Construction of SDVO Building at Puri for 2025-26

Earthwork excavation of foundation in ordinary soil including levelling & dressing the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost, conveyance of all materials, labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge.

Providing Plain cement concrete (1:3:6) in foundation using 4Cm Size black hard crusher broken granite stone metal of approved quality from approved quarry including lowering laying and compacting concrete in layers not exceeding 15cm.thick, watering and curing including cost, conveyance, royalty and taxes of all materials, all labour and T&P etc. complete as directed by the Engr.-in-charge.

Supplying and filling in foundation trenches and plinth with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.

Providing Plain cement concrete (1:2:4) using 12mm. Size black hard crusher broken granite stone chips of approved quality from approved quarry including lowering laying and compacting concrete in layers not exceeding 15cm.thick, watering and curing including cost,conveyance, royalty and taxes of all materials, all labour and T&P etc. complete as directed by the Engr.-in-charge.

R.C.C. M-25 in Slab using 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries T&P required for the work etc, complete in all respects as directed by the Engineer-in-charge . Column footing

Plinth Bend

Column Superstructure

Lintel

Chajja

Staircase

Shelves

Roof Slab

Portico fins

Cutting, Straightening coiled or bent up M.S. rods or Tor steel welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost).

Flyash brick masonry in cement mortar of mix (1:6) with cement and screened & washed sand for mortar after immersing the bricks in water before use in foundation and plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as direction by the Engineer-in-charge.

Superstructure

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.

Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respect with providing grooves as directed by the Engineer in charge.

Providing 6mm thick Cement Plaster(1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment with ordinary Portland cement (OPC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of apperoved quality complete with frame, shutters and all fitting and fixtures. including cost, conveyance, taxes of all materials, cost of all labour, sundries and T&P etc. required for the work complete, as per direction of the Engineer in charge.

Supplying fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame all fitting and fixtures.

Providing, fitting and fixing in position of W.P.C choukaths in all floors at all height for door and windows including two coats of coaltaring to wall side faces and fixing the same in position including cost, conveyance, and taxes of all materials with all labour and T&P etc. complete as directed by the Engineer -in -charge.

Providing, fitting and fixing in position of W.P.C shutters in all floors at all height for door and windows including two coats of coaltaring to wall side faces and fixing the same in position including cost, conveyance, and taxes of all materials with all labour and T&P etc. complete as directed by the Engineer -in -charge.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR black board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixing etc. complete.

Providing fitting and fixing in position 12 mm G.I square bar Grill with G.I. flat and angles of approved drawing and design including cutting bending the angles and flats to proper sizes welding, chamfering etc. fitted and fixed to the walls with C.C.(1:2:4) including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries and T&P etc. required for the work complete, as per direction of the Engineer in charge.

Providing,supplying,fitting & Fixing of (2 x 4)size Vitrified tile flooring laid over 25mm thick bed of cement mortar 1:4 ( 1 cement : 4 sand) including finishing the joints with white cement & colour figmentmix & cost of all materials, labour,T&P,Sundries etc.all complete as per the direction of the Engineer-in-charge.

Providing,supplying,fitting & Fixing of (2 x 4 )size Vitrified tile in dados, skirting riser of stepps on 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) including finishing the joints with white cement & colour figmentmix & cost of all materials, labour, T&P, Sundries etc.all complete as per the direction of the Engineer-in-charge.

Providing,supplying,fitting & Fixing of Industrial tile flooring laid over 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 sand) including finishing the joints with white cement & colour figmentmix & cost of all materials, labour, T&P,Sundries etc.all complete as per the direction of the Engineer-in-charge.

Providing,supplying,fitting & Fixing of Granite tiles in floors laid over 25mm thick bed of cement mortar 1:4(1cement :4sand) including finishing the joints with white cement & colour pigmentmix & cost of all materials,labour, T&P,Sundries etc.complete as per the direction of the Engineer-in-charge.

Providing,supplying,fitting & Fixing of (2 x 2)size Granite tiles in dados, skirting riser of stepps on 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) including finishing the joints with white cement & colour figmentmix & cost of all materials, labour, T&P, Sundries etc.all complete as per the direction of the Engineer-in-charge.

Providing,supplying,fitting & Fixing of Glazed ceramic tile in dadoos, skirting riser of steps on 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand ) including finishing the joints with white cement & colour pigmentmix & cost of all materials,labour, T&P, Sundries etc.complete as per the direction of the Engineer-in-charge.

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia and 2mm thick circular pipe with balustrade of size 32mmX32mmX2mm @0.90mtr. C/C and stainless square pipe bracing of above size in three rows in staire case as per approved design and specification, buffing, policing etc. including cost, conveyance of all materilas and labour,T&P required for the work as per direction of Engineer-in-charge.

Supplying and fixing of Wall Paneling made of aluminum anodized section frames conforming to Aluminium section as horizontal and vertical members with 600mm c/c fixing of 9mm thick BWR ply with 4mm thick pasting finished with melamine polishing complete.

Providing fitting and fixing of Armstrong Board ceiling with aluminium section complete including cost of all materials, labour, T&P required for the work as directed by the Engineer-in-charge.

Finishing wall surface of walls with Cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as directed by the Engineer-in-charge.

Painting two coats to wall surface with plastic emulsion paint over a coat primer by means of brush to inside surface of walls after cleaning the surface including watering and curing, scaffolding etc. complete including cost, conveyance, royalty and taxes of all materials with labour, T&P, sundries etc. complete as directed by the Engineer-in-Charge.

Wall painting 2 coats with weather coat paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc.complete as directed by the Engineer-in-charge.

Painting two coats with enamel paint over a coat of priming of approved quality and approved shade confirming to ISI on steel/wood works to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, conveyance, taxes of all materials, cost of all labour, sundries T&P scaffolding etc. required for the work complete in all respect as directed by Engineer-In-Charge.

Providing, fitting and fixing of different dia G.I.Pipe including cutting to sizes, grinding and welding as per approved design and specification including cost of all materials, labour, T&P required for the work as dircted by the Engineer-in-charge.

Providing fitting & fixing of Tata blue Scope GCI sheet in roof including cost of labour,T&P etc.complete as directed by the Engineer-in-charge.

Hire charge of Hydraulic excavator 1.00 cum bucket capacity including POL and operator with all T&P etc Complete as per direction of Engineer-in-charge

Internal Electrical Work Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia Non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire- Finolex/ L&T/Anchor/Polycab/Havells/Great white/RR/V-gurad/HPL 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia

2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

4 X 6 sq.mm + 1 X 2.5 sq.mm -do-

Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required. 1 X 1.5sqmm

S/F of Ding dong bell (Make - Cona/ Anchor/ Greatwhite)

S/F of Clamp & S.hook

Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light.

Supply of following PVC Almunium armoured XLPE cables insulated ISI Marked ( make-Havells/polycab/KEI/V-Guard/Glostar) 4c x 25 sqmm

Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 10 Watt 2 inch LED tube lights

20 Watt 4inch LED tube lights

Supply and fixing of LED round / square recess mounted panel Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 18 Watt (210 mm x 210 mm)

Supply and fixing of LED steet light (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 45watt

Supply and fixing of Different type fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent) 48inch Ceilling fan

S/F of 400 mm Wall mounted fan (Make - Havells - plantina/ Usha - Colossus, Mist air/ Crompton - Window flo)

S/F of Exhaust fan12inch (Make - Havells/ Usha/ Crompton/ Almonard)

MCB Enclosour (Make-Legrand/Simens/Hager/Schinder) 63A-160A

Busbar Chamber with copper strip (Make-Bharat/Gec) 200A 4 way

Supply and fixing of 4pole MCCB Thermal Mangnetic Protection in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required.(Make- Havells/ C&s/ L&T) 125A 25KA

Supply and fixing of following different DD DB BOX .(Make-Legrand/ Hager/ Simens/ schneider) 8way, SPN DD DB BOX.

4way Double door DB BOX. TPN

Supply and fixing of 6Amp to 32A rating 240 V/415 V C series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand/ Hager/ Simens/ schneider) 6 to 32 SP MCB

6 to 32 DP MCB

63A FP MCB

Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required.

Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt as required.

Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required.

Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required.

Supply & Fixing of Different Ac Machine (STAR RATED) (Make:O-General/Diakin/Mitsubishi) 1.5 Ton

S/F of Stabilizer (Make - V-Guard/ Microtec/Leotonics/ Alfa/ L. Power) 130 to 280 volt 4KVA

Copper cooling Piping With Insulation and Power Cable for 2 Ton Split AC

S/F of Nylon Netted Drain Pipe with C clamp

S/F. of Powder coated Wall Stand for outdoor unit with Anchor Fastener (For 1.5 Ton/2 Ton)

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch(Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent) ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-A

Group-B

Group-C

Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta /or equivalent)

Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)

S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 1No 15/16amp plug and switch Modular on metal box and Modular cover with all connections( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)

Supply and fixing of Modular switch ,Socket , ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent) 16Amp socket.(Modular type )( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

32 A DP modular switch with indicator, ISI marked

Supply and fixing Modular base & cover 1/2 module

Supply and fixing Modular G.I. Box 1/2/3 module

P.H. Work Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/upvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge (Supreme/ Ashirvad/ Oriplast) 20mm dia CPVC pipe GroundFloor

25mm dia CPVC pipe

32mm dia UPVC ASTM-D Pipes

32mm dia UPVC ASTM-D Pipes First Floor

25mm dia CPVC pipe

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. Ground Floor

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge Fixing 2000Ltr Roto-moulded water storage tanks-In 2nd floor

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. G.F.--250mm thick wall

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15 mm dia CP long body Bib cock (Plaza /Aquatic/ Amber/ Kerovit/Somany)

15 mm dia CP two way Bib cock(Plaza/Aquatic/Amber/Kerovit/Somany)

15mm dia CP angle stop cock(Plaza/Aquatic/Amber/Kerovit/Somany)

25mm dia CPVC Ball valve(Supreme/Ashirvad)

32mm dia CPVC Ball valve(Supreme/Ashirvad)

15mm dia CP flange

15mm dia CP extension piece

15mm dia CP Health Faucet (Hindware Health Faucet-Cat No-F160002CP

15mm dia Pillar cock (Jaquar KUP-CHR-35001PM)

15mm dia Concealed stop cock(Plaza/Aquatic/Amber/Kerovit/Somany)

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia U-PVC SWR pipe(Supreme/Ashirvad/Oriplast)

110mm U-PVC door Tee

110mm dia U-PVC Plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC plain shoe bend

110mm dia U-PVC offset without ear

110mm dia. U-PVC socket plain

110mm dia U-PVC P trap

110mm dia U-PVC cowl

125mm dia CP grating

PVC clamp suitable for 50mm to 110mm dia pipe

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge European water closet with S trap plain with seat cover(Parryware/Hindware/Kerovit/Somay)

Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge 10 Liters capacity PVC cistern with 32mm dia flush bend (SLIMLINE WHITE (Parryware /Hindware /Kerovit/ Somay)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Wash hand basin with full pedestal ((Parryware /Hindware/Kerovit/Somay)

Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half Stall urinal (Hindware make -60002)

15mm dia urinal spreader

32mm dia C.P. dome waste

Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal of size 600mmx350mm (Parryware/ Neycer/ Hindware )

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge B.E.Mirror

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail (Plaza/ Aquatic/ Amber/ Kerovit/Somany)

CP Towel Ring (Plaza/ Aquatic/ Amber/Kerovit/Somany)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge 600mmx125mm size glass shelf with C.P guard rail

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria /Somany/ Johnson/ Orient Bell to be pre-approved by the Engineer in charge) In Ground floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Glazed tile of size 45cmx30cm Kajaria/Somany/Johnson/Orient Bellto be pre-approved by the Engineer in charge) In Ground floor

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm. (Fiber space/ Darwaja/Tarini doors/Trinayan composits/SM doors) In ground floor & 1ST Floor

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mmx760mmx460mm

R.C.P.C Cover(18 round man hole cover)

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mmx910mmx910mm

R.C.P.C Cover(24" round man hole cover)

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.40m dia x 2.00m deep

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia alround concrete

Construction of 20 users Brick septic tank (1 Nos.) Supplying all labour , T&P and earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge

Extra lift of 1.50m or part thereof over the initial lift of 1.50m

Supplying all materials,labour, T&P and providing Ist class K.B.Brick work in C.M (1:3) in foundation and plinth including watering, curring, conveyance of all materials to site.

Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12 mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step Iron in 20mm diameter MS steel bars and fixing into walls of manhole / septic tank duly embedded in cement concrete (1:3:6) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc complete as per specification and direction of the Engineer-in-charge

Supplying all materials,labour,T&P and providing vent base in cement concrete(1:2:4) using 12mm size HG chips all complete including watering,curing,conveyance of all materials to worksite,payment of royalty texes etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all labour, T&P and filling in foundation and plinth with excavated earth including watering and ramming etc. complete as directed by the Engineer-in-charge.

Please Enable Macros to View BoQ information