. Innovation of Anjeenikkulam - Second Phase -(Project No - 859 ) General Work

Amount

Innovation of Anjeenikkulam - Second Phase

23.1.1.1 - Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level. All types of soil300 mm dia

23.13.1 - Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:100 mm dia

23.3.1 - Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.100 mm nominal size dia

23.8 - Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine /medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in- charge.

OD175059/2025-2026 - Graffiti wall drawing with multi colour with Artist wall theme drawing using Deluxe Multi surface paint system for interiors and exteriors

OD175263/2025-2026 - Providing and laying Heavy duty vitrified floor tiles (slip shield for wet area) in s (20mm thickness) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.

11.41.2 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD176282/2025-2026 - Providing and laying PICCOLO Porcen Mosaic Tiles for swimming pool, 6 mm thick tiles of in all colours and shade, laid with using MAPEI water proof Adhesive & MAPAEI cementation grout in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500 x 500 mm.

60.2.4 - BAILING OUT WATER USING PUMP ABOVE 10HP AND UP TO 20HP - Bailing out water with engine and pump set above 10HP and up to 20HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

11.48.2 - Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

8.2.2.2 - Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

2.6.1 - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

60.7.1 - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1-Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

51.2.3-Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

16.78.1-Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

OD180654/2025-2026-Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

OD180655/2025-2026-Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.100 mm thick C.C. paver block of M-30 grade with approved color design and pattern. REF :16.91.2

16.69-Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

4.1.6-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

OD176285/2025-2026-Providing and laying Heavy duty vitrified floor tiles (slip shield for wet area) in s (20mm thickness) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 900 x 600 mm.

OD180368/2025-2026-Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 900x600mm

11.20.1-Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement

11.26.1-Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick

OD179733/2025-2026-Supplying and fixing stone garden sitting bench with 1.5 meter length, 450mm clear height from ground level, 450mm wide seating, 450mm wide backrest as per approved by engineer in charge

30.2.2-Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3-Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.4.1-Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.4.2-Screened through sieve of I.S. designation 16 mm Details of cost for one cum

30.2.4.3-Screened through sieve of I.S. designation 4.75 mm

30.2.5-Rough dressing the trenched ground including breaking clods.

30.2.6-Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

30.2.7-Fine dressing of the ground

30.2.8-Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.9-Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

2.8.1-Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

10.19-Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

4.1.3-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

10.1-Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.10.1-Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2-Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.48.3-Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

OD179754/2025-2026-Providing and fixing onduvilla Roofing sheet of 1070 x 400mm in 3mm thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) fixing with onduline screw (6 screw on each sheet)including overlapping of each sheet (20% area for each sheet overlaping)

OD180656/2025-2026-25.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

12.52.1-Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

5.1.2-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.6-Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.5-Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3-Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

6.38-Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade- I AAC blocks of density 551 to 650 Kg/ cum conforming to IS: 2185 (Parts-3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

13.1.1-12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1-Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1-Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

8.31-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

8.31-Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41A.2.2-Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm

9.147C.1-Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

9.147D.1-Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

51.19.ST4-Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br> 4. 35 to 50 flush capacity

19.32.1-Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

50.18.7.4.1-Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.8.2.2-Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

50.18.8.6.2-Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.8.9.1-Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.2.1-Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints as per direction of Engineer in Charge.20 mm dia 12 Kgf/cm2

50.18.9.3.1-Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 25 mm dia 12Kfg/cm2

50.18.9.6.2-Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

50.18.9.9.1-Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

17.1.1-Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

17.4.3-Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern

9.108.1-Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete.152x42x18 mm weighing not less than 60 gms

9.113-Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge.

50.17.1.5-Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.7.1-Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

18.48-Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

17.73.1-Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gms

18.22.2-Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter

18.65-Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.

17.32.4-Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

OD189955/2025-2026-Supplying and fixing border plants

OD189974/2025-2026-Supplying and fixing of Eugenia Plant

Supplying and Fixing Open Gym Equipments

OD190354/2025-2026 - Supplying and Fixing Abb Trainer (LFO-FN-01) - 30x 112x 63cm

OD190460/2025-2026 - Supplying and Single Cross Trainer (LFO-FN-17) - L-4.43x W 1.83x 4.8 Ft.

OD190461/2025-2026 - Supplying and Double Horse Rider (LFO-FN-15) - L-5.66x W 5x 4 Ft.

OD190466/2025-2026 - Supplying and Fixing Pushup Bar (LFO-FN-23) - L-180x W 55x 160 cm.

OD190467/2025-2026 - Supplying and Fixing Horizontal Bar (LFO-FN-22) - L-120x W 120x 130 cm.

OD190468/2025-2026 - Supplying and Fixing Surfing Board (LFO-FN-20) - L-120x W 80x 144 cm.

OD190469/2025-2026 - Supplying and Fixing Surf Board (LFO-FN-20) - L-120x W 91x 145 cm.

OD190470/2025-2026 - Supplying and Fixing Back Press (LFO-FN-19) - L-135x W 80x 142 cm.

OD190471/2025-2026 - Supplying and Double Cross Trainer (LFO-FN-18) - L-5x W 4x 4.83 Ft.

OD190462/2025-2026 - Supplying and Horse Rider (LFO-FN-15) - L-4x W 2x 4 Ft.

OD190463/2025-2026 - Supplying and Walking Barrel (LFO-FN-14) - L-3x W 1.66x 5 Ft.

OD190464/2025-2026 - Supplying and Fixing Spinner (LFO-FN-13A) - L-160x W 75x 220 cm.

OD190465/2025-2026 - Supplying and Fixing TaiChi Spinner (LFO-FN-13) - L-3.66x W 3.36x 5.00 Ft.

OD190429/2025-2026 - Supplying and Fixing Twister Standing (LFO-FN-06) - L-4.56x W 4.56x 4.36 Ft.

OD190430/2025-2026 - Supplying and Fixing Shoulder Press (LFO-FN-05) - L-6.8x W 2.86x 6.50 Ft.

OD190431/2025-2026 - Supplying and Fixing Verticle Shoulder Pull (LFO-FN-04A) - L-80x W 60x 250 cm.

OD190432/2025-2026 - Supplying and Fixing Chest Press (LFO-FN-03) - L-5.8x W 2.43x 7.5 Ft.

OD190433/2025-2026 - Supplying and Fixing Leg Press Double (LFO-FN-02) - L-4.6x W 1.30x 5.5 Ft.

OD190454/2025-2026 - Supplying and Fixing Double Walking Machine (LFO-FN-12) - L-7.26x W 1.76x 4.56 Ft.

OD190455/2025-2026 - Supplying and Fixing Walking Machine (LFO-FN-11) - L-3.66x W 1.53x 4.93 Ft.

OD190456/2025-2026 - Supplying and Fixing Double Running Machine (LFO-FN-10) - L-3.66x W 1.53x 4.93 Ft.

OD190457/2025-2026 - Supplying and Fixing Single Running Machine (LFO-FN-09) - L-3.3x W 1.83x 4.8 Ft.

OD190458/2025-2026 - Supplying and Fixing Single Rowing Machine (LFO-FN-08) - L-2.83x W 2.03x 4.03 Ft.

OD190459/2025-2026 - Supplying and Fixing Sky Walker (LFO-FN-07) - L-5.26x W 1.83x 4.83 Ft.

Kids Play Area Equipments

OD190473/2025-2026 - Supplying and fixing Two Seater Seesaw

OD190474/2025-2026 - Supplying and fixing Circular Swing , Size equipment L-7 x W-5.5 x H-7 Ft.

OD190475/2025-2026 - Supplying and fixing Seating MGR , Size equipment 5 Ft Dia, Safe play 6.5Ft. Dia

OD190476/2025-2026 - Supplying and fixing Jumbo Play Station (Equipment size :- L-32 x W-17 x H-13 Ft., Safe Play Area = L-35 x W - 16 Ft.

Kids pool Filtration setups

OD191134/2025-2026 - Filtration Equipment - TOTALLY ANTI-CORROSIVE Injection Moulded sand filter, 620 MM diameter. Fitted with pressure gauge panel, manual air bleeder, water drain and emptying plug. Fitted with collector arms and diffuser made from unplasticized PVC and polypropelene. (with frilter media) Flow Rate : 14 m3/hr Filtration Velocity : 50 m3/hr/m2 Working Pressure : 2.5 kg/cm². Filter Diameter Not Less than 700 mm Filter Inlet & Outlet : 50 mm Make : Aqua Italy

OD191135/2025-2026 - Re-circulating Pumps - Plastic body Pumps 2900 r.p.m. Mechanical Seal I.P.-55 motor protection. Stainless steel AISI-316 shaft. With strainer basket. 1 HP motor Flowrate : 16 m3/h @ 10m.head. Make : Aqua Italy Model : PARMA100M

OD191136/2025-2026 - Inlets - Multi Directional return inlet Glue type. Max. Flow/ inlet = 5000l/hr Make : Aqua Italy Model: F201G

OD191137/2025-2026 - Pool Drains - Anti Vortex Drain Flow rate : 10m3 Make : Aqua Italy Model: F126

OD191139/2025-2026 - Skimmer - Standard Skimmer Make : Aqua Italy Model: F111

OD191140/2025-2026 - MAINTENANCE ACCESSORIES - Double length metal head in polished Al and chrome bronze 2" length 14" Make : Aqua Italy Model: C102

OD191141/2025-2026 - MAINTENANCE ACCESSORIES - Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops.2*2.4 mts. Make : Aqua Italy

OD191150/2025-2026 - MAINTENANCE ACCESSORIES - Model: C137 Transparent blue plastic vacuum hose 10 mtrs long including hose cuffs for connection to suction inlets. Make : Aqua Italy Model :C130

OD191151/2025-2026 - MAINTENANCE ACCESSORIES - Deep bag net made in polypropelene and white polyester netting, . Make : Aqua Italy Model : C145

OD191153/2025-2026 - MAINTENANCE ACCESSORIES - Curved brushes made in polypropelene for pool basins and scum liners. . Make : Aqua Italy Model: C120

OD191154/2025-2026 - MAINTENANCE ACCESSORIES - Test kit for free chlorine & pH Make : Aqua Italy Model: CL105

OD191163/2025-2026 - LADDERS - Stainless steel AISI-304 ladders with handrails & stainless steel non-slip steps, provided with anchoring fixtures. No. of treads - 2 (Picture is of 3 step ladder. We quoted 2 step only)

OD191165/2025-2026 - UNDER WATER LIGHT - Underwater Lights - ABS Under Water Light 12Volts 21 Watts - Warm White LED Lights Make : Aqua India. Model: E 108 WW-LUX

OD191166/2025-2026 - UNDER WATER LIGHT - Junction Box ( Deck Box ) with Security Cover for Under Water Lights Junction Boxes, made in ABS, composed of 3 entries Make : Aqua Italy. Model: E242

OD191167/2025-2026 - UNDER WATER LIGHT - Transformers Cascade transformer for lights Make : Aqua Italy Model: E245

OD191168/2025-2026 - ELECTRICAL & PLUMBING WORK - Internal & External Electrical Accessories Cables & conduits Make : Havells / Finolex / Eq

OD191169/2025-2026 - ELECTRICAL & PLUMBING WORK - Internal & External Plumbing Accessories Pvc pipes, fittings, supports & consumables Make : Supreme / Finolex / Eq

OD191170/2025-2026 - ELECTRICAL & PLUMBING WORK - PVS Valves 50 mm Ball Valve & NRV Make : Apaax

OD191171/2025-2026 - ELECTRICAL & PLUMBING WORK -Electrical Control Panel Starter for pump

OD191173/2025-2026 - MOBILISATION, INSTALLATION, TRANSPORTATION & COMMISSIONING Charges for Filtration Equipment , Re-circulating Pumps , Inlets, Pool Drains , Skimmer , MAINTENANCE ACCESSORIES , LADDERS , UNDER WATER LIGHT and ELECTRICAL & PLUMBING WORK

Electrification

1.10.3 - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.3 - Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.33 - Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

1.31 - Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.58 - Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD180312/2025-2026 - Supplying and fixing 200mm Plastic sill shade. as required

OD180314/2025-2026 - Supplying and fixing 9W LED Bulb. as required.

OD180313/2025-2026Supply, conveyance, installation, testing and commissioning of 10W/12W LED bulkhead fittings with IP66 protection directly on wall including cutting necessary - holes, giving connections with the extended original wiring, making good the damages, colour washing etc as required

90.3.21.3 - Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

OD180315/2025-2026 - Supply, Conveyance, installation, testing and commissioning of 1800 lumen round/square (1ft X1ft) surface/recess fitting made of die cast aluminum, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10% directly on ceiling and giving connections with 16/0.20mm 3 core PVC insulated and sheathed round copper conductor flexible wire or extending the original wiring and giving connections as required.(Chip make Cree/Osram/lumilled/Nichea) or equivalent make

90.4.5.4 - Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.25 - Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.47 - Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

69490 - Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

OD180316/2025-2026 - Supply, Conveyance, installation , testing and commissioning of 200/250 mm sweep light duty exhaust fans in plastic body in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan

69496 - Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD180336/2025-2026 - Supply, Conveyance, installation, testing and commissioning of 400 mm sweep wall mounting fan with metallic blades, blade covers,body,mounting brackets etc with Almonard,Orient,Havels or equivalent make

90.10.1.2 - Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface

90.10.1.3 - Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface

90.10.1.4 - Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )4 module moulded plastic box on surface

90.10.1.5 - Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )6 module moulded plastic box on surface

90.10.1.6 - Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )8 module moulded plastic box on surface

1.28.1 - Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 - Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.3 - Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module

1.28.4 - Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 - Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.24.1 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.15 Supply and Fixing the following modular switches & accessories in the existing - front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.23 - Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top

2.3.3 - Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

90.11.1.10 - Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.15 - Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

OD180337/2025-2026 - Supplying and fixing following rating, Double pole, Centre off MCB Change over in the existing MCB DB complete with connections, testing and commissioning etc. as required.25A/32A amps

2.12.1 - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 - Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 - Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.2 - Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.15.2 - Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.15.3 - Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.10.1 - Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.10.3 - Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.10.4 - Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

1.17.3 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.6 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm

1.17.12 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.15 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm

1.17.21 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.24 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm

1.21.1 - Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 - Supplying and fixing of following sizes of medium class PVC conduit along with - accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

90.12.7.42 - Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp

9.1.34 - Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

5.4 - Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD180342/2025-2026 - Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD180343/2025-2026 - Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD180341/2025-2026 - Supply and providing 25x6mm brass bolt

90.16.1.3 - Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3 - Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) -

OD180366/2025-2026 - Fabrication, supply, erecting, testing and commissioning of the following dust and vermin proof free floor/wall mounting panel boards confirming to IS and IE rules made out of 1.6 mm CRCA sheet or 16/18 SWG GP/GI sheet and necessary MS angles or flats duly powder coated with approved colours, hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets removable gland plates as per specifications and interconnected with suitable Al Bus bar consisting of panel mounting type switch gears with all rigid connections and control wirings – Metering Panel - (Bus bar Phase & Neutral - 25x6 mm Al. with heat shrinkable PVC sleeve colour coded and supported by epoxy supports, Earth – 25x3mm Cu Bus Bar and Al. jumpering included) consisting of 1. Incoming - provision for fixing and including supply of 63A 4 Pole SFU TP&N 2. Outgoing - Provision for fixing 4 numbers of single phase KWH Meter for KSEB connection (supply of each KSEB connection with 32A Cut out Fuse with 32A HRC link, 32A Neutral link and 32A DP MCB) and One three phase KWH meter (with supply of 63A SFU with three numbers of 63A Cut Out Fuse and Neutral Link).

90.14.5 - Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD180367/2025-2026 - Supply, Conveyance Installation testig and commissioning of 5kVA /72V Line Interactive UPS, Wave form=Pure Sinewave, single phase, Input voltage range (normal mode)= 150-260vac, Voltage range (UPS mode) =195-260vac , Output frequency=50Hz +/- 0.5Hz , Output put voltage: 220V +/- 5% , Regulation On Mains : Automatic Voltage Regulator(AVR), Transfer Time:3-7 ms, DSP and dual microprocessor controlled system With LED indication for checking performance of inverter battery system , Protections:EMI RFI Spike &Surge Protection, Indications- mains on, inverter on, battery low, over load, trip, common alarm Certificates- BIS, ISO 4001, ROHS, OHSAS,CE. Warranty: 3 year

90.15.2.3 - Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

90.15.4.7 - Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD184255/2025-2026 - Supplying and fixing 24Hr Analog Timer switch with NO/NC operating voltage 230V in the existing MCB DB complete with connections, testing and commissioning etc. as required.

OD184256/2025-2026 - Supplying and fixing 240/415 volts, 30A AC1/12A AC3 Power contactor 3Pole with 240V operating voltage in the existing MCB DB complete with connections, testing and commissioning etc. as required.

OD184314/2025-2026 - Supplying and fixing following rating, four pole, Centre off MCB Change over in the existing MCB DB complete with connections, testing and commissioning etc. as required.32 amps

OD184315/2025-2026 - Supplying and fixing 4P sheet steel enclosure on surface/ recess suitable for fixing 4P MCB, RCCB, Isolator etc including 40A 4P Isolator. as required.

OD184466/2025-2026 - Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5 Sqmm single run

OD184467/2025-2026 - Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 4.00Sqmm single run -

90.6.5.11 - Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.12.5.40 - Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.12.7.40 - Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

9.1.32 - Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

OD185292/2025-2026 - Supplying and fixing distribution box of Vermin proof, for outdoor installation (with knockouts for cable entry - Black/White colour ) of size 400mm x 300mm x 190 mm/ Nearest size with necessary connector and din rail including giving connection (Sintex Model No. GSJB4030)/ Equivalent make.)

OD185290/2025-2026 - Supplying and fixing Cable Junction Boxes of Vermin proof, for outdoor installation (with knockouts for cable entry - Black/White colour ) of size 140mm x 140mm x 95 mm/ Nearest size with necessary connector including giving connection (Sintex Model No. GSJB1414)/ Equivalent make.)

OD185291/2025-2026 - Supplying and fixing Cable Junction Boxes of Vermin proof, for outdoor installation (with knockouts for cable entry - Black/White colour ) of size 250mm x 200mm x 105 mm/ Nearest size with necessary connector and din rail including giving connection (Sintex Model No. GSJB2520)/ Equivalent make.)

OD185304/2025-2026 - Supply, Fixing, Installation, Testing and Commissioning of 40W LED post top lantern made in die-cast aluminium with innovative glare free indirect lighting distribution and IP 54 protection suitable for the lighting of open place and giving connections etc : as required including painted base plate with suitable size pipe (3mtr GI Pipe) and 4Nos anchor bolt for fixing the fitting on existing bridge concrete pillar. (Luker LPL440N/Havells/Philips make or equivalent)

OD186962/2025-2026 - Supply, conveyance, installation, testing and commissioning of outdoor garden type single fancy/ Spot light fittings of all types with 9W/12W LED directly on wall/ ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required.

90.12.10.2 - Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.5 - Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size

90.12.9.2 - Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.9.5 - Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench90/75 mm or nearest size

90.12.39.1 - Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 4 sq mm

90.12.39.5 - Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ - HUME / STONE WARE/ GI/ DWC pipe as required.3 core 4 sq mm

90.12.41.1 - Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 4 sq mm with factory made clamp

90.12.41.5 - Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp

9.1.1 - Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

OD187158/2025-2026 - Supply, Conveyance, Installation, Testing, and commissioning of 1 Phase, 3 HP, 240 V, 50Hz, 20-stage Vertical Bore Well submersible pumpset, confirming to IS, capable of discharging a total head of 75-157 mtr, with corresponding discharge, with outlet 32mm/40mm size as per IS specification as required.[ Deccan Ekki /Aquatex/KSB/Kirloskar/CRI]

OD187157/2025-2026 - Supply, Conveyance, Installation, Testing, and commissioning DOL motor Controller, Suitable for a 3 HP submersible motor pump set with a dry run preventor, and giving necessary connections, etc, as required

OD187156/2025-2026 - Supply and fixing 32mm/40mm dia UPVC Coloume pipe including fixing the pipe accessories etc as required

90.6.6.3 - Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

OD187151/2025-2026 - Supply and laying of 20mm or nearest size Nylon rope

OD187152/2025-2026 - Supply and fixing 32 mm/nearest size Brass NRV including all labour charges

OD187153/2025-2026 - Supply and providing Borewell patta clamp of suitable sizeof suitable size

OD187154/2025-2026 - Supply and providing Steel Connector of 32mm/Nearest Size

OD187155/2025-2026 - Supply and Providing stainless steel hook adapter set

OD187184/2025-2026 - Supply and providing 32mm/Nearest Size GI Bend, Union and GI Socket.

OD188759/2025-2026 - Supplying and drawn of UTP appropriate pairs of CAT 6 LAN cable in the surface/recessed steel/PVC conduit as required for the CCTV installation.

OD188786/2025-2026 - Supply, installation, testing, and commissioning of 10 CCTV cameras along with all necessary accessories, which includes: a) CP Plus 16-Channel NVR b) CP Plus 4 MP Color Cameras (10 Nos.) c) 16-Port PoE Full Gigabit Switch d) 8 TB Hard Disk Drive e) Outdoor PVC Camera Junction Boxes (COBOX) f) 6U Network Rack g) RJ45 Connectors and all other required materials and accessories for a complete and functional CCTV system.

OD188788/2025-2026 - Supply, installation, testing, and commissioning of a 32-inch TV, including TV wall mount accessories and all necessary materials required for proper installation and operation.

90.6.5.3 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.00 sq mm

OD188795/2025-2026 - Supply, installation, testing, and commissioning of 8 outdoor garden speakers, along with all necessary accessories, which include: a) 300W Amplifier with USB and Bluetooth connectivity b) Ahuja 30W Outdoor Speakers (8 Nos.) c) Ahuja ACM- 96CH Microphone ...and all other materials required for a complete and functional outdoor sound system.

OD180378/2025-2026 - Charges for preparation of KSEB test Report for submitting to the concerned KSEB section office

MUNEER P P (BID ID -2384361)

AKBAR MANCHERRY (BID ID -2384352)