REPAIR TO FURNITURE AT MD AND OTM ACCN AT DGRE RDC, MANALI

Amount

Repair & painting to ALMIRAH STEEL LARGE-Drg No-FD- 1032

Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as per drg and specified and directed..

M&L for welding to steel Almirah large where required not exceeding 2.5cm in length of all as per Drg and specified and directed.

Removing of old unserviceable /broken legs and S &F new legs out of 1.00 mm thick PBI Sheet complete all as shown on Drg and specified and directed.

Removing of old unserviceable locks and S&F new locks to steel Almirah large best quality (as per existing size) as approved by Engineer Incharge complete all as per Drg and specified and directed.

All as per Srl item No 1.4 above but CP Handle (as per existing size)

Removing of old unserviceable paints and repainting of steel Almirah large with two coat of synthetic enamel paint in side and out side including prep. of surfaces complete all as per Drg and specified and directed..

Repair to existing shelves i.e removing of dents etc and re fixing in position complete all as shown on drg and directed and specified..

Repair & painting to ALMIRAH STEEL MEDIUM- Drg No-FD-67(M), FD – 1032

Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as per drg and specified and directed..

M&L for Welding to steel Almirah where reqd n.exc . 2.5 cm in length complete all as per Drg and specified and directed.

Removing of old unserviceable /broken legs and S &F new legs out of 1.00 mm thick PBI Sheet complete all as shown on Drg and specified and directed.

Removing of old unserviceable locks and S&F new locks to steel Almirah best quality (as per existing size) as approved by Engineer Incharge complete all as per Drg and specified and directed..

All as per Srl item No 2.4 above but CP Handle

Removing of old unserviceable paints and repainting of steel Almirah medium with two coat of synthetic enamel paint in side and out side including preparation of surfaces complete all as per Drg and specified and directed.

Repair to existing shelves removing of dents etc and re fixing in position complete all as shown on Drg and specified and directed.

Repair & painting to BOOK CASE STEELFD- 90, FD- 1028.

Removing of old unserviceable Broken glass of shutter and S&F of new glass 5mm thick as per existing size fixing to the shutter of book case complete all as per Drg and specified and directed.

Removing of old unserviceable lock and S&F of new locks in book case all are operated by one key only complete all as shown Drg and directed and specified.

Removing of old unserviceable bow handle of the shutter and S&F new CP bow handle of same size complete as per Drg and specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying two coats of synthetic enamel paint OG complete all as specified drg, as directed.

Repair to Chair varandah Drg No-FD-256

Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed (Painting to chair will be carried out before recanning)

S&F hard rubber shoes suitable for chair Varandah complete, all as specified and directed.

M&L for welding to Chair Varandah where required n.exc 2.5cm in length complete all as specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying white synthetic enamel paint to Chair Varandah complete all as specified and directed

Repair to Chair Easy, Drg No FD-202 & FD-250

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, as specified and directed

All as per Srl item No 5.1 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning.

All as per Srl item No 5.1 above but back bottom size- 480 x20 x100mm.

All as per Srl item No 5.1 here-in-before but stiffener of sizes 50 x 25 x 500mm.

All as per Srl item No 5.1 here-in-before but arms of size as shown on drg.

M&L for Polishing to chair easy complete all as per drg, as specified and as directed.

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

Repair to Charpoy GI pipe top plywood Drg NO-FD-220

Removing of old unserviceable plywood sheet., tightening of loose check nuts,elbows, rails legs etc i.e tightening of complete charpoy and S&F of plywood of size 2000mmx900mmx12mm thick BWR and 2 Nos of MS flat 40mm x4mm x 900mm long to be welded at different points of the charpoy, 14 Nos nuts bolts (GI) 75mm long 6mm dia with washer after making in the pipe at different points complete all as specified and directed

Dismantling of old broken threaded long rail and S&F new long rail of GI tubing 32 mm bore medium grade 1900 mm long duly threaded at both ends and fixing in position complete all as per drg and as specified and as directed .

Removing of old unserviceable short rail and provn of short rails ( Long rail obtained from Srl item 6.2 shall be modified into 2 pieces of short rail by cutting threading etc)and fixing in position complete all as shown on drg and as specified and as directed

Removing of old unserviceable legs and provn of legs (short rail obtained from Srl item 6.3 shall be modified into 2 pieces of legs by cutting threading etc) including 2 Nos clamps for MNF set made cut out of flat iron 25x3mm and welding to the legs and Provn of base plate 3mm thick 50mm dia welded to bottom of leg complete all as shown on drg and specified .

Removing of old unserviceable 32 mm dia GI elbow and S&F new 32 mm bore GI elbow 3 way Med gde of best quality as shown on drg complete all as specified and directed

Removing of old unserviceable 32 mm dia GI check nuts and S&F new check nuts 6 mm thick suitable for 32mm bore GI tubing med grade of best quality as shown on drg complete all as specified and directed

S&F 32mm plug for legs of charpoy complete all as specified and directed

Repair to chair tubular with / Wo arms

Welding to tubular frame chair to bring in its proper shape.

S&F in replacement seat and back made of hard wood and canning with plastic cane white ,2mm wide with border of 3 mm in Godrej pattern.

S&F mild steel flat iron 15 x 3x500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded complete all as specified directed.

S&F in replacement wooden handle fixed in position with screws .

M&L for painting to steel frame with synthetic enamel paint one coat.

Repair to Sofa Set 5 Seater :- TP

S&F in replacement of sheet back 50mm, seat & arms 20mm thick of 32 density foam ( Make:Godrej/Sleep well/coir foam ) ,covered velvet cloth not less Rs.350 per mtr as per sample approved by EIC.relacement of cotton teas ,linning cloth ,haison cloth,cotton dory.

French polishing to all exposed wooden surfaces complete all as specified.

Replacement of leg with shesham wood leg of appropriate size

S&F in replacement copper coated spring 6" high quality

S&F in replacement copper coated spring 4" high quality

S&F in replacement 100 mm thick cushion seat (size 21"X22") of 32 density foam ( Make:Godrej/Sleep well ) covered velvet cloth not less Rs.350 per mtr as per sample approved by EIC

Repair to CHAIR DINING TP

S&F in Replacement of legs with sheasham wood leg as per specified and as directed .

S&F in Replacement of 50mm thick cushion seat of size 18"x18" of 32 density ( Make:Godrej/Sleep well, coirfoam), covered with good quality tapestry Cloth not less than Rs 350/- mtr as per sample approved by EIC.

S&F in Replacement of 20 mm thick cushion back of size 9"x14" of 32 density foam ( Make:Godrej/Sleep well, coirfoam), covered with good quality tapestry cloth not less than Rs.350/-mtr as per sample approved by EIC.

French polishing to all exposed wooden surface.

Repair to CHAIR WRITING FD-20,FD-202 & FD-250

Replacement of old unserviceable front leg by providing well seasoned Shisham wood free from shake and knots complete all as per drg, as specified and as directed.

All as per Srl item No 10.1 above but rear leg.

All as per Srl item No 10.1 above but side/front/rear rail of cane seat including making 3mm dia holes for re-canning

All as per Srl item No 10.1 about but back bottom of size 45 x15 x 400 mm

All as per Srl item No 10.1 here-in-before but stiffeners of size 25 x19 x 500mm.

All as per Srl item No 10.1 here-in-before but arms.

M & L for polishing of chair writing complete all as per drg, as specified and directed.

(h) Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

Repair & painting toTABLE OFFICERS STEEL .FD-84, FD-1003

Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg as Specified and as directed..

Repair to drawer i.e removing of dents and fixing in position complete all as shown on drg, specified and directed.

Removing of old U/S locks of table offrs steel and S&F new locks of best quality (as per existing size) as approved by engineer incharge complete all as specified and directed.

Removing of existing drawer of table and S&F new drawers made of 1.00 mm thick PBI sheet of suitable size complete all as shown on drg and directed and specified..

M&L for painting of one coat of synthetic enamel paint to table Officers steel in side and out side including preparation of old painted surface with wire brush, emery paper etc complete all as specified and directed.

Removing of existing rails and S&F new rails made of 1mm thick PBI sheet and bent into shape for sliding to drawer of table officers steel complete all as shown on Drg and as specified and directed.

M&L for welding to frame where reqd in points not exc 2.5 cm in length complete all as shown on Drg, specified and directed.

All as per Srl item No 11.2 above but shutter of table officers steel.

Repair & painting to TABLE CLK STEEL FD-84, FD-1003

Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg as Specified and as directed..

Repair to drawer i.e removing of dents and fixing in position complete all as shown on drg, specified and directed.

Removing of old U/S locks of table offrs steel and S&F new locks of best quality (as per existing size) as approved by GE complete all as specified and directed.

Removing of existing drawer of table and S&F new drawers made of 1.00 mm thick PBI sheet of suitable size complete all as shown on drg and directed and specified..

M&L for painting of one coat of synthetic enamel paint to table Officers steel in side and out side including preparation of old painted surface with wire brush, emery paper etc complete all as specified and directed.

Removing of existing rails and S&F new rails made of 1mm thick PBI sheet and bent into shape for sliding to drawer of table officers steel complete all as shown on Drg and as specified and directed.

M&L for welding to frame where reqd in points not exc 2.5 cm in length complete all as shown on Drg, specified and directed.

Repair to BED PLYWOOD TOP/BED NEWAR FD-245 FD-246,FD-247

Removing of old unserviceable head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood and polishing complete all as specified as shown on drg and as directed .

All as per Srl item No 13.1 above but foot board complete

Removing of old unserviceable long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and as specified and as directed

Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial with ( ISI Markeds) crews complete all as directed as shown on drg and as specified

Removing of unserviceable stiffeners of chair wood (natural seasoned) of suitable size of making necessary grooves in long rail complete all as shown on drg as directed and as specified

S&F in replacement MS clamps of size 40mm width x4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/foot board with long rails complete all as specified and as directed

Repair to Chair Dining -FD- 279

Removing of old unserviceable front leg replacing by new Shisham wood leg of 46 cm length, 45 x 45mm on top and 25 x 25mm at bottom with fine finish as per drg, as specified and as directed.

All as per Srl item No 14.1 above but rear leg 890 mm length, 25x25mm at bottom and 20 x 20 mm at top.

All as per Srl item No 14.1 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning

All as per Srl item No 14.1 here-in-before but back bottom of size 45x19x440 mm.

All as per Srl item No 14.1 here-in-before but stiffener of size 45x19x215mm.

M&L for Polishing of chair dinning complete all as per drg, as specified and directed..

Recanning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

REPAIR & BOOK CASE WOODEN

Removing of old UNSV/broken legs and S&F new legs of shisham wood (free from shake and knots size) complete all as per drg directed and specified

Removing of old UNSV/broken shutter and S&F new shutter of 18mm thick block board commercial type fitted with piano type hinges complete all as shown on drg and specified and directed.

S&F fancy aluminium anodized knob 25mm size of best approved quality complete all as shown on drg and specified and directed.

Removing of old UNSV Shelves and S&F new shelves complete all as shown on drg and specified, and directed..

Replacing of old unserviceable back and Sides S&F new back and sides made out of 18mm thick plywood commercial type complete all as shown on drg and specified and directed..

M&L for polishing to Book Case complete all as shown on drg and specified

Repair & Polishing to Table dining TP

Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging around complete all as shown on drg as Specified and as directed.

Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, as specified and as directed.

All as per Srl item No 16.2 above but top long rail.

All as per Srl item No 16.2 above but top short rail.

M&L for Polishing to table dining complete all as specified, as directed.

Repair & Polishing to Table 900 x 600 x760 mm with and without drawers Drg No-FD-41,55,223,224

Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg as Specified and as directed.

Replacement of old unserviceable leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, as specified and as directed.

All as per Srl item No 17.1 above but top long rail.

All as per Srl item No 17.1 above but top short rail.

All as per Srl item No 17.1 above but stiffener.

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick block board at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing.

M&L for Polishing to table 900X 600X760mm without or with drawer complete all as specified, as directed and as shown on drawing.

Repair and polishing to Teapoy FD-34,FD-232, & FD-292,278

Replacement of old unserviceable top by providing new top of 18/19mm thick block board commercial type pasted with laminated sheet 1mm thick teak faced including 3mm thick teak wood edging all-round complete all as per and as directed

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified.

All as per Srl item No 18.1 above but long rail.

All as per Srl item No 18.1 above but short rail.

All as per Srl item No 18.1 above but stiffener .

M&L for Polishing to table Teapoy complete all as shown on drg, as Specified and as directed

Repair to Chair Computer/ (Revolving)/Study Chair Drg No- TP

S&F in replacement high quality PVC chair wheel.

S&F in replacement 50 mm thick cushion seat and back 32 density foam and cover with approved quality cloth.

S&F in replacement wheel stand including wheels complete all as per directed

M&L for spray with two coat of synthetic enamel paint ete completed all as directed.

vivek and co

NATHU RAM AND SONS

Kanishka Engineers

KULBHUSHAN AGGARWAL

kewal builders

M/S RUDHRAKSH TRADING CO

M/s SODHI SALES CORPORATION