Modification of High Mast and Floodlights at HAL Barrackpore.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Goods & Service Tax Registration No

Format of Undertaking

PAN No.:

Electrical Licence.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to e-procurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

Pls Enter Details of 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

40% (Three Works)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION :

Pls Accept The Declaration

DECLARATION II

Pls Accept the Delaration II

The Tenderer shall be deemed to have examined the Tender documents-PART A for Instruction to tenderers,General Condition of Contract,Special Conditions of Contract,Safety requirements,List of Approved make of Materials and Equipments before quoting .

Basic rate to be quoted for each item.Subject work is called on works contract basis and prevailing GST of 18 % has been added in the BOQ on overall total.

L1 will be determined including GST.

Disclosure of price in Technical bid or anywhere other than the price bid will be liable for rejection.

Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated by the system.The rate to be inserted should invariably correspond to the "UNITS" given under unit coloumn.

Description

Digging of concrete/hard/soft soil of approx. 75 cms depth below the ground for laying of FR PVC insulated copper wire & refilling of the excuvated area also making smooth finish with PCC to match the existing surface as per technical specification is included in the scope of work as per EIC instruction to be followed for work.

Supply and conceal fixing of Double door 8 way metallic Vertical MCCB DB for 125 Amps FP MCCB Incomer and TP/SP MCB Outgoing) 415 volts operation. For conceal fixing works like wall breaking, plastering, smooth finish etc. is included in the scope of work

Supplying and fixing of 63-100 A 4 pole MCCB rating and 16KA breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supply & fixing of 32A triple pole 415 Volt operation 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 10 A to 32 A rating, single pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply and Laying or fixing or passing through pipe, XLPE insulated armoured 1100V grade heavy duty electric cable with standard Aluminium Conductor 3.5 core 50 sqmm nominal cros section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc are included in the scope of work. Note: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.

Supply and laying or fixing , 1100 volts grade heavy duty cable with PVC insulated copper conductor served with an inner sheathing of PVC tape and overall PVC sheathed with stranded conductor 4 core 10 Sqmm nominal cross section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc, are included in the scope of work. Note: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.

Supply and laying or fixing , 1100 volts grade heavy duty cable with PVC insulated copper conductor served with an inner sheathing of PVC tape and overall PVC sheathed with stranded conductor 3 core 4.0 Sqmm nominal cross section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc, are included in the scope of work. Note: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.

Supply, Testing and fixing of 400 Watt floodlight with minimum 135 lumens/watt high power single die ceramic base LED and IP66 single piece die cast housing and high impact resistance(IK10 to equivalent) PC cover along with fixing accessories GI clamps, 3 core X 1.5 sq.mm PVC copper flexible cable from Loop box to luminairy, angle, nut, bolt etc necessary electrical connections with supply line is also included in the scope of work as per directon of EIC. The item should be standard manufactured and available in product catalogue. Before fixing quality, make & illumination of material will be checked/approved by EIC for acceptance. Note: Light fixing to be done above 12-14 Meter height & necessary arrangements will be contractor resposibility.

Supply, Testing and fixing of 400 Watt high mast/floodlight with minimum 120 lumens/watt high with option of multiple wattages in both wide and narrow beam options with PDC housing and high impact resistance(IK07 to equivalent) PC cover along with fixing accessories GI clamps, 3 core X 1.5 sq.mm PVC copper flexible cable from Loop box to luminairy, angle, nut, bolt etc necessary electrical connections with supply line is also included in the scope of work as per directon of EIC. The item should be standard manufactured and available in product catalogue. Before fixing quality, make & illumination of material will be checked/approved by EIC for acceptance. Note: Light fixing to be done above 12-14 Meter height & necessary arrangements will be contractor resposibility.

Repair/Servicing of flood light and make it functional with following: 1. Replacement of all defective spare parts. (Mechanical Part) 2. Greasing of SS wire rope, Motor & Gear Box. 3. Supply of new handle for manual operation of lighting channel. 4. Check/Repair & rectification for electrical operation of lighting channel. 5. Surface Preparation (removal of rust/old damage paint) & painting of 12-14 Mtr height angle/channel structure synthetic enamel paint with one coat primer & paint (2 Coats). 6. Repair & electrical connection of Aviation light. Rates inclusive of all mention works (Mechanical spares, Paint, Aviation light etc)

Indoor Terminal jointing of 3.5 core 50 sqmm PVC/A cable by compression type brass cable gland, lugs, crimping type sockets, tapes etc complete.

Taking down carefully 9 light arrangement (3 x3 nos.) each of HPMV metal hallide 400 Watt non-integral cast aluminium twin tubular luminaire complete & materials to store for keeping in safe custody for reuse as per directon of EIC.

Supplying, installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.

Supply, fixing/laying of 50 mm dia GI Pipe including trenching anf refilling etc as per directon of EIC.