Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 CrAdmitted-Finance C0 01 MUNIKIRETI DHALAWALA RISHIKESH UTTARAKHAND | ₹4.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.3 Cr+₹8.5 L (2.01%)Admitted-Finance | ₹4.3 Cr+₹8.5 L (2.01%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HILLWAYS CONSTRUCTION COMPANY PVT. LTD. L1 | P K INFRATECH L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 1,15,642 | Sqm. | 10 ₹11,56,420 Lowest | 11.4 ₹13,18,318.8 |
| 2.00 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. (Bitumen VG-10 @ 3.3% of the weight of mix has been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD) | 565.85 | Cum. | 7,500 ₹42,43,875 Lowest | 7,600 ₹43,00,460 |
| 3.00 | Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.509 complete in all respects.
for Grading-II (bituminous binder @ 5.4 % of mix) | 3,129.75 | Cum. | 9,350 ₹2,92,63,162.5 Lowest | 9,600 ₹3,00,45,600 |
| 4.00 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 7,901.4 | Sqm. | 450 ₹35,55,630 | 438.1 ₹34,61,603.34 Lowest |
| 5.00 | Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitable material approved by Engineer in charge (Marker must support a load of 13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per Clause No. 1707 of MORD and 804 of MORTH specifications. The RPM must have reflective panels with micro prismatic lens where area of each retro reflective surface shall not be less than 13.0 sq.cm as per MORTH clause 804.3 of section 800. The slope of retro reflective surface shall be 35 ± 5 degree to base and it shall accompany two-year warranty for satisfactory field performance from the manufacturer. | 7,800 | Nos. | 450 ₹35,10,000 | 294.8 ₹22,99,440 Lowest |
| 6.00 | Maintenance of both side earhen shoulder to achieve the approved level either by Stripping excess soil from the shoulder surface or by adding fresh approved selected soil and compacting it with appropriate equipment as directed by engineer in charge including supply of all material, labour, T&P etc. required for completion of work. | 27,300 | Sqm. | 13 ₹3,54,900 Lowest | 55.15 ₹15,05,595 |
Tender Value
Refer Docs
EMD Value
₹8.5 L
Closing Date
4 Dec 2020, 3:00 pmClosed
Superintending Engineer, 8th circle PWD, Tehri
Office of the Superintending Engineer, 8th circle PWD, New Tehri
Surface improvement work by B.C. on Pauri Devprayag Gaja Jajal motor road (Length 26.00 km.)
2020_pwd_27614_1
5077/08Cash-Tender-8/2020 Dated 12-11-2020
Open Tender
Civil Works - Roads
Item Rate
90 days
Narendranagar Block (Tehri Garhwal)
As per NIT, Technical Bid and BOQ
2 documents required · 2 mandatory
₹7,080
EE CD PWD Narenderanagar
₹8.5 L
8th circle PWD New Tehri
9 Dec 2020
20 Nov 2020
4 Dec 2020
20 Nov 2020
4 Dec 2020
21 Nov 2020
26 Nov 2020
Amount
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. (Bitumen VG-10 @ 3.3% of the weight of mix has been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD)
Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.509 complete in all respects. for Grading-II (bituminous binder @ 5.4 % of mix)
Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitable material approved by Engineer in charge (Marker must support a load of 13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per Clause No. 1707 of MORD and 804 of MORTH specifications. The RPM must have reflective panels with micro prismatic lens where area of each retro reflective surface shall not be less than 13.0 sq.cm as per MORTH clause 804.3 of section 800. The slope of retro reflective surface shall be 35 ± 5 degree to base and it shall accompany two-year warranty for satisfactory field performance from the manufacturer.
P K INFRATECH
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .