Design, Supply, Installation, Testing and Commissioning of 20 No.(G plus 3) 5passengers (340 Kg), lifts along with allied works at Transit Accommodation at Fatehpora Baramulla.

Supply, installation, testing & commissioning of 3- phase 10 KVA servo-stabilizer of reputed make with working range of 150-460 Volts AC Phase-Phase including all allied electrical accessories. The stabilizer should have following specifications: Capacity: 10 KVA, 3-phase unbalanced type Input: 100-265V AC P2N; (150-460) V AC P-P Output: 415 V ± 1% - phase to phase Supply: 3 phase, 4 wires, 50Hz Operation: Automatic Duty cycle: continuous Transformer windings: Copper wound on CRGO laminations as per IS specifications. Cooling: Oil cooled (First oil filling provided) Efficiency: Better than 98% at full load Waveform distortions: Nil Overload Capacity: 15% for continuous 4 hours. High speed voltage correction: up to 8V to 20V per second Protections: Under voltage, Over voltage, Overload and short circuit protection. Other features: LED indicators, AC ammeter, AC voltmeter, Frequency meters, Single phase preventer, and Stabilizer by-pass arrangement. The job also includes P/F of 63A 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC Enclosure as per relevent IS Codes.

Providing and Laying of proper chemical earthing (Twin) of all Electro-mechanical components carrying main current, including but not limited to the motor and electric panel complete job as per IS 3043 (1987)

Providing / fitting of 100 amp Change Over Panel comprising copper Bus bar, incoming MCCB outgoing MCCB and on load changeover switch for DG and main supply in a CRC Panel duly powder coated.

Providing and laying of 4 core, 10 sqmm armoured Copper XLPE insulated cable along with thimbles for connecting Power Source, MCCB, Servo Stabilizer to the changeover panel and to the main panel of lift.

Providing / Fitting of 3.5 core, 35 sq mm armoured Al. XLPE insulated cable for connecting power source to Servo stabilizer to 3-phase 4 pole Change Over panel duly thimbled & laid P/c capping upto Change over panel in the tool along with conduits / cable trays & clamps wherever required conforming to IS: 1554

Cost on account of CAMC for 1st year after DLP @5% of Item No1.1 of BOQ

Cost on account of CAMC for 2nd year after DLP @6% above item no 2 of BOQ