Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC | ₹1.1 L | L1 | Accepted-AOC l1 |
| 2 | l2₹1.3 L+₹16,417 (14.4%)Rejected-Finance | ₹1.3 L+₹16,417 (14.4%) | l2 | Rejected-Finance l2 |
| Sl No | Description | Qty | Unit | FELIX JOSEPH L1 | BABY P P L2 |
|---|---|---|---|---|---|
| 1.00DRINKING WATER PROJECT | |||||
| 1.00 | OD461946/2025-2026:DOWEL BARS - Supplying and providing MS dowel bars of size 16mm dia of 1.20m
long (60cm
in rock and 60cm in concrete ) including drilling holes of 16mm dia to a depth of
60cm in rock
and filling the gap with cement grout( 0.10kg/each) etc complete. | 16 | each | 267.33 ₹4,277.28 Lowest | 280 ₹4,480 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.51 | cum | 9,235.97 ₹4,728.82 Lowest | 9,600 ₹4,915.2 |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 1.28 | sqm | 386.16 ₹494.28 Lowest | 400 ₹512 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 70 | kilogram | 116.69 ₹8,168.3 Lowest | 200 ₹14,000 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 340 | kg | 194.27 ₹66,051.8 Lowest | 200 ₹68,000 |
| 1.01 | OD435028/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | 9 | sqm | 621.1 ₹5,589.9 Lowest | 680 ₹6,120 |
| 1.01 | 50.18.8.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | 1 | metre | 499.91 ₹499.91 Lowest | 500 ₹500 |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 2,000 | Litre | 12.15 ₹24,300 Lowest | 16 ₹32,000 |
Tender Value
₹1.1 L
EMD Value
₹2,853
Closing Date
24 Feb 2026, 5:00 pmClosed
ae
ae office kavalangad gp
373/25-26/PATHADIPPALAM DRINKING WATER PROJECT IN WARD-9- IN KAVALANGAD PANCHAYAT
2026_LSGD_836839_1
96/25-26/AE/KVGP
Open Tender
Civil Works - Others
Item Rate
180 days
kavalangad
Please refer Tender documents.
7 documents required · 7 mandatory
₹655
Yes
₹2,853
Yes
1 Sept 2026
16 Feb 2026
26 Feb 2026
16 Feb 2026
24 Feb 2026
16 Feb 2026
16 Feb 2026 - 24 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DRINKING WATER PROJECT | |||||
| 1.001 | OD461946/2025-2026:DOWEL BARS - Supplying and providing MS dowel bars of size 16mm dia of 1.20m
long (60cm
in rock and 60cm in concrete ) including drilling holes of 16mm dia to a depth of
60cm in rock
and filling the gap with cement grout( 0.10kg/each) etc complete. | - | each | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | - | sqm | - | - |
| 1.004 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kilogram | - | - |
| 1.005 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.006 | OD435028/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | - | sqm | - | - |
| 1.007 | 50.18.8.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | - | metre | - | - |
| 1.008 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | - | Litre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1408934.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1408934.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 1.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .