PROVN OF MISC WORKS SERVICES IN SNCOs AND AIRMEN LIVING IN ACCN AND ADDN/ALTN TO EXISTING WATER SUPPLY PIPELINE WITH CONNECTED WORKS IN BLDG No. P-150 AT AF STN PHALODI

Amount

Dismantling of stone slab and tiles of any description or thickness in floor etc complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing galvanised with connection complete all as specified and directed.

Taking up or down 20mm bore steel water tubing galvanised with connection complete all as specified and directed by Engineer - in - Charge.

Taking up or down 25mm bore steel water tubing galvanised with connection complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

Refixing of steel water tubing galvanised 25mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F for glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

S&F for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

Fixing only in repairs PVC valveless, symphonic action type 10 ltr cap flushing cistern , low level, white , with intel, ball valve, float and handle including bracket and connect to pipes etc complete all as specified and directed.

Fixing only in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand and waste fittings, brass, chroumium plated with long screwed shank and fly nuts, flange etc complete all as specified and directed.

Fixing only in repairs of pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F in repairs of pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

Fixing only in repairs viteous china urinal,bowlntype (flat back type) complete including providing and fixing plugs badding uinal against wall in cement concrete 1:2 ,securing urinal to plugs with and including 60 mm long bass scews ,pointing aound urinal back in cement ,fixing and connected with union for discharge pipe complete all as specified and directed.

Supply and fixing in repair 32/40 mm bore PVC flexible waste pipe connecting to waste fitting for WHB, sink/Urinal complete all as specified and directed.

S&F in brass chromimum plated health faucet with flexible tube and hoder not less than 1 m length complete all as specified and directed.

Supply and fixing in repair stainless steel toilet paper holder fixed to plugs with chromium plated (CP) brass screws fixed complete all as specified and directed.

S&F in repair Stain steel Grating with waste hole 100mm dia complete all as specified and directed.

S&F in repair Stain steel Grating 100mm dia complete all as specified and directed.

S & F in repair bib taps 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification complete all as specified and directed.

S & F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extructed section fixed complete all as specified and directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S & F 100 mm long extruded aluminium alloy hinges with mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and directed.

M & L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and directed.

M & L for preparing old plastered walls surfaces and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparing old surfaces plastered or unplastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

S & F towel rail 600 mm long fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 190 gm) complete all as specified and directed.

S&F wall mounted stainless steel drope hooks with 8 pins of size 17cmx 6cm x 20cm of high quality rust free (202 grade) including fixing screws complete all as specified and directed.

S&F 20 mm thick floating granite shelves /corners to be used as soap stand of size 350 mm x 350 mm and any shape fixed after cutting chases in brick / block masonry wall and making good with cement mortar 1:3 complete all as specified and dircted .

S&F framed brackets of angles or tees with web and flanges cut to shape ,drilled and countersunk for screw, including bending and welding angles ,riveting etc . N exc each brackets,confirming to Fe.290.Gde -E-165 complete all as specified and diected.

Cutting holes into cement concrete/ brick walls built in cement mortar or lime cement mortar superficial area n exc 150 sq cm and making good in cement concrete 1:2:4 B-1 complete all as specified and directed.

Supply,installation,testing and commissioning of commercial kitchen equipment consisting of baffle hood made of SS sheet (20 gauge , SS202) complete all as specified and directed.

Supply, installation,testing and commissioning of GI sheet 24 gauge duct for commercial kitchen equipments including all fixtures complete all as specified and directed.

Supply, fixing and testing exhaust fan 600mm sweep, 650 Volts, 900 RPM, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation, etc., not exceeding 10 Sqm on plan in soft /loose soil; & getting out complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate, in foundation filling and mass concrete complete all as specified and directed .

S&F Pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall fixed self tapping screw as specified complete all as specified and directed.

S&F steel work in tubular trusses post,purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new surface any description complete all as specified and directed.

S&F 8mm dia 125mm to 200mm long hook bolts complete all as specified and directed.

KRISHNA CONSTRUCTION COMPANY

Beenu Co. Company