8458/E8 SPECIAL REPAIR OF BLDG NO T-4 SUBHASH ROAD OF 25 UP BN NCC, PROVN OF SHEDT FOR UNIT GOVT VEHICLE AT T-3, SHED FOR AMUBULANCE PARKING AT SECTIONA HOSPITAL AND CAMOUFLAGE PAINTING AT SASF AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F of pressed steel frames for doors 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S & F of pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames.

S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts,urinal trough and funnels etc, cut to size,edge beaded if directed, holes punched , including round headed screw, clout nails or rivets and fixed to wood or steel members, etc, with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angle, stopped ends, outlet, etc, complete all as specified and directed.

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S & F of 25 mm thick veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work

S & F of 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

S & F of Stainless steel handles grade 304 decorative type 125 mm long for cup boards

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S& F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply only 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300mm long stainless steel grade 304 sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge as per specification & drawing complete all as specifed and directed.

S & F of 200 mm long stainless steel grade 302 barrel barrel tower bolts and fixed as specified and as directed.

S&F 100 mm long butt hinges, 2.00 mm thick (minimum) stainless steel grade 304 with SS hinge pin and fixed complete all as specified and directed.

S&F 150 mm stainless steel grade 302 handles 3.00 mm thick (minimum) complete all as specified and as directed.

M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation all as specified and directed.

M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth all as specified and as directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F curtain rod 25mm dia , mild steel, chormium plated/pvc coated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M & L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in colour cement over and including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for polished glazed vitrified tiles light shade 8-10 mm thick (square/rectanglar) polished area of each tiles exc 0.36 sqm but n.exc 0.72 Sqm in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of cement mortar in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified

M&L providing polished glazed vitrified tiles light shade 8-10 mm thick (square /rectanglar) polished area of each tiles exceeding 0.36 sqm to 0.72 Sqm in dado/ skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed.

M&L brushing neat cement slurry with 3.0Kg of cement per sqm and complete all as specified and as directed.

M&L for machine cut mirror polish kota stone slab flooring 18-20mm thich over and including 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for 18-20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc all as specified and directed.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:3 on concrete surfaces of ceiling all as specified and directed.

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified and directed.

M&L for two coat of (2 mm thick minimum) wall care cement wall putty on old/newly plastered of walls all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specfied and directed.

M&L for preparing old plastered surfaces of walls and applying two coat of cement base paint complete all as specfied and directed.

M&L for preparing plastered surfaces of ceiling and applying three coat of white wash complete all as specfied and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Sand filling under floors/ paver block or in foundation including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair vitreous china wash basin white, oval type size 550 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe or as on RCC shelves top all as specified and directed

S&F in repair only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.

S&F repair 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs bib taps 15mm bore chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd.

S&F in repair stop valve/angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half Stall type (back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe

S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60 gms) complete all as specified and direcetd.

S&F 450mm x 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified and directed.

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified and direceted.

S&F swivel shower rose dia 120 mm of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene multilayared water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as pacific SSR Part- I, including metalic cover (GI basin as cover) complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F 20 mm bore CPVC ball valve or gate valves, with CPVC/PTMT wheel head all as specified and directed.

S&F 20 mm bore float ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed.

Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore all as specified and directed.

Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore all as specified and directed.

S&F 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F reducing Tee/Elbow/Socket 20 x 16 mm dia with Female Brass Threaded Adaptor (FTA/FBTA) all as specified and directed.

Taking up or down existing asbestos cement pressure pipe any class, (including all fitting) including disconnecting pipes 75/110 and fittings complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints and solvent laid in trenches or in floors all as specified and directed.

S&F 75 mm bore PVC (SWR) bends and jointed with solvent all as specified and directed.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches and jointed with solvent all as specified and directed.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall and jointed with solvent all as specified and directed.

S&F of 110 mm PVC (SWR) bend any radius and jointed with solvent all as specified and directed.

S&F of 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door all and jointed with solvent as specified and directed.

S&F PVC 75/100 mm dia pipe with wall, stack clamps out of 25mmx3mm flat iron for fixing including securing ends of stays to ball or roof all as specified and directed.

S&F of 110 mm PVC (SWR) vent cowl any radius and jointed with solvent all as specified and directed.

Demolition of brick work in build in mud mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L brick work with sub class 'B' Bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class 'B' Bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges,roof covering/cladding to wall,fixed with self tapping screws as specified

M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A etc complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M & L of providing precast cement concrete type B-1 1:2:4 as in window or door cills, lintels, quoin blocks, copings. kneelers, apex stones, pier caps, columns, posts, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 with joints to match complete.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel bars 5 mm dia and over upto 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.

M & L for PCC type B-1 1:2:4 as in coping, roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete.

S & F 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid and aluminium snap grid frame work of grid size 605 x 605mm as in false ceiling all as specified. The main and cross tees (15mm x 15mm x 1.5mm, weighing @ 0.12 Kg/Rm) shall be jointed at junction/crossings with anodized aluminium angle brackets. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 40mm x 25mm x 2mm, weighing @ 0.36 Kg/Rm as indicated. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 4mm dia G.I. wire (upto 1200 mm in length) adjusting levels fixed to truss/purlin by ceiling cleats made of GI flat 40 x 3 mm size 60 mm long or J bolts with necessary bolts, nuts and washer complete.

Excavation in post holes each n.exc 0.5 cum getting out complete all as specified and as directed.

M&L for cement concrete in foundations, filling and mass concrete in cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) complete all as specified and as directed.

M&L for cement concrete in walls or retaining walls, any thickness, size or shape incl pilasters, butteresses columns, pillars, boundary pillars and posts (incl caps and bases) cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) complete all as specified and as directed.

M&L roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A and also dismantling etc complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

S&F in repairs pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges,roof covering/cladding to wall,fixed with self tapping screws as specified

M&L for formwork for columns etc, complete all as specified and directed

Surfaces excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil including filling depressions and cutting raised portions complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L broken stone or boulders hardcore of gauge n.exc 63mm of size, deposited, spread and levelled in layers n. Exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub floor, sub base of floor/hard standing/foot path complete all as specified and directed

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L precast cement concrete type B1 1:2:4 (20mm graded stone Aggr) in kerb stone of size 300x150x300 (LxWxD) and set in CM 1:6.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement

M&L for two coats of cement base paint in comouflage pattern incl preparation of new surface of wall complete all as specified and as directed. Note : Comaouflage pattern labour only will be paid under items no 122 below

M&L for preparing old decorated surfaces of wall and applying two coat of cement base paint in comouflage pattern on old surfaces of wall complete all as specified and as directed Note : Comaouflage pattern labour only will be paid under items no 122 below

Add extra for comouflage pattern to serial no 120 and 121 above

M & L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L applying one coat of synthetic enamel paints on old steel surfaces including surface preparation over 10 cm width and girth complete all as specified and directed.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB 100 Amps 4 pole 36 KA all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge.

M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed

Taking down carefully old unserviceable fittings & Fixers of any type and any size.

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity .

Taking down carefully old unserviceable sub main wiring of any size .

Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLSH cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :- NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc.

All as per Item No 139.00 One light point controlled by one switch

All as per Item No 139.00 One fan point controlled by one switch

All as per Item No 139.00 One exhaust fan point controlled by one switch

All as per Item No 139.00 One 3-pin socket outlet 5 Amp on independent board.

All as per Item No 139.00 One 3 pin socket outlet 5 Amp on same board

All per Srl item No. 139 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S &F switch piano flush type polycarbonate SP one way 6 Amps complete all as specified and directed

S &F switch piano flush type polycarbonate SP one way 16 Amps complete all as specified .

S&F socket out let 3 pin 6 amp multipurpose flash type.

S&F socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

Supply and fixing LED bulb 9 watt include connection all as specified. Make: C &S

M & L for replacement of Step regulator electronic modular fan regulator flush type on the existing phenolic laminated sheet etc as required complete & all as specified.

Taking down Exhaust fan of any size and deposited to E/M storeyard for refixing, complete all as specified

M&L old exhaust re-winding of cupper binding with capacitor complete and re-fixing all as specified with Engr-in-charge.

Taking down fan of any size, sealing cable end, dismantling blades and removing fan and blades to store.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Hanging only ceiling fan of Any size removed against item no 22 and connecting up with hook including provision of cable from ceiling rose or connector to fan.

M&L old ceiling fan re-winding of cupper binding with capacitor complete all as specified with Engr-in-charge.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

S&F box type LED light fitting suitable for 4 ft 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Taking down old unsv bldg security light fitting, Supply and fixing new LED bldg security light fitting 35 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion.

Supply and fix in replacement of 10sqmm 2core aluminium service cable for the building of DB all as specified and directed by Engr-in charge.

M/S CHAUHAN ELECTRIC WORKS (BID ID -3467651)

m/s udit constructions (BID ID -3468642)

M/S MANSI TRADERS (BID ID -3465342)

UTTRAKHAND BUILDERS (BID ID -3468602)

M/S SHAHABUDDIN AND SONS (BID ID -3463059)