ESSENTIAL REPAIR TO B/R NATURE OF WORKS AT HQ DGBR COMPLEX SEEMA SADAK BHAWAN RING ROAD DELHI CANTT IN THE AREA OF 1353 GE 21 BRTF UNDER PROJECT SHIVALIK IN NEW DELHI

Amount

Attending day to day upkeeping under ground sewage complaints of all nature for rectification i.e. blockage of WHB, bottle trap, urinal, sink, floor trap Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description ,sewer/rain water line, manholes in any situation of building for cleaning manually using bamboo or other eqpt /mechanically and removing blockage from entire system and making it fully functional in the area of office compex at HQ DGBR complete all as specified and as directed. Note :- (i) The complains shall be attended & defects shall be rectified within same day i.e from 0830 hrs to 1730 hrs excluding sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.1267/-Per day (08 hrs) shall be leived upon/imposed on the contractor and necessary recovery shall be made from his dues on this account. (ii) Contractor shall arrange suitable T&P (such as KHAPACHI, GI wire, PHADWADA, Bucket, Spikes,rope etc) incl necessary form work/scaffolding and safety measure complete all as specified and directed. (iii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e Jet pressure/trolley/truck mounted sewer cleaning machine as and when required (Minimum once in 03x months) for cleaning entire sewage system and free of any sludge/ blockage. (iv) Contractor or his rep will report daily at complaint cell for collection of complaints from the concerned JE's Incharge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Egr in charge by the contractor/ his rep immediately. If Engr in charge is satisfied with contractor's view, no recovery will be made on this account. However such complaints shall be attended on very next day whether it is 'Sunday' or 'Gazetted Holidays' and nothing extra shall be payalbe to contractor on this account.

Attending day to day upkeeping under ground sewage complaints of all nature for rectification i.e. blockage of WHB, bottle trap, urinal, sink, floor trap Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description ,sewer/rain water line, manholes in any situation of building for cleaning manually using bamboo or other eqpt /mechanically and removing blockage from entire system and making it fully functional in the area of OTM complex complete all as specified and as directed. Note :- (i) The complains shall be attended & defects shall be rectified within same day i.e from 0830 hrs to 1730 hrs excluding sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.1267/-Per day (08 hrs) shall be leived upon/imposed on the contractor and necessary recovery shall be made from his dues on this account. (ii) Contractor shall arrange suitable T&P (such as KHAPACHI, GI wire, PHADWADA, Bucket, Spikes,rope etc) incl necessary form work/scaffolding and safety measure complete all as specified and directed. (iii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e Jet pressure/trolley/truck mounted sewer cleaning machine as and when required (Minimum once in 03x months) for cleaning entire sewage system and free of any sludge/ blockage. (iv) Contractor or his rep will report daily at complaint cell for collection of complaints from the concerned JE's Incharge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Egr in charge by the contractor/ his rep immediately. If Engr in charge is satisfied with contractor's view, no recovery will be made on this account. However such complaints shall be attended on very next day whether it is 'Sunday' or 'Gazetted Holidays' and nothing extra shall be payalbe to contractor on this account.

Checking and attending to welding work in repairs to steel windows, handles, door springs, iron frame of doors, rolling shutter garrages and other iron misc works ,repair by welding(run or spot welding as per site requirement) by providing one welder and one helper alongwith welding machine gloves welding glass, welding rod etc. Note :- The cost of welding rod shall be included in this unit rate.

S & F in repair cast aluminium body door closer hydraulically regulated designation No-3,universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgs complete all as specified and directed. Make:- Godrej/Ozone.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified.

S & F in repair 6mm thick Veneered decorative ply wood,grade I (with BWR resin) decorative veneers on one side faces, fixed with screws to timber frame work or angle iron chowkhat complete all as specified and directed. Make:- Action/Century

S & F 5mm thick frosted glass including hacking out old broken glass, Complete all as specified and directed. Make:- Modi Guard/Saint Govind

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified. Make : Ozone/Dorma/Nexia and equivalent.

S & F in repair framed work such as grills,gratings etc with ends of bars shouldered and/or riveted or forged into spikes,framed guard bars,barred iron doors, angle iron chowkhats, AC stand/chajja, ladders,framed balusters,walk ways,railings,framework of water tanks, and similar work conforming to Fe-410-0 including dismantling old wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Vitrified tiles (dark shade) 9 mm to 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/Skirting etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or backing coat incl dismantling of old exisitng tiles or flooring of any description including removal rubbish beyond MoD land, all as specified. Make:- Somany/Johnson Johnson/Kajariya

M & L for non skid coloured rectified tiles 7 to 8mm thick double charged/Nano Tech floor tiles(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or bedding layer incl dismantling of old existing tiles or flooring of any description including removal rubbish beyond MoD land, all as specifiedall complete all as specified and directed.Make:- Somany/Johnson Johnson/Kajariya

M & L for non skid coloured rectified tiles 7 to 8mm thick double charged/Nano Tech floor tiles(square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or bedding layer incl dismantling of old existing tiles or flooring of any description including removal rubbish beyond MoD land, all as specifiedall complete all as specified and directed. Make:- Somany/Johnson Johnson/Kajariya

M&L 18-20mm thick black grenite of size in single pieces with full width of wall (tabled rubbed, polished and moulded) as in colms, steps, window cills and like laid over 15mm screed bed or plastering in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite including dismantling of stone slab including removal rubbish beyond MoD land, complete all as specified and directed by the Engr-in-Charge.

M & L for glazed rectified/Digital/nano tech coloured tiles in vertical surface size 300mm x 600mmx7 mm thick or 450mm x 600mmx7 mm thick (As approved by user) set and jointed in neat cement slurry and pointed in coloured cement grout to match including rendering 10mm thick in CM (1:3) as in backing coat incl dismantling of old existing tiles incl bedding finish including removal rubbish beyond MoD land complete all as specified and directed. Make:- Somany/Johnson Johnson/Kajariya

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work including removal rubbish beyond MoD land, complete all as specified and direced.

M&L for brick work with sub class `B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks complete all as specified and directed.

Material and labour for brick work using sub class B bricks (old size) straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water etc including removal rubbish beyond MoD land, complete all as specified.

M&L for 15mm thick rendering on brick work in cement mortar 1:4 using water proofing compound as per manufacturer's instructions incl finishing the surface even and fair complete all as specified and directed. Note: WPC shall be measured & paid for seperately.

M&L for 15 mm thick rendering in CM ( 1:6 ) on fair faces of brick work or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation old/new surface of plastered surfaces or more as required at site applying 1mm thick white POP wall care putty of approved make, finishing the surface smooth using sand papers etc complete all as specified and directed. Make:- J K/Birla

M&L for applying of old surface two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistance primer on walls on prepared surfaces under items here-in-before complete all as specified and directed. Make:-Bergar/Asian

All as per item No. 25 here-in-before but on ceiling surfaces.

M&L for preparation of old treated surfaces of wall & applying one coat of oil bound distemper (approved quality & tint) using painting rollers complete all as specified and directed.Make:-Bergar/Asian

All as per item No. 27 here-in-before but on ceiling surfaces.

M&L applying two coats of plastic emulsion paint (approved quality & tint) over a coat of alkali resistant primer using painting rollers on prepared surfaces under items above complete all as specified and directed.Make:-Bergar/Asian

All as per Item No. 29 here-in-before but in ceiling.

M&L for preparation of old treated surfaces of wall and applying one coat of cement base paint complete all as specified and directed Make:-Bergar/Asian

M&L for preparation of new/old plastered surfaces of wall and applying two coats 1st quality weather proof exterior acrylic emulsion paint using painting rollers over a coat of alkali resistance primer complete all as specified and directed.Make:-Bergar/Asian

M&L for preparation of old treated surfaces of wall and applying one coat of 1st quality weather proof of exterior acrylic emulsion complete all as specified and directed.

M&L preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. Make:-Bergar/Asian

Taking down wooden/steel chowkhats/windows/door frame including shutter (without taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to or from store complete all as spd & directed.

S&F powder coated aluminium frame for doors, windows, ventilators or framing of workstation, alum partition etc with one or more rebates, section weight not less than 0.55 Kg/RM including joining cleat for fixing etc. complete all as specified.Make:- Jindal/Hindalco

S & F Anodised aluminium door shutters/partition/office cabin, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including 5.5mm thick (plan/tinted/antelio) glass/ including all fittings etc. complete all as specified and directed.Make:- Jindal/Hindalco

S&F aluminium powder coated window comprising of sliding runner of Three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of two/three/one fixed as required/approved sliding shutters made out of section (weight not less than 0.55 Kg/RM) with 5mm thick antelio glass fixed with rubber and aluminium beading including down push type locking arrangement in glass shutter, fixed the frame with rawl plug complete all as specified and directed. Make:- Jindal/Hindalco Note : Rate for glass and wire mesh jalli (as approved) included in item rate.

S & F 8 mm thick frosted glass , toughned, fixed as partition in between urinals and similar works fixed to wall/floor with suitable stainless steel angle/cleats or fastners, and the edges of the glass should be properly moulded/grinded complete all as specified and directed.Make:-Modi Guard/Saind Govind

Excavation in trenches in hard/dense soil not exceeding 1.5 m wide and n.exc 1.5 m in depth and getting out for laying pipes/constn of man holes including trimming sides and forming bottom surface to reqd level, slopes, gradient etc complete all as specified and directed.

All as per item No. 42 here-in-before but depth exc 1.5m and not exc 3.00m

Returning/filling in trenches in soft/loose soil including spreading watering, well ramming in layers n.exc 25 cm thick after laying and testing of pipe complete all as specified and directed.

Removing excavated material/surplus soil to a distance n.exc 150m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for reinforcement cement concrete drain pipes , bore of pipes-300 mm, class NP-2 laid and jointed complete with collars complete all as specified and directed.

M & L for reinforcement cement concrete drain pipes , bore of pipes-150 mm, class NP-2 laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:4:8 Type D-2 (using 40mm graded stone agg) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300 mm dia complete all as specified.

M&L for PCC 1:4:8 Type D-2 (using 40mm graded stone agg) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia complete all as specified and directed.

M&L for PCC 1:3:6 Type C-1 (using 20mm graded stone agg) as in benching,bed plates, etc of manhole and in flooring complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone agg) for bed Cement concrete in surface channels and drains complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping and flooring etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 100mm complete all as spd & directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 75mm complete all as spd & directed. Note :-Height of bldg Up to 5 Story the required scafolding for bldg rate are including in this Item.

S&F 100mm bore CI sand cast soil, waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls all as directed. Note :-Height of bldg Up to 5 Story the required scafolding for bldg rate are including in this Item.

All as per item No. 56 here-in-before but 75mm bore of pipe.

S&F 100mm bore sand cast iron bends (any radius) diminishing pieces or tapers (larger bore to be measured) with oval access doors complete all as spd and directed. Note :-Height of bldg Up to 5 Story the required scafolding for bldg rate are including in this Item.

All as per item No. 58 here-in-before but 75mm bore of pipe.

S&F 100mm bore CI sand cast branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including oval access door complete all as spd and directed. Note :-Height of bldg Up to 5 Story the required scafolding for bldg rate are including in this Item.

All as per item No. 60 here-in-before but 75mm bore of pipe.

S&F CI in repair Cowl for 100mm bore of CI sand cast pipe.

Supply and Fix in repairs 6 levers brass mortice lock of size suitable for aluminium doors complete all as specified and directed. Make : Godrej/Harisson

Dismantling of wall lining or ceiling of any description and fixed in any position with screws complete all as specified and directed.

M&L for false ceiling of gypsam board 12mm thick fixed over grid of size 600mm x 600mm made with GI channel for main runner (along short span ) of size 50mm x 50mm x 0.35mm thick and cross runner (along long span) of size 45mm x 12mm x 0.35mm. Main & cross GI runner (in any pattern/design as directed at site) fixed to suspended angle (vertical) of size 15mm x 15mm x 0.35mm thick to hange with bottom of roof incl all necessary drilling and fixing of screws etc. The surface of ceiling shall be prepared and finished with two coats of plastic emultion paint over a coat of primer complete all as specified and directed.Make:- Everest/Saint Govaind/Armstrong

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Make:- Rajshri

Solid PVC Wall Lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. Make:- Rajshri

S&F in repair 30mm thich flush sutter solide core construction with black board core and ply wood face penels commercial type both face coverd with decorative face veneer with lipping. Make:- Century/Action

S&F in repair 100 mm Aluminium anodised barrel tower bolt of exterdsection. Make:- Classic/Crown

S&F in repair 150 mm Aluminium anodised barrel tower bolt of exterdsection.Make:- Classic/Crown

S&F in repair 150 mm Brass , sliding door boalt with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled and drown brass bolt .Make:- Ashish

S&F in repair 150 mm Aluminium , sliding door boalt with sand or die-cast aluminium hasp staple (bolt type) and fixing bolt with rolled and drown aluminium bolt .Make:- Classic/Crown

S&F in repair 100 mm Stainless steel but hinges hevy duty single hold.

S&F in repair 125 mm Stainless steel but hinges hevy duty single hold.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts etc. complete all as specified and directed.

S&F in repair 100 mm Extruded Aluminium alloy handels febricated type. Complete all as specified and directed by Engr-in-Charge.Make:- Classic/Crown

S&F in repair 150 mm Extruded Aluminium alloy handels febricated type. Complete all as specified and directed by Engr-in-Charge.Make:- Classic/Crown

S&F in repair Brass cromium plated 20mm tubler rail

S&F in repair Brass cromium plated Brackets for 20mm tubler rail

S&F inrepair Door Closing mechanical device based on spring action mild steel body and tongue, anodised,with hard drawn steel spring,fixed in Door. Make :- Godrej

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Make:- Saint govind/Modiguard

S&F in repair corner glass self is made of hard toughn transperent glass 8mm thick glass with clamp and reling are made up of hevy dutty brass witch are scratich resistent.

S&F in repair 9mm thick toughn glass fixed in partition/door/windows as required size,petern,tinted/frosted/milky including all fittings handels/rubber gaskit,silicon.all as specified and directed by Engn-in-Charge. Make:- Saint govind/Modiguard

S&F Tumbler Holder including all fittings In Brass Cat part No-F880001CP (Silver)

Demolition of RCC work of any description in any position and remove all materiyal from MD Land from up to 5 story Bldg height rate are to be including.

M&L for RCC M-15 (1:2:4) 20 mm greded stone aggregate in any description in any position including necessary required form work. Complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving exc 15 cm thick but above ground level. Remove all materiyal from MD Land from up to 5 story Bldg height rate are to be including.

M&L for cement concrete type B1 (1:2:4) 20mm gredid stone aggregate plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, flooring, kerbs not provided water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F TMT mild steel bar 10mm dia and over cut to lenth bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in -Charge.

S&F Telescopic have dutty drawer chanel 8 to 22 inches size 35KG in fixed with skrew full or Over Extension Telescopic Slides - In Galvanised steel, blue passivated .Make Hettich KA 4532/550mm.

S&F Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed.

S&F in repair Plain fillets. Square rectangular or triangular not exc 25 Sqcm in section, clean sawn 2nd class soft wood fixed with screws

Cleaning of sewage main hole/sewage well through super sucker machine heavy duty vhical mounted machine with dump tank with, High pressure hydro jetting machines of open/cleaning of sewage block line in HQ/OTM Complex in SEEMA SADAK BHAWAN.

Dismantling Laid bedded and pointed in any morter stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for rubber molded chequered cement concrete tiles 32cmx 20cm x 30mm thick as in floor/treads layed in beded over 20mm thick scred bed of cement Morter 1:4 with white cement and pigment complet all as specified and directed by E-in-Charge.

Deduct total of Schedule 'A' Part II (Credit Schedule)

saroj constructions (BID ID -3349393)

Third Wave Services Pvt Ltd (BID ID -3346932)