 Gauge) as hand rail with S S
grade Baluster of 38 mm dia Box pipe (16 Gauge) as
a vertical support fixed in RCC slab at 1.2m c/c
including three horizontal S S pipes of 25 mm dia
(16 Gauge) at eqal distance fixed by 18.75 mm dia
(16 Gauge) S S pipe with baluster including
accessories as per detailed drawing as directed etc.
62 Brick work using common burnt clay building bricks 21.50 Cumt 4153.07
having crushing strength not less than 35 kg./Sq.Cm.
in foundation and plinth in Cement Mortar 1:5. (1-
Cement : 5 -fine sand) (B) Conventional below plinth
63 Brick work using common burnt clay building bricks 90.50 Cumt 4434.92
having crushing strength not less than 35 kg./Sq.Cm.
in foundation and plinth in Cement Mortar 1:5. (1-
Cement : 5 -fine sand) (B) Conventional Ground
64 Brick work using common burnt clay building bricks 64.00 Cumt 4434.92
having crushing strength not less than 35 kg./Sq.Cm.
in super structure in Cement Mortar 1:5. (1- Cement
: 5 -fine sand) (B) Conventional First FLoor
Item Description of Item Quantity Unit Rate In Amount
65 Brick work using common burnt clay building bricks 64.00 Cumt 4476.42
having crushing strength not less than 35 kg./Sq.Cm.
in super structure in Cement Mortar 1:5. (1- Cement
: 5 -fine sand) (B) Conventional Second FLoor
66 Brick work using common burnt clay building bricks 64.00 Cumt 4517.92
having crushing strength not less than 35 kg./Sq.Cm.
in super structure in Cement Mortar 1:5. (1- Cement
: 5 -fine sand) (B) Conventional Third FLoor
67 Brick work using common burnt clay building bricks 64.00 Cumt 4559.42
having crushing strength not less than 35 kg./Sq.Cm.
in super structure in Cement Mortar 1:5. (1- Cement
: 5 -fine sand) (B) Conventional Fourth FLoor
68 Brick work using common burnt clay building bricks 18.00 Cumt 4600.92
having crushing strength not less than 35 kg./Sq.Cm.
in super structure in Cement Mortar 1:5. (1- Cement
: 5 -fine sand) (B) Conventional 5th FLoor
69 Half Brick masonry in common brunt clay building 15.50 Sqmt 669.34
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for Ground Floor.
70 Half Brick masonry in common brunt clay building 53.00 Sqmt 669.34
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for First Floor.
71 Half Brick masonry in common brunt clay building 53.00 Sqmt 675.49
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for Second Floor.
72 Half Brick masonry in common brunt clay building 53.00 Sqmt 681.64
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for Third Floor.
73 Half Brick masonry in common brunt clay building 53.00 Sqmt 687.79
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for 4TH Floor.
74 Half Brick masonry in common brunt clay building 3.00 Sqmt 693.94
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) in foundation and plinth (B)
Conventional in super structure. for 5TH Floor.
Item Description of Item Quantity Unit Rate In Amount
75 Providing and fixing 150 mm wide, approved quality 473.00 Sqmt 295.93
chicken wire mesh at junction of brick work and RCC
work or two dissimilar surfaces, at all heights fixed
by nails, rowal plugs or tag by cement mortar 1:3
before applying the plaster, including curing,
scaffolding all complete as directed.
76 Providing 20 mm thick double coat mala cement 508.00 Sqmt 285.35
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For
77 Providing 20 mm thick double coat mala cement 565.00 Sqmt 285.35
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For First
78 Providing 20 mm thick double coat mala cement 565.00 Sqmt 312.74
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For
79 Providing 20 mm thick double coat mala cement 565.00 Sqmt 340.13
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For Third
80 Providing 20 mm thick double coat mala cement 565.00 Sqmt 367.52
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For Fourth
Item Description of Item Quantity Unit Rate In Amount
81 Providing 20 mm thick double coat mala cement 205.00 Sqmt 394.91
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing, 10x10 mm grooves etc. complete. For 5th
82 Providing 10 mm. Thick cement plaster in single coat 263.50 Sqmt 155.55
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete. Ground Floor
83 Providing 10 mm. Thick cement plaster in single coat 237.50 Sqmt 155.55
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete. First Floor
84 Providing 10 mm. Thick cement plaster in single coat 237.50 Sqmt 179.53
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete. Second Floor
85 Providing 10 mm. Thick cement plaster in single coat 237.50 Sqmt 203.50
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete. Third Floor
86 Providing 10 mm. Thick cement plaster in single coat 237.50 Sqmt 227.48
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete. 4th Floor
87 Providing 10 mm. Thick cement plaster in single coat 34.00 Sqmt 251.46
for plastering on ceiling and soffits of stairs and
finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) including Mala troveled finish
etc. complete 5th Floor
88 20 mm thick Sand faced cement plaster with 18x8 2410.00 Sqmt 391.88
mm grooves as suggested by this office consisting of
12 mm thick backing coat of C.M. 1:3 ( 1 cement :
coarse sand ) and 8 mm thick finishing coat of C.M.
1:1 ( 1 cement : 1 coarse sand) for all heights as
directed etc. complete. and as per pattern sample
aprroved by the architect or directed engineer in-
89 Providing throating or plaster drip and moulding to 70.50 Rmt 43.22
R.C.C. Chhajja.
90 Applying two coats of Acrylic lapy (putty) & two 4104.50 Sqmt 40.59
coats of primer of approved brand and manufacture
on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand
papered smooth.
Item Description of Item Quantity Unit Rate In Amount
91 Wall painting (three coats) with plastic emulsion 2857.00 Sqmt 130.29
paint of approved brand and manufacture on
undecorated wall with WITH ONE WALL TO
HIGHLIGHT IN SPECIAL EFFECT (ROYALE PLAY)
COLOUR surface to give an even shade including
throughly brushing the surface free from mortar
droppings and other foreign matter and sand
papered smooth.
92 Painting (three coats) with plastic emulsion paint of 1247.50 Sqmt 128.13
approved brand and manufacture on undecorated
ceiling surface to give an even shade including
throughly brushing the surface free from mortar
droppings and other foreign matter and sand
papered smooth.
93 Wall Painting (Two coats) with weather proof 100% 2410.00 Sqmt 117.40
acraylic emulsion water Repellant paint of approved
brand and manufacture and of required shade on
exterior wall surface to give an even shade over and
including primery coat with Alkaly resistance primer
of approved brand after thoroughly brushing
surface to remove all dust and remains of loose
powdered material etc. copm. for all height
94 Providing And filling with good quality cinder 16.00 Cumt 523.18
(steam coal) as directed by engineer in charge in
sunks in layers of 15 cm thick,including
watering,placing ,ramming well etc as directed, for
95 Providing Water proofing Treatment on Sunk Slab 118.50 Sqmt 388.04
including cement concrete flooring 1:2:4 (1-cement :
2-coarse sand : 4-graded stone aggregate 20mm
nominal size) laid in one layer and finished with a
floating coat of neat cement average 50mm thick to
Prepare slope including water proofing chemical
etc. Complete for Sunk Slab All Floor.
Item Description of Item Quantity Unit Rate In Amount
96 Providing and laying China mosaic type water 230.50 Sqmt 1113.02
proofing treatment on terrace including cleaning the
surface by wire brush as directed including applying
neat cement slurry @ 2.75 Kg/Sq.m mixed with
waterproofing compound after cleaning the surface,
laying cement concrete using brickbats 25 to
mm size well immersed in water with 50% of
cement mortar 1:5 (1 cement : 5 coarse sand) mixed
with waterproofing compound over 20 mm thick
layers of cement mortar 1:5 (1 cement : 5 sand) to
required slope including rounding of junctions of
walls and slabs and after two days of proper curing,
applying second coat of cement slurry, finishing the
surface with 20 mm thick cement mortar 1:4 and
China mosaic tiles and finally finishing the surface
with white cement slurry. After completion, the
whole terrace shall be flooded with water for a
period of two weeks. shall provide a minimum
(Five) years warranty/guarantee for the complete
waterproofing treatment against leakage, seepage
and failure of the waterproofing system from the
date of completion, and shall rectify any defects
arising during the warranty period as directed by
the Engineer-in-Charge
97 Providing & fixing in position standard extruded 58.00 Sqmt 3312.80
Aluminum Three track (3 shutter + 1 Mosquito net
shutter) with Standard Extruded Colour Anodied
Alluminium Section Equivalent to Jindal Series E
(30mm) Section Numbered: Frame -Bottom with
Weep Holes -20928, Frame Top & Side-20837
,Shutter Top & Bottom 20993, Shutter Inter Lock -
20550 ,Shutter Side (handle) -20549 With 5mm
thick Transparent Tinted Float Glass With EPDM
Rubber Gasket, Air Lock Stirip dd another shutter
fitted with SS wire mosquito mesh jali in the same
Aluminium shutter section and Finishing , Joint With
Section Sealant, With Power Coated Standard
Alluminium Fitting.with as per window size
including all required materials labours and
equipments as per detailed drwg. as directed.
Item Description of Item Quantity Unit Rate In Amount
98 Providing and fixing in position standard extruded 8.50 Sqmt 4481.37
Aluminium three-track sliding window (2 shutters +
1 mosquito net shutter) made of colour anodized
extruded Aluminium sections equivalent to Jindal
Series E (30 mm), comprising: Frame Bottom with
weep holes – Section No. 20928, Frame Top & Side –
Section No. 20837, Shutter Top & Bottom – Section
No. 20993, Shutter Interlock – Section No.
and Shutter Side (handle) – Section No. 20549. The
shutters shall be fitted with 5 mm thick transparent
tinted float glass fixed with EPDM rubber gasket, and
one shutter provided with SS wire mosquito mesh
jali in the same Aluminium shutter section. The
system shall include air lock strip, joint sealing with
approved sealant, and finishing with powder-coated
standard Aluminium fittings, complete as per
window size and detailed drawings. The rate shall
be inclusive of all materials, fittings, fixtures, labour,
equipment, and accessories, and the work shall be
carried out as directed by the Engineer-in-Charge.
99 Providing & Fixing in position standard extruded 6.00 Sqmt 1874.56
approved colour anodised Aluminum Ventilator
with outer frame (of Jindal Section No.21458,@
Wt0.650 kg/Rmt ) with 5mm thick Bajari figure
adgesteble tinted louvers glass fixed to alluminium
strip blade including fixtures, fastenning, labours
and equipments as per detailed drawing as directed.
For Ventilators
100 Providing and fixing 35 mm thick flush single door 128.50 Sqmt 4154.13
shutter, solid core type, conforming to IS:2202 and
ISI approved, mounted in a wooden frame of size
100 mm × 50 mm for durable grip of hinges. The
shutter shall be finished with 1 mm thick decorative
laminate on both sides, withTeakwood banding on
the periphery. The work shall include providing and
fixing 600 mm long stainless steel handles on both
sides, stainless steel fixtures, locking arrangement of
approved standard make, and fixing of 4 nos.
mm long stainless steel hinges per shutter. All
fittings, fasteners, accessories, labour, and materials
shall be included, with sample and shade approved
by the Engineer-in-Charge.
101 Providing and laying 60 x 60 cm Machine polished 27.50 Sqmt 1079.41
Machine cut Kota Stone slab flooring over 20 mm
(average)thick base of cement mortar 1:6 (1-cement
6-coarse sand) or L.M 1:1.5 (1 Lime putty :
coarse sand laid over and jointed with grey cement
slurry mixed with pigment to match the shade of
slab including rubbing and polishing etc.complete
Item Description of Item Quantity Unit Rate In Amount
102 Providing and laying Vitrified tiles 8 to 10 mm thick , 63.00 Sqmt 1058.21
24'' x 24'' in flooring treads of steps and landing laid
on a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand ) finishing with flush
pointing in white cement.
103 P & L 24" x 24" soluble salt vitrified 8 mm thick tile 548.00 Sqmt 1053.32
flooring over 20 mm (average) base of cement
mortar 1:6 ( 1 cement: 6 coarse sand) on new
surface or fixing on existing flooring by adhesive
material including dismentaling of existing flooring
and jointed with color cement slurry including
finised with flush pointing & cleaning the surface etc.
complete for DARK shade
104 Providing and laying antiskid ceramic tiles 30 x 30 25.50 Sqmt 994.32
cm size 6 mm thick in flooring treads of steps and
landing laid on a bed of 12 mm thick cement mortar
1:3(1-cement:3-coarse sand)finishing with flush
pointing in white cement
105 Providing and laying glazed tiles tiles size 60 x 30 395.00 Sqmt 1477.25
cm 6 mm thick in skirting risers of steps and dedo on
10 mm thick cement plaster 1:3 (1-cement:3coarse
sand) and jointed with colour cement slurry
106 Providing and fixing staircase riser with 600x600x10 197.50 Sqmt 1397.84
mm thick Soluble Salt Vitrified Tiles, Granite
projecting, nozing rounded moulding in tread laid
over 12 mm (av.) thick bases of cement mortar 1:6
(1-cement : 6-coarse sand) jointed with grey or
colour cement slurry including rubbing and
polishing incl. making Three No.s of grooves of size
3mm X 3mm along the length of treads etc. complete
107 Providing and fixing polished 18 mm thick black 152.50 Sqmt 2651.25
granite Shalves with full round edge and double side
polished of approved quality fixing with cement
slurry & adhesive including moulding of both
exposed edges as directed by engineering in charge
108 Providing and fixing mirror polished 18-20 mm thick 185.48 Sqmt 2410.87
Granite stone with full round edge and polished of
approved quality in clading on sill and around the
doors/ windows/ ventilation with 12 mm thick
cement mortor CM (1:4) and fixing with cement
slurry & adhesive including moulding of exposed
edges as directed by engineering in charge etc.
109 Providing and fixing pre-cast Rubber Dye / steel Dye 461.50 Sqmt 704.07
inter locking concrete block 60mm thick with grade
of concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design
Confirming to IS 15658 : 2006 including 35 mm Sand
layer for levelling and filling the joint with sand in
proper line and level as per guidlines of IRC : SP 63-
2018 etc. Complete
Item Description of Item Quantity Unit Rate In Amount
110 Providing and fixing Safty grills of required pattern 1623.00 Kg 110.09
for windows/ Door using necessary 12x12 mm M.S.
Square bar, M.S flats and other structural steel at
required spacing including cutting, welding and
fabriction etc. including one coat of primer of
approved quality and two coats of oil painting as per
detail drawing etc complete.
111 Providing erecting and fixing double coated Syntex 25000.00 Litre 3.95
PVC. (ISI) water tank of required capacity each with
all necessary fittings and connection etc. complete
112 Providing laying and jointing in true line and level 140.00 Rmt 195.67
50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
113 Providing laying and jointing in true line and level 200.00 Rmt 148.12
40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
114 Providing laying and jointing in true line and level 360.00 Rmt 91.84
25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help
of clamp at every two metre C/C or shall be
concelled as directed including necessary fittings etc.
including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all
115 Providing laying and jointing in true line and level 240.00 Rmt 72.65
15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In Charge.
Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Item Description of Item Quantity Unit Rate In Amount
116 Providing, laying and jointing in true line and level 75.00 Rmt 834.38
160 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on
wall using of PVC clamp of the size 160 mm diametre
x 210 mm length x 196 mm heigh at every 2000 mm
center to center or shall be concealed in walls as
directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost
of all materials.
117 Providing, laying and jointing in true line and level 205.00 Rmt 857.65
110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on
wall using of PVC clamp of the size 110 mm diametre
x 149 mm length x 145 mm heigh at every 2000 mm
center to center or shall be concealed in walls as
directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost
of all materials.
118 Providing, laying and jointing in true line and level 60.00 Rmt 798.91
75 mm dia. UPVC SWRType B pipe conforming to IS
13592-1992 with one end plain and other end
socketed with rubbering and fitting conforming to
ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on
wall using of PVC clamp at every 2000 mm c/c or
shall be conceled in walss as directed including
necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive
solvent cement including cost of all materials.
119 Providing and fixing in PVC SWR cowel went 75mm 3.00 No 16.16
dia to pipes.(B) 75mm dia.
120 Providing and fixing in PVC SWR cowel went 11.00 No 29.29
110mm dia to pipes.(B) 110mm dia.
121 Providing and fixing PVC SWR Nahni trap IS 14735 48.00 No 585.37
for drain - 100 mm diameter with jali of the
following nominal diameter of self cleansing design
with C.I scread down or hinged grating including the
cost of cutting and making good the walls.
Item Description of Item Quantity Unit Rate In Amount
122 Provision and fixing water closet squatting orissa 8.00 No 1606.91
type W.C. pan size 580mm integral footrest and
mm P or S trap and in cluding 25 mm dia CP brass
flush valve and GI inlet connection etc. comp. (A)
Vitreous china long pattern white or color
123 Providing and fixing brass screw down stop tap.(A) 35.00 No 205.83
124 Providing and fixing ball cock of approved. quality as 2.00 No 189.84
directed.(A) Copper Metal (ii) 50mm dia.
125 Providing and fixing washbasin with single hole for 24.00 No 1619.87
pillar tap with C.I. or M.S. brackets painted white
including Rubber plug, sutting holes and making
good the same but excluding fittings and also
including rate of C.P. brass waste for washbasin or
sink (A) 32mm dia. and M.I. fisher union for
washbasin or sink. (A) 32mm dia.; (A) Vitreous
China:(ii) Flat Back washbasin 550 mm x v 400mm
size. (i) In white colour.
126 Providing and fixing 600mm x 450mm bevelled edge 48.00 No 851.13
mirrror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden pluge
with C.P. brass screws and washers.As per Approved
127 Providing and fixing C.P. brass towel rail comlete 24.00 No 616.42
with C.P. brass brackets fixed to wooden plugs with
C.P. brass scews (B) 600mm x 20mm size.As per
128 Providing and fixing screw down bib taps of 40.00 No 214.81
following size.(A) Brass screw down bib tap polished
bright. (i) 20mm dia.As per Approved Make
129 Providing and fixing pillar tap, capstan head, screw 24.00 No 308.73
down high pressure with screws, shanks and back
nuts. (i) 15mm dia.As per Approved Make
130 Providing laying (to level or slopes) and jointing 188.00 Rmt 678.01
reinforced concrete Light duty non-pressure pipes
I.S. class NP2 of the following internal diameter with
collars and butt ends prepared for collar joints
including testing of joints complete. (D)
131 Providing and laying (two level or slopes) and 156.00 Rmt 526.46
jointing with stiff mixture of Cement Mortar in
proportion 1:1, Salt glazed stone ware pipes of pipes
150mm laying lime concrete 1:5:10 (1-Lime putty :5-
Fine samd : 10-Graded brick aggregates 40mm
nominal size) bedding for stoneware pipes of
following internal diameters with necessary
formwork and curing complete.
132 Providing and fixing S.W. gully trap with C.I. grating 10.00 No 1246.92
brick masonry chamber and water tight C.I. cover
with frame of 300mm x 300mm size (inside) with
standard weight (i) Square mouth traps (B) 150mm
x 100mm size P or R type
Item Description of Item Quantity Unit Rate In Amount
133 Constructing brick masonry chamber for 17.00 No 3223.92
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x
610mm intenal dimensions with frame (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-
graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm
and 450mm deep for single pipe line.
134 Constructing brick masonry chamber for 9.00 No 3933.95
underground C.I. Inspection C.I. Inspection chamber
and bends with briocks having croshing strength not
less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover
500mmx 700mm intenal dimensions with frame
(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed
concrete etc. complete (i) Inside dimensions
500mmx 700mm and 450mm deep for single pipe
135 Constructing brick masonry chamber for 5.00 Each 242.39
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x
610mm intenal dimensions with frame (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-
graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm
and 450mm deep for single pipe line.
Extra over items for every additional depth of 0.1M.
of part thereof beyond 450mm depth for Brick
masonry chamber.(i) for 455mm x 610mm size.
Item Description of Item Quantity Unit Rate In Amount
136 Constructing brick masonry chamber for 5.00 Each 264.86
underground C.I. Inspection C.I. Inspection chamber
and bends with briocks having croshing strength not
less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover
500mmx 700mm intenal dimensions with frame
(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse
sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed
concrete etc. complete (i) Inside dimensions
500mmx 700mm and 450mm deep for single pipe
Extra over items for every additional depth of 0.1M.
of part thereof beyond 450mm depth for Brick
masonry chamber.(i) for 500mm x 700mm size.
137 Providing and fixing GI Ladder of required pattern 300.00 Kg 95.95
with GI flats(30x3mm) or round or square bars
(12mm) at required spacing & with round headed
bolts and nuts or screws or welding including
primer coat of approved quality and two coats of oil
paintas as directed by engineer in charge
138 Providing, fixing and construction of sandwich type 12.50 Sqmt 6818.51
18 mm thick One Side polished Granite Stone of
uniform size and colour for kitchen/pantry/countr/
laboratory shelves etc. in floor, dedo or facia upto
100 mm wide including necessary cement mortar
bedding in cement mortar 1:2 of required thickness.
Granite Stone shall be fixed over 25 mm thick
Polished Kota bottom, cement joints and pointing as
specified with necessary making of edges, polishing
curing daily mopping with water and kerosene as
directed for atleast 15 days or upto the satisfaction
of engineer-in-charge.
139 Providing and fixing 25 mm thick polished kota 12.50 Sqmt 667.61
stone Shalve with full round edge and double side
polished of any required and fixing with cement
slurry & adhesive including both exposed edges cut
and Smooth Finished as directed by engineering in
charge etc. complete.
140 Providing and fixing Kitchen platform trolley having 13.50 Sqmt 12664.39
three drawers of SS (IS 304) of required size like
thali, katleri, perforated, partition, cupsosar type in
kitchen platform having drawer front side and
backside by using 19mm thick all proof plywood of
ISI quality all side laminated etc. as directed. The
size of SS (IS 304) basket of size 4" to 18" for thali,
dish, katleri, perforated, partition, cupsosar type as
directed including necessary S.S. fittings, handles,
nobs, telescopic channels, etc. as directed
Item Description of Item Quantity Unit Rate In Amount
141 Providing & fixing 18-19 mm thick cupboards of 176.30 Sqmt 3203.72
plywood shutter including fixing 19 mm and 6mm
thick back to back flush all proof plywood &
including with Teak Wood frame 50 mm x 50 mm
size as directed etc. complete including necessary
both side lamination 1 mm thick outer side &
0.80mm thick inner side fixing by necessary SS
hinges, handles, magnet, stoppers, etc. as directed
including fevicol, and other hardware material
required. Plywood and all fixture shall be of ISI
quality and as approved by engineer-in-charge
including cost of teak wood beading, one coat of
primer and two coats of oil painting or polishing as
142 Providing and fixing Kitchen sink with C.I. or M.S. 8.00 Nos 3451.17
brackets, painted white including cutting holes in
walls and making good the same but excluding
fittings. © Vitreous China Sink.(i) 400x550 size
143 Providing and fixing in position 300 mm high, 150 50.00 No 707.00
mm wide English letters made from 1.0 mm thick
stainless steel sheet as directed by Engineer in
charge with all necessary tools & plants etc.
144 Providing and fixing in position 150 mm high, 50.00 No 404.00
English letters made from 1.0 mm thick stainless
steel sheet as directed by Engineer in charge with all
necessary tools & plants etc. complete.
145 Providing and fixing MS squire hollow pipe Section 36.50 Sqmt 3430.97
75 x 50 x 5mm section 8.424KG/RMT at every
100mm C/C into R.C.C/Brick structure
horizontally/vertical with priming coat and two coat
enamel paint including all material , laboure charges
and accessories as per requirement as directed by
Engineer-in-charge etc. complete.
146 Providing and laying 0.5 mm thick LDPE/polythene 437.50 Sqmt 65.65
sheet as moisture barrier below plinth slab over
prepared and compacted sub-grade, including
overlaps, joint sealing, cutting, wastage and
protection, complete as per approved specifications
and as directed by the Engineer-in-Charge.
147 Providing and applying approved tile grout with 4176.00 Rmt 17.47
grouting hardener in the joints of floor and dado
tiles, including cleaning and dampening of joints,
filling, compacting and finishing the grout, removal
of surplus grout, final cleaning of tile surfaces and all
incidental works, complete as per approved
specifications and as directed by the Engineer-in-
148 Providing and fixing well-set napkin 16.00 Nos 555.50
ring/holder/hanger in bathroom, complete with all
necessary fittings and accessories, as directed and
approved by the Engineer-in-Charge.
Item Description of Item Quantity Unit Rate In Amount
149 Providing and fixing C.P. brass towel ring of 8.00 Nos 757.50
approved quality and size, with C.P. brass brackets
fixed to wooden cleats with C.P. brass screws, or
with concealed fittings as per manufacturer's design,
including drilling holes and making good the walls,
all complete as per the direction of the Engineer-in-
150 Providing and fixing 100 × 100 mm square overhead 8.00 Nos 2171.50
shower, single flow, stainless steel face plate with
ABS chrome finish body, Rubit cleaning system,
complete with all fittings, accessories and
installation, as directed by the Engineer-in-Charge
151 Providing and fixing brass wall mixer faucet for 8.00 Nos 3194.63
bathroom, wall mounted type, comprising hot and
cold water control with provision for overhead
shower / spout, including wall mixer body, bends,
C.P. flanges, necessary fittings and accessories, fixing
arrangement complete in all respects as per
direction of Engineer-in-Charge.
152 Constructing brick masonry chamber for 4.00 No. 7180.44
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions, total
weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.
top slabe with 1:2:4 mix (1-cement :2- coarse sand
:4-graded stone aggregate 20mm size) foundation
concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x 850 mm
and 450mm deep for pipe lines with three or more
153 Providing and fixing Rolling shutters of approved 5.00 Sqmt 3554.40
make made of 80 mm wide M.S. laths inter-locked
together through their entire length and jointed
together at the ends by end locks mounted on
specially designed pipe shaft with bracket plates,
guide channels and arragements for inside and
outside locking with push-pull operation including
the cost of hood cover and spring etc. complete.(A)
Shutters having width below 3.5 M.
154 Providing and fixing decorative entrance gate made 518.00 kg 164.63
out of cast iron and various mild steel tabular
section combination , the Ornamental entrance gate
should be fixed at compound wall including pattern
and die making , cutting , welding , grinding,
fabrication , fixing in position at compound wall with
necessary pedestal, bearing block and other locking
arrangement. The entrance gate should be painted
with two coats of priming coat of paint, and two coat
of oil paint etc complete. As per detail design and
instruction of architect.
Item Description of Item Quantity Unit Rate In Amount
155 Box cutting the road surface to proper slope and 274.00 Cum. 106.81
camber for making a base for road work including
removing the excavated stuff and depositing on the
road side slope as directed upto 50Mt.lead.
156 Filling in plinth with sand under floors including 56.00 Cum. 416.12
watering ramming, consolidating and dressing
complete for road work
157 Construction of granular sub-base 150 mm thick by 80.00 Cum. 793.86
providing coarse graded machine crushed B.T.
material satisfying MOST specification of grading I
(B.T. stone aggregate 53 mm to 26.5 mm 35 %,
to 4.75 mm - 45 % and 2.36 mm below - 20 %
)including spreading in uniform layer with motor
grader on prepared surface, mixing by mix in place
method with rotavator at OMC and compacting with
vibratory roller to achieve the desired density etc.
158 Providing and laying wet mix macadam base course 56.00 Cum. 903.95
250 mm thick using machine crushed B.T. chips as
per required gradation mixing with required
optimum quantity of water, conveying the mix to
site of work, spreading in to grade and camber with
mechanical paver and consolidation each layer with
vibratory roller including cost of material labour
plant and equipment etc. complete.
159 Compaction and finishing of cement concrete road 553.00 Sqm 63.63
by trimix M.250 process providing extra Labour
charges for the trimix vacume dewatering service
process on cement concrete road sutface by using
vacuum dewatering pump floater surface vibrator
including making groves and rough finish to surface
including leveling etc complete.
160 Providing and Laying homoginious Grey cement 234.00 Rmt 370.68
based concrete kerbing of size 30 cm x 30 cm x
cm size as per detailed drawing having grade of
concrete M25 grade, including necessary excavation,
BBCC 1:5:10 7.5 cm as per ddetailed drawing fixing
in line and level, filling joints in CM 1:3 with smooth
finished, white washing three coats etc. complete as
directed by Engineer in charge.
161 Providing and fixing to wall ceiling and floor 10.0 Kg. 130.00 Rmt 339.05
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling and
floor.(G)110 mm
162 Providing and fixing to wall ceiling and floor 10.0 Kg. 40.00 Rmt 696.90
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling and
floor.(G)160 mm
Item Description of Item Quantity Unit Rate In Amount
163 Providing junction for rain water juncton chamber of 16.00 No 8978.90
size 0.60x0.60x0.75m with excavation of size
1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete
including brick masonary wall in CM 1:6 of 0.75m
height & 0.23m thick with 15mm thick cement
plaster inside & outside & 1.06x1.06 RCC (1:2:4)
slab of thickness 0.15m with CRS steel and
0.60mx0.45m cast iron manhole cover with frame
weight not less than 35 kg as per directed by
Engineer-in-charge
164 Providing Filter chamber of Brick work in C:M 1:6 of 2.00 No 16652.88
size 2.06mx1.20m x1.20m & excavation dimension
of 2.66mx 1.81x1.35m including C.C 1:2:4 bed
concrete of 0.15m thick including brick work in c.m
1:6 for 23cm thick wall including 15mm thick
cement plaster inside & outside with cement slurry
& 10cm thick RCC 1:2:4 top cover with frame of
minimum weight of 35 kg & filling filter material
kapchi in layers (25-40mm & 10-20mm) & BT metal
40mm & sand as per directed by Engineer-in-charge
165 Providing Recharging pit of size 2.0m Dia.& 2.0m 1.00 No 15253.02
depth of water logging with excavation filling the pit
with gravel & sand in layers including making
300mm dia bore depth of 4.5mt & above concrete
with kapchi in layers (25-40mm & 10-20mm) & BT
metal 40mm & filling brick as directed by Engineer-
166 Drilling of 165 mm dia bare in over burden strata 100.00 Rmt 196.95
and further drilling of 165mm dia bore in all typs of
strata with DTH ring including lowering of casing
pipe up to requied length and testing etc. including
testing with ben meter.
167 Providing and lowering of 165mm FVPVC pipe zero 90.00 Rmt 536.57
to overburden strata
168 Providing and lowering 165 mm dia PVC pipe etc 90.00 Rmt 252.50
169 Providing and fixing M. S. cap –plug hinge type with 1.00 No. 165.64
frame of required design for 150mm dia Bore casing
170 Suppling and installing submersible pumping set 1.00 Set 26300.40
7.50 HP manufactured as per IS standard including
non return valve sluice valve flexible cable (
asrequired 70 mtr length ) volt meter, panel board,
capacitor,starter,switch, pressure guage with
accessories of approved manufacture tools of
Hours power capacity.
171 Providing and fixing check or non return pully wheel 1.00 No. 1111.00
valve of 50 mm diameter.
172 Providing and fixing to wall,ceiliing and floor 100.00 Rmt 794.18
galvanised mild steel tubes ( Medium grade ) of the
following nominal bore, tube, fittings and clamps
included making good the wall, ceilling and floor (F)
Item Description of Item Quantity Unit Rate In Amount
173 Supply. installation, testing &commissioning of ISI 1.00 No 71531.23
approved electrical motor driven jockey pump set
having 10.8 m3/hr. @ 70m head.The pump unit shall
be a horizontally direct mounted motor. Unit shall
comprise the following minimum requirements:
a)Pump, b) Electric motor IE2, c) Foundation bolts,
d) Mating flanges with gasket and fasteners, e)
Discharge gauges, etc.complete in all respect, with
174 Supply, installation, testing &commissioning of 1.00 No 23488.56
Priming tank, HDPE type, 1000 litres, with necessary
piping 100 mm size, G.I pipe for priming the pumps,
pipe of with butterfly valves for isolation, Water
Filling to priming tank by piping min. 50 mm size,
with all complete.
175 Supply, installation, testing &commissioning of 1.00 No 40430.30
Manifold( surge vessel,)for fire hydrant system,
min.300 mm diameter,made from M.S plate,hydro
tested to 15 kg./cm2. with ball valves,header with
couplings for fitting pressure switches,pressure
gauges etc.with necessary isolation valves with all
176 Supply, fabrication & erection of aboveground G.I. 'C'- 200.00 Mtr 332.29
Class, ERW piping,conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 25 mm dia.
177 Supply, fabrication & erection of aboveground G.I. 'C'- 75.00 Mtr 412.08
Class, ERW piping,conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 32 mm dia.
Item Description of Item Quantity Unit Rate In Amount
178 Supply, fabrication & erection of aboveground G.I. 'C'- 70.00 Mtr 496.92
Class, ERW piping,conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 40 mm dia.
179 Supply, fabrication & erection of aboveground G.I. 'C'- 80.00 Mtr 551.46
Class, ERW piping, conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 50 mm dia.
180 Supply, fabrication & erection of aboveground G.I. 'C'- 70.00 Mtr 816.08
Class, ERW piping, conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 65 mm dia.
Item Description of Item Quantity Unit Rate In Amount
181 Supply, fabrication & erection of aboveground G.I. 'C'- 80.00 Mtr 881.73
Class, ERW piping, conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 80 mm dia.
182 Supply, fabrication & erection of aboveground G.I. 'C'- 180.00 Mtr 1285.73
Class, ERW piping, conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 100 mm dia.
183 Supply, fabrication & erection of aboveground G.I. 'C'- 30.00 Mtr 1836.18
Class, ERW piping, conforming to IS:1239, part-I,
Heavy class up to 150 mm dia. and IS:3589, for size
200 mm dia. & above, thickness. G.I. pipe fitting's as
per IS: 1239, part-II, Heavy class for size 150 mm
dia. & below & IS: 3589, for size 200 mm dia. above,
flanges, nuts bolts & washers, 3 mm thick gasket,
pipe hangers, etc.Hydrostatic testing for 2 hour's at
150% of the system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and two
coats of fire red conf. to IS: 5, Shade 536. Complete
with all accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. 150 mm dia.
Item Description of Item Quantity Unit Rate In Amount
184 Design , Supply and installation of Safety Signage 2500.00 Sq. inch 8.08
made of Zinc Sulphilde based glow in dark , Rigid
sheet with High Luminous property enclosed in a
transperent weather proof UV stabilized plastic
pasted on 3 mm thick clear acrylic sheet such as
EXITS, EMERGENCY EXIT, DO NOT USE LIFT
DURING FIRE, FLOOR MARKINGS, FIRE LIFT,
STAIRCASE EXIT, FIRE ALARM CALL POINT, FIRE
HOSE REEL, FIRE HYDRANT POINT etc.
185 Supply, Installtion, Testing & Commissioing of 70.00 No 478.74
Standard Response Sprinkler, Pendent Brass
Sprinkler, Quartzoid Bulb type with crome finish,
nickel crome platde, K factor K-80, Temp.- 680C,
1/2" end connection including resessed escutcheon.
186 Supply, installation, testing & commissioning of 1.00 No 2055.35
pressure switch. (Range 0 to 16 kg/cm2)
187 Supply, installation, testing & commissioning of 150 2.00 No 1993.74
mm dia. dial Burdon Type Glycerine Filled pressure
gauge with isolation ball valve arrangements with
necessary isolation valves with all complete.( Range
188 Supply, Installation, Testing & Commissioning of 6.00 No 1542.27
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia. Gear
operated complete with mating flanges /ANSI class
# 150 with bolts & nuts washers, rubber gaskets
mm thick, etc., with all complete. 50 mm dia.
189 Supply, Installation, Testing & Commissioning of 5.00 No 2020.00
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia. Gear
operated complete with mating flanges /ANSI class
# 150 with bolts & nuts washers, rubber gaskets
mm thick, etc., with all complete. 80 mm dia.
190 Supply, Installation, Testing & Commissioning of 4.00 No 2349.26
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia. Gear
operated complete with mating flanges /ANSI class
# 150 with bolts & nuts washers, rubber gaskets
mm thick, etc., with all complete. 100 mm dia.
191 Supply, installation, testing & commissioning of Cast 5.00 No 1285.73
iron body Dual Plate Wafer Type NRV conf. to IS:
210, PN-1.6 complete with mating Flanges class #
150 with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete Accessories 50 mm dia.
192 Supply, installation, testing & commissioning of Cast 3.00 No 1688.72
iron body Dual Plate Wafer Type NRV conf. to IS:
210, PN-1.6 complete with mating Flanges class #
150 with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete Accessories 80 mm dia.
Item Description of Item Quantity Unit Rate In Amount
193 Supply, installation, testing & commissioning of Cast 3.00 No 2570.45
iron body Dual Plate Wafer Type NRV conf. to IS:
210, PN-1.6 complete with mating Flanges class #
150 with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete Accessories 100 mm dia.
194 Supply, installation, testing & commissioning of SG 2.00 No 991.82
iron body SinglePlate Wafer Type NRV conf. to
ASTMA 536, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets 3 mm
thick, etc., with all complete. Accessories 50 mm dia.
195 Supply, installation, testing & commissioning of SG 2.00 No 1174.63
iron body SinglePlate Wafer Type NRV conf. to
ASTMA 536, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets 3 mm
thick, etc., with all complete. Accessories 80 mm dia.
196 Supply, installation, testing & commissioning of SG 2.00 No 1395.82
iron body SinglePlate Wafer Type NRV conf. to
ASTMA 536, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets 3 mm
thick, etc., with all complete. Accessories 100 mm dia.
197 Supply, installation, testing & commissioning of Y 1.00 No 4295.53
Type Strainer complete with mating flanges with
bolts & nuts, washers, gaskets 3 mm thick, etc., with
all complete accessories. 80 mm dia.
198 Supply, installing, testing and commissioning of 1.00 No 4037.98
Normax make CI heavy duty ball type foot valve with
flanges, nut bolts, gaskets etc. with necessary
complete accessories. 80 mm dia.
199 Supply, installation, testing & commissioning of Four 1.00 No 6974.05
way fire brigade Inlet connection with 63 mm dia.
stainless steel (SS304) instantaneous male inlets
with built in non return valve in each inlet with
mm dia. header pipe, suitable rubber cap and GI
chain including nuts, bolts, washers, gasket 3 mm
thick, etc. with all complete.
200 Supplying FIRE bucket round bottom of 9 liters 8.00 No 881.73
capacity made out of 24 gauge G.I Sheet with extra
handle at bottom duly painted white inside and Red
out side with FIRE mark. Filled with dry-sand and
kept on existing stand provided or hung on wall
201 Supplying and erecting floor mounting Stand for 2.00 No 4404.61
keeping four nos. of FIRE buckets comprising
mm in length, 900 mm height frame made out of
30mm x 30 mm x 4 mm angle iron with cross
supports legs, welded with 4 hooks and duly painted
with one coat of primer and two coats of approved
enamel P O red paint.
202 Supply & installation of stainless steel body Orifice 6.00 No 919.10
Plate of suitable inner bore along with matching
flange - as per specification & requirement as per
hydraulic calculation.
Item Description of Item Quantity Unit Rate In Amount
203 Providing and fixing approved make Perforated C 10.00 Mtr 367.64
type cable tray. Made from pre- galvanized sheet
steel. The cable tray should be bended as per IS
2062/1079 . with max 17.5% perforation with
coupler plate / Fish plate and GI hardware like nut -
bolt and washers etc. erected on existing support as
per Specification and as per instruction of engineer
in charge..(5) 300 X 50 X 1.5 mm Thick
204 Providing and fixing approved make Perforated C 10.00 Mtr 257.55
type cable tray. Made from pre- galvanized sheet
steel. The cable tray should be bended as per IS
2062/1079 . with max 17.5% perforation with
coupler plate / Fish plate and GI hardware like nut -
bolt and washers etc. erected on existing support as
per Specification and as per instruction of engineer
in charge..(3) 150 X 50 X 1.5 mm Thick
205 Supply, installation, testing & commissioning of 6.00 No 4258.16
Oblique pattern type stainless steel (SS 304) single
headed External Fire Hydrant Valve with 63 mm dia.
female instantaneous outlet conf. to IS: 5290, type -
A, including mating flanges, galvanised nuts,
galvanised bolts/studs, washers & gaskets 3 mm
thick with all complete.
206 Supply, installation, testing & commissioning of 63 6.00 No 1277.65
mm dia. stainless steel (SS 304) Universal Branch
Pipe conf. to IS:
207 Supply & installation, testing & commissioing of Fire 6.00 No 5065.15
Fighting Hose - conf. to IS : 636, type B (type- 3), The
fire hose shall be 15 m long with 63 mm dia.
stainless steel (SS 304) couplings conf. to IS: 903, at
both the ends for connection with the hydrant valve
and the branch pipe.
208 Supply, installation, testing & commissioning of 6.00 No 2570.45
fabricated from 3 mm MS sheet, hose box of size-450
mm x 600 mm x 250 mm - painted with Fire Red as
per IS: 5, shade no. 536 front 3 mm thick transparent
glass with lock & key, handle and brass hinges - to
accommodate one number of 15 mtr long hose and
one number of universal branch pipe, including
supporting arrangement with civil work.
209 Supply, Installation, testing & commissioing of 6.00 No 5506.52
Swinging type mild steel hose reel drum with 20 mm
dia. x 30 mtr. rubber hose as per IS: 884. The
mounting stand shall be of mild steel and the hose
shall be fitted with a SS shut-off nozzle & SS ball
valve of 25 mm dia. including supporting
arrangement with all complete. accessories
210 Supplying, fixing & testing of of CI ball Valve 25mm 20.00 No 587.82
211 Filling Of Gaps Between pipe and Core Cutting Hole 37.00 No 221.19
With Chemical and Cement
Item Description of Item Quantity Unit Rate In Amount
212 Steel work, welded in built up sections framed work 350.00 Kg 67.67
including cutting, hoisting, fixing in position and
applying a priming coat of read lead paint & two
coat oil paint. (A)In beams and joists, channels
angles Tees, flats, with connecting plates or angle
cleats as in main and cross beams. Hip and jack
rafters, purlins conneted to common rafters and the
213 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 15.00 Mtr 137.36
unarmoured copper cable 1.1 KV grade to be erected
as directed of following size. (E) 3 core 1.5 Sq. mm
for pressure switch
214 Providing and erecting XLPE(IS:7098)(I)-88 ISI 20.00 Mtr 257.55
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe at road crossing or floor of
following size of cable. (Only Fire Panel to Fire
Pump) (B) 3 core 4 Sq. mm
215 Providing and erecting XLPE(IS:7098)(I)-88 ISI 20.00 Mtr 426.22
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe at road crossing or floor of
following size of cable. (Only Fire Panel to Fire
Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire
216 Supply, Filling and Fixing of approved make ABC 12.00 No 1579.64
type fire extinguisher - 6 Kg. Capacity as per
217 Supply, Filling and Fixing of approved make CO2 12.00 No 4368.25
type fire extinguisher. Capacity 4.5 Kg.
(conforming to IS-15683).
218 Supply, Filling and Fixing of approved make ABC 3.00 No 2534.09
Moduler type automatic fire extinguisher. Capacity
5 Kg. (conforming to IS-15683).
219 Submitting the application to obtain Fire Plan 1.00 No 110103.13
Approval and After Completion of Work Obtain Final
Fire NOC for 3 Year.
220 Supply, Installation and commissioning of Air 2.00 No 1101.91
Release Valve, 25 mm Dia. connection.
221 Supply, Installation and commissioning of Fire 1.00 No 22021.03
Alarm Panel Conventional type, 8 zone, with
complete accessories.
222 Supply, Installation and commissioning of Audio 6.00 No 866.58
hooters , with complete accessories.
223 Supply, Installation and commissioning of Manual 6.00 No 888.80
Call Points, with complete accessories.
224 Providing and erecting XLPE(IS:7098)(I)-88 ISI 500.00 Mtr 147.46
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of cables
(A) 2 core 2.5 Sq. mm for Fire Alarm System
225 Core cutting in wall and in RCC slab with size as 15.00 No 264.62
below: 50 mm dia. Hole
226 Core cutting in wall and in RCC slab with size as 10.00 No 332.29
below: 80 mm dia. Hole
227 Core cutting in wall and in RCC slab with size as 6.00 No 412.08
below: 100 mm dia. Hole
Item Description of Item Quantity Unit Rate In Amount
228 Core cutting in wall and in RCC slab with size as 6.00 No 456.52
below: 150 mm dia. Hole
229 Fire Hydrant Panel suitable for 10 hp Jockey pump 1.00 No 99093.12
230 Pay Legal Fees to Concern Authority for Obtaining 931.01 Sqmt 15.15
Plan Approval and Final NOC
231 Point wiring for Light / Bell with 2-1.5 sq.mm & 139.00 Pt. 582.77
earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 kV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden
box, single mounting base frame covered with
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected,
with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(f) with medium class
Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete, Cat. III
232 Point wiring for Light / Bell with 2-1.5 sq.mm & 16.00 Pt. 291.39
earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 kV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden
box, single mounting base frame covered with
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected,
with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(f) with medium class
Rigid PVC pipe and accessories erected concealed
For point wiring in bathroom and W/C and
233 Point wiring for FAN with 2-1.5 sq.mm & earth wire 26.00 Pt. 809.01
of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV
Grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe
erected with 6A Modular type switch and hum free
EME step type electronic fan regulator mounted
and accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box, single
mounting base frame covered with
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected.
with necessary ceiling rose / H.D.Connector as
directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling
complete, Cat. III
Item Description of Item Quantity Unit Rate In Amount
234 Point wiring for Individual Plug with & earth wire of 40.00 Pt. 612.06
1.5 sq.mm (Green) both are of ISI marked 1.1 kV
grade FRLS PVC insulated multi strand copper wires
up to 10 mtr length, in below type of pipe erected
complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with
appropriate front plate modules erected on / in wall
/ ceiling as per pipe erected with following type of
accessories.[I] For 6A Plug and 6 a switch with 2-1.5
sq.mm Cu. Wire from nearby switchboard/mcb db
board, (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling
complete, Cat. III
235 Point wiring for on board Looped Plug with 6A 65.00 Pt. 309.06
Modular type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling with
following type accessories, Cat. III
236 Point wiring for Two Way Controlled Light Point 32.00 Pt. 725.18
with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)
both are of .ISI marked 1.1 kV grade FRLS PVC
insulated multi strand copper wires erected in
below type of pipe with 6A Modular type switches
and following type of accessories erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary batten/angle holder or
ceiling rose or H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete, Cat. III
237 Providing following type of Modular Type 8.00 Nos 160.59
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge.
(4) TV Co-axial Socket outlet, Cat.III
238 Providing following type of Modular Type 16.00 Nos 398.95
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge. (5)
Electronic hum Free steps EME Fan regulator, Cat.III
239 Providing following type of Modular Type 56.00 Nos 180.79
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge. (9)
Amp. SP one way switch, Cat.III
Item Description of Item Quantity Unit Rate In Amount
240 Providing following type of Modular Type 56.00 Nos 199.98
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge. (10)
6/16Amp. Universal socket, Cat.III
241 Providing and erecting Mains with 1.1 kV grade 975.00 Mtr. 104.03
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with
1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
following size. (A) With medium class Rigid PVC pipe
and accessories (b) 2 wire 2.5 sq. mm.
242 providing and erecting Mains with 1.1 kV grade 840.00 Mtr. 140.39
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size.
(A) with medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm
243 providing and erecting Mains with 1.1 kV grade 240.00 Mtr. 184.83
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size.
(A) with medium class Rigid PVC pipe and
accessories (b) 2 wire 6 sq. mm
244 Providing and erecting Mains with ISI marked, 1.5kV 36.00 Mtr. 115.14
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated
conforms to IS 694, IEC - 227 erected in existing pipe
of following size (Specifically for control panel,
relays, power switchgears, motor starters & control
wiring) with required size of copper lugs, nuts and
bolts if required.(f) One wire 10.00 sq. mm
245 Providing and erecting Mains with ISI marked, 1.5kV 5.00 Mtr. 177.76
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated
conforms to IS 694, IEC - 227 erected in existing pipe
of following size (Specifically for control panel,
relays, power switchgears, motor starters & control
wiring) with required size of copper lugs, nuts and
bolts if required (g) One wire 16.00 sq. mm
Item Description of Item Quantity Unit Rate In Amount
246 Providing and erecting Mains with ISI marked, 1.5kV 5.00 Mtr. 295.93
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated
conforms to IS 694, IEC - 227 erected in existing pipe
of following size (Specifically for control panel,
relays, power switchgears, motor starters & control
wiring) with required size of copper lugs, nuts and
bolts if required (h) One wire 25.00 sq. mm
247 Supplying and erecting Flexible PVC insulated multi 78.00 Mtr. 58.58
strand multi core 1.1 kV grade ISI marked copper
wires of following size to be erected as directed.(e)
1.50 Sq.mm 3 core round PVC sheathed
248 Providing & Erecting approved make following size 240.00 Mtr. 39.39
of TV Co-axial flexible cable comprising inner
conductor of solid bare copper insulated with Foam
PE & Secondary conductor made of poly -
Aluminium film bonded Al. Braids @ suitable
coverage overall sheathed with black PVC
insulation.(b) RG-6
249 Providing & Erecting Call bell gong type suitable for 8.00 Nos. 42.42
230 volts, 50 Hz. AC supply complete Erected
250 Supplying and erecting LED indoor fittings with 89.00 Nos. 373.70
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink shall
be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and
high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt, LED LED
driver efficiency > 85 % ( fitting required LM-79 &
LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)(A)
Tube Light with integral driver, (iv) 22-24 Watts,
Surge - 2KV,IP-20, conventional 4 feet, Cat.III
251 Supplying and erecting led lamps with following 74.00 Nos. 112.11
wattage capacity of 220 to 240 voltage, minimum
15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting
suitable for E14 / E27 / B22 lamp holders, pf >= 0.5,
(A) LED Lamps integral type, with PC diffuser
suitable LAMP holder, (ii) 5 to 8 watts, Cat-III
Item Description of Item Quantity Unit Rate In Amount
252 Supplying and erecting LED street light / Flood light 19.00 Nos. 4248.06
fittings with High power White LEDs wattage of
Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses, with toughened glass with company
mark/name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio > 0.45, Luminaire
efficacy > 100 lumens/watt . LED driver efficiency >
85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)(A) Street Light (IP-65),
Surge protection -4KV integral and ,Light must have
440VAC line supply with over-voltage protection.
(ii) 48 - 59 Watts, Cat-III
253 (C) Post Top Lantern LED fitting comprises of finish 2.00 Nos. 4096.56
cast aluminum spigot and spun aluminum canopy
fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired up to
terminal block.IP
(ii)32-40W, Cat-III
254 Providing and erecting Approved make Four pole 3.00 Nos. 6790.23
moulded case circuit breaker having breaking
capacity ICU of 25 KA. at 415 V,having normal
current rating up to 25 A to 100A. with Fixed
thermal & magnetic release suitable to work on A.C.
supply 50 Hz. with all internal connections, spreader
tinned copper & complete erected in existing
G.M.S.housing. ICS=100% of ICU only, Cat III
255 Providing and erecting Approved make Four pole 1.00 Nos. 8861.74
moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having normal
current rating 125A. with Fixed thermal & magnetic
release suitable to work on A.C.supply 50 Hz. with all
internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only, Cat III
256 Providing and erecting Approved make Four pole 1.00 Nos. 17843.67
moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal &
magnetic release suitable to work on A.C.supply
Hz. with all internal connections, spreader tinned
copper & complete erected in existing
ICS=100% of ICU only Cat III
Item Description of Item Quantity Unit Rate In Amount
257 Providing and erecting Approved make Four pole 1.00 Nos. 19628.04
moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal &
magnetic release suitable to work on A.C.supply
Hz. with all internal connections, spreader tinned
copper & complete erected in existing
ICS=100% of ICU only, Cat III (With Enclosure)
258 Supplying and erecting triple pole & neutral 440V / 1.00 Rmt 3202.71
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
current carrying capacity, erected with necessary
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.
(B) Suitable for 200 Amp. capacity
259 Providing and erecting Miniature circuit breaker 21.00 Nos. 297.95
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark
260 Providing and erecting Miniature circuit breaker 64.00 Nos. 123.22
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
261 Providing & erecting 240 V MCB double pole switch 21.00 Nos. 362.59
for motor & inductive load (C Curve) having 10 KA
breaking capacity & confirms to IS : 8828 in existing
box having following capacity
262 Providing & erecting 415 V MCB Four Pole for Motor 4.00 Nos. 736.29
& Inductive Load (C Curve) having 10KA breaking
capacity & confirms to IS :8828 in existing box
having following capacity
(b)40 Amp., Cat-III
263 Sheets steel powder coated enclosure suitable for 17.00 Nos. 176.75
incorporating One/Two nos. MCB.
264 Providing and erecting Sheet Steel powder coated 9.00 Nos. 1492.78
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for
(A) single phase incoming and horizontal single
phase outgoing,(b) sheet steel double door (IP-43),
Item Description of Item Quantity Unit Rate In Amount
265 providing and erecting Approved make RCCBs 17.00 Nos. 2458.34
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component. for following
Max. rating erected as directed., (ii) 40Amps. DP,
266 Providing and erecting Approved make RCCBs 1.00 Nos. 3344.11
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on 3 phase and neutral
415V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component for following
Max. rating erected as directed. (iii) 63 Amps. FP,
267 Providing and erecting Annealed bare Copper wire 25.00 Kg. 794.87
268 Providing and erecting Pipe type earthing having 3.00 Nos. 368.65
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth wire.
269 For using salt and charcoal / coke as required for 3.00 Nos. 171.70
pipe type earthing.
270 Supplying & erecting earth pit of minimum bore 4.00 Nos. 4591.46
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia
of 12mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having
back filling compound of
(B) Inner chemical (CCM Compound)- Resistivity:-
0.2 ohm / meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form,
Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain
moisture for long time Necessary test report must
be submitted by Agency.(a) For Electrical
Installation up to 440V in normal soil, Length of pipe
Back filling compound - 1 Nos Bag of 15 Kg.
Item Description of Item Quantity Unit Rate In Amount
271 Providing & erecting weather proof, dust & vermin 1.50 Nos. 14902.55
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
aluminium strips, rubber grommets, rib, bakelite
control fuses/MCB for measuring instruments, earth
bus & earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles with
locking arrangement and rubber gasket,heavy duty
end terminal connection,danger notice
board,necessary ventilation,earthing strip complete.
The Panel shall be painted with epoxy powder
(The rates excludes the cost of switchgears, bus bars,
inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied
with following approved manufacturers with
following size.
(B) The standard companies switch gear shall be
used and only manufacturers at CPRI approved
factory (i) with 350 mm depth
272 Providing , erecting , fabricating the M.S. structure as 15.00 Kg. 77.77
per requirement on site incorporating proper size of
M.S. angles,square,round, flats, bars, channels,
sections complete with cutting, welding, grinding &
finishing duly painted with one coat of red oxide
with erection on site as per direction of engineer in
charge with necessary grouting, cementing,
plastering & finishing complete.
273 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 60.00 Mtr. 341.38
ISI armoured cable multistrand Aluminium
conductor for 1.1 kV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables
(C ) 3 1/2 core 50 Sq.mm. (25 Sq.1/2 mm. core)
274 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 70.00 Mtr. 589.84
ISI armoured cable multistrand Aluminium
conductor for 1.1 kV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (E) 3 1/2 core 95 Sq. mm
(50 Sq. mm. 1/2 core)
Item Description of Item Quantity Unit Rate In Amount
275 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 450.00 Mtr. 151.50
ISI armoured cable multistrand / Solid Aluminium
conductor for 1.1 kV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables
(B) 4 core 6 Sq. mm.
276 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 105.00 Mtr. 168.67
ISI armoured cable multistrand / Solid Aluminium
conductor for 1.1 kV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables
(C) 4 core 10 Sq. mm
277 Making trench in soft soil of suitable width of 90 cm 380.00 Mtr. 55.55
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
278 Providing & laying approved make Double walled 370.00 Mtr. 62.62
corrugated pipes (DWC) of polyethylene
(conforming to IS 14930 II) with necessary
connecting accessories of same material at required
depth in existing trench for laying of cable. below
ground / road surface for enclosing cable
(A)50 mm outer dia
279 Providing & laying approved make Double walled 120.00 Mtr. 95.95
corrugated pipes (DWC) of polyethylene
(conforming to IS 14930 II) with necessary
connecting accessories of same material at required
depth in existing trench for laying of cable. below
ground / road surface for enclosing cable
(C )90 mm outer dia
280 Providing and, fixing heavy duty flange type brass 18.00 Nos. 38.38
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(B) 2 to 4 core 6 Sq. mm
281 Providing and, fixing heavy duty flange type brass 4.00 Nos. 38.38
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(C) 2 to 4 core 10 Sq.mm.
282 Providing and, fixing heavy duty flange type brass 4.00 Nos. 75.75
double compression type cable gland with rubber
ring for PVC insulated armoured cable complete
with out going tails, insulating tape etc for following
size of cables.
(B) 3 & 1/2 core 35/50 Sq. mm.
283 Providing and, fixing heavy duty flange type brass 2.00 Nos. 131.30
double compression type cable gland with rubber
ring for PVC insulated armoured cable complete
with out going tails, insulating tape etc for following
size of cables.
(D) 3 & 1/2 core 95 Sq. mm
Item Description of Item Quantity Unit Rate In Amount
284 Solder less crimping type Aluminium lugs 168.00 Nos. 6.06
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/ cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
285 Solder less crimping type Aluminium lugs 16.00 Nos. 13.13
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/ cadmium plated
nut bolts in an approved manner.(B) 10 Sq.mm.
286 Solder less crimping type Aluminium lugs 2.00 Nos. 15.15
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/ cadmium plated
nut bolts in an approved manner. (C) 16/25 Sq.mm.
287 Solder less crimping type Aluminium lugs 8.00 Nos. 20.20
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/ cadmium plated
nut bolts in an approved manner. (D) 35/50 Sq.mm.
288 Solder less crimping type Aluminium lugs 6.00 Nos. 40.40
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/ cadmium plated
nut bolts in an approved manner. (F) 95 Sq.mm.
289 Providing & erecting Approved make Power Saving 42.00 Nos. 1948.29
45 - 50 Watt Ceiling Fan with double ball bearing ISI
mark with Condenser 230 volt A.C. 50 Hz 1200 mm
sweep complete having 3blades with aluminium
blades with , canopy & 30 cm. down rod erected
with earthing.(Make shall be approved by Engineer
290 Supplying and erecting 19 / 20 mm. nominal bore 42.00 Mtr. 108.07
Medium Class M.S. Pipe down rod erected duly
painted for fan complete with proper insulation
without leakage and earthing.
291 Supplying & erecting fan hook box of 10 mm M.S. 42.00 Nos. 108.07
round bar bounded to the RCC bars up to 50mm
length each side and pierced through a 16 Gauge
M.S. box / Heavy Duty PVC box complete erected
concealed in Ceiling with necessary finishing.
Item Description of Item Quantity Unit Rate In Amount
292 Supplying and erecting approved make Octagonal 9.00 Nos. 7561.87
pole made from HR sheet steel. The pole should be
made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box
consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for
cable termination to be erected With Suitable
foundation (Included) as per details given by
manufacturer considering site requirement.
(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,
mm thickness with 200mmX200mmX12mm base
plate, 4-M16 Bolts and 600mm long with necessary
G.I. J Bolts .Approx Pole weight 46 kg
293 Supplying & erecting approved make SMC press 9.00 Nos. 476.72
moulded composite FRP. loop-in, loop-out approx.
2mm thick box complete with Bakelite connector
strip 5way (3P+N+E), DIN rail for mounting mob &
hinged doors as per requirement having locking
arrangements with mounting clamp with nuts, bolts
& washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.
(C)150mm x 125mm x 100mm [deep]
294 Supplying and erecting Street light pole bracket 6.00 Nos. 491.87
comprising main B Class GI pipe of 4.2 cm/require
outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms.length and suitable
for 76.5mm/80mm/require size of pole top having
nuts and bolts for fixing the brackets and having
spread of 0.5 mtr. Length with 110 deg.with vertical
plane and suitable welded stiffener reducer and
nipple with check nut complete painted with one
coat.of Red oxide / PU base primer and two coats of
Aluminium / PU paint. paint with following nos of
[A] Single Arm bracket 0.5 Mtr
295 Supplying and erecting Street light pole bracket 3.00 Nos. 622.16
comprising main B Class GI pipe of 4.2 cm/require
outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms.length and suitable
for 76.5mm/80mm/require size of pole top having
nuts and bolts for fixing the brackets and having
spread of 0.5 mtr. Length with 110 deg.with vertical
plane and suitable welded stiffener reducer and
nipple with check nut complete painted with one
coat.of Red oxide / PU base primer and two coats of
Aluminium / PU paint. paint with following nos of
arms. [B] Double Arm Bracket 0.5 Mtr
Item Description of Item Quantity Unit Rate In Amount
296 Supplying and erecting B class galvanised iron pipe 7.00 Nos. 343.40
32 mm outside dia 45 cm long duly welded on 20 cm
x 20 cm x 3 mm thick M.S. base plate, erected on wall
or corner for mounting street light luminaire with
necessary hardware materials duly painted.
297 Supplying & erecting approved make Digital time 2.00 Nos. 3168.37
switch having lithium cell 6 years operative and
operate battery backup 1 channel day clock with
memory programme, suitable to operate on 240V +
5%, 16A with, floating contacts Minimum switching
setup time 1 minimum & LCD display. Also
comprised permanent ON/OFF switching.
Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover
erected as required with necessary connection
erected as directed.
298 Supplying & erecting power contactor, AC3 duty for 2.00 Nos. 2782.55
time switch complete erected as per direction. (D)
pole 440V 40 Amp., Cat-III
299 Supplying and erecting approved make panel 1.00 Nos. 1275.63
mounting type Digital Voltmeter having 3 digits LED
display, 0 to 750 AC Volts range erected on existing
panel board with all connection, wiring etc .with
manufacturers calibration certificate.
300 Supplying and erecting approved make panel 1.00 Nos. 1558.43
mounting type Digital Ammeter having 3 digits
LED display, external CT operated, calibrated for
to 1000 Amps suitable to operate on 500 Volt AC,
erected on existing panel board with all connection,
wiring etc .with manufacturers calibration certificate.
301 Supplying and erecting Ammeter / Voltmeter 2.00 Nos. 317.14
selector switch for 3 phase AC Supply 500 V on
existing panel board with necessary connections.
302 Providing & erecting L.T. Current Transformer with 3.00 Nos. 274.72
bar primary 50/5 to 1000/5 ratio 15 VA burden
erected in existing CRCA box duly secured with
insulating materials connected to the meter
303 Supplying and erecting approved make suitable 3.00 Nos. 43.43
panel indicator LED type lamp, lens cover, complete
erected with necessary connections.
Item Description of Item Quantity Unit Rate In Amount
304 Supplying, Erecting, Testing & Commissioning the 1.00 Nos. 1392848.58
passenger / stretcher lift having following main
features:(A) GENERAL DESCRIPTION OF LIFTS.[1]
GEAR LESS LIFT DRIVE (MRL) comprising of High
Starting torque Lift 3 phase 440 V A. C. Permanent
Magnet Synchronous motor of proper rating with
high efficiency shall be used.[2] Micro processor
based / PLC, ACVVVF, vector control drive with
encoder feedback closed loop system shall be used
for lift car and door operation which shall be full
collective selective operation hall call demand
response, UP/DOWN hall stops, Main, Up/ Down
Contactor with overload and phase reversal relay
and safety controls.[3] Car with M S platform with
bracings of adequate size and to sustain the impact
load cabin + passenger with safety factor of fire for
steel and side panels of Stainless steel of sheet of
grade 304 duty. Car ceiling will be S.S. finishes with
aesthetic appearance with LED ceiling lights.
Car flooring shall be of s/s 304 chaker plate design
suggested of engineer in charge. of engineer in
charge. Car doors shall be of stainless steel grade
304, hairline finish with centre opening / telescopic
automatic doors. Car panel will also be S.S.
finished with emergency stop device, mechanical
door safety device, facility of auto/ attended mode.
All car panel buttons and all floor switches must be
with brail language as per lift act.[4] All landing
doors must be fire rated for 2 hour shall be fully
automatic centre opening/ telescopic opening made
of hairline finish steel grade of 304 with key holes
and infrared curtains with Unlocking facility from
[5] Appropriate battery operated emergency light in
the car along with alarm switch shall be provided.
Also, Emergency Light & Fan should start
immediately without any Time Delay as soon as
[6] Digital scrolling indicator system for up-down
arrow along with floor position indicator shall be
provided inside the car and at all floors.
Item Description of Item Quantity Unit Rate In Amount
[7] Full height infra red curtain with multiple cross /
crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be
provided accordingly of passenger capacity with
Manual Rescue Operation ( Manual Cranking
[9] Audio visual indication in the lift car showing
over loading shall be provided such that doors kept
open till excess load is removed.[10] Spring
buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with
automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall be
provided in lift car.
[13] Self diagnostics system for operational and
safety parameters shall be provided in control panel.
[14] Mechanical over speed governor with governor
calibration as per actual site parameters and
submission of calibration certificate submission,
door key holes in the floor doors, fireman switch
shall be provided.
[15] Lift machine hoisting arrangement in the lift
machine room and monkey ladder for lift pit should
be provided by the lift agency, along with the other
steel structure works, foundations for the machine
[16] In the hoist way fascia plate shall be provided
without any extra cost, where ever required as / if
directed by engineer in charge. [17] Permanent
wiring with necessary safety devices like RCCB in all
circuit, Over Voltage Under Voltage protection and
THD eliminator in circuit for lift machine room and
lift well with proper numbers of light points, with
fixtures, exhaust fan and plug points shall be
provided by the agency. Only 3 phase Power Supply
shall be made available by department in lift
machine room. Necessary Earthing as per Lift
Act/Rules shall be arranged by Lift Agency.
Item Description of Item Quantity Unit Rate In Amount
[18] Any civil/ electrical works for additional and
alteration in lift shaft and machine room related to
erection of lift shall be made by lift agency without
any extra cost. (granite/marble fixing around all
landing door openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and
documents and liaison services for obtaining all
necessary permission from lift inspector and other
authorities. [20] acrylic transparent licence/display
A4 size holder in lift car [20A] As per statutory
requirement of Govt. Of Gujarat lift & escalator act
2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4.carrying out third party lift inspection
during/after lift erection and provide report by
third party authorized by concern licensing
authority 5.agency has to provide third party
insurance up to completion of free maintenance
period and submit the document for the same.
[21] Car Panel Operating Buttons at an accessible
height from wheelchair for handicapped person and
raised numbers with brail mark with floor position
indicator/buttons must be of Auto Glow type clearly
visible when view from inside cabin.
[22] For Physically Handicapped person Full Length
Handrails of hairline finish steel grade of 304 should
be provided at appropriate 900mm height on the
Rear & Side Wall Panels in Lift Car. [23] With
Necessary kVA rating voltage controlled Stabilizer
suitable for your controller, drive and all
equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb
required for lift is in scope of work which rating is
sugested by CEICED Department (electrical
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for
PREMIUM category, 1. Advanced control system
dual 64 bit embedded microprocessor with CANBUS
Serial Communication mode including Regenerative
power efficient operation,on site programming
facility, Anti nuisance, Pte-opening, BMS/RMS with
necessary online real time monitoring system having
necessary connectivity for remote monitoring &
other suitable supporting hardware & software
devices to fulfil the purpose.2. Floor Indication LCD
Display with call registration & brail mark with
arrival gong and hall lantern & TFT Screen in the car
with MP3 Voice Announcer.
Item Description of Item Quantity Unit Rate In Amount
3. CAR Panel should be Scratch resistive SS
Moonrock finish / Hair Line / Honeycomb for car
and all Doors, All landing doors must have fire rating
up to 2 hours and car door must have multi-level
crisscross beam door protection. 4. To & fro
communication system & wiring (i.e. car , control
room & guard room ) and Each elevator are
equipped with remote monitoring system.agency
has to provide mobile app and user id and password
4/5/6 Passengers, Ground plus 4 upper floors with
Rated Speed of 1.0 m/sec.,(C) With General PLUS
ADDITIONAL SPECIAL FEATURES attached
herewith. Prem. Cat.
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures
and words) of the estimated rate mentioned above. Amount of my /our
Tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
The Contractor shall exhibit a board with detailed specification and details of work as directed by the
1 Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items
4 where there is a change as per actual mix design the cost of difference of cement consumption have been
deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt. mentioned in all the
Deputy Executive Engineer Executive Engineer
Navsari ( R & B ) Sub Division Navsari ( R & B ) Division
Navsari Navsari
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. NIT - 8 Unit Rev. Qtrs Gandevi.pdf
2. SBD - 8 Unit Rev. Qtrs Gandevi.pdf
2.1.0_GRs_2_side_All_Part_01.pdf
2.1.0_GRs_2_side_All_Part_02.pdf
2.1.0_GRs_2_side_All_Part_03.pdf
2.1.0_GRs_2_side_All_Part_04.pdf
2.1.0_GRs_2_side_All_Part_05.pdf
2.1.0_GRs_2_side_All_Part_06.pdf
3. BOQ - 8 Unit Rev. Qtrs Gandevi.pdf
4. Specification - 8 Unit Rev. Qtrs Gandevi.pdf
5. Building-Specification Booklet.pdf
6. Special Condition Electric.pdf
7.1 SBD_Specification_Electrical_Work_Part_03.pdf
7.2 SBD_Specification_Electrical_Work_Part_01.pdf
7.3 SBD_Specification_Electrical_Work_Part_02.pdf
8. MOU Electrical.pdf
9. Make List.pdf
10. Niminated Ele. Sub Contractor.pdf
11. Drawing.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .