Electrical installation work through surface wiring including supply and fixture of luminaries, fans etc. along with supply and fixture of LAN line, Distribution Box etc. of newly constructed Paschim Bardhaman Regional Office at Kalyanpur Housing Est

Amount

S & F 8 way double door VTPN DB in CRCA sheet steel enclosure (Make-Legrand-6079 14) for FP MCCB incomer and SP/ TP MCBs as outgoing, IP-43 protection fied on wall & s & f the following rating of MCCB and MCB’s incl. inter connection with suitable size of copper wire, neutral link & provision for earthing attachment as to G.S. Incoming - 415 V 100Amp 36 KA FP MCCB (Make - Legrand / Siemens/Hager ) -1 No. Outgoing - a)415 V 50HZ C-Curve 63 Amp TP MCB (Make - Legrand / / Siemens/Hager ), ---- 7Nos. b) 240 V 10 KA 63 Amp DPMCB(Make - Legrand / / Siemens /Hager ) - 3 Nos.

Supplying and fixing 415 V, 16-32A per way, TPN MCBDB with SS enclosure double-door with IP-42/43 protection with Four Pole Isolators as incomer and SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (make-Legrand/Siemens/Hager) as to GS. 6way, 63A FP isolator, & 12 nos. SPMCB (similar to Legrand, cat no. 607715/siemens/Hager)

Supplying and fixing 250 V, 6-10A per way, SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (make-Legrand/Siemens/Hager) as to GS (2+10) way, 40A DP Isolator 1 no, 10 nos. SPMCB

Supplying & laying of 1.1 KV. Gr. armored XLPE Al. LT cable (Make : Polycab/Havells/CCI/Crystal) of following rating on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting for connection from meter loop to LT main panel, from LT panel to VTPN as reqd. complete with necessary gland and terminator as per GS.

a)4corex25sq.mm

b)4corex50sq.mm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry with end finishing by socketing as to GS of XLPE armoured cables

a) 4corex25sq.mm

b) 4corex50sq.mm

S&F of 14w LED Lamp fixing on existion batten holder (Make Philips)

S/F of single/twin 18 watt LED fittings directly on wall with 2nos HW block supports fixed with with the suitable size of fastner & nuts & bolt as per GS,with S/F suitable length of 2x1.5.sq. mm. copper wire,with painting –

a) Single fittings with 1no LED Lamp (Philips, Cat no-TMC 501 1xLED 18w/ Crompton cat no- IGP131LT8-16)

b) double fittings with 1no LED Lamp (Philips, Cat no-TMC 501 2xLED 18w/ Crompton cat no- IGP131LT8-16)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single corestranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar earthingattachment fixed on wall incl. mending good damages to oreiginal finish.a)Average run 9 mtr(E-24 -1(d)

S & F GI Modular switch board of the following sizes complete with three No. suitable size copper bar with holes (For Ph, N & E) fixed on bakelite/hard rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment , painting and mending good damages to building works (E-17 1/a) +3 a + 4a

S &F 2'x2'ft square light fittings -VENUS NEO 18/42 watt with driver (Make-Havells)

Distribution wiring with 1.1KV grade single core stranded copper conductor PVC insulated and unsheathed copper wire (Make--Finolex/Polycab/KEI/Currency) in 19/25 mm dia 3mm thick PVC rigid pipe complete with all accessories etc. on wall ( for TPNDB to SPNDB ,to AC point and separate 15A power point

2x6 sqmm+ 2X2.5 sqmm

2x4sq.mm+1x2.5sq.mm

2x2.5 sqmm+ 1X1.5 sqmm

S & F of ceiling fans (make- / Usha-striker plus/Crompton arura). of following dimensions.(5 star) 48"

S & F 240V ,100W step type Electronic modular fan regulator(make:Legrand Myrious)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

S&F 16" sweep bracket fan (Make-Havells/Crompton Greeves)fixed on wall.

S& F 32 Amp Industrial plug socket with necy. Connectoin

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. with3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [ E-17/5.(a)]

S&F 250 volt of moduler type (12 module) plug socket computer board(6890 11) of comprising of lowing accessories.(make Legrand/simens) a)6/16A switch &socket---1 Set b)6A,-------do------------(--do--)-----2Sets c)Indicator------------------------------------1Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall.

S/F of 6 Modular switch board with S/F 250V 5 pin 1 no 15A & 1no 5A Modular type plug socket/switches (Moduler Crabtree) including necessary inter-connection & earthing attachment as per direction of E.I.C. (for power point) F-17-4(b), F-17-1(b),F-17-3(a),F-17-4(a),F-17-3(b)

S/F following size of exhaust fan after making holes in wall with louver shutter & making good damages & smooth cement finish etc. as practicable as possible & providing necy. Length of PVC insulated flexible copper wire for connection(Make EPC/CROMPTON) for 230mm (9") Exhaust fan

Supply & installation of angle frame mounting rectangular shape Glow Sign board size of 13ft x4ft x 10" depth made of 25mm x 25mm x 4mm MS ftat & 1" x 1" square bar combination skeleton structure is to be covered by 2mm poly-carbonate vinyle facia with opted (computerized) matter as per following manner. Finally the board will be grouted on angle structure of size 40 x40x5 mm MS by welding & necessary fabrication job. The front portion of the board is to be open by hinged ( Kabja) system for maintenance of Electrical works. The illumination of the sign board is to be done by S&F 16 nos Fluorescent tube light of 36W 4ft (Philips cat no Tarang Electronic TMC090 HF) fittings along with S&F 15A piano key type control switch with MS box & Bakelite top cover & to be connected by S&F of suitable length of 3x1.5 sq mm copper wire in PVC rigid conduit as per direction of E.I.C. (13sq.ftx4sq.ft)=52sq.ft x1setss( WEST BENGAL STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED /OFFICE OF THE REGIONAL MANAGER/PACHIM BURDWAN REGION/ASANSOL )for displaing as above

S/F lan line by cat 6' d link wire in PVC rigid conduit with RJ 45 male female socket and necy. Connection

S/F D link I.O box with neccy.connection

S&FDistribution Board-36 port(Make-D link) router with neccy carrier box.l

M/S GRACIOUS ENGINEERING PROJECT

DELTA BROTHERS

BENGAL ELECTRICAL CONSTRUCTION