Tender For Renovation, renovation of Jugmandar Hall and construction work of FRP (facade) inside the hall and outside the main building

ACOUSTIC PET WALL PANELING. ( 0.9 NRC ) Acoustic wall paneling - Providing & fixing Acoustic wall panelling work . The work will also include all cost for creation of niches for installation of AV equipments and electrical fittings wherever required. The veneer and polish shade and finish will be as per consultant.The cost will include all accessories or any material which may be required to complete the work as per specification drawings and as directed by the consultant.Framing: frame work cosisting of 50 mm x 0.7 mm thick Drywall stud channel at 600 mm intervals with track channels at bottom and top including all accessories from materials that company with ASTM C645 and A653 with a minimum GGO coating or equivalent filled with 50 mm thick 40 Kg/m3 density enviroment and human health friendly rock wool made with Ecose technology to be held in position with chicken mesh of 18 mm SWG leaving a minimum 50 mm airgap. Then another layer of framing ( if required) will be done and the rear side Verticle support ( if required) will be provided by fixing the frame to the ceiling slab above.Front Face Finising Material: Polyster Pet panels ( colour as approved by consultant) glued to 9 mm thick Polyster Pet Panel over a layed of 9 MM thick

ACOUSTIC-PANELING-WOODEN-PLANK : Providing & fixing acoustic wall (120mm) with the 'U' channel gid of size 50x50mm thick made out of GI sheet, 0.50mm thick, ISI mark after an airgap of 20mm to be created using isolation clips to be fixed to the walls. The grid size will be 600x600 fixed to wall using all screws of Stainless steel. Cavity of grid shall be filled with acoustic insulation 50mm having density 64 kg/cum confirming to IS 8183 to achieve the 1.0 NRC value. The acoustic wall is to be finished with 8mm perforated commercial ply board. The above mentioned structure is to be finished with 16mm thick grooved wooden acoustic panel of size 575mmx2420mm, groove size 3.2mm. The wooden acoustic panels to be backed with black acoustic fleece. All joints of wooden acoustic panel shall should have dowal connection to avoid any sagging/unevenness. All wooden acoustic panels should be fixed on GI 'Z' clamp made out of 1mm thick GI sheet of size 30mmx30mm collar and 25mm high to match with the installed GI frame. The grooved acoustic panel laminated in desired shade as per Engineer In charge/ Architect's approval.Make (Century/Action tesa/equivalent

Providing and fixing at all heights false ceiling with Powder coated grid system with 15 mm thick soft glasswool core tiles having NRC greater than 0.7. The grid shall be fixed @ 600 mm centre to centre both ways. The colour of 24mm T-grid system and acoustic tile shall be white. Main runner of grid shall be fixed @ 1200 mm centre to centre in longer direction with cross Tee of length 1200 mm @ 600 mm centre to centre. Cross Tee will be further connected with another cross T of length 600 mm. The perimeter runner shall be fixed on wall with connect angle trim fixed at 300 mm centre to centre on wall with 50 mm long drive all screws. Main runner shall be suspended with adjustable hanger, installed at 1200 mm centre to centre. Maximum distance of hanger from wall shall not be more than 600 mm. Hanger shall be fixed firmly to the ceiling and truss by 4m GI wire & anchor fastner as per recomendations of maufacturer . Complete as per drawing ,specification and direction of Engineer-in-charge.( Make:- Armstrong, Anutone,RK ceiling, Saint Gobin)

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

STAGE FLOORING - LAMINATE WOODEN wooden flooring planks of size 1290 x 100 x 28 mm (8mm thick laminated floor class of use 23/33 having a wear resistance level of AC-4 as per EN 13329,astmc-1028, DIN-52612,DIN-54245, EN-717-2,DIN-51953

LOOP PILE CARPET Loop pile carpet with 4 mm thick pu underlay & glued as per international fixing standard Specification Pile material - 100% olefin polypropylene Pile yarn weight - 650 gsm Backing type - pvc reinforced by glass fiber. Flame resistant - pass Underlay - 6mm polyurethane base Make: Capital/Jupiter/equivalent

ACOUSTIC DOOR. Door Size - 2400 x 1200 mm Thickness - 75 mm Technical Specification: Door Frame: 2nd class teakwood door frame of section 125 mm x 75 mm with intumescent fire paint & acoustic seal RP24 magnetic type. Door Shutter : 75 mm Thick having 38 dB acoustic cum fire door having infill of 50 mm thick resin bonded glasswool of 24 kg/m3 density coated with FR acrylic sealant sandwiched between two 9 mm thick calcium silicate board. The door to be finished with 12 mm MDF veneer facing and finished with french polish on both side. All joints sealed with Dow corning sealant.The Intumescent sealent is used to fill the gaps between board & internal wooden members. Acoustic rubber seal RP24 magnetic type fixed both side of door stile.

CHAIRS

Providing and fixing VIP Push back type Auditorium chairs with PU seat and back and upholstered with fabric. (Godrej/Wipro/Aroma)

Providing and fixing Push back type Auditorium chairs with PU seat and back and upholstered with fabric.(Godrej/Wipro/Aroma)

MAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2Nos.. air breaker contactors (Schneider/SIEMENS), 2Nos.. micro switches for auto stop, 3 Nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering.

REAR CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 3mm steel rope wire, 1HP motor (Crompton) 2 Nos., air breaker contactors (Schneider/SIEMENS), 2 Nos.. micro switches for auto stop, 3 Nos.. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm. The curtain should be stitched in double gathering.

WINGS :-Providing and fixing cloth wings made out of black glazed cotton cloth fixed on overhead pivote track with single sided 6mm ply.

SITC of MAIN FRILLS :- Providing and fixing average frills made out of double gathering velvet cloth to be installed above the stage on 25 mm dia dual barrel MS pipe black paint.

Back FRILLS :-Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 25mm dia MS

SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site condition.

SITC of Fixed Stage light bar, length 15mtr made using 48OD MS Pipe with Matt black texture finish and matt black painted.

SITC of Motorised integrated FOH bar/winch of 11Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV 90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system.

Supply, Installation,Testing and Commissioning of Motor Control Panel cum remote control 2 Way providing power input for curtain motors /Light Bar , made out from M.S sheet dulyy painted,internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features

Stage Lighting Work

Supply, Installation, Testing and commissioning of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Cree/ Philips / Nichia or reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED's Source Unlimited Colour Mixing through DmX 0 - 100% Linear dimming In built presets for different colours Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR's 65dB 130dB Sound sensing capacity Power In and Out Connections High precision colours, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.

SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2 13:2014 Approved make Martin Lightings / Leksa / ETC /FD Lightings

The COB PAR 100W is an extremely powerful, technically very sophisticated headlamp with a warm white 100 watt COB LED. With its broad dispersion and extremely high luminosity, it ensures outstanding photographs. More than 3 DMX channels let you create strobe effects or set the dimmer from 0 - 100%. In particular, the seamless fine adjustment make the COB PAR 100W interesting. Directly on the on-board menu, the luminosity can be adjusted seamlessly. So you can adjust the brightness color yourself. With only 100 watts of power and only 2.7kg in weight, the COB PAR 100W is economical, compact and powerful. At the high LED output of 200 watts, it generates very bright light in pleasant warm white

LED 2x2 blinder matrix Light used in Entertainment applications, Night club, Fashion shows, Film, Band performances, Discotheque, Stage performance , TV studio and large-scale show etc fixture with advanced COB LED technology with below specifications:- • Power Consumption: 400W • Power Supply: 240 AC, 50- 60Hz • Light Color: Single color warm white / Cool Light • Channel: 4/8 channel • Lifetime: Over 50,000 hours • Beam Angle: 30° • Control mode: DMX512,Master/Slave,Auto Run,Sound active. • Dimmer: 0 -100% linearly adjustable • LUX: 8200 LUX @ 2m • IP Grade: IP20

SITC of 200W LED Blinder Light 30 Degree complete with 3200K CCT 2x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 220W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2- 13:2014 Approved make Martin Lightings / Leksa / ETC /FD Lightings

Supplying Installation testing & Commissioning of LED Bar Light for Cyclorama Lights having RGBW output, 18 LED's 10W RGBW LEDs, Angle : 60°, Strobe + Duration Effect Engine, DMX- 512, Color LCD intuitive menu system, 90 - 240VAC, 240W - Power Consumption, complete as required. CE CertifiedApproved Make: TDH

Fresenel lights are widely used in photography, film, and theater due to their functionality. These lights utilize a unique lens design, the Fresenel lens, which allows for adjustable focus and a soft, controllable beam of light, Power Consumption : 220W, Input Voltage : AC 100V ~ 260V, 50Hz, Optical Arrangement: Beam Angle Zoomable 10° ~ 40° /10° ~ 60°, DmX Zooming Option Available, German Made Threaded Glass Fresnel Lens,Lamp Source: LED COB Based Source, CCT 3200K & 5600K 200W Chip on Board, Colour Rendering Index 95, Tel. Lighting Consistency Index 95, R9 Value 90 - 50,000 Hours Burning lifeDmX 5 Pin In and Out, Power Loop In and Out, Ingress Protection IP20, Aluminium Body with Black Powder coated finish, LCD Easy View Display, Control: DmX 512 Through 5 Pin XLR, Manual Mode Operation, 2 Channel DmX Control, Master Slave Mode through keys / Pots, Working Temperature +45° ~ -30°, Copper Tube – Sensor Based Cooling system, Light Compatible upto 10K FPS Shoots. Certificates : CE and ISO for lighiting.

Digital Lighting Console with 512 DMX channels• 512 DMX Channels.• 1000 scenes memories.• 12 hot keys for scene recall.• 2 cross fade for scene change• save 512 group of chasers and each chaser contains 256 steps• Audio control.• DMX connection: XLR 5-pin• Weight: 2.3kg• Dimension: 482(W)x55(H)x176(D)mm

Supply & Fixing of DMX Data Splitter, 1 x IN and 8 x Out or more DMX-512 Data Splitter, suitable oth for Dimmer & Intelligent Lights.

DMX Point with 3 pin XLR Connector, 2 core sheilded DMX Wire .

SITC of Diecast MS "C" clamp with safety locking chain, duly powder coated in black matt texture finish and technical specifications as below. • Finish - Pretreated and black epoxy polyester powder • Safe working load – 150Kg

SITC of Safety bond with lock clip (Safe Working Load 100Kgs ) to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly including all accessories etc complete as required

Light ponit with 1.5mm 3 core wire, socket box 4"x4" with 15 Amp multi socket and DMX Connector 3 pin mattel base connector.

SITC of 12 Way Direct Lighting Distribution Board made up of MS CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish consisting of suitable rating TPN incomer, SP MCB's for the junction boxes fixed on the top of the grid including wiring and busbar connection with proper earthing and Hinged door with magnetic door lock including all accessories etc complete as required.

Installation

HIGH SIDE

SUPPLY OF DUCTABLE UNIT 11 TR R 410 A SINGLE CIRCUIT MAKE : BLUE STAR

LOW SIDE

INSTALLATION, TESTING & COMMISSIONING OF DUCTABLE AC 11 TR

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF COPPER PIPING WITH INSULATION & HANGING AGGAGEMENT MAKE : MANDEV/INDIGO/MEXFLOW

31.8 MM DIA 1.0 MM THICKNESS

15.8 MM DIA 0.8 MM THICKNESS

SUPPLY, INSTALLATION, TESTING & COMMISSIONING COPPER WIRE 4C X 4 SQMM BETWEEN INDOOR & OUTDOOR OF DUCTABLE UNIT MAKE : POLYCAB/KEI/FINOLEX

SUPPLY, INSTALLATION, TESTING & COMMISSIONING COPPER WIRE 4C X 2.5 SQMM BETWEEN INDOOR & OUTDOOR OF DUCTABLE UNIT MAKE : POLYCAB/KEI/FINOLEX

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF GI DUCTING COMPLETE WITH SUPPORT & HANGING ARRANGEMENT MAKE : TATA/ SAIL/ JINDAL

22 GAUGE (0.8 MM THICK)

22 GAUGE (0.6 MM THICK)

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INSULATION OF DUCTING 10 MM THICK MAKE : AFLEX, K FLEX, SUPREME

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF ACCOUSTIC OF DUCTING 50 MM THICK

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF CANVAS FLEXIBLE CONNECTION B/W INDOOR UNIT & DUCT

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF UPVC DRAIN PIPING WITH INSULATION 32 MM DIA

REFRIGERANT GAS CHARGING OF DUCTABLE AC 11 TR

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF COPPER CABLE 4C X 10 SQMM FOR POWER SUPPLY OF OUTDOOR UNIT OF DUCTABLE AC 11 TR

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 63 A 4P MCB WITH MCB BOX OUTDOOR TYPE

MS STAND OF OUTDOOR UNIT

RECTIFICATION OF OLD SYSTEM OF 40 TR

SITC of FOH Line Array Element: Modular active line array 8" LF and 3" HF driver, 136 db. spl & dual 15" subwoofer with 136 db. spl; Freq. Response - 75Hz - 20 kH; Power Handling (Peak) - 1500W Make:- JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose

SITC of Delay speakers: LF 15" ferrite magnet woofer active speaker 2 way speaker; HF 1.5” poly-annular diaphragm compression driver 133 dbspl; 1000 watt continuous; Freq. Response - 48Hz - 20 kH; Power Handling (Peak) - 1000W; Dispersion: 90° x 50 (Make:-JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose)

SITC of Line array frame for single point suspension (Make:-JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose)

SITC of Stage monitor: LF 8" active speaker 500 watts continuous, 120 db. spl with Bluetooth; (Make:-JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose)

SITC of Subwoofer Dual 15-inch woofers; Frequency range: 32 Hz–250 Hz (-10 dB); 136 dB maximum SPL; Built-in DSP includes crossover management, EQ, limiting, correction filters, phase-corrected processing and driver-protection circuitry; Integrated 1,000 watt-per-channel, 6-channel amplifier offers the most channels in its class (Make:-JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose)

SITC of Digital Signal Processor 2 Analogue Inputs; 6 Analogue Outputs; 48 kHz DSP on all channels; Freq. Response : 20 Hz - 20 kHz; Dynamic range > 114dB (20 Hz - 20 kHz); THD :< 0.002% (20 Hz-20 kHz (Make:-JBL/ Tannoy /QSC / Renkus-Heinz / BRITISH ACOUSTIC/ Martin/Bose)

SITC of Digital Mixer 10-inch multi-touch touchscreen offers a wealth of on-screen information while also providing confident hands-on control Anti-Feedback and Room Tuning Wizards simplify complex equalization tasks ; Two real-time analysers (RTA) provide instantaneous display of channel tonal balance and room response; Touch-and-route patch matrix provide easy “melting” and rearrangement of inputs; 14 Aux mixes provide ample monitor configuration options; Eight sub-groups with 6-band full parametric EQ, variable high- and low-pass ?alters and limiter may be linked for stereo; A gain sharing Automatic Microphone Mixer is available for all 24 mic/line input channels; 32-channel direct-to-hard drive record/playback — capture and recall performances without the need for an external computer (Make:-Yamaha/ Allen & heathz / BRITISH ACOUSTIC/QSC/Sound kraft)

SITC of Wired microphone Audio frequency bandwidth 40 - 20000 Hz; Sensitivity 2.5 mV/Pa; Polar Pattern Cardioid; metal case and wire-mesh grille (Make:-AKG/SHURE/ OSL/SENNHEISER/BOSCH)

SITC of Wired Podium microphone with 18" gooseneck with base havimh ON/OFF button (Make:-AKG/SHURE/ OSL/SENNHEISER/BOSCH)

SITC of 10" display 10 touch points, with wifi connectivity with 64 gb hard disk (Make:-APPLE/SAMSUNG/LENOVO)

SITC of Microphone cable 3 core 2 sqmm PVC insulated with sheilding for microphones coonectivity (Make:-Belden/Netmass/Dcab/Polycab)

SITC of Speaker cable 2.5 sq mm PVC insulated 2 core cable for speakers (Make:-Belden/Netmass/Dcab/Polycab)

SITC of cat 6 cable (Make:-Belden/Netmass/Dcab/Polycab/Dlink)

SITC of Connecters and accessories XLR, RJ 45, Spekon connectores with thimbles, sleevs etc (Make:-Belden/Netmass/Dcab/Polycab)

SITC of Projector: 3 LCD system; Aspect ratio 16:10; Resolution WUXGA (1920 x 1200 pixels); Laser diode; cd lm 7000 lm ; RGB / Y PB PR input connector: 5 BNC (female) RGB input connector: Mini D-sub 15-pin (female); DVI input connector: DVI-D 24-pin (single link), HDCP support HDCP: v1.4; OUTPUT 1 Monitor output for Input A/Input B Connector: Mini D-sub 15-pin (female); USB-1 Type-A x 1 USB-2 Type-B x 1 (for service); REMOTED-sub9pin male/RS232C LAN RJ45, 10BASE-T/100BASE-TX/1000BASE-T; with extended lense Make:- SONY/PANASONIC/BARCO/CHRISTIE

SITC of Motorised Projection screen: Matte White Size: 210” (16:9); Viewing Area 1500 x 2670 mm.; Elegant Square Shaped Housing; High Gain Matte White Fabric ; Synchronous Motor with RF. Remote.; View Angle >160 ° (Make:-LIBERTY AV/GRAND PRO/ELCOR)

SITC of frame/bracket for single point suspension

SITC of HDMI matrix switcher: Connects any of 4 HDMI sources to any of 4 HDMI displays; Max. Data Rate 6.75 Gbps (2.25 Gbps Per Lane); Max. Pixel Clock 225 MHz Compliance HDMI (3D, Deep Color); HDCP 1.4 Compatible Consumer Electronics Control (CEC); Max. Resolution Up to 1080p (Make:-ATEN/KRAMER/CRESTRON/EXTRON)

SITC of Digital Podium with 19" touch screen Mild Steel Material | Stand alone Digital Podium | Wheels with lock | Smooth round edge at the top | Tray For Keyboard | Single sliding tray with lock for protection of the Interactive Panel and Controller | Space for 19” or 22” Interactive panel with Motorized angle adjustment | Drawer with lock for Visualizer | Shelf forkeeping laptop or Documents | Locks for safety | Standard Rack to keep all the equipment and PC | RFID Lock mechanism | Separate space for Vertical Desktop PC | Two Door system – One for Rack and other for PC | PC door with small window for On/Off. | Front Door for Servicing | Lock Mechanism : 3 options in lock- Manual key, RFID and Biometric (finger) for better security and ease of use (Make:-ATSDC/INGRESS/AHUJHA)

SITC of PTZ Camera; USB based : Yes; Zoom : Minimum 12X Optical Zoom , 1/2.8 inch high quality HD CMOS sensor; U3.0: 1920X1080P60/30fps; White balance; Auto/Manual/OnePush/ 3000K/ 4000K/ 5000K/6500K; Video Interfaces; SDI,DVI(HDMI),LAN,RS232(IN/OUT),RS485, A-IN; Image Code Stream; Dual stream output; Video Compression Format; H.264, H.265; Control Signal Interface;RS-232 Ring through RS232 output; HD IP Interface;100M IP port(100BASE-TX); Network Protocol; RTSP/RTMP, ONVIF, GB/T28181; Pan Rotation±170°; Tilt Rotation-30°+90°; Pan Control Speed 0.1 -100°/sec; Tilt Control Speed0.1-45°/sec; Preset Number255 presets (Make:-ATSDC/LUMENS/QCS/INGRESS)

SITC of Trasmitter and Receiver or hdmi to cat6 and cat 6 to HDMi 75 meters (Make:-ATEN/KRAMER/EXTRON/CRESTRON)

SITC of Compact & Secure 4K Wireless Presentation DeviceConnect using conventional Wi–Fi and/or LAN Supports Windows™ and Mac™ laptops, Chromebooks™, iOS™ and Android™ mobile operating systems High–quality 4K@30Hz video streaming Two participants can present simultaneously Quick and Reliable Wireless Connectivity — A simple and intuitive user interface enables iOS, Android, Chromebook, PC, and Mac device users to instantly connect to a main display without a dongle. 2.4GHz/5GHz Wi–Fi and MIMO antennas establish and maintain a fast and reliable connection. High Quality Video Streaming — Supports up to 4K@30Hz resolution (using the VIA app Multimedia feature). (Make:-KRAMER/BARCO/ATEN)

SITC of HDMI cable 15 meter (Make:-Belden/Kramer/Dcab/Polycab)

SITC of HDMI cable 15 meter (Make:-Belden/Kramer/Dcab/Polycab)

SITC of cat 6 cable (Make:-Belden/Netmass/Dcab/Polycab/Dlink)

SITC of Connecters and accessories (Make:-Belden/Kramers/Dcab/Polycab)

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick Thickness above 10 mm up to 25 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge.

DISMANTLING OF EXISTING CHAIRS

WIRING

WIRING IN STEEL & PVC CONDUIT

ewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as

HAVELLS STANDARD 400 millimeter Bracket mounted fan for Wall mounting

INSTALLING CEILING LIGHTS 6 INCH HAVELS 15 W

COVE LIGHT STRIPS HAVELS

FOCUS LIGHT FOR STAGE

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specificationand also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

PART A

tow piller and top design, side walls design, balcony parapet ,entrance of jugmander hall, side wall of entrance mural

MS iron fabrication

PART B

exterior façade of nagar nigam building , main office piller arches roof

design of main building protico all three sides , MS iron fabrication work

tranportation 'fixing'and installation with one year maintenance including art work aesthetics /creative consultancy

M/s Satender Bhandari (BID ID -390062)

M V BUILDCON (BID ID -390002)