SPECIAL REPAIRS TO EAST ANNEXE AT AFS BIDAR

Amount

Schedules of Works

Taking down chowkats or frames exc 1.5 sqm and n.exc 4.0 sqm each but with shutters (without taking off shutters from the frame), all as directed.

Supply & Fixing of UPVC (Unplasticized Poly-Vinyl Chloride ) single panel openable multichambered and stiffened / reinforced framed Doors using 62 mm x 70 mm x 2.3mm (±0.2mm) size sections alround as main frames with necessary Mullion sections of sizes 76 mm x 62 mm as sash bars and shutters made with the profile sections of size 102 mm x 62 mm, including the cost and fixing of Half 5mm thick clear Toughened glass / Half 5mm PVC Panel in shutters with necessary beadings, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have cylindrical lock and handle with key and other associated fittings, to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the door unit to the existing masonary with anchor fastener as required. The gaps between the Door frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation at site.

Supply & Fixing of UPVC (Unplasticized Poly-Vinyl Chloride) Double panel openable multichambered and stiffened / reinforced framed Doors using 62 mm x 70 mm x 2.3mm (±0.2mm) size sections alround as main frames with necessary Mullion sections of sizes 76 mm x 62 mm as sash bars and shutters made with the profile sections of size 102 mm x 62 mm, including the cost and fixing of Half 5mm thick clear Toughened glass / Half 5mm PVC Panel in shutters with necessary beadings, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have cylindrical lock and handle with key and other associated fittings, to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the door unit to the existing masonry with anchor fastener as required. The gaps between the Door frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation at site.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material & Labour for Precast cement concrete block masonry with solid blocks, type C1 1:3:6 (using 20mm graded crushed hard granite stone aggregate) exc 10cm width & setting in C.M 1:6 complete all as specified and as directed.

Material & Labour Plain cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, flat rough finished surfaces of concrete complete all as specified and as directed.

Material & Labour Reinforced Cement concrete Type B1 1:2:4 (12.5 mm graded aggregate) slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

Material & Labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Supply & Fixing of 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Material & Labour for Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations complete all as specified and as directed.

Material & Labour Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for Preparing of New plastered surface of wall and applying two coats of distemper oil bound over primer coat, complete all as specified and as directed.

Material & Labour for Complete removal of existing treatment and preparation of old surface, applying two coats of oil bound distemper over primer coat, complete all as specified and as directed.

Material & Labour for Complete removal of existing treatment and preparation of ceiling and applying two coats of oil bound distemper over primer coat, complete all as specified and as directed.

Material & Labour for Applying 1mm thick wall care putty on wall complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removal of debris out of premises complete all as specified and directed.

Material & Labour 25 mm thick plain cement concrete Type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub base for floor tiles

Material & Labour for Vitrified Ceramic Light Shade tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & Labour for Vitrified Ceramic Light Shade tiles 8-9 mm thick (square/ rectangular) polished, in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Supply & Fixing Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4 etc. complete all as specified and as directed.

Supply & Fixing of Stainless steel railing 304 grade of Tubular, square, rectangular pipes including all fittings fixed with staircase, floors with complete all as specified and as directed.

Material and Labour for 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed.

Material and Labour in repairs for 1mm thick laminated mica in any colour finishes fixed with adhesive material for shutters of ward robes, cabinets etc. complete all as specified and as directed.

Material and Labour for toughened glass 10 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape drilling holes required complete all as specified and as directed.

Supply and Fixing for steel with nylon ball bearing soft close wardrobe sliding double track door roller, top track and bottom track (Two door sets) with running gear for concealed fixing for two wardrobe sliding doors, wooden sliding doors, glass sliders etc. top & bottom track groove mount of capacity 50 Kgs for complete all as specified and as directed.

Supply and Fixing for G-shaped anodized aluminium handle profile and sliding wardrobe single groove type track, etc., for shutters etc in any colour and designed to perfectly complement 18/19mm ply fixing with kitchen cabinet, ward robes etc complete all as specified and as directed.

Supply and Fixing for steel slip-on soft closing concealed hinges with nickel plated for high corrosion resistance of dimensions 110x60x30mm and weight 150 gm for kitchen cabinet, ward robes etc complete all as specified and as directed.

Supply and Fixing for Brass double ball tension roller catch touch latch's of 40mm long for wardrobe, kitchen cabinets etc complete all as specified and as directed.

Supply and Fixing for 125mm long stainless steel door handle finished with brass antique fix with brass screws complete all as specified and as directed.

Supply and Fixing for plain basket SS 304 grade of size 370 x 485 x 200 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6150 or Techno commercial equivalent approved make.

Supply and Fixing for cup and saucer basket SS 304 grade of size 370 x 485 x 100 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6157 or Techno commercial equivalent approved make.

Supply and Fixing for perforated cutlery basket SS 304 grade of size 370 x 485 x 100 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6160 or Techno commercial equivalent approved make.

Supply and Fixing for plate basket SS 304 grade of size 370 x 485 x 200 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6164 or Techno commercial equivalent approved make.

Supply and Fixing for stainless steel soft close telescopic slides of length more than 450 mm and capacity upto 45 Kgs for kitchen cabinet, ward robes etc complete all as specified and as directed. Make- Godrej or Techno commercial equivalent approved make.

Supply & Fixing in repairs Stainless steel sink made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed.

Supply & Fixing 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule etc. complete all as specified and as directed.

Supply & Fixing in repairs 15mm bore stop valves/angle cock, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as directed.

Supply & Fixing in repairs PVC waster pipe 32mm bore for WHB/Sink/Urinal, etc. complete all as specified and as directed. Make: Prayag or Techno Equivalent.

Material & Labour PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair complete all as specified and as directed.

Supply & Fixing in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed.

Supply & Fixing in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and as directed.

S&F in Anodized aluminium false ceiling frame work with 605mm x 605mm size snap gird fixed with screws / staples at any height, complete all as specified and directed.

M&L in 12mm thick, Mineral fibre board/tiles any size, fixed in ceiling at any height, flat or sloping, complete all as specified and directed.

M&L for point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through PVC conduit of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete one light point controlled by one 1 way switch, all as specified and as directed.

All as described in Sl item No. 46 but for one fan/exhaust fan point controlled by one switch and regulator.

All as described in Sl item No. 46 but for one 05 Amps socket outlet on independent board.

All as described in Sl item No. 46 but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

M&L for submain wiring comprising single core ,4 Runs of 6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings/existing concealed PVC conduit and conduit fittings not less than 25 mm dia complete, including provision of 2x6 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S&F modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor or eqvt as per site

S&F modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor or eqvt as per site

S&F modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor or eqvt as per site

S&F modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified . Make -Anchor or eqvt as per site.

S&F in repairs or replacement of ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.

S&F in repairs or replacement of LED lighting fixture with aluminium heat sink energy efficient 20 watt LED 6K fitting complete. Make Havells Cat No Lumiline plus or equivalent make specififed here-in-after.

S&F of Integral LED 70 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver incl GI pipe med grade & bracket of suitable size fixed to pole /wall complete all as directed . Make: Havells ENDURA Pearl OR equivalent make specififed here-in-after.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fix Recess mounting LED spot light 12 watt, 240 Volt, with high efficiency of 140 lm/W complete with electronic driver with all accessories internally prewired and necessary mounting arrangements, provision of new 3 core multi-stranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-charge. Model No - BRDCSL 30W NW/WH/WW of make - Bajaj or equivalent make specififed here-in-after.

S&F Electric Chimney Black wall mounted 1350 CMH auto clean suitable for 4-5 burners, instant auto clean with heat/water on button, shine finish, curved glass stail less steel body, touch control, speed level 3 having LED light 02 Nos, of single phase AC 220 Volt, 50 Hz of size not less than 88 cm x 48.6 cmx 51.5 cm (L x D x H) and provide demonstrate the functionality and safety measures complete all as specified and directed. Note: provide 2 years Warranty on product and 3 years on motor and PCB panels

Disconnection & taking down the unserviceable light fitting and S&F LED Bollard Decorative luminaire 8 W all as specified and as directed by engineer-in-charge. Make : Havells Cat Part No CONEBLS8WLED857PSYMTOPC or equivalent approved make specified here-in-after)

Supplying, laying, jointing and testing XLPE PVC insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 10 sqmm 2 core conforming to IS- 1554 laid in trenches/ ducts/ along poles/ through pipes including provision of cable gland/aluminium lugs complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work shall be measured & paid separately under appropriate item of this Schedule.

S&F of MCB SP 240 Volt of capacity 5 to 32 Amps ‘C’ series, complete all as specified and as directed.

M&L for electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etccomplete all as specified and as directed. Make: MONZA EC model of HAVELLS or equivalent approved make specified here-in-after.

S&F Single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 20 Amps 'C' curve type all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts and suitable for hot/ cold water supply with suitable length all as specified and directed.

RAMESH CONSTRUCTION COMPANY (BID ID -3462189)

famous construction (BID ID -3463012)

AMAR CONSTRUCTION (BID ID -3462206)

M/s.Santosh Kotarki (BID ID -3462076)

Satish Patpally (BID ID -3462199)

M/S RUDRAPPA CONSTRUCTIONS (BID ID -3462721)

SAYED MUSTAQ AHMED (BID ID -3462985)