Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.7 Cr
EMD Value
₹13.7 L
Closing Date
31 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Shopping Mall in the old jail complex on the Northern side of the Goubert Market at Puducherry
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/20~EWe3fab0f9067b916040ca5213
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/20
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹13.7 L
31 Oct 2022
1 Oct 2022
31 Oct 2022
1 Oct 2022
31 Oct 2022
1 Civil Works 107,552,001.92
2 Water Supply and Plumbing Works 1,541,301.10
3 Electrical Works 10,717,004.32
4 CCTV System 3,467,784.00
5 Fire Fighting System 9,601,662.98
6 RO Plant 514,480.00
7 Passanger Lift 8 Pax 3,445,600.00
8 Air Ventilation Arrangements 516,534.83
Total 137,356,369.15
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
1 2.8.1 Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan), including dressing of
sides and ramming of bottoms, lift upto 1.5 m, including getting Cum 3,511.59 161.59 567,435.16
out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m for all kinds of soil
2 As per Item 1 with Extra for every additional lift of 1.5 m or part
thereof in excavation / banking excavated or stacked materials. All -
Kinds Of Soil
a 2.8.1 + Second Depth (1.5 to 3.00m)
b 2.8.1 + Third Depth (3.0 to 4.50m)
C 2.8.1 + Fourth Depth (4.50 to 6.0m)
3 2.25 Filling available excavated earth (excluding rock) in trenches,
plinth, sides of foundations etc. in layers not exceeding 20cm in
depth, consolidating Each deposited layer by ramming and Cum 6,533.42 143.28 936,079.84
watering, lead up to 50 m and lift upto 1.5 m.
4 2.34.1 Supplying chemical emulsion in sealed containers including delivery
as specified . Chlorpyriphos/ Lindane emulsifiable concentrate of Liter 662.00 370.98 245,588.89
5 2.35.3.1 Diluting and injecting chemical emulsion for POST -
CONSTRUCTIONAL anti-termite treatment (excluding the cost of
chemical emulsion) - tratment of soil under existing flooors using
chemical emulsion @ one litre per hole, 300mm apart including
drilling 12mm diametre holes and plugging with cement mortar 1:2
(1 cement : 2 coarse sand) to match the existing floor - with
Chlorpyriphos / lindane E.C. 20% with 1% concentration -
6 2.27A.1 Supplying and filling with gravel (excluding rock) in trenches ,
plinth, sides of foundations etc . In layers not exceeding 20 cm in
depth consolidating each deposited layers by ramming and Cum 785.00 747.16 586,523.90
watering etc .complete including all lead and lift
7 2.27 Supplying and filling in plinth with sand under floors, including
watering, ramming, consolidating and dressing complete. Cum 322.80 2,213.11 714,385.10
8 24.7 Supplying, filling, spreading & leveling coarse sand of size range
1.5 mm to 2 mm in recharge pit, in required thickness over gravel
layer, for all leads & lifts, all complete as per direction of Engineer -
in-charge.
9 24.5 Supplying , filling , spreading & leveling stone boulders of size
rage 5 cm to 20 cm,inrecharge pit, in the required thickness, for Cum 14.60 821.95 12,000.51
all leads & lifts , all complete
10 24.6 Supplying, filling, spreading and levelling gravels of size range 5
mm to 10 mm , in the recharge pit, over the existing layer of
boulders , in required thickness for all leads and lifts , all
complete
11 24.8 Gravel packing in tubewell construction in accordance with IS
:4097, including providing gravel fine / medium / coarse, in
required grading and sizes as per actual requirement , of all
complete
12 145(028 Supplying , filling , spreading & leveling Brick aggregate (single
7) size):40mm nominal size ,inrecharge pit, in the required thickness, Cum 11.00 449.58 4,945.38
for all leads & lifts , all complete
13 152(029 Supplying , filling , spreading & leveling Stone aggregate (single
5) size):20mm nominal size ,inrecharge pit, in the required thickness, Cum 0.50 1,056.10 528.05
for all leads & lifts , all complete
14 4.2D.MO Providing and laying sand gravel mix 1:1 of 150mm consolidated
thickness using 0.68cum of sand & 0.62cum of gravel for 1cum
finished to a soaked CBR value of minimum 20 including cost and
conveyance of sand and gravel to the work site and stacking to the
standard departmental gauge for premeaurement, mixing the
required quantities of sand and gravel, spreading watering and Cum 144.30 2,133.09 307,804.31
consolidation the mix by power roller rolling to achive the required
proctor density including the labour charges for mixing, spreading,
hire and fuel charges for power roller and all other tools and plants
employed etc., complete. As per clause no 401 of MOT
specification
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
15 16.68 Providing and laying 60mm thick factory made cement concrete
interlocking paver block of M-30 grade made by block making
machine with strong vibratory compaction and of approved size
and design / shape laid in required colour and pattern over and Sqm 103.00 724.10 74,581.81
including 50mm thick compacted bed of course sand , filling the
joints with coarse sand etc. all complte
16 4.1.8 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to
plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded Cum 323.10 4,907.68 1,585,653.42
stone aggregate 40 mm nominal size)
17 4.1.8 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to
plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded Cum 72.15 4,907.68 354,089.04
stone aggregate 40 mm nominal size) For Road Works
18 4.1.4 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size derived Cum 17.28 6,092.13 105,271.96
from natural sources
19 2.18.3 Close timbering over areas including strutting,shoring and packing
cavities (whwerever required ) etc. complete (measurements to
be taken of the face area timbered) . Depth exceeding 3m but
not exceeding 4.5m
20 27.17 Supplying & laying of drainage composite for use behind walls,
between two different fills, alongside drains of road, below
concrete lining of canals etc. having thermobonding a draining
core - HDPE geonet comprises of two sets of parallel overlayed ribs
integrally connected to have a rhomboidal shape with a
polyethylene film and a nonwoven geotextile having mass per unit
area 130 gsm and tensile strength of 8.0 kN/m that will be
working as separation or protecting layer, geocomposite having in Sqm 1,716.76 850.00 1,459,244.66
plane flow capacity of 0.7 L / (m.s) at hydraulic gradient of 1.0 &
20 kPa pressure and tensile strength of 13.5 kN/m , with mass per
unit area of 830 gsm, at easily accessible location including top
and bottom, with all leads and lifts, manpower and machinery,
materials, labour etc. complete and as directed by Engineer - In -
Charge.
21 5.9 Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
a 5.9.1 Centering and shuttering including strutting , propping etc and
removal of form for - foundations, footings, bases of columns etc Sqm 252.07 290.87 73,318.44
for mass concrete
b 5.9.5 Centering and shuttering including strutting , propping etc and
removal of form for - Lintels , beams , plinth beams , girders , Sqm 3,259.94 468.09 1,525,960.55
bressumers and catilevers
c 5.9.6 Centering and shuttering including strutting , propping etc and
removal of form for - Columns , Pillars , Piers , Abutments , Posts Sqm 1,229.43 685.03 842,187.49
and Struts
d 5.9.3 Centering and shuttering including strutting , propping etc and
removal of form for - Suspended floors , roofs , landings , Sqm 4,144.89 579.47 2,401,857.81
balconies and access platform
e 5.9.7 Centering and shuttering including strutting , propping etc and
removal of form for - Stairs , (excluding landings) except spiral - Sqm 167.98 527.72 88,646.43
staircases
f 5.9.2 Centering and shuttering including strutting , propping etc and
removal of form for - Walls (any thickness ) including attached
pilasters , butteresses , plinth and string courses etc.
22 5.11.1 Extra for additional height in centering , shuttering where ever
required width adequate bracing , propping etc. including cost of
de - shuttering and decentering at all levels , over a height of
3.5m, for every additional height of 1metre or part thereof (plan Sqm 1,138.73 233.63 266,040.44
area to be measured) - Suspended floors, roofs, landing , beams
and balconies (Plan area to be measured)
23 13.5E.1. Reinforced Cement Concrete in substructure complete as per
1 drawing and technical specification -RCC Grade M20 with a
minimumcement content 347 kg / cum up to 5m height -Using
concrete mixer
24 14.1E.1. Furnishing and placing reinforced cement concrete in
1 superstructure as per drawing and technical specifications - PSC
grade M40 with a minimum cement content 430 kg / cum - Using cum 125.06 10,006.94 1,251,468.27
concrete mixer - for Road Works including all machineries and
formwork, etc.l
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
25 5.33.1B Providing and laying in position machine batched and machine
mixed design mix M-30 grade cement concrete for reinforced
cement concrete work , using cement content as per approved
design mix , including pumping of concrete to site of laying but
excluding the cost of centering , shuttering , finishing and
reinforcement , including admixtures in recommended proportions
as per IS : 9103 to accelerate, retard setting of concrete , improve cum 1,595.95 7,652.08 12,212,318.10
workability without impairing strength and durability . Note:-
Cement content considered in this item is @ 330 kg / cum. Excess
or less cement used as per design mix is payable or recoverable
separately. - All work upto plinth level - Using Portland Slag
Cement
26 5.35B Add 10kg for using extra cement in the items of design mix over
and above the specified cement content therein - Using Portland Qunital 122.73 856.37 105,099.34
Slag Cement
27 5.33.2B Providing and laying in position machine batched and machine
mixed design mix M-30 grade cement concrete for reinforced
cement concrete work , using cement content as per approved
design mix , including pumping of concrete to site of laying but
excluding the cost of centering , shuttering , finishing and
reinforcement , including admixtures in recommended proportions
as per IS : 9103 to accelerate, retard setting of concrete , improve Cum 705.07 8,523.03 6,009,337.93
workability without impairing strength and durability . Note:-
Cement content considered in this item is @ 330 kg / cum. Excess
or less cement used as per design mix is payable or recoverable
separately. - All work above plinth level upto floor V level -
Using Portland Slag Cement
28 5.35 Add 10kg for using extra cement in the items of design mix over
Qunital 69.91 844.64 59,046.55
and above the specified cement content therein
29 5.22.6 Steel reinforcement for R.C.C.work including straightening ,
cutting , bending , placing in position and binding all complete
upto plinth level - Thermo -Mechanically treated bars Fe - 500 or
30 5.22A.6 Steel reinforcement for R.C.C.work including straightening ,
cutting , bending , placing in position and binding all complete
upto plinth level - Thermo -Mechanically treated bars Fe - 500 or
31 5.22.8 Providing anticorrosive treatment to HYSD reinforcement with
fusion bonded epoxy coating the rate includes cost of anticorrosive
coating including cost of powder , sand blasting, cleaning ,
induction , heating , depreciation of machinery etc, wastage in cut
Tonne 331.01 15,397.14 5,096,658.09
length of bars , provision of wooden battens between rows of
coated bars , cover to work bush pins / bar bending machines etc -
for bars of 20mm to 32 mm diametre - conforming to IS 13620 -
32 5.22.9 Providing anticorrosive treatment to HYSD reinforcement with
fusion bonded epoxy coating the rate includes cost of anticorrosive
coating including cost of powder , sand blasting, cleaning ,
induction , heating , depreciation of machinery etc, wastage in cut
Tonne 153.11 20,447.41 3,130,793.89
length of bars , provision of wooden battens between rows of
coated bars , cover to work bush pins / bar bending machines etc -
for bars of 8mm to 16 mm diametre - conforming to IS 13620 -
33 6.1.1 Providing and laying autoclaved aerated cement blocks masonry
with 150mm/230mm/300mm thick AAC blocks in sub structure
upto plinth level with RCC band at sill level and lintel level with
approved block laying polymer modified adhesive mortar all
complete .(The payment of RCC band and reinforcement shall be
made for seperately).
34 22.12 Supplying and applying bituminous solution primer on roof and / or
wall surface at 0.24 litre per sqm.
35 6.47 Providing and laying autoclaved aerated cement blocks masonry
with 150mm/230mm/300mm thick AAC blocks in super structure
above plinth level up to floor V level with RCC band at sill level and
lintel level with approved block laying polymer modified adhesive Cum 320.00 8,208.01 2,626,562.94
mortar all complete .(The payment of RCC band and reinforcement
shall be made for seperately).
36 6.38 Provding and laying autoclaved aerated cement blocks masonry
with 100mm thick AAC blocks in superstructure above plinth level
upto floor five level in cement mortar 1:4 (1 cement : 4 coarse
sand) . The rate includes providing and placing in position 2 nos 6
mm dia M.S.bars at every third course of masonry work.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
37 21.10 Providing and fixing double glazed hermetically sealed glazing in
aluminium windows, ventilators and partition etc. with 6 mm thick
clear float glass both side, having 12 mm air gap, including
providing EPDM gasket, perforated aluminium spacers, desiccants, sqm 253.15 3,535.36 894,973.51
sealant (Both primary and secondary sealant) etc. as per
specifications, drawings and direction of Engineer-in-charge
complete.
38 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm 4,159.02 227.74 947,174.30
39 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 2,836.84 218.45 619,718.00
40 13.12 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6
mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished
rough with sponge.
41 13.8.2 15 mm cement plaster on rough side of single or halfbrick wall
finished with a floating coat of neat cement of mix - 1:4 (1 cement sqm 358.00 320.28 114,658.66
: 4 fine sand)
42 13.37.1 White washing with lime to give an even shade for New work
43 13.26 Providing and applying plaster of paris putty of 2 mm thickness
over plastered surface to prepare the surface even and smooth Sqm 3,957.02 207.46 820,905.92
complete.
44 13.43.1 Applying one coat of water thinnable cement primer of approved
brand and manufacture on wall surface : Water thinnable cement Sqm 3,120.84 55.54 173,339.73
primer
45 13.60.1A Wall painting with plastic emulsion paint Royal of approved brand
and manufacture to give an even shade - two or more coats on Sqm 3,207.84 126.68 406,384.95
new work
46 13.45.1 Finishing walls with textured exterior paint of required shade -
New work (Two or more coats applied @ 3.28 ltr / 10 sqm ) over
and including priming coat of exterior primer applied @ 2.20 kg /
47 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade
: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10
48 9.1.2P Providing wood work in frames of doors , windows, clerestory
windows and other frames , wrought framed and fixed in position
with hold fast lugs or with dash fasteners of required dia & length Cum 1.04 152,826.06 159,091.93
(hold fast lugs or dash fastener shall be paid for separately) -Padak
49 9.5.2.1V Providing and fixing panelled or panelled and glazed shutters for
doors, windows, and clerestory windows, including ISI marked
M.S.pressed butt hinges bright finished of required size with
necessary screws, excluding panelling which will be paid for Sqm 15.00 5,235.68 78,535.25
separately , all complete - Kiln seasoned and chemically treated
Vengai wood - 35 mm thick shutters
50 9.72.1 Providing and fixing bright finished brass butt hinges with
necessary screws etc complete - 125 X 85 X 5.5 mm (heavy Each 7.00 324.06 2,268.44
51 9.72.3 Providing and fixing bright finished brass butt hinges with
necessary screws etc complete - 100 X 85 X 5.5 mm (heavy Each 14.00 282.73 3,958.19
52 9.74.2 Providing and fixing bright finished brass tower bolts (barrel type)
with necessary screws etc complete - 200 x 10 mm Each 14.00 372.01 5,208.10
53 9.75.1 Providing and fixing bright finished brass door latch with necessary
screws etc complete - 300 x 16 x 5 mm
54 9.76 Providing and fixing bright finished brass 100 mm mortice latch
and lock with 6 levers and a pair of lever handles of approved Each 7.00 1,305.53 9,138.70
quality with necessary screws etc. complete.
55 9.82 Providing and fixing bright finished brass hanging type floor door
stopper with necessary screws, etc. complete.
56 9.84 Providing and fixing aluminium extruded section body tubular type
universal hydraulic door closer (having brand logo with ISi, IS :
3564, embossed on the body, door weight upto 36 kg to 80 kg and
door width from 701 mm to 1000 mm), with double speed
adjustment with necessary accessories and screws etc. complete.
57 9.81.1 Providing and fixing bright finished brass handles with screws etc
complete - 125 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
58 9.147A.3 Providing and fixing factory made uPVC white colour casement
/casement cum fixed glazed windows comprising of uPVC multi-
chambered frame , sash and mullion(where ever required)
extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick
galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC
extruded glazing beads of appropriate dimension , EPDM gasket ,
stainless steel (SS 304 grade) friction hinges , zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size
for fixing frame to finished wall , plastic packers , plastic caps and
necessary stainless steel screws etc. Profile of frame & sash shall
be mitred cut and fusion welded at all corners, mullion (if required)
shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and
of approved quality , all complete as per approved drawing.(Single
/ double glass panes and silicon sealent shall be paid separately) -
Casement window double panels with top fixed with S.S. friction
hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50
mm , sash 47 x 68 mm & mullion 47 x 68 mm all having wall
thickness of 1.9 + or - 0.2mm and single glazing bead of
appropriate
59 9.147B.1 Providing anddimension . (Areamade
fixing factory of window
uPVC upto
white2.50 sqm)
colour fixed glazed
windows/ ventilators comprising of uPVC multi-chambered frame
and mullion (where ever required) extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size
according to uPVC profile), , uPVC extruded glazing beads of
appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm
size for fixing frame to finished wall, plastic packers, plastic caps
and necessary stainless steel screws etc. Profile of frame shall be
mitred cut and fusion welded at all corners, mullion (if required)
shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealant over backer rod of required size and
of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes and
silicon sealant shall be paid separately) - Fixed window / ventilator
made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm
both having wall thickness of 1.9 + or -0.2 mm and single glazing
bead of appropriate dimension. (Area upto 0.75
sqm) Fixed window size - 1.20x0.50 m
60 9.119 Providing and fixing factory made P.V.C. door frame of size
50x47 mm with awall thickness of 5 mm, made out of extruded
5mm rigid PVC foam sheet, mitred at corners and joined with 2
Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the
vertical door frame profiles to be reinforced with 19x19 mm M.S.
square tube of 19 gauge, EPDM rubber gasket weather seal to be Rm 55.00 462.67 25,446.64
provided through out the frame. The door frame to be fixed to the
wall using M.S. screws of 65/100 mm size, complete as per
manufacturer’s specification and direction of Engineerin-Charge.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
61 9.120.1 Providing and fixing factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness
and size of 19 mm x 19 mm for styles and 15x15 mm for top &
bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame covered with 5 mm
thick heat moulded PVC 'C' channel of size 30 mm thickness, 70
mm width out of which 50 mm shall be flat and 20 mm shall be
tapered in 45 degree angle on both side forming styles and 5 mm
thick, 95 mm wide PVC sheet out of which 75mm shall be flat and
20 mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115 mm wide PVC sheet out of which 75 mm
shall be flat and 20 mm shall be tapered on both sides to form lock
rail. Top, bottom and lock rails shall be provided both side of the
panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be
provided as gap insert for top rail & bottom rail, paneling of 5 mm
thick both side PVC sheet to be fitted in the M.S. frame welded/
sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15
mm wide PVC sheet beadingon inner side, and joined together
with solvent cement adhesive. An additional 5 mm thick PVC strip
of 20 mm width is to be stuck on the interior side of the 'C'
Channel using PVC solvent adhesive etc. complete as per direction
of Engineer-in-charge, manufacturer's specification & drawing. 30
62 mm thickand
11.37.2 Providing plain PVCceramic
laying door shutters
glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of commercial
quality conforming to IS : 15622, of approved make (Bell /
Johnson / Regency / Somany / Naveen / Asian) in colours such as
white, Ivory, Grey, Fume red brown ,laid on 20mm thick cement Sqm 61.00 856.62 52,253.88
mortar 1:4 (1 cement : 4 coarse sand),
including pointing the joints with white cement and matching
pigment etc., complete
63 22.5 Providing and laying water proofing treatment in sunken portion of
WCs, bathroom etc., by applying cement slurry mixed with water
proofing cement compound consisting of applying : (a) First layer
of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/ sqm. This layer will be allowed to
air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242
kg/sqm mixed with water proofing cement compound @ 0.126 Sqm 61.00 406.92 24,822.30
kg/sqm. This layer will be allowed to air cure for 4 hours followed
with water curing for 48 hours.The rate includes preparation of
surface, treatment and sealing of all joints, corners, junctions of
pipes and masonry with polymer mixed slurry.
64 11.9.6 40 mm thick marble chips flooring rubbed and polished to
granolithic finish, under layer 34 mm thick cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm
nominal size) and top layer 6mm thick with white, black, chocolate,
grey, yellow or greenmarble chips of sizes from 1 mm to 4 mm Sqm 2,920.00 709.03 2,070,357.67
nominal size, laid in cement marble powder mix 3:1 (3 cement : 1
marble powder) by weight in proportion of 4:7 (4 cement marble
powder mix : 7 marble chips) by volume, including cement slurry
etc. complete :Ordinary cement without any pigment
65 11.41.2 Providing and laying vitrified floor tiles of size 600 x600 mm
(thickeness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS: 15622 of
approved make , in all colours and shades, laid on 20 mm thick Sqm 688.00 1,278.99 879,945.26
cement mortar 1:4 (1 cement : 4 coarse sand) , including grouting
the joints with white cement and matching pigments etc.,
complete - size of tile600x600mm
66 8.12 Providing and laying flamed finish granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of the
building all complete as per the architectural drawings with 18mm
thick stone slab over 20mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry
and pointing with white cement slurry admixed with pigment of Sqm 776.00 2,538.10 1,969,563.58
matching shade including rubbing, curing and polishing etc. all
complete as specified and as - flamed finish granite stone slab Jet
black , Cherry red, Elite brown, Cat eye or equivalent
67 11.24 Extra for pre finished nosing to treads of steps of granite slabs.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
68 Providing & laying vacuum dewatered flooring (Tremix Floor) of
RCC including providing side shuttering with MS channels,
vibrating concrete by using screed vibrator and suction dewatering
using approved make equipment and finishing the top surface to
required level and grade using power trowels of standard make. Sqm 481.00 118.00 56,758.00
Rate to include for covering the finished concrete surface with 200
micron thick polythene sheet and curing. (Concrete &
Reinforcement shall be measured and paid separetely.)
69 11.36 Providing and fixing 1st quality ceramic glazed wall tiles
conforming to IS : 15622 (thickness to be specified by the
manufacturer) , of approved make (Jhonson / Asian / Somany /
Nitco) in all colours , shades of size 300 x 450 mm as approved in
skirting , risers of steps and dados, over 12mm thick bed of Sqm 207.00 1,072.94 222,098.29
cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with
grey cement slurry @ 3.3 kg per sqm, including pointing in white
cement with pigment of matching shade complete - size 300x450
70 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required
shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under
coat of primer applied @0.75 ltr/10 sqm of approved brand and
manufacture
71 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an
even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an
under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand
and manufacture.
72 9.48.1 Providing and fixing M.S. grills of required pattern in frames of
windows etc. with M.S. flats, square or round bars etc. including
priming coat with approved steel primer all complete. Fixed to
steel windows by welding .
73 10.28 Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required) and
fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories &
stainless steel dash fasteners , stainless steel bolts etc., of required KG 132.00 556.23 73,422.15
size, on the top of the floor or the side of waist slab with suitable
arrangement as per approval of Engineer-in-charge, (for payment
purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.).
74 26.80 "Providing , supplying fixing & cladding of sqm 4,799.22 aluminium
rollcoated composite panel 3 mm thick material having more than
70 % of PVdf with all coatings not exceeding AAMA at 605.2-
requirements , with anti-toxic low density polythene having
aluminium coated with chrome or polyester , polyvinylidien fluoride
of HY lar 5000 in ausimont USA & kynar 500 in Elf - Atosem will be Sqm 105.57 5,663.08 597,851.31
fixed on the anodized aluminium extruded section strucutral frame
for a wall panelling work with required projection by using MS -
cleats / angles / aluminium 'L' angles and grooves , in ACP folding
as per site requirement whereever necessary. The plain ACP
folding will be reinforced by using type system.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
75 25.8 Design supply & installation of suspended Spider Glazing system
designed to withstand the wind pressure as per IS 875 (Part-III).
The Suspended System held with Spider Fittings of SS-316 Grade
Steel of approved manufacturer with glass panel having 12 mm
thick clear toughened glass held together with SS- 316 Grade
Stainless steel Spider & bolt assembly with laminated glass fins 21
mm thick. The Glass fins and glass panel assembly shall be
connected to Slab/beams by means of SS- 316 Grade stainless
steel brackets & Anchor bolts and at the bottom using SS channel
of 50x25x2mm using fastener & anchor bolts, non staining weather
sealants of approved make, Teflon/ nylon bushes and separators
to prevent bi-metallic contacts, all complete to perform as per
specification and approved drawings. The complete system to be
designed to accommodate thermal expansion & seismic
movements etc. The joints between glass panels (6 to 8 mm) and
gaps at the perimeter & in U channel of the assembly to be filled
with non staining weather sealant, so as to make the entire system
fully water proof & dust proof The rate shall include all design,
Engineering and shop drawing including approval from structural
designer, labour, T&P, scaffolding, other incidental charges
including wastage, enabling temporary services all fitting fixers nut
bolts, washer, Buffer plates, fastener, anchors, SS channel
76 11.30 laminated and
Providing glasslaying
etc. all complete.
soft For theturfing
Korean grass purpose of payment,
including supplying
red earth,manure, river sand, labour charges for ground
preparation spreading earth and manure transportation of all and Sqm 680.00 955.29 649,598.97
maintaining the lawn for initial three months etc. complete.
77 5.28 Providing and fixing in position 12 mm thick bitumen impregnated
fibre board conforming to IS : 1838 , including cost of m primer ,
sealing compound in expansion joints
78 12.45.2 Providing and fixing false ceiling at all height including providing
and fixing of frame work made of special sections, power pressed
from M.S. sheets and galvanized with zinc coating of 120 gms/sqm
(both side inclusive) as per IS : 277 and consisting of angle cleats
of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and
37mm, at 1200 mm centre to centre, one flange fixed to the
ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia
bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required
size and other end of angle hanger fixed with intermediate G.I.
channels 45x15x0.9 mm running at the spacing of 1200 mm centre
to centre, to which the ceiling section 0.5 mm thick bottom wedge
of 80 mm with tapered flanges of 26 mm each having lips of 10.5
mm, at 450 mm centre to centre, shall be fixed in a direction
perpendicular to G.I. intermediate channel with connecting clips
made out of 2.64 mm dia x 230 mm long G.I. wire at every
junction, including fixing perimeter channels 0.5 mm thick 27 mm
high having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at 450 mm
centre, with 25mm long dry wall screws @ 230 mm interval,
including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5 x 25 mm at
79 16.18.1 230 mm with
Fencing c/c, including
angle ironjointing and finishing
post placed to adistance
at required flush finish of
embedded
in cement concrete blocks, every 15th post, last but one end post
and corner post shall be strutted on both sides and end post on
one side only and provided with horizontal lines and two diagonals
interwoven with horizontal wires, of barbed wire weighing 9.38 kg
per 100 m (minimum), between the two posts fitted and fixed with Rm 1,014.00 16.31 16,535.91
G.I. staples, turn buckles etc. complete. (Cost of posts, struts,
earth work and concrete work to be paid for separately). Payment
to be made per metre cost of total length of barbed wire used
With G.I. barbed wire
80 16.19 Supplying at site Angle iron post & strut of required size including
bottom to be split and bent at right angle in opposite direction for
10 cm length and drilling holes upto 10 mm dia. etc. complete.
81 5.28 Providing and fixing in position 12 mm thick bitumen impregnated
fibre board conforming to IS : 1838 , including cost of m primer ,
sealing compound in expansion joints
SUB TOTAL (CIVIL WORKS) 107,552,001.92
WATER SUPPLY AND SANITARY ARRANGEMENTS
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
82 18.17.1 Providing and fixing gun metal gate valve with C.I.wheel of
approved quality (Screwed end) - 25mm nominal bore
83 18.17.2 Providing and fixing gun metal gate valve with C.I.wheel of
approved quality (Screwed end) - 32mm nominal bore
84 18.11.1 Providing and fixing G.I. Pipes complete with G.I. fittings and
clamps, i/c making good the walls etc. concealed pipe, including
painting with anti corrosive bitumastic paint, cutting chases and metre 95.00 423.47 40,229.33
making good the wall : 15 mm dia nominal bore
85 18.49.1 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 15 mm nominal bore
86 17.7.1 Providing and fixing wash basin with C.I. brackets,15 mm C.P.
brass pillar taps, 32 mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting and making
good the walls wherever require:White Vitreous China Wash basin
size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
87 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make.
88 17.4.1 Providing and fixing white vitreous china flat back or wall corner
type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing cistern
with standard flush pipe and C.P. brass spreaders with brass
unions and G.I clamps complete, including painting of fittings and Each 4.00 4,480.96 17,923.82
brackets, cutting and making good the walls and floors wherever
required :One urinal basin with 5 litre white P.V.C. automatic
flushing cistern
89 17.3.1 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I.
brackets, 40 mm flush bend, overflow arrangement with specials of
standard make and mosquito proof coupling of approved municipal
design complete, including painting of fittings and brackets, cutting
and making good the walls and floors wherever required :
90 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of
quality & make as approved by Engineer in charge. Each 9.00 4,753.71 42,783.41
91 18.74.2 Providing and fixing unplasticised P.V.C. connection pipe with
PTMT Nuts, collar and bush of approved quality and colour.
18.74.1 15 mm nominal bore with 30cm length 15 mm nominal
bore with 45 cm length
92 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and
geyser points of approved quality conforming to IS:8931 15mm Each 9.00 436.54 3,928.87
nominal bore
93 19.33.1 Providing and fixing on wall / column face unplasticed - PVC soil
and waste pipes (type - B) conforming to IS : 13592- 1992
including jointing with seal ring conformation to IS : 5382 leaving metre 30.00 355.10 10,652.92
10mm gap for thermal expansion - single socked pipes -110mm
diametre
94 19.33.2 Providing and fixing on wall / column face unplasticed - PVC soil
and waste pipes (type - B) conforming to IS : 13592- 1992
including jointing with seal ring conformation to IS : 5382 leaving metre 50.00 217.47 10,873.70
10mm gap for thermal expansion - single socked pipes -75mm
diametre
95 Providing and fixing on wall face / column face unplasticised - PVC
moulded fittings / accessories for unplasticisd - PVC soil and waste
pipes conforming to IS : 14735 -1999 including jointing with seal
conforming to IS : 5382 leaving 10mm gap for thermal expansion -
a) 110 mm dia - - -
(i) Door bends Each 5.00 164.19 820.93
(ii) plain bends Each 5.00 176.63 883.17
(iii) Plain tee Each 2.00 287.35 574.71
(iv) Door tee Each 5.00 313.66 1,568.28
(v) Collars Each 5.00 119.89 599.44
a) 75 mm dia - - -
(i) Door bends Each 5.00 141.19 705.94
(ii) plain bends Each 5.00 120.31 601.56
(iii) Plain tee Each 2.00 181.70 363.39
(iv) Door tee Each 5.00 205.23 1,026.13
(v) Collars Each 5.00 82.94 414.71
96 Providing and Fixing of PVC floor trap 75 MM Each 14.00 791.78 11,084.92
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
97 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than Each 5.00 1,574.77 7,873.85
2.70 kg as per standard design: 100x100 mm size P type With
common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
98 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings , with
one step CPVC solvement cement and the cost of cutting chases Rmt 50.00 549.07 27,453.29
and making good the same including testing of joints complete -
Concealed work , including cutting chases and making good the
wall etc - 32 mm nominal outer dia pipes
99 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings , with
one step CPVC solvement cement and the cost of cutting chases Rmt 50.00 446.42 22,320.88
and making good the same including testing of joints complete -
Concealed work , including cutting chases and making good the
wall etc - 25 mm nominal outer dia pipes
100 18.7.5 Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings including fixing the pipe with
clamps at 1.00m spacing.This includes jointing of pipes & fittings Rmt 50.00 510.55 25,527.53
with one step CPVC solvent cement and testing of joints complete -
internal work - exposed on wall - 40mm nominal outer dia pipes
101 18.7.6 Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings including fixing the pipe with
clamps at 1.00m spacing.This includes jointing of pipes & fittings Rmt 55.00 383.45 21,089.90
with one step CPVC solvent cement and testing of joints complete -
internal work - exposed on wall - 50mm nominal outer dia pipes
102 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick
work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice
valve, with C.I. surface box 100 mm top diameter, 160 mm bottom
diameter and 180 mm deep (inside) with chained lid and RCC top
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size ), i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded Each 5.00 7,832.89 39,164.44
stone aggregate 40 mm nominal size ) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,
finished with a floating coat of neat cement complete as per
standard design :With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5
103 18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick
work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice
valve, with C.I. surface box 100 mm top diameter, 160 mm bottom
diameter and 180 mm deep (inside) with chained lid and RCC top
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size ), i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded Each 5.00 13,754.86 68,774.29
stone aggregate 40 mm nominal size ) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,
finished with a floating coat of neat cement complete as per
standard design :With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5
104 17.31 Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm thick hard
board ground fixed to wooden cleats with C.P. brass screws and
washers complete.
105 18.65 Providing and fixing PTMT soap Dish Holder having length of
138mm, breadth 102mm, height of 75mm with concealed fitting
arrangements, weighing not less than 106 gms.
106 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm
inlet : 100 mm diameter
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
107 17.73.2 Providing and fixing PTMT towel rail complete with brackets
fixed to wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour600 mm long towel rail
with total length of 645 mm, width 78 mm and effective height of
88 mm, weighing not less than 190 gms
108 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of
standard design and of approved make conforming to IS:8931. 15 Each 12.00 992.10 11,905.16
mm nominal bore
109 24.1.1.1 Boring / drilling bore well of required dia for casing / strainer pipe,
by suitable method prescribed in IS : 2800 (part 1) , including
collecting samples from different strata , preparing and submitting
strata chart /bore log, including hire & running
charges of all equipments, tools , plants & machineries required for
the job, all complete - upto 90 metre depth below ground level -
all types of soil - 300 mm dia
110 24.2.1.1 Boring / drilling bore well of required dia for casing / strainer pipe,
by suitable method prescribed in IS : 2800 (part 1) , including
collecting samples from different strata , preparing and
submitting strata chart /bore log, including hire &
running charges of all equipments, tools , plants & machineries
required for the job, all complete - beyond 90 metre & upto 150
metre depth below ground level -all types of soil - 300 mm dia
111 30.29 Supplying and lowering of UPVC 150mm dia Plain casing pipe
confirming to IS:12818-1992 with relevant amendments with class
designation CM and with minimum wall thickness of 7.5 mm as per
I.S.Code into the bore well with proper vertical alignments etc. RM 130.00 1,144.68 148,808.74
Including the cost of materials , but excluding the cost of labour
for positioning the assembly for lowering purpose using
contractor's rig
112 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes
Supplying, assembling, lowering and fixing in vertical position in
bore well, unplasticized PVC medium well casing (CM) pipe of
required dia , conforming to IS:12818, including required hire and RM 50.00 628.63 31,431.66
labour charges, fittings & accessories etc. all complete , for all
depths - 150 mm nominal size dia
114 31.160.1 Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
G specification 4985 and ISI marked including transportation to
the site , lowering to the trenches, laying to proper grade
and alignment, testing of joints with required
testing equipment,including cost of solvent cement,excluding RM 126.00 265.38 33,438.13
UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and
CPWD specification. - 75mm dia.
115 31.160.1 Providing, laying and jointing UPVC pipes (1 Mpa)conforming to
K IS specification 4985 and ISI marked including transportation
to the site , lowering to the trenches, laying to proper
grade and alignment, testing of joints with required
testing equipment,including cost of solvent cement,excluding RM 43.00 829.30 35,660.07
UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and
CPWD specification. - 160mm dia.
M Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the
site , lowering to the trenches, laying to proper grade and
alignment, testing of joints with required testing RM 215.00 1,748.48 375,922.51
equipment,including cost of solvent cement,excluding UPVC
specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and
CPWD specification. - 200mm dia.
117 19.35.1 Providing and laying Non Pressure NP-3 class (Medium duty)
R.C.C. pipes including collars/spigot jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) RM 31.00 2,262.97 70,152.03
including testing of joints etc. complete 450 mm dia RCC pipes
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
118 19.18.1 Supplying and fixing C.I. cover without frame for manholes
:455x610 mm rectangular C.I. cover (light duty) the weight of the No 20.00 1,071.43 21,428.56
cover to be not less than 23 kg
119 31.250.1 Supplying of electrically operated wet type submersible motor and
A pumpset AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM.The
pump shall have brass impeller, high grade
steel shaft with sufficient stages having outlet size of 2"/2.5"/3"
dia. to suit the borewell (150 / 200mm dia.), complete.The rate No 3.00 53,013.51 159,040.52
includes, all taxes, freight, etc., FOR at site in UT of Puducherry.
The pumpset shall be guaranteed for a period of one year from
the date of commissioning.(5 HP Submersible motor and
pumpset).
120 31.256.1 Supplying and fixing of fully automatic air break star-delta starter
A range for 5A to 13A F.A.S.D.with suitable M.S. angle frame etc.,
complete.- 5HP to 12.5 HP pumpsets
121 31.258.1 Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated
A copper submersible flat flexible cable of Finolex make complete.- Rm 100.00 127.02 12,701.52
upto 10HP pumpset
SUB TOTAL (WATER SUPPLY AND SANITARY
ARRANGEMENTS)
ELECTRICAL WORKS -
122 5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including
accessories , and providing masonry enclosure with cover plate
having locking arrangement and watering pipe etc. with charcoal /
coke and salt as required
123 5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick
including accessories, and providing masonry enclosure with cover
plate having locking arrangement and watering pipe of 2.7 meter Each 1.00 6,852.40 6,852.40
long etc.but without charcoal / coke and salt as required
124 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 meter below
ground level for conductor earth electode , including connection / Rm 30.00 30.88 926.42
termination with GI thimble etc. as require
125 5.8 Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre
below ground as strip earth electrode , including connection /
terminating with nut , bolt, spring , washer etc.as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut
bolt & spring washer spached at 50mm)
126 5.9 Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter
below ground as strip earth electrode , including connection /
terminating with G.I. nut , bolt, spring , washer etc.as required.
(Jointing shall be done by overlapping and with 2 sets of G.I.nut
bolt & spring washer spached at 50mm)
127 5.14 Providing and fixing 25 mm x 5 mm copper strip on surface or in
recess for connections etc as require
128 5.15 Providing and fixing 25mm x 5mm GI.strip on surface or in recess
for connections etc . as required
129 5.17 Providing and fixing 4.00 mm dia copper wire on surface or in
recess for loop earthing as required.
130 2.5.3 Supplying and fixing following way , single pole and neutral , sheet
steel , MCB disribution board , 240 V, on surface / recess ,
complete with tinned copper bus bar , neutral bus bar , earth bar ,
din bar , interconnections , powder painted including earthing etc.
as required (But without MCB / RCCB / Isolator) -12 way (4+36) ,
double door
131 1.10.3 Wiring or light point / fan point / exhaust fan point / call bell per
point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed medium class pvc conduit , with
modular switch, modular plate, suitable GI box and earthing the Point 378.00 928.49 350,971.03
point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable etc.as required - GROUP C
132 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed
medium class PVC conduit , 2 way modular switch , modular plate ,
Point 28.00 1,000.14 28,004.04
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc.as required
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
133 1.55.3 Wiring for group controlled (looped) light point / fan point /
exhaust fan point / call bell point (without indepdent switch etc.)
with 1.5 sq.mm FRLS PVC insulated copper conductor single core
cable in surface / recessed PVC conduit , and earthing the point Point 28.00 531.45 14,880.56
1.5 sq.mm FRLS PVC insulated copper conductor single core cable
etc.as required - Group C
134 Supply and Fixing of meters for shops including cost of material,
labour etc., complete.
135 1.24.1 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - 5/6 A switch
136 1.24.3 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - 15/16 A switch
137 1.24.4 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - 3 pin 5/6 A socket
outlet
138 1.24.5 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - 6 pin 15/16 A socket
outlet
139 1.24.6 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - Telephone socket
outlet
140 1.24.7 Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required - TV antenna socket
outlet
141 1.27.1 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 59.00 220.87 13,031.47
required - 1 or 2 module (75mm x 75mm)
142 1.27.2 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 59.00 242.40 14,301.34
required - 3 module (100mm x 75mm)
143 1.27.3 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 59.00 263.09 15,522.48
required - 4 module (125 mm x 75 mm)
144 1.27.4 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 29.00 322.85 9,362.59
required - 6 module (200 mm x 75 mm)
145 1.27.5 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 20.00 370.35 7,407.10
required - 8 module (125 mm x 125 mm)
146 1.27.6 Supplying and fixing following size / modules , GI box alongwith
modular base & cover plate for modular switches in recess etc. as Each 10.00 433.67 4,336.74
required - 12 module (125 mm x 125 mm)
147 1.21.1 Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
Meter 850.00 79.01 67,160.88
the wall and making good the same in case of recessed conduit as
required. 20mm
148 1.21.2 Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
Meter 2,724.70 95.10 259,108.62
the wall and making good the same in case of recessed conduit as
required. 25mm
149 1.21.3 Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
Meter 1,700.00 122.22 207,781.48
the wall and making good the same in case of recessed conduit as
required. 32mm
150 1.21.4 Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
Meter 850.00 156.76 133,248.55
the wall and making good the same in case of recessed conduit as
required. 40mm
151 1.21.5 Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including cutting
Meter 850.00 204.19 173,559.12
the wall and making good the same in case of recessed conduit as
required. 50mm
152 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required 2 Meter 569.13 143.17 81,482.00
X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
153 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required 2 Meter 1,108.00 170.12 188,493.62
X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
154 1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required 2 Meter 284.80 203.51 57,960.96
X 4 sq. mm + 1 X 4 sq. mm earth wire
155 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required 2 Meter 100.00 273.94 27,393.70
X 6 sq. mm + 1 X 6 sq. mm earth wire
156 1.14.8 Wiring for circuit / submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single core
cable in surface / recessed medium class PVC conduit as required - Meter 275.00 332.17 91,346.75
4 X 4 sq.mm + 2 x 4 sq.mm earth wire
157 1098 300mm 1400 rpm heavy duty exhaust fan Each 8.00 2,761.20 22,089.60
158 1.50.1 Installation of exhaust fan in the existing opening , including
making good the damage , connection , testing , commissioning Each 8.00 279.60 2,236.81
etc. as required - Upto 450 mm sweep
159 Supplying, Installation, testing and commissioning of 36Watt LED
Ceiling light including cost of material, labour etc., complete. Each 258.00 2,950.00 761,100.00
160 Supplying, Installation, testing and commissioning of 20Watt 4
Feet LED Tube Light including cost of material, labour etc., Each 112.00 796.50 89,208.00
complete.
161 1111 Supplying, Installation, testing and commissioning of
Geyser/Water Heater including cost of material, labour etc., Each 9.00 8,260.00 74,340.00
complete.25 ltrs. Storage water heater- ABS Make
162 4.6.6 Supplying and installing following size of perforated Hot dipped
Galvanised iron cable tray (galvanization thickness not less than 50
microns) with perforation not more than 17.5% , in convenient
Meter 302.28 1,225.51 370,447.95
sections , joined with connectors , suspended from the ceiling with
G.I.suspenders including G.I.bolts & nuts , etc .as required - 450
mm width
163 4.7.6 Supplying and installing following size of perforated Hot dipped
galvanised iron cable tray "bends" (galvanisation not less than 50
microns) with perforation not more than 17.5% , in convenient
sections , joined with connectors , suspended from the ceiling with Each 5.00 2,590.37 12,951.86
G.I.suspenders including G.I. bolts & nuts , etc.as required - 450
mm width x 50 mm depth x 2.0 mm thickness
164 4.8.6 Supplying and installing following size of perforated Hot dipped
galvanised iron cable tray "Tee" (galvanisation not less than 50
microns) with perforation not more than 17.5% , in convenient
sections , joined with connectors , suspended from the ceiling with Each 5.00 3,052.93 15,264.66
G.I.suspenders including G.I.bolts & nuts . As required - 450 mm
width x 50 mm depth x 2.0 mm thickness
165 4.9.6 Supplying and installing following size of perforated Hot dipped
galvanished iron cable tray "Cross member" (galvanisation not less
than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the Each 5.00 3,052.93 15,264.66
ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as
required - 450 mm width x 50 mm depth x 2.0 mm thickness
166 4.10.6 Supplying and installing following size of perforated Hot dipped
galvanised iron cable tray "Reducer" (galvanisation not less than
50 microns) with perforation not more than 17.5% ,in convenient
sections , joined with connectiors , suspended from the ceiling with Each 5.00 4,469.24 22,346.19
G.I.suspenders including G.I.bolts & nuts , etc.as required - 450
mm width x 50 mm depth x 2.0 mm thickness
167 1.10.3 Wiring or light point / fan point / exhaust fan point / call bell per
point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed medium class pvc conduit , with
modular switch, modular plate, suitable GI box and earthing the Point 63.00 928.49 58,495.17
point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable etc.as required - GROUP C
168 1040(30 1 x 125w MH/SVL Sonora post top/gate light lantern
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
GENSET -
169 NS Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor for
electric starting diesel generator comprising the following units:-
(Kirloskar/Leyland/Ruston/ Greaves Cotton/ Cummins make) water
cooled and shall be of multi stroke, multi cylinders, cold starting,
developing not less than 309 BHP under normal temperature and
pressure. The engine shall conform to I.S. 10002 with latest
amendments. It shall be capable of taking 10% over load for one
hour in every 12 hours of continous operation including 6 Nos. of
anti vibration pads.The engine shall be complete with the following
accessories:Electrical starting provision, engine cooling fan, fuel
and lubricating oil filters, oil bath, air filter, lub oil pressure gauge
400 litres capacity fuel tank mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24 volts electric starting
equipment complete with starter, alternator and two numbers of
12 volts with 25 plates battery of make AMCO/ STANDARD/
EXIDE/ DAGANITE (with Guarantee cards) of adequate capacity
and low lubricating oil pressure/high temperature varying engine
shut down devices.
The Acoustic enclosure shall have the following: Acoustic enclosure
shall be powder coated and fabricated out of 16 SWG CRCA MS No 1.00 1,644,005.96 1,644,005.96
sheet. The silent canopy shall be of nut bolt type construction.
Powder coating is done after seven tank surface preparation
process of sheet metal. Canopy panel and doors shall have inside
lining of FIRE-RETARDANT foam/Rock Wool as acoustic material.
Four hinged doors shall be provided to canopy, one door shall
have glass window for control panel.Base frame is fabricated either
in ISMC channel or in sheet metal. The base frame is rugged in
construction and designed for mounting engine and alternator,
with cross members mounted on AVM. The base frame shall have
provision for mounting of acoustic enclosure and it is having
provision of lifting hook for convenient lifting of complete set, i.e.
along with canopy, engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and is part of base
frame. It is duly painted and fitted with inlet and outlet
connections of suitable capacity.The Acoustic enclosure shall be
Type test approved as per CPCB norms. The average sound level,
when measure in green field condition (ISO m3744 OR 8528 PT
10) at 1-meter distance from all four sides shall be less than 75-
dBA average or as per CPCB norms. The average stabilized hot air
temperature rise with in the canopy is maintained with in 10 C
170 NS over andSupply,
Design, above ambient
erection,temperature.Acoustic enclosure
testing and Commission is suitable
250 kVA 3 phase HT Transformer with Oil Temperature Indicator.,
Earthing terminals - 3 nos., Pre-filled Silica-gel breather. Lifting
lugs for complete transformer. Thermometer pocket., Oil filling
pipe with cap on tank cover/conservator., HV TERMINALS with
Porcelain Bushings, LV TERMINALS Indoor Type Porcelain Bushings
with LT Cable box., Bi-metallic connectors on HT side., Oil level
indicator on the Oil Conservator., 4 set of wheels for movement.,
Drain cum sampling valve - 1 no., Filter Valve with plug - 1 no.,
Pressure relief explosion vent with diaphragm, Externally operated
off circuit tap changer switch with handle including all other
accessories etc., complete
Rating (KVA) -250 KVA ; No Load Voltage Ratio [KV] -11 / 0.433
KV ; Rated Current [Amp] -13.12 /333.35 Amps ; Vector Group -
Dyn11 ; Tapping Range -+5% to -10% @ 2.5% ; Tap – Changer -
Off Circuit Tap Changer ; Steps -6 Steps, 7 Positions ; Temp. Rise
(Oil/Wdg.) -40 / 45 °C ; Insulation Level -HV & LV: Uniform. ; HV
(KVp / KVrms) -75 / 28 ; LV (KVp / KVrms) -NA / 3 ;
TERMINATION: H.V / L.V Cable Box / Cable Box ; Paint- Epoxy to
Shade 631 of IS 5 ; Oil Temperature Indicator with A/T contacts ;
Winding Temperature Indicator with A/T contacts ; Buchholz Relay
with A/T contacts and with 1 Nos. Shut-off valves ; Marshalling Box
;OUTER
Magnetic Oil Level Gauge
ELECTRICAL WORKSwith Alarm Contact ; 1 No. Neutral CT -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
171 NS Supply,Transportation unloading, installation, testing and
commissioning of 11KV Double Pole Structure with the
followings and including all other accessories etc., a) 200x100mm
RS Joists- 12m Long - 2Nos , b) 11KV 400 Amps Atr Break switch-
( 3 Nos ) , c) 11KV Disc insulator- ( 3Nos ) , d) 11KV Pin Insulators- Set 1.00 472,000.00 472,000.00
(6 Nos ) , e) 11KV, 9KA Lighting arrester- (3 Nos) , f)11 KV H.G
Fuses - (3 Nos) , g) 'O' SWG Copper Solid Wire - LS , h) 100x50
ISMC - 1 Lot , i) 75x40 ISMA - 1 Lot , j) GI Bolt & Nuts of Various
Sizes -1 Lot
172 NS Supply, Transportation unloading, installation, testing and
commissioning of HT Metering Cubicle comprising of the
followings and including all other accessories etc., (a) LBS:
11KV/250MVA/630A LBS Fuse Trip and Earth Switch-1 No, (b) HT
Fuse: 25A HT HRC Fuse-3 Nos, c) Potential Transformer- Epoxy
Resin Cast-PH , Ratio 11KV/110V, Core 15 VACLO.2 ACCY- 3 Nos , Set 1.00 247,800.00 247,800.00
(d) Current Transformer Epocy Resin Cast-PH, Ratio: 5A, Core 5V
CL0.2S- 3 Nos, (e) Meter: TOD Meter-0.25 & R/Y/B/ON/OFF/TRIP
INdicator Lamp, Emergency Push Botton, Space Heater/
Illumination lamp, 8 Window Annuciator, Hooter etc., complete
173 NS Supply, Transportation unloading, installation, testing and
commissioning of Main MV Panel comprising of the followings
and including all other accessories etc., EB Incomer : 1 No 400A
4Pole MCCB ; DG Incomer: 1 No 400A 4Pole MCCB ; Busbar: 400A
TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars
shall have half the capacity of phase busbars ; Outgoing : 1 No 63
A TPN MCCB with releases , 2 Nos 160 A TPN MCCB with releases ,
4 Nos 200 A TPN MCCB with releases , 1 Set of RYB indication Set 1.00 141,600.00 141,600.00
lamp, 1 No Multifucntion meter ; Wall mounting type fabricated
with 16 SWG CRCA sheet enclosure. Door and partition shall be 18
SWG CRCA Sheet. The Panel shall be complete with suitable
interconnections and earthing etc. All doors should have proper
locking/ sealing arrangements.
174 NS Supply, Transportation unloading, installation, testing and
commissioning of Main Lighting Panel comprising of the
followings and including all other accessories etc., EB Incomer : 1
No 63A 4Pole MCCB ; Busbar: 63A TPN Aluminium Busbars 35KA
per 1 Sec. All the neutral busbars shall have half the capacity of
phase busbars ; Outgoing : 2 Nos 32 A TPN MCCB with releases ,
3 Nos 40 A TPN MCCB with releases , 1 Set of RYB indication lamp, Set 1.00 87,320.00 87,320.00
1 No Multifucntion meter , Wall mounting type fabricated with 16
SWG CRCA sheet enclosure. Door and partition shall be 18 SWG
CRCA Sheet. The Panel shall be complete with suitable
interconnections and earthing etc. All doors should have proper
locking/ sealing arrangements.
175 NS Supply, Transportation unloading, installation, testing and
commissioning of Main Power Panel comprising of the followings
and including all other accessories etc., , EB Incomer : 1 No 200A
TPN MCCB , Busbar: 200A TPN Aluminium Busbars 35KA per 1 Sec.
All the neutral busbars shall have half the capacity of phase
busbars , Outgoing : 6 Nos 32 A TPN MCCB with releases , 2 Nos
63 A TPN MCCB with releases , 1 Set of RYB indication lamp, 1 No Set 1.00 99,120.00 99,120.00
Multifucntion meter , Wall mounting type fabricated with 16 SWG
CRCA sheet enclosure. Door and partition shall be 18 SWG CRCA
Sheet. The Panel shall be complete with suitable interconnections
and earthing etc. All doors should have proper locking/ sealing
arrangements.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
176 NS Supply, Transportation unloading, installation, testing and
commissioning of 75 KVAR Capacitor Panel comprising of the
followings and including all other accessories etc., ; EB Inc , 2 Set
32A TPN 25KA MCCB and AC 16A contractor with ON/OFF push
/indication lamp and 5 KVAR Capacitoromer: 1 No 200A TPN MCCB
; Capacitor: 25 KVAR Capacitor-1 Nos,15KVAR Capacitor-2 Nos,
10KVAR Capacitor-1 No, 5KVAR Capacitor -2 Nos APPC Busbar:
200A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral
busbars shall have half the capacity of phase busbars , APPC
Outgoing : 1 Set 100A TPN 25KA MCCB and AC 20A contractor
with ON/OFF push /indication lamp and 25 KVAR Capacitor, 2 Set Set 1.00 159,300.00 159,300.00
63A TPN 25KA MCCB and AC 40A contractor with ON/OFF push
/indication lamp and 15 KVAR Capacitor , 1 Set 32A TPN 25KA
MCCB and AC 20A contractor with ON/OFF push /indication lamp
and 10 KVAR Capacitor ; Wall mounting type fabricated with 16
SWG CRCA sheet enclosure. Door and partition shall be 18 SWG
CRCA Sheet. The Panel shall be complete with suitable
interconnections and earthing etc. All doors should have proper
locking/ sealing arrangements.
177 NS Supply, Transportation unloading, installation, testing and
commissioning of Lighting LDB in Basement comprising of the
followings and I ncluding all other accessories etc., Incomer: 1 No
16 A TPN MCCB Outgoing: 3 Nos 16A TPN MCCB Wall mounting
type fabricated with 16 SWG CRCA sheet enclouser, Door and
partition 18 SWG CRCA sheet. The Panel shall be complete with
iterconnections and earthing etc.,
178 NS Supply, Transportation unloading, installation, testing and
commissioning of Lighting LDB in Stilt Floor & Theater
comprising of the followings and including all other accessories
etc., Incomer: 1 No 25A TPN MCCB ; Outgoing: 3 Nos 16A TPN
MCCB ; Wall mounting type fabricated with 16 SWG CRCA sheet
enclouser, Door and partition 18 SWG CRCA sheet. The Panel shall
be complete with interconnections and earthing etc.
179 NS Supply, Transportation unloading, installation, testing and
commissioning of LSB in First Floor & Second Floor comprising
of the followings a , Bus Bar: 40A TPN Aluminium Bus barnd
including all other accessories etc., , Incomer: 1 No 40A TPN MCCB
, Outgoing: 8 Nos 32A TPN MCCB , Wall mounting type fabricated Set 2.00 84,960.00 169,920.00
with 16 SWG CRCA sheet enclouser, Door and partition 18 SWG
CRCA sheet. The Panel shall be complete with interconnections
and earthing etc., , The Panel shall be complete with
iterconnections and earthing etc.,
180 NS Supply, Transportation unloading, installation, testing and
commissioning of LSB in Third Floor comprising of the followings
and including all other accessories etc., , Incomer: 1 No 40A TPN
MCCB , Outgoing: 5 Nos 32A TPN MCCB , Bus Bar: 40A TPN
Aluminium Bus bar , Wall mounting type fabricated with 16 SWG Set 1.00 74,930.00 74,930.00
CRCA sheet enclouser, Door and partition 18 SWG CRCA sheet.
The Panel shall be complete with interconnections and earthing
etc., , The Panel shall be complete with iterconnections and
earthing etc.,
181 NS Supply, Transportation unloading, installation, testing and
commissioning of SLDB comprising of the followings and
including all other accessories etc., Incomer: 1 No 16A DP MCB , Set 9.00 106,200.00 955,800.00
Outgoing: 12 Nos 6/10A SPMCB , The Panel shall be complete with
iterconnections and earthing etc.,
182 NS Supply, Transportation unloading, installation, testing and
commissioning of Phase Segregated 4 Way DB comprising of
the followings and including all other a ccessories etc., Incomer: 1
No 25A TPN MCB ; Outgoing: 3 Nos 16A DP MCB, 12 Nos 6/10A SP
MCB ; The Panel shall be complete with interconnections and
earthing etc.,
183 NS Supply, Transportation unloading, installation, testing and
commissioning of Power Distribution Board VTPN Type 8 Way
compri , Outgoing: 4 Nos 25/32A TPN MCB, 12 Nos 10/25A SP
MCBsing of the followings and including all other accessories etc., Set 1.00 25,960.00 25,960.00
Incomer: 1 No 63A TPN MCCB , The Panel shall be complete with
interconnections and earthing etc.,
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
184 NS Supply, Transportation unloading, installation, testing and
commissioning of Power Distribution Board VTPN Type 8 Way
compri ; Outgoing: 4 Nos 16/25A TPN MCCB, 12 Nos 10/16A SP ;
The Panel shall be complete with interconnections and earthing Set 1.00 23,600.00 23,600.00
etc.,MCCBsing of the followings and including all other accessories
etc., Incomer: 1 No 21A TPN MCCB
185 NS Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet
, with 2 pole and earth , metal enclosed plug top along with 20 A
"C" curve , SP,MCB, in sheet steel enclosure , on surface or in
recess , with chained metal cover for the socket out let and
complete with connections , testing and commissioning etc.as
required.
186 NS Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including
accessories , and providing masonry enclosure with cover plate
having locking arrangement and watering pipe etc. with charcoal /
coke and salt as required.
187 NS Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick
including accessories, and providing masonry enclosure with cover
plate having locking arrangement and watering pipe of 2.7 meter Set 2.00 6,852.40 13,704.80
long etc.but with charcoal / coke and salt as required.
188 NS Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter
below ground as strip earth electrode , including connection /
terminating with nut , bolt, spring , washer etc.as required.
Meter 300.00 699.95 209,985.72
(Jointing shall be done by overlapping and with 2 sets of brass nut
bolt & spring washer spaced at 50mm)
189 NS Providing and fixing 4.00 mm dia copper wire on surface or in
Meter 300.00 105.41 31,622.82
recess for loop earthing as required
190 NS Supply and Transportation of XLPE insulated IS:7098/II/85
H.T.cable for working voltage 11 K.V Earthed with Stranded
Compacted Circular Aluminium Conductor Screened with Extruded
Semi-conducting compound, XLPE Insulated Screened with
extruded semi-conducting compound in combination with Copper Meter 50.00 3,813.76 190,688.00
Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised
flat steel strip armoured and overall Extruded PVC Type ST- 2
Outer Sheathed cable etc complete. 3.5 core 185 Sqmm
191 NS Laying of one number PVC insulated and HT PVC sheathed / XLPE
power cable of 11kV grade of following size direct in ground
including excavation, sand cushioning, protective covering and Meter 50.00 520.70 26,034.93
refilling the trench etc.as required - above 120 sq.mm and upto
192 NS Supplying and making indoor cable end jointing with cast resin
compound , including lugs and other jointing materials , for
following size of 3 core , XLPE aluminium conductor cable of 11 kV
grade sa required - 185 Sq.mm
193 NS Supply and transportation of following XLPE insulated, 1100V
grade armoured alluminium cable as per specification confirming to
IS:7098 (Part - I)./1554-I
a NS 31/2 x 185 Sqmm Meter 250.00 2,298.64 574,660.00
b NS 31/2 x 120 Sqmm Meter 35.00 1,546.98 54,144.30
c NS 31/2 x 95 Sqmm Meter 5.00 1,240.18 6,200.90
d NS 31/2 x 50 Sqmm Meter 25.00 731.60 18,290.00
e NS 31/2 x 35 Sqmm Meter 10.00 613.60 6,136.00
f NS 31/2 x 25 Sqmm Meter 10.00 450.76 4,507.60
g NS 4 x 16 Sqmm Meter 90.00 369.34 33,240.60
h NS 4 x 10 Sqmm Meter 20.00 309.16 6,183.20
i NS 4 x 6 Sqmm Meter 10.00 256.06 2,560.60
j NS 2 x 10 Sqmm Meter 10.00 118.00 1,180.00
k NS 2 x 6 Sqmm Meter 200.00 88.50 17,700.00
194 NS Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 kV grade of following size direct in ground
including excavation , sand cushioning, protective covering and Meter 50.00 414.71 20,735.55
refilling the trench etc.as required - Upto 35 sq.mm.
195 NS Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 kV grade of following size direct in ground
including excavation , sand cushioning, protective covering and Meter 50.00 426.23 21,311.39
refilling the trench etc.as required - above 35 sq.mm and upto
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
196 NS Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 kV grade of following size direct in ground
including excavation , sand cushioning, protective covering and Meter 250.00 437.74 109,436.15
refilling the trench etc.as required - above 95 sq.mm and upto
197 NS Laying and fixing of one number PVC insulated and PVC sheathed
/ XLPE power cable of 1.1 kV grade of following size on wall
Meter 350.00 31.66 11,080.79
surface as required - upto 35 sq.mm (clamped with 1mm thick
saddle)
198 NS Laying and fixing of one number PVC insulated and PVC sheathed
/ XLPE power cable of 1.1 kV grade of following size on wall
Meter 30.00 89.00 2,669.87
surface as required - above 35 sq.mm and upto 95 sq.mm
(clamped with 25 x3mm MS flat clamp)
199 NS Laying and fixing of one number PVC insulated and PVC sheathed
/ XLPE power cable of 1.1 kV grade of following size on wall
surface as required - above 95 sq.mm and upto 185 sq.mm Meter 35.00 104.39 3,653.81
(clamped with 25 / 40 x 3mm MS flat clamp)
200 NS Laying and fixing of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 kV grade of following size on cable tray as Meter 25.00 26.63 665.82
required - upto 35 sq.mm
201 NS Laying and fixing of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 kV grade of following size on cable tray as
Meter 25.00 61.84 1,546.10
required - above 35 sq.mm and upto 95 sq.mm (clamped with
1 mm thick saddle)
202 NS Laying and fixing of one number PVC insulated and PVC sheathed
/ XLPE power cable of 1.1 kV grade of following size on cable tray
as required - above 95 sq.mm and upto 185 sq.mm (clamped Meter 25.00 77.23 1,930.78
with 25 / 40 x 3mm MS flat clamp)
203 NS Supplying and making cable route marker with cement
concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) of size 60 cm x 60 cm at the
Per no 10.00 441.32 4,413.20
bottom and 50 cm x 50 cm at the top with a thickness of 10 cm
including inscription duly engraved as required.
204 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 138.00 123.61 17,057.49
1.1 kV grade as required - 2 X 6 sq.mm (19mm)
205 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 4.00 124.89 499.56
1.1 kV grade as required - 2 X 10 sq.mm (19mm)
206 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 4.00 130.54 522.17
1.1 kV grade as required - 4 X10 sq.mm (25 mm)
207 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 6.00 132.77 796.64
1.1 kV grade as required - 4 X16 sq.mm (28 mm)
208 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 2.00 135.38 270.76
1.1 kV grade as required - 31/2 X25 sq.mm (28 mm)
209 NS Supplying and making end termination with brass compression
gland and aluminium lugs for following size of PVC insulated and
PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade Per set 2.00 164.20 328.39
as required - 31/2 X35 sq.mm (32 mm)
210 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 2.00 172.87 345.74
1.1 kV grade as required - 31/2 X50 sq.mm (28 mm)
211 NS Supplying and making end termination with brass compression
gland and aluminium lugs for following size of PVC insulated and
PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade Per set 2.00 241.52 483.04
as required - 31/2 X95 sq.mm (45 mm)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
212 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 4.00 262.66 1,050.62
1.1 kV grade as required - 31/2 X120 sq.mm (45 mm)
213 NS Supplying and making end termination with brass
compression gland and aluminium lugs for following size of PVC
insulated and PVC sheathed / XLPE aluminium conductor cable of Per set 8.00 348.23 2,785.84
1.1 kV grade as required - 31/2 X185 sq.mm (57 mm)
SUB TOTAL (ELECTRICAL WORKS) 10,717,004.32
CCTV System
A Field Equipment
214 NS Full HD Varifocal dome type IP colour camera, 2 MP Resolution, IK
10, 64GB SD Card, 2.8- 12mm Motorized Lens along with all
accessories required including powder coated / OEM supplied
backbox, bracket/fixture/Angle for fixing of camera in wall /
true ceiling / false ceiling . Camera Shall include atleast 6 Edge
based analytics includig motion detection, video tampering, line
crossing etc.
215 NS Full HD Varifocal Bullet type IP colour camera, 2 MP Resolution, IK
10, 64GB SD Card, 2.8 -12mm Motorized Lens along with all
accessories required powder coated / OEM supplied backbox,
bracket/fixture/Angle for fixing of camera in wall / true ceiling
/ pole mount. Camera Shall include atleast 6 Edge based analytics
includig motion detection, video tampering, line crossing etc.
216 NS Outdoor Full HD PTZ (Pan,Tilt,Zoom) type IP colour camera, 2MP
Resloution, 36X , IK 10, 64GB SD Card along with all accessories
required including pole / wall mount brackets. Camera Shall
include atleast 8 Edge based analytics includig motion detection, No. 3.00 76,700.00 230,100.00
video tampering, line crossing, object classification ( human /
vehicle), object tracking etc.
217 NS 4K UHD Bullet Camera, 8MP Resloution, IK 10, 64GB SD Card, 2.8-
12mm Motorized Lens along with all accessories required
including powder coated / OEM supplied backbox,
bracket/fixture/Angle for fixing of camera in wall / true ceiling
/ false ceiling .Camera Shall include atleast 8 Edge based analytics
includig motion detection, video tampering, line crossing, object
classification ( human / vehicle), object tracking etc.
218 NS 24-Port Managed PoE Gigabit Ethernet Switch 22 x 100/1000 Base-
T PoE ports + 2 100/1000 Fx SFP PORTS, Input Voltage : 230V
AC, Operating Temperature : 0 C to +45˚C,19" Rack Mount, Min
15W per port, Management & Diagnosis features, ERPS, No 1.00 44,840.00 44,840.00
supporting PoE-af and PoE-at, supports IPv4/IPv6, Spanning Tree
IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP
219 NS 12-Port Managed PoE Gigabit Ethernet Switch 10 x 100/1000 Base-
T PoE ports + 2 100/1000 Base T or SFP Combo Ports PORTS,
Input Voltage : 230V AC, Operating Temperature : 0 C to
+45˚C,19" Rack Mount, Min 15W per port, Management & No 3.00 30,680.00 92,040.00
Diagnosis features, ERPS, supporting PoE-af and PoE-at, supports
IPv4/IPv6, Spanning Tree IEEE802.1d STP, IEEE802.1w RSTP,
IEEE802.1s MSTP
220 NS 6U Wall Mount Rack with all mounting accessories, locking steel
cabinet, vented at sides, front, top and bottom for floor switches No. 4.00 11,328.00 45,312.00
221 NS Oudoor Weather Proof Camera Junction Box,IP55 Rated
(350x350x300mm) with 4 Port PDU + MCB, DIN Rail accessories /
provisions for mounting Switches, Power supply unit and LIU,
Surge Protection Device
222 NS 230V AC / 24 to 30 V DC 5 A Industrial Grade Power Supply Unit
for External Camera / switches in junction box
223 NS 4mtr high hot dip galvanised poles with 3mm thickness. HT sheet
alongwith base plate of size 150X150X10mm thickness along with
4Nos of M20x600 mm long 'J' type EN8 grade foundation bolts Lot 3.00 20,060.00 60,180.00
along with template, Required Foundation for Poles, Lightig
Protection and Earthing
B IT infrastructure at CCTV Room ( Main Block Basement)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
224 NS Rack Mount Network Video Recorder with storage for 60
days,recording at 18 FPS, 1080P resolution, 24 Hrs a day (
continuos recording)., H.265 compression, with RAID 5 storage
configuration ( N+1) storage redundancy including all rack mount
accessories, ONVIF S and G Profile for third party camera
interface. Embedded VMS Software for Video Management and
Video recording (including Software for Remote Viewing on
Web and Mobile app)
225 NS Client Workstation for viewing, monitoring and system
management including all required licensed software, Power
Distribution Units, 32 inch LED Monitor, Keyboard and Mouse
226 NS Graphical User Interface based Client Software (per
workstation basis) for workstation
227 NS Digital Key-Board (Joystick) compatible with P/T/Z cameras
along with all installation accessories
228 NS LED Monitors Monitor (40" or Higher) along with all
accessories required for installation
229 NS 24-Port Managed PoE Gigabit Ethernet Switch 22 x 100/1000 Base-
T PoE ports + 2 100/1000 Fx SFP PORTS, Input Voltage : 230V
AC, Operating Temperature : 0 C to +45˚C,19" Rack Mount, Min
15W per port, Management & Diagnosis features, ERPS, No. 1.00 44,840.00 44,840.00
supporting PoE-af and PoE-at, supports IPv4/IPv6, Spanning Tree
IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP
230 NS 24 Port Fully Loaded UTP Patch Panel No. 1.00 8,850.00 8,850.00
231 NS 19” 32U racks along with all accessories like electrical fitting
(power strip, MCB etc.), Fan tray, Patch Panel etc. Required for No. 1.00 47,200.00 47,200.00
installation of the equipment
232 NS UPS of minimum capacity of 1.5 KVA or as per load calculation
(whichever is higher) for entire CCTV control room equipment with
30% spare capacity for future load connection for minimum back
up time of 1 hour at full load (rated capacity) along with stand, No. 1.00 94,400.00 94,400.00
supports for mounting of the UPS and batteries ,monitoring
software etc complete as per specification and tender document.
233 NS CCTV Control Room Accessories including network cables, patch
cords, power junction box, closed raceways, cables & conduit, MCB No. 1.00 11,800.00 11,800.00
etc for CCTV equipment
C Video Analytics - - -
234 NS Rack Mount Server for Video Analytics along with all
accessories required as per system and tender requirements No 1.00 413,000.00 413,000.00
235 NS Software (per camera basis) for Video Analytic, portable No. 5.00 17,700.00 88,500.00
236 NS Software (per camera basis) for Facial Recognition System,
portable
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
D Supply/Blowing/Pulling/Laying/Fixing/Clamping of
various Cables/PVC pipe/GI pipe/Tray/HDPE
237 NS 50mm Dia HDPE pipe HDPE Pipes manufactured in strict
accordance to the requirements of : 4984-1995, ISO: 4427-96 and
DIN: 8074-99 for physical dimensions and tolerances with latest Meter 60.00 88.50 5,310.00
amendments, minimum wall thickness of 3.5 mm including all
accessories to be laid in trench,
238 NS 25 mm Dia Hot dip galvanized GI Conduit ISI Marked as per IS
9537 Part:II,Hot Dipped Galvanized on inner and outer surfaces
using 7 tank processes to provide excellent resistance to corrosion.
Suitable for harsh environments and can be used where the
installation will be indoors, outdoors, concealed, or underground,
Shielding from Electromagnetic Interference, tolerace of ouside
diameter not more than 0.4mm, 1.6 mm wall thickness with all Meter 180.00 330.40 59,472.00
accessories including GI Bends, Inspection Bends, Couplers,
Junction Boxes, Inspection T, Checknut and GI Saddle ( single /
two / three / four way ). Saddle shall not be placed more than 300
mm apart. GI Elbow not acceptable. Only Inspection Bends be
used wherever cable bend is required.
239 NS 32 mm Dia Hot dip galvanized GI Conduit ISI Marked as per IS
9537 Part:II,Hot Dipped Galvanized on inner and outer surfaces
using 7 tank processes to provide excellent resistance to corrosion.
Suitable for harsh environments and can be used where the
installation will be indoors, outdoors, concealed, or underground,
Shielding from Electromagnetic Interference, tolerace of ouside
diameter not more than 0.4mm, 1.6 mm wall thickness with all Meter 150.00 448.40 67,260.00
accessories including GI Bends, Inspection Bends, Couplers,
Junction Boxes, Inspection T, Checknut and GI Saddle ( single /
two / three / four way ). Saddle shall not be placed more than 300
mm apart. GI Elbow not acceptable. Only Inspection Bends be
used wherever cable bend is required.
240 NS UTP CAT 6 , 4 Pair, LSZH cable to be laid in HDPE / GI conduit.
241 NS Supply of PVC insulated 3 core 1.5 Sq. Mm armoured cable
for UPS supply distribution (as per BIS/ISI standards)
242 NS Supply and fixing of 32mm PVC conduit pipe (ISI mark) including
all saddle spacers, bends, T, Coupbers and Junction Boxes for wall
mount / ceiling mount , metal reinforced flexible drops above false
ceiling
243 NS Excavation - Digging & Refilling ( for HDPE Conduit) and Refilling.
Pls refer the trench specification below
SUB TOTAL (CCTV SYSTEM) 3,467,784.00
244 FIRE FIGHTING SYSTEM -
A CIVIL WORKS -
1 EXCAVATION : -
NS Excavating trenches of required width for pipes and fittings etc.
including dressing of sides, ramming of bottom depth upto 1.5
Mtrs including getting out the excavated soil and then returning
the soil as required in layers not exceeding 20 cms in depth
including consolidating each deposited layer by ramming, watering,
etc. and disposing of surplus excavated soil as directed within a
lead of 150 mtrs (pipe not exceeding 300 mm).
In ordinary soil. Cum 80.00 621.05 49,684.21
2 RCC HUME PIPE: - - -
NS Providing, Laying. Testing & Commissioning of RCC hume pipes of
NP2 class with suitable collars filling the recess at joints of pipes
with hemp dipped in hot bitumen or other suitable compound for
chaulking of joint by jack, setting up of loose space over the collar - - -
joints caulked with CM 1:2, finished both ends to a slope of 1:1
including curing, testing of pipes, etc., complete.
200 mm dia Rmt 40.00 2,422.11 96,884.21
3 SLAB / WALL CORECUTTING: - - -
NS Drilling with core cutting machine in RCC beams,slabs floors,etc.,
for laying pipes and rendering thesame in RCC 1:2:4, finishing the
same to the satisfaction of the owner or his authorized
representative etc., including nominal reinforcement wherever - - -
required, complete. The quoted rate shall alsoinclude for providing
EPOXY based water proofingcompound for sealing the joints
around the pipes.
RCC walls/ beams ( upto 400 mm thk) - - -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS 50mm dia upto 110 mm dia. Nos. 4.00 1,314.15 5,256.59
NS 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 2.00 1,676.84 3,353.68
B FIRE HYDRANT SYSTEM - - -
1 UNDER GROUND PIPING - - -
Supplying, installing, testing and commissioning of G.I Pipes, ERW
confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm
dia and pipes 200mm dia and above shall be G.I as per IS: 3589
(6mm Wall thick) with painting, suitable type of supports, anchor
fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable - - -
specials such as Reducers,Tees, elbows, flanges. Including cutting,
Welding, fixing in / on walls, ceiling by using suitable supports etc,
complete.
PIPE TO EXTERNAL YARD HYDRANT - - -
NS a) 150 mm dia. Rmt 50.00 3,997.09 199,854.74
NS b) 80 mm dia. Rmt 40.00 2,075.56 83,022.32
2 PIPING ABOVE GROUND : - - -
Supply, errect, jointing, testing and commissioning of heavy class
G.I pipes (as per IS-1239). The pipes being fixed on to the wall or
suspended from the ceiling / truss with angle iron supports
complete with bends, tees, flanges and with all other required
accessories including painting of the pipeline with two coats of
approved enamel paint over a coat of anti corrosive primer etc.
complete. As per IS code standards.Rate quoted above shall
include providing M.S.supports in angle iron / plates pipes etc. at
every 2.5 m c/c. Rate quoted shall include for supply and providing - - -
necessary, welding cutting, 'U' clamps both nuts, washers etc.as
per specification or pipe supports for horizontal / vertical pipes
running along wall / column, slabs trenches etc to suit different dia
pipes made of GI/MS rods, flats etc. consists of strap, nuts
washers, threaded rod etc., rate quoted shall also include
necessary aniti corrosive painting and 2 coat f approved enamel
colour paint
NS a) 80 mm dia. Rmt 80.00 1,676.84 134,147.37
NS c) 150 mm dia. (Basement ceiling, external yard hydrant and
risers)
3 BUTTERFLY VALVE: - - -
Supplying, Installing, testing and commissioning CI butterfly valves
as per BS 5155 ( PN 10/16) slim seal standard lever operated type
with required flanges, nuts, bolts etc. complete.
NS a) 100 mm dia. (To FBIC) Each 1.00 2,593.52 2,593.52
4 AUTOMATIC AIR RELEASE VALVES (TERRACE LVL FOR
WET RISER) :
Supply, fixing, testing and commissioning of Air release valves
screwed ends of approved brand of manufacture, with - - -
accressories,etc complete
NS 25 mm dia. Each 2.00 1,552.63 3,105.26
5 BALL VALVE (for arv) - - -
Supplying, installing, testing and commissioning of heavy duty Gun
Metal gate valves screwed ends of approved brand of - - -
manufacture.PN-10
NS a) 25 mm dia. Each 2.00 965.12 1,930.23
6 NON RETURN VALVE (TERRACE LVL FOR OHT OUTLET ) :
Supply, fixing, testing and commissioning of Non return valve
falnged end of approved brand of manufacture, with - - -
accressories,etc complete. PN:10
NS 150 mm dia-PN 10 Each 1.00 10,613.79 10,613.79
7 INTERNAL FIRE HYDRANT SYSTEM : - - -
NS a)1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE
outlet hydrant valve with chain and cap of GM gunmetal. Nos 13.00 7,471.26 97,126.42
NS b)2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs
long with 63 mm gunmetal male and female instantaneous Nos 13.00 10,049.87 130,648.36
coupling.
NS c) 63 mm Gunmetal branch pipe with hexagonal detachable 16
mm nozzle, made instantaneous coupling etc. complete. Nos 13.00 2,136.42 27,773.47
NS d) Hose reel drum with 19 mm dia bore reinforced rubber hose of
length 40 Mtrs length fitted with 6.35 mm dia. nozzle. The hose
reel drum shall be recessed swinging type with reel drum hose nos 13.00 10,606.34 137,882.38
provided with coupling as per detailed specification.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS e) Internal hose cabinet frame (1200 x 900 x150) fronted with
hinged & lock made out of 16 G M.S. sheet with powder coated
paint of to suit internal fire duct opening to accommodate the Nos 13.00 9,149.35 118,941.52
following accessories as mention above :-
8 EXTERNAL FIRE HYDRANT SYSTEM ( GROUND LVL) :
SINGLE HEADED YARD HYDRANT : - - -
NS Supply, fix, test and commissioning of the following :- - - -
NS a) 80 mm dia GI MSDF bend.80 mm dia GI MSDF stand pipe (1 Mtr
below + 1 Mtr above).The pipe portion below ground shall be with
anti corrosive treatment as per detail specifications
NS b) 1 No. 63 mm dia female instantaneous pattern oblique hydrant
valve with chain and cap of gun metal
NS c) 2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I (ISI mark)
15 Mtrs long with 63 mm gun metal make male and female Nos 4.00 12,392.48 49,569.94
instantaneous coupling.
NS d)63 mm gun metal branch pipe with gun metal hexagonal
detachable 16 mm nozzle, made instantaneous coupling etc. Nos 4.00 2,136.42 8,545.68
complete.
NS e) M.S. Hose cabinet stand mouted type fabricated out of M.S.
sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber
beeding) door and size of the cabinet shall be 600mm x 750 mm
x 250 mm Quoted rate shall be includes suitable stand for Nos 4.00 8,014.06 32,056.25
mounting, all fasteners etc, and cabinet shall be powder coated of
approved colour both inside and out side.
9 TWO WAY FIRE BRIGADE INLET: - - -
NS a) Two nos. 63 mm dia Gun metal instantaneous inlet arranged on
a 100 mm dia GI header with flanges. b) 1 nos. 100 mm dia LS 1.00 12,141.58 12,141.58
Butterfly valves ( PN10) Insitu moulded
10 FOUR WAY FIRE BRIGADE INLET: - - -
NS a) 4 nos. 63 mm dia Gun metal instantaneous inlet arranged on a
150 mm dia GI header with flanges. b) 1 No. 150 mm non-return
valves.- (PN16) c) 1 no of 150 mm dia Butterfly valves ( PN16) LS 1.00 16,604.46 16,604.46
Insitu moulded. d) 1 no of 100 mm dia Butterfly valves( PN16)
Insitu moulded
C SPRINKLER PIPING - - -
1 INSTALLATION CONTROL VALVE (GROUND LVL) - - -
Supply,fixing and commissioning of Installation control valve
consting of :- a) 1 No. alarm valve and bell b) 2No. Main stop
valve. c) Pressure guage, drain valve and piping etc., as per
specification
NS a) 150 mm dia Nos 1.00 60,388.86 60,388.86
2 UNDERGROUND PIPING : - - -
Supply, erect, jointing, testing and commissioning heavy class G.I
pipe (as per IS-1239) in trenches (1 Mtrs below ground level) with
necessary supports at equal interval. Rate quoted shall include for
necessary specials like long radius bends, tees, including
cutting,welding / flanged joints with necessary washers, nuts, - - -
bolts,etc. Rate quoted shall also include for providing concrete
anchor blocks (thrust block) at all change in direction of pipeline
and also near each joints and also providing wrapping and coating
for anticorrosive treatment as per specfication.
PIPE FROM PUMP ROOM TO ICV - - -
NS a) 150 mm dia. Rmt 15.00 2,207.78 33,116.70
3 SPRINKLERS - - -
a) UPRIGHT SPRINKLERS - - -
NS Providing and fixing nominal bore quartzoid bulb type sprinkler 68
Deg.C standard response upright type with suitable fittings Nos 232.00 695.02 161,244.64
complete.
b) PENDANT SPRINKLERS - - -
NS Providing and fixing nominal bore quartzoid bulb type sprinkler 68
Deg.C quick response pendent type with suitable fittings Nos 294.00 695.02 204,335.88
complete. - K 80
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
c) SIDE WALL TYPE SPRINKLERS. - - -
NS Providing and fixing nominal bore quartzoid bulb type sprinkler 68
Deg.C extended coverage side wall type with sutiable fittings Nos 8.00 695.02 5,560.16
complete. - K 80
4 ABOVE GROUND PIPING : - - -
Supply, erection, testing, jointing and commissioning of heavy
class GI pipes conforming to IS 1239. Pipe specials such as bends,
tees, reducers, etc. shall confirm to ASTM A 234 Gr WPB forged
fittings. The pipe shall be with flanged joints / weld joints. Rate
quoted shall include for necessary pair of flanges gaskets, nuts,
bolts, etc., for pipes being suspended from ceilings beam bottom,
clamped on to the walls, etc., and fittings upto 50mm socket
welded type, 65 and above should be butt welded type.and
complete.Rate quoted below shall include providing, fixing as pipe
supports from column/wall or suspenders from roof slab to suit
various dia of pipes made out of GI adjustable rods threaded for a
sufficient length to adjust the height of support along with
clamping arrangement for holding pipes of anchor fastening
arrangement design of hanger and should confirm to specification.
(pipe support - 25 mm dia to 50 mm dia @ every 1.5 m c/c and 65
mm to 100 mm dia @ every 2.5 m c/c)Also rate quoted shal
include necessary pipe supports for 150 dia with supply and fixing
of channel, angle iron, flats as per drawing / instruction at site to
suit site condition, including for necessary G.I 'U' clamps, welding,
cutting, nuts, washers, etc., rate quoted shall also include for
giving one coat of zinc chromate primer and two coats of approved
enamel paint for pipe supports.Rate quoted shall include the insert
NS plate,
a) anchor
25 mm dia.fastners to fix the plates. Also it shall include Rmt 1,000.00 472.00 472,000.00
NS G)32 mm dia Rmt 280.00 618.32 173,129.60
NS c) 40 mm dia. Rmt 400.00 729.24 291,696.00
NS d) 50 mm dia Rmt 210.00 958.16 201,213.60
NS e) 65 mm dia. Rmt 310.00 1,208.32 374,579.20
NS f) 80 mm dia Rmt 300.00 1,506.86 452,058.00
NS g)100 mm dia Rmt 44.00 2,177.10 95,792.40
NS h)150 mm dia Rmt 130.00 3,144.70 408,811.00
5 SPRINKLER DRAIN UNIT AND FLOW SWITCH UNIT. - - -
b) FLOW SWITCHES. - - -
Supplying, installing, testing and commissioning flow switch on
sprinkler distribution header on each floor and shall be connected
to fire alarm panel through cable. Cable shall be measured
seperately.
NS b)80mm dia Each 8.00 7,136.64 57,093.12
6 SPRINKLER CONTROL VALVE,TEST VALVE AND AIR
RELEASE VALVE.
a) BUTTERFLY VALVES : - - -
Supplying, Installing, testing and commissioning CI butterfly valves
as per BS 5155 (PN10/ PN16) slim seal standard lever operated
type with required flanges, nuts, bolts etc. complete( with lock and
key arrangement)
NS a)150mm dia- PN10 Each 3.00 3,346.48 10,039.44
NS b)80mm dia- PN10 Each 10.00 2,027.24 20,272.40
b) AUTOMATIC AIR RELEASE VALVES : - - -
Supply, fixing, testing and commissioning of Air release valves
screwed ends of approved brand of manufacture, with - - -
accressories,etc complete- PN10
NS 25 mm dia. Nos 2.00 1,069.08 2,138.16
c) BALL VALVE - - -
Supplying, installing, testing and commissioning of heavy duty Ball
valve screwed ends of approved brand of manufacture. PN10 - - -
NS a) 25 mm dia. Nos 2.00 902.70 1,805.40
D SIGNAGES - - -
1 Providing and installing in position the following type of sign
boards made out of 3mm thick "Opaque" PVC foam board with
computer cut, PVC non-reflective self adhesive vinyle painted foam
board, complete with mirror fasteners.
NS a) Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS
INSTRUCTED OTHERWISE" of 1.5cm height letters in red with
white back ground.The size of the board shall be 25cm x 30 cm Nos 10.00 558.95 5,589.47
and shall be fixed at the height of 2 mts. from finished floor near
Manual call points.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS b) Floor indentification signage ( ie, GROUND FLOOR …etc.) at
each stair enclosure on every floor, indicating the floor number in
words, lettering size shall be 7.5 cm with contrasting colour from Nos 10.00 496.84 4,968.42
back ground.Size shall be 15cm x 60cm.
2 Providing and fixing in position the signages " FIRE ORDER" it
should contain the following matter on 3mm thick "Opaque" PVC
foam board of computerised cut, PVC non-reflective self adhesive
vinyle painted foam board of 3' x 4'.a) Alert the security at
security at security room by actuating MANUAL CALL POINT
located at strategic location.b) Evacuate the occupant by using
FIRE EXITS AND EMERGENCY EXITS ONLY and assenbly at various Nos 2.00 3,105.26 6,210.53
addembly pointsc) If possible try to extinguish the fire by using
nearest/suitable portable extinguishers or water from nearest wer
riser.d) Be calm and do not give an roon from panic, walk, do not
run.e) If you encouner serious difficulty in evacuaton, flat and try
to attract attention of rescue team.
3 Action by security / Reception upon receipt of information through
fire alarm or fire detector or by using public address system.A)
Alart the occupants by using public address system.B) Inform fire
control through any one of the following phone number: 101/Local
nos.c) Refer evacuation plan from evacuating standard people.d)
Guide the fire force, on their arrival to the seat of fire.E) in case of
the casualties, call ambulance by dialling number…..
E FIRE EXTINGUISHERS - - -
1 Supplying, installing and commissioning Portable Fire extinguishers
of following type & capacity.
a Fire extinguisher of 6 Kgs - - -
NS Supply and install in position approved make ABC Stored
pressure type Fire Extinguisher of 5 kgs capacity, fitted with
discharge control valve (sq.grip type) CE marked and pressure
gauge, filled with mono ammonium phosphate powder as per EN 3
615 approval, with discharge hose and open nozzle and supplied
complete with initial charge as per IS: 15683 with ISI mark and
wall bracket. Fire Rating 3A, 21B
b ABC STORE PRESSURE Fire Extinguisher 2 Kgs capacity
NS Supply and install in position approved make ABC Stored pressure
type Fire Extinguisher of 2 kgs capacity, fitted with discharge
control valve (sq.grip type) CE marked and pressure gauge, filled
with mono ammonium phosphate powder as per EN 3 615
approval, with discharge hose and open nozzle and supplied
complete with initial charge as per IS: 15683 with ISI mark and
wall bracket. Fire Rating 3A, 21B
c CO2 Fire Extinguisher - 4.5Kg capacity. - - -
NS Supply and install in position approved make CO2 Stored pressure
type Fire Extinguisher of4.5 kgs capacity, fitted with discharge
control valve (sq.grip type) CE marked and pressure gauge, filled
with mono ammonium phosphate powder as per EN 3 615
approval, with discharge hose and open nozzle and supplied
complete with initial charge as per IS: 15683 with ISI mark and
wall bracket. Fire Rating 3A, 21B
d CO2 Fire Extinguisher - 2.0 Kg capacity. (Kitchen & inside
NS Supply and install in position approved make CO2 Stored pressure
type Fire Extinguisher of 2.0 kgs capacity, fitted with discharge
control valve (sq.grip type) CE marked and pressure gauge, filled
with mono ammonium phosphate powder as per EN 3 615
approval, with discharge hose and open nozzle and supplied
complete with initial charge as per IS: 15683 with ISI mark and
wall bracket. Fire Rating 3A, 21B
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
e Water Mist Fire Extinguisher - 4.0Ltrs capacity. - - -
Supply and install in position approved make water mist Fire
Extinguisher o 6.0 Ltr capacity, fitted with discharge control valve
(sq.grip type) CE marked and pressure gauge, fwith discharge
hose and open nozzle and supplied complete with initial charge as
per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A
NS 9.0 Ltrs Nos. 10.00 8,071.20 80,712.00
f FIRE BUCKETS WITH ABC FIRE EXTINGUISHER :(PARKING
NS Supply and installation of approved make ABC- 5.0 Kg fire
extinguisher& Fire Bucket of 24 guage, galvanised steel sheet of
standard 9 Ltrs capacity and ABC extinguisher 5 kg(Stored
pressure type). Bucket shall be round bottom shape,fire bucket
stand & suitable M.S supports & painted round bottom shape,fire
bucket stand & suitable M.S supports & painted white inside and Nos. 18.00 88.50 1,593.00
red outside and black on the bottom dome with letters 'FIRE' in
black and gold with wall mounting bracket and screws.(1sets-4nos
buckets & stand) Rate quoted shall include floor mounted stand as
approved by archt.
F 2 WAY TALK BACK SYSTEM : - - -
Talk back console and with CRCA sheet housing,with necessary
input ,output devices and control desk( rack) as required. Console
shall have all call / call back facility complete and it should also
work on AC single phase power.
NS a) 5 ZONE @ Ground level Nos 1.00 47,200.00 47,200.00
2 Supplying, installing, testing and commissioning solid state
Amplifier out put in rack, including neccessory control wires, jacks - - -
etc. complete.
b)100 W amplifier (@ Reception desk) Nos 1.00 29,500.00 29,500.00
3 CABLES :
Supplying, installing, testing and commissioning 40 strand twin
core control cables of PVC insulated copper conductor, Confirming
to IS 1554, as per specification.
4 CONDUITS :
Supplying, installing, testing and commissioning approved make
25mm P.V.C. conduits on ceiling / wall / floor etc. complete with Rmt 40.00 76.70 3,068.00
accessories like, Junction boxes, Collars, Bends etc.
H FIRE PUMP ROOM EQUIPMENT - - -
NS 1 Supply, Erection, testing & commissioning of electrical motor
driven Hydrant Pump of horizontal centrifugal end suction
backpull out type with gland packing and capable to deliver
2280LPM (137 m³/ Hr) at 70 MWC with all necessary
accessories like bronze impeller, stainless steel shaft and
mechanical seal along with anti-vibration mounting, coupling,
coupling guard and base plate for pump, fabricated mild steel
channel,foundation bolts, and pump should have the dry run
sensor provision, etc., as per local fire brigade requirement . The No. 1.00 637,790.00 637,790.00
pump shall capable to have 3.5 kg/cm² residual pressure at top
most hydrant point. The pump shall be coupled to electrical motor
of 65 HP with speed of 2900 RPM, Electric supply 415V, 50 Hz
and complete set shall be mounted on a common base frame. The
gaurd and Foundation bolts etc. RCC foundation is under civil
scope.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS 2 Supply, Erection, testing & commissioning of Diesel Engine
driven common stand by pump, horizontal centrifugal end
suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 70MWC with all necessary
accessories like bronze impeller, stainless steel shaft and
mechanical seal along with anti-vibration mounting, coupling, gear
box, base plate for pump, fabricated mild steel channel with
foundation bolts etc., It includes providing and fixing fuel oil tank
(capacity as per TAC requirements) with supports and necessary
pipe works for diesel engine, battery and battery charger to be
connected to control panel of diesel engine and exhaust silencer
including necessary pipe work and lagging, pump should have the
dry run sensor provision, etc., and shall be automatic in operation
diesel engine control panel with 24V DC storage battery & its
battery charger with required Ampere - hour rating, terminal box
(2 nos. of 12volts), cooling water line for engine with required
pipes / valves / fittings etc., as per TAC including all associated
electrical works. The pump shall capable to have 3.5 kg/cm²
residual pressure at top most hydrant point. The pump shall
coupled to Diesel engine, radiator water cooled type with speed of
1800RPM and complete set shall be mounted on common base
frame. Batteries & battery leads with stand, 200 liters capacity Fuel
NS 3 tank ( for
Supply, 4 Hrs. operation
erection, testing & )commissioning
with stand & gauge glass, Fuel
of electrical piping
driven Jockey pump of horizontal centrifugal end suction
back pull out type with gland packing and capable to deliver
180LPM (10.8 m³/ Hr) at 70 MWC with all necessary
accessories like bronze impeller, stainless steel shaft and
mechanical seal along with anti-vibration mounting pad and
flexible connections at discharge end of the pipes, pump should
have the dry run sensor provision etc. and shall be automatic in No. 1.00 347,789.47 347,789.47
operation.The pump shall be coupled to motor of 15 HP with
speed of 2900RPM and complete set shall be mounted on common
base frame. The quoted rate shall includes providing & fixing of
coupling, coupling gaurd and Foundation bolts etc. RCC foundation
is under civil scope.foundation is under civil scope
NS Supply, Erection, testing & commissioning of electrical motor
driven Hydrant Pump of horizontal centrifugal end suction backpull
out type with gland packing and capable to deliver 2280LPM (137
m³/ Hr) at 70 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-
vibration mounting, coupling, coupling guard and base plate for
pump, fabricated mild steel channel,foundation bolts, and pump
should have the dry run sensor provision, etc., as per local fire
brigade requirement . The pump shall capable to have 3.5 kg/cm² No. 1.00 5,900.00 5,900.00
residual pressure at top most hydrant point. The pump shall be
coupled to electrical motor of 65 HP with speed of 2900 RPM,
Electric supply 415V, 50 Hz and complete set shall be mounted
on a common base frame. The quoted rate shall includes providing
& fixing of coupling, coupling gaurd and Foundation bolts etc. RCC
foundation is under civil scope.
NS 4 Supply, Erection, testing & commissioning of electrical motor
driven Water curtain Pump of horizontal centrifugal end suction
backpull out type with gland packing and capable to deliver
2280LPM (137 m³/ Hr) at 40 MWC with all necessary
accessories like bronze impeller, stainless steel shaft and
mechanical seal along with anti-vibration mounting, coupling,
coupling guard and base plate for pump, fabricated mild steel
channel,foundation bolts, and pump should have the dry run
sensor provision, etc., as per local fire brigade requirement . The No. 1.00 5,900.00 5,900.00
pump shall capable to have 3.5 kg/cm² residual pressure at top
most hydrant point. The pump shall be coupled to electrical motor
of 65 HP with speed of 2900 RPM, Electric supply 415V, 50 Hz
and complete set shall be mounted on a common base frame. The
gaurd and Foundation bolts etc. RCC foundation is under civil
scope.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
5 Control Panel for Fire pumps. - - -
NS Fabrication, Supplying, Installation, Testing & Commissioning of
electrical control panel, of cubical construction, floor mounted
type, fabricated out of 2mm thick CRCA sheet, compartmentalised
with hinged lockable doors, dust and vermin proof, powder coated
of approved shade after 7 tank treatment process, cable alley,
inter-connection, having switchgears and accessories mounting Set 1.00 180,105.26 180,105.26
and internal wiring, earth terminals, numbering etc. complete in all
respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC
supply with enclosure protection class IP 42 as required.
(ii) OUTGOING. - - -
NS Diesel Engine Control.
Control for Diesel Engine comprising:-
timers and relays as required, push buttons, start/stop in manual
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Set 1.00 59,993.68 59,993.68
Temp.and Engine ON indication.
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and
(iv) AII standard relays and accessories for automatic operation of
diesel engine.
(iii) 1100 V GRADE POWER / CONTROL CABLES - - -
Supplying, laying, testing & commissioning of FRLS, XLPE
insulated, PVC outer sheateh, steel armoured, aluminium / copper
conductor, 1100v grade power cables with glands etc. The cables
shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc.
as required. For cables laid out door the rate shall include earth - - -
excavation providing brick and sand protection, refilling and
compacting the earth.The rate shall excludes tray & Hume
pipes.The minimum size of the cables shall as mentioned below,
NS a) 2R x 3.5 core x 50 sqmm Aluminium conductor cable for
Electrical motor Driven pump.
NS b) 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump.
NS c) 12 core x1.5 sqmm Copper cable for Diesel Engine pump
NS d) 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 25.00 300.59 7,514.74
NS e) 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking.
(Iv) CABLE TRAY - - -
NS Supplying and fixing of perforated G.I.sheet cable tray with
neccessory angle iron suspension supports, anchor fasteners etc.
complete. Maximum height of suspension shall not exceed 500 Rmt 30.00 1,329.05 39,871.58
mm.Size of the tray shall be suitable for laying the above
mentioned cables.
(v) ELECTRONIC LEVEL INDICATOR : - - -
NS Supply, fixing, testing and commissioning of electronic type level
indicaor of approved make with pressure transducer,
alarm,sensors, LED display for indicating high, half full and low
level in sump (ground level reservoir) Rate quoted shall include for
supply and laying necessary armoured control cablling inside Set 1.00 40,492.63 40,492.63
pumphouse (approx. length 30 meters) for connecting sensors to
panels located inside pumphouse, wiring from the control panel to
sensor probes, ON / OFF indicators etc. complete in all respects.
(vi) VALVES AND STRAINERS : - - -
SLUICE VALVES : Tank outlet; Supply, install, testing &
commissioning of CI sluice valves of approved make as per IS 780
Class I with necessary flanged tail piece, compansion flanges, - - -
bolts, nuts, gaskets, etc.,complete in all respects. PN 10 rating
NS 200 mm dia. Each 1.00 41,567.05 41,567.05
STRAINER :Tank outlet - - -
NS Supply, Installation , Testing & Commissioning of MS Fabricated
Pot/Basket Strainer with accessories etc., complete. 200 mm dia Each 1.00 44,138.21 44,138.21
NON RETURN VALVE: - - -
NS Supply, Installation , Testing & Commissioning of NON RETURN
VALVE with accessories etc., complete.-PN16 150 mm dia. Each 4.00 8,083.00 32,332.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
SLUICE VALVE: - - -
a) Supplying, Installing, testing and commissioning CI Sluice valves
as per BS 5155 ( PN 16) slim seal standard lever operated type
with required flanges, nuts, bolts etc. complete.
NS 150 mm dia. Each 6.00 8,083.00 48,498.00
BUTTERFLY VALVE - - -
b) Supplying, Installing, testing and commissioning CI butterfly
valves as per BS 5155 ( PN 10) slim seal standard Gear operated
type with required flanges, nuts, bolts etc. complete. (For Delivery
Header)
NS 100 mm dia. Each 1.00 12,570.11 12,570.11
NS 150 mm dia. Each 1.00 13,570.00 13,570.00
FLOW METER: - - -
NS a) Supplying, Installing, testing and commissioning of Flow meter
with necessary accessories as per standard specifications etc Each 1.00 88,500.00 88,500.00
complete. 150 mm dia.
NS (viii) Supplying, installing, testing and commissioning of Gun metal
chrome finished Ball valves with fittings of screwed end type. 25
mm nominal dia (for pressure switch manifold & air vessel tank)
NS (ix) Supply and installation of differential Pressure switches of suitable
range (0 to 12 bar) for pumpsets complete with necessay Ball
valves, Fittings like unions / colors / reducers etc.
NS (x) Supply and installation of Pressure gauges of suitable range (0-16
bar), 110 mm diameter dial for pumpsets completes with
necessary Ball valves, siphon, Fittings like unions / colors /
reducers etc.
NS (xi) Supply, fixing, testing and commissioning of air vessel tank shall
be fabricated out of of 250 mm dia MS pipe to 1000 mm long
complete with 25mm inlet, 25mm drain, 25mm dia connection for
air release valve including legs, painting with red oxide primer and No. 1.00 36,424.74 36,424.74
finished with fire red enamel paint. It shall be inclusive of all
relevant pipes, valves, specials upto pump header and other
accessories etc.
NS (xii) Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade
with mineral wool insulation with aluminum sheet. The quoted rate
shall include 100 mm diameter MS pipe medium grade conforming
to IS 1239 Part-1 and mineral wool insulation with aluminum
sheeting and Pipe supports also.
G INTELLIGENT ADDRESSABLE FIRE ALARM & DETECTION
SYSTEM
1 FIRE ALARM CONTROL VALVE : - - -
Supply, erection, testing and commissioning of Micro Processor-
controlled Intelligent adressible Main Fire Alarm Control Panel to
monitor loop panels located in at Ground floor with dual stage
alarm facilities, hooter, fire / fault indicators, audio-visual signals,
battery, battery charger, central processing unit, video display unit,
provision for printer, password protected, loop powered hooters,
etc. intigration complete in all respects as per detailed
specification.(preferable:125 Detectors + 125 devices per loop).
Panel must be capable of True Peer-to-Peer Networkable
Addressable Fire Alarm Control Panel with minimum 600 characters
LCD display, 4000 event plus 1000 alarm log history events,
QWERTY keypad for programming. The panel shall work in
degrade mode in case of CPU failure. Four access levels. The panel
must be capable of cross zoning facility. The Panel shall have 24
Hours backup and 4 Hrs emergency backup. Panel should be UL
10th Edition and FM approved to meet industry highest standards.
rate quoted shall also include panel with provision to expand for 2
addittional Loops in future and installation of software for
programming (mapping) the Fire detection and voice alarm system
through FACP / Lap top. The software shall consisting with facility
like Upload / down load of informations to FACP, Graphics
compatible to autocad, Detectors information with change in
NS address
b) / sensitivity
4-Loop etc as Panel
upto 8 loops reuired.
FIRETheALARM
rate quoted shall also
CONTROL PANEL :
GROUND LVL
NS c) Cost for addition / deletion of extra Loop cards in to the panel
mentioned above.
2 HEAT DETECTORS : - - -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS Supply, Installation, Testing & Commissioning of Addressable Rate
of Rise Heat Detector rated at 9.4 deg C/min. The detector shall
have twin bi-colour LED for 360 deg viewing. Addressing shall be
with user friendly rotary decimal switches.
UL 7th edition
3 COMBINATION DETECTORS (MULTISENSOR ): - - -
NS Supply, installation, testing and commissioning of Addressable
Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5
to 4.0% obs/ft.The intelligent multi criteria detection device shall
include the ability to combine the signal of the thermal sensor with
the signal of the photoelectric signal in an effort to react hastily in
the event of a fire situation. It shall also include the inherent ability
to distinguish between a fire condition and a false alarm condition
by examining the characteristics of the thermal and smoke sensing Nos 114.00 2,938.20 334,954.80
chambers and comparing them to a database of actual fire and
deceptive phenomena. The detector shall have twin bi-colour LED
for 360 deg viewing. Addressing shall be with user friendly rotary
decimal switches. ( COMMON AREA AND ABOVE FALSE CEILING
AREAS)
4 RESPONSE INDICATOR : - - -
NS Supply, installation, testing and commissioning of Response
indicator with led indicator mounting base etc., as per
specification
5 FIRE ALARM DEVICES - MCP, HOOTER AND PA SPEAKER (ADDRESSABLE) - - -
NS a) Supplying, installing, testing and commissioning approved make
Electronic Dual tone type Hooters with power supply 24v DC (Horn
cum Strobe rated at 82 Dba @ 3m for Audible annunciation and
75cd flashintg at 1 Hz for visual indication), 6WSpeaker with talk
back facility and addressable Manual call points Break glass type-
UL Listed
NS a) Supplying, installing, testing and commissioning Sounder
Control Module.
NS b) Supplying, installing, testing and commissioning Addressable
Manual call points.
NS c) Supplying, installing, testing and commissioning of PA Speaker
with necessary accessories. 6 Watts (Two way talk back). Nos 10.00 737.50 7,375.00
6 FAULT ISOLATION MODULAE : - - -
NS Supply,installation, testing and commissioning of intelligent
Addressable Fault isolator module capable of monitoring shorted
loop circuit and automatically restore communications when Nos 16.00 3,422.00 54,752.00
shorted conditions are corrected.UL Listed
7 CABLE : - - -
NS Supply, testing and commissioning of 1100V Grade 2 core of 1.5
sqmm PVC insulated FRLS(armoured) Twisted Pair cable for
connecting detectors / devices to panels and main micro processor
control panels located in the respective floors including end
termination with indentification tags at each end, etc., Rmt 1,800.00 135.70 244,260.00
complete.The quoted rates shall be inclusive of necessary juntion
boxes made of M.S 16 SWG with cutouts for incoming & outgoing
cables in respective floors. (RED COLOUR)
8 CONTROL Relay MODULAE : - - -
NS Supply, Installation, Testing & Commisioning Addressable Relay
Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire
Suppression & other Third Party Outputs. The relay module shall
provide DPDTcontact rated at 24v DC, 2A. The device shall have
an LED which shall blink in normal state & get steady on activation Nos 10.00 3,540.00 35,400.00
to monitor the heath status of the device. Addressing shall be with
user friendly rotary decimal switches. Module shall be supplied
with mounting plate from OEM for ease of installation &
maintenance.UL Listed
9 MONITOR MODULAE : - - -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
NS Supply, Installation, Tsting & Commisioning Addressable Monitor
Module for Sprinklers, Panic Bars & other Third Party Inputs. The
monitor module shall monitor potential free contacts. The device
shall have an LED which shall blink in normal state & get steady on
activation to monitor the heath status of the device. Addressing Nos 10.00 3,540.00 35,400.00
shall be with user friendly rotary decimal switches. Module shall be
supplied with mounting plate from OEM for ease of installation &
maintenance. UL Listed
10 PERFORATED CABLE TRAY : - - -
Supply and fixing of Perforated Cable Trays Upto 300mm size
shall be of 2mm thick with 50mm flange, pre – galvanized.. Above
300mm size shall be of 2mm thick with 75mm flange, pre –
galvanized,bolted type.) Rate shall exclude necessary angle iron
support and M10 full threaded down rods, M10 anchor
fasteners,40x40x6mm MS channels etc., complete as per technical - - -
specification. Maximum height of suspension shall not exceed
500mm. The support shall be provided at every 1 Mtr.The Cable
tray supports upto 450 mm wide Rod support ,More than 450mm
wide Ms channel Support.
NS b) Size : 300X50mm wide - 2mm thick Rmt 40.00 1,150.50 46,020.00
11 BEAM DETECTOR WITH REFLECTOR: - - -
NS Supply,installation, testing and commissioning of intelligent
Addressable beam detector with with suitable reflector as per
standard specification and necessary accessories etc., complete
H PUBLIC ADDRESS SYSTEM - - -
1 PANEL WITH VOICE EVACUATION - GROUND LVL - - -
NS 1 Supplying, installing, testing and commissioning of 8 zone IP
based, digital Voice Alarm controller expandable upto 128 zones.
The voice alarm controller should be able to connect directly over
Ethernet. It should have functions like the audio playing, zone
control, fault monitoring, log recording, volume control and
amplifier switchover. The Voice alarm controller should also have Nos 1.00 289,100.00 289,100.00
the following functions:
. 255 Priorities
. Time schedule broadcasts
. Capable of amplifier redundancy
. 8 trigger inputs/outputs
NS 2 Supplying, installing, testing and commissioning of IP based
supervision of system status, setting of scheduled broadcasts with
the following functions:
. Built-in monitoring loudspeaker
. Detachable goose-neck microphone
. LCD touchscreen display
. Audio input
NS 3 Supplying, installing, testing and commissioning of 1X500W Class-
D Amplifier with 1 independent channel and can provide automatic
re-settable overcurrent, overload, overheating, overvoltage, under- Nos 1.00 59,000.00 59,000.00
voltage and DC protection '300W
NS 4 Supply, installation, testing & commissioning of Suitable size, 19-
inch Rack with standardized frame or enclosure for mounting
multiple PA controllers, CD player, FM sources, Amplifiers etc
modules, shall have Lockable doors, with proper ventilated and Nos 1.00 61,950.00 61,950.00
open able doors from all sides, with casters and with cooling fans
as above complete with necessary mounting hardware &
accesories.
NS 5 Supplying, installing, testing and commissioning of back ground
music player MP3 player,SD card reader,USB input,AM/FM Tuner
including accossories integrated with PA system complete.
NS 6 Supplying, installing, testing and commissioning 6W Ceiling
Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-
20KHz with a dispersion angle of 160 deg. The speaker should
have tappings at 6W/3W/1.5W
NS 7 Supply, installation, testing & commissioning of 2-Core 1.5 sq.mm ,
48/0.2mm (15 AWG). multi-stranded unshielded Insulated Straight
FRLS armoured Cable for Speakers, green in Colour with necessary
accessories.
NS 8 Supply, installation, testing & commissioning of Shielded CAT 5 or
CAT 6 Cable for Call Stations with necessary accessories. Rmt 10.00 64.90 649.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
NAME OF THE PROJECT - CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE
GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITY
S.N Item
Description of Item Unit Quantity Rate Amount
9 Supplying, installing, testing and commissioning approved make
PVC (FRLS) conduits on ceiling / wall / floor etc. complete with
accessories like, Junction boxes, Collars, Bends etc.
NS 25 mm dia. Rmt 80.00 76.70 6,136.00
SUB TOTAL (FIRE FIGHTING SYSTEM) 9601662.981
RO PLANT -
245 NS Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet :
25mm ; Type : Monoblock 1hp
PRESSURE SAND FILTER:
Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of
Construction : FRP
Inlet / Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm
Media : Pebbles & Sylex and Sand.
ACTIVATED CARBON FILTER:
Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of
Construction : FRP
Inlet / Outlet Connection : 25 mm; Multi port Valve Size : 25 mm ;
Media : Cocount Shell Activated Carbon & Pebbles.
MICRON FILTER:
Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ;
Inlet / Outlet Connection : ¾” mm ; Number of Cartridges : 2 Nos.
of 20” Long ; Number of Housing : 2 Nos. ; Working Pressure : 2
to 3 Kg / Sq. cm ; Filter Elements : 5Wound PP.
RO PLANT FRAME:
Skid : Stainless Steel (SS 202 Grade) ; Thickness of square pipe : 1
inch ; Thickness of sheet : 1.2 mm ; Method of cutting : Laser.
Membrane: ; Material of Construction : Thin Film Composite ; Make
: ( FILMTEC/Brackish/Hydranatics ) ; No. of Membranes : 2 Nos.
Dimension
SUB TOTAL : 40”
(ROx PLANT)
PASSANGER LIFT 8 PAX
246 Passenger Lift : Supply,Installation,Testing and ; Commissioning of
Electric Traction ; Passenger Lift of Makes : As per list ; of
recommended brands. ; with; Rated capacity :- 8
Passenger/544Kg ; Floors :- G+1 floor (2Stops/2 Landings) ;
Travel :- 3 to 4.2 mtrs ; Location of Lift Machine:- MRL Rated
speed :- 1.0mps VS ; Doors type :- COPO/TOPO Doors with frame
having clear opening of 800 mm wide x 2000 mm high made from
SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all
landing doors with SS door architraves/frames Lift car enclosure
made from SS 304 grade sheet of 1.5mm, thick with hairline finish
with frame made from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron, with necessary
false ceiling with adequate LED lights blower/fan for ventilation &
SS chequered plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons with Braille
Code & luminous indicator around button with FPI, scrolling UP/DN
LED indicator & with/without attendant key switch, OWD with
audio-visual alarm, VAS in Telugu & English with intercom system
with telephone instrument in Lift car, LMR & FCC/ground floor
Clear Car size of ......mm wide x ......mm deep x ......mm high
recess/surface push button box for all landings with scrolling
UP/DN LED indicator having metallic push buttons with Braille
Code & luminous
SUB TOTAL indicator around
(PASSANGER LIFT button
8 PAX)with CPI , Lift car arrival 3445600.00
AIR VENTILATION ARRANGEMENT -
247 NS Variable pitch axial fan high temperature:TA-HT-900-297-6-6-
33(250 @ 2 Hrs),Volume(Specified/Proposed):15,000(15,383)
cfm,Pressure (Specified/Proposed):15.0(15.8) mmwg,Speed Nos 1.00 89,769.33 89,769.33
(rpm):1440rpm,Motor Power (kW):4KW
248 NS Variable pitch axial fan high temperature:TA-HT-900-297-6-6-
40(250 @ 2 Hrs),Volume(Specified/Proposed):15,000(15,020)
cfm,Pressure (Specified/Proposed):15.0(15.8) mmwg,Speed Nos 1.00 84,565.50 84,565.50
(rpm):1440rpm,Motor Power (kW):4KW
249 NS Axial Jet Fan:CC JD 302/4
HT,Volume(Specified/Proposed):1356(2712) cfm,Pressure
(Specified/Proposed):0pa ,Speed (rpm):1440/2800rpm,Motor
Power (kW):0.25/1.1KW
SUB TOTAL (AIR VENTILATION ARRANGEMENT) 516534.83
Total Amount 137,356,369.15
Total Amount 137,356,369.15
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.10.01 18:36:38
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
SCC.pdf
Tender Document
GCC Contracting 2019.pdf
Tender Document
Integrity Pact.pdf
Tender Document
List of Approved Makes.pdf
Tender Document
Tender Drawing.pdf
Tender Document
Technical Specification.pdf
Tender Document
Tender BOQ.pdf
Tender Document
corrigendum-1095-Corrigendum 04.pdf
pdf • 0.06 MB
corrigendum-1076-Corrigendum 03.pdf
pdf • 0.39 MB
corrigendum-1065-Corrigendum 02.pdf
pdf • 0.06 MB
corrigendum-1046-Corrigendum 01.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .