Karnataka

To Be Opened

Works

Buildings

CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

Public Works Department

PWD Division Office Mandya | Mandya, Karnataka

Amount: ₹2.0 CrCloses: 18 Jul 2026Closed

Timeline

Published9 Jul 2026
Pre-Bid Meeting14 Jul 2026
Closed18 Jul 2026
Bid Opening20 Jul 2026

Tender Value

₹2.0 Cr

EMD Value

₹3.0 L

Closing Date

18 Jul 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Shubha T S

Office Number

Work Description

CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT37144

Reference Number

PWD/2026-27/BD/WORK_INDENT37144

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mandya

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredPWD Contractor Registration Certificate

RequiredTurn over and Profit & Loss Statement certified by Registered Chartered Accountant with UDIN

RequiredWork done certificate Experience in one similar type of work

RequiredLine of credit / K-Form

RequiredOngoing work details

RequiredDetails of tenders already submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender processing fee shall not be refundable

The employer is not responsible for any delay in accessing E - Procurement Portal.

Contractors should be registered with KPWD Class II and Above Registration

Royalty on construction materials will be deducted as per prevailing Govt. orders

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 K.P.W.D. and further orders there on

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 & 29.1 of ITT and Clause 44 of the Conditions of Contract

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project.

Contractor should adhere to HSE policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Mandya during office hours on all working days

Materials like bitumen, steel, cement etc., required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conyence of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in - charge of this work

Contractor should follow strictly the prevailing rules of labour act

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

The tenderer who quotes amount less than amount put to tender should pay difference amount in the form of FDR purchased through any nationalized bank payable at Mandya only in favor The Executive Engineer at the time of execution of the tender agreement

One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1. Bank Guarantee/e-Bank Guarantee as per circular of Finance department GOK letter no:FD 5 EXP 12/2023 Dt:15.05.2023 must be given for the remaining amount in prescribed format. The copy of the Bank Guarantee must be scanned and submitted along with the Technical bid

Note:- If any postponement of receipt date of tender, the same will be published in the e-procurement portal

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works

LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection

The returns submitted to the Income Tax Department. shall be uploaded or shall be produced at the time of verification of original documents at Division office

Regarding Appealing Aggrieved contractors may appeal to the prescribed (Appellant) authority within 30 days as per KTTP and appeal should be through e-proc only as per Govt.order No:pwd/445/CRN-2024(E) Bangalore DT.14-08-2024. Same will not be considered if appeal through Letters

Period for completion for the work is 6 months (including Rainy season)

GST at 18Percent shall be paid to the tendered amount separately

GST shall not be paid in the extended period of contract for which the contractor alone is responsible for the delay as determined by the authority while granting the extension of time.

Turn over and Profit and loss statement without UDIN Number will be rejected

B-Value of existing commitment details should be submitted. Else the ongoing works available in the e-portal will be considered as a whole.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 (b) Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar nature of work such as Construction of Building work of value not less than Rs.100.59 Lakhs.

Work Done Certificate

3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-2026 (c) Executed in any one year, the following minimum quantities of work: 1 All types of Masonry:453.00 Cum. 2 Cement Concrete(RCC/PCC) : 568.00 Cum 3 Reinforcement Steel :30.10 Tonne. 4 Flooring (All type of flooring) : 137 .00 Sqm.5. Painting : 1964 .00 Sqm 6.Plastering: 1324.00Sqm

Work Done Certificate

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs.9.43Lakhs (in any one year) along with Electrical License/Registration copy.

Work Done Certificate

Capabilities of Vendor

3.6 - Tenderers who meet the above minimum qualifying criteria, will only be qualified of their available tender capacity is more than the total tender value. The available tender capacity is calculated as under Assessed available tender capacity ( AxNx1.50 - B ) where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which Tenders are invited. (N 0.50) B Value, at 2026-27 price level, of existing commitments and on-going works to be completed. during the next 6 months.

Others -- Work done & balance work to be done certificate issued by an officer not below rank of EE/equivalent

Financial Status

3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction works only of Rs.402.36 Lakhs. (usually not less than two times the estimated annual payments under this contract). With UDIN

Audited CA Certificate of Annual Turnover

3.3 - Each Tenderer should further demonstrate : (b) Liquid assets and / or availability of credit facilities of not less than Rs.100.59Lakhs. (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.)

Line of Credit

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹3.0 L

Important Dates

Last Activity

9 Jul 2026

Published

9 Jul 2026

Bid Opening

20 Jul 2026

Download Ends

17 Jul 2026

Pre-Bid Meeting

14 Jul 2026

BOQ Preview

•

CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- All the items in the tender include all lead, lifts, loadi...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- All the items in the tender include all lead, lift...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Tile brick masonry with common burnt clay Non Modular tile bricks of class designation 5.0 conforming to IS 2690 (Part I) in superstructure above plinth level up to...

•

Providing Flush/ Ruled/ Struck or weathered pointing: Pointing on tile brickwork with cement mortar 1:3(1 cement:3 fine sand) after raking joints to depth nicely lining, including cost of materials,...

•

Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cem...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

•

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. ---- All the items in the tender include all lead, lifts, loading unloading, transport...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm ---- All the items in the tender include all lead, lifts, loading unloading...

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete : ---- All the items in the tender include all lead, lifts, loading unloading...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard d...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- All the items in the tender include all lead, lifts, loadi...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 32 mm dia ---- All the items in the tender include all lead, lifts, loading unlo...

•

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- All the ite...

•

Providing and fixing PTMT urinal cock of approved quality and colour using 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 g. ---- All the it...

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- All the items in the tender include all lead...

•

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- All the items in the t...

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Premium ---- All the items in the tender inc...

•

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with ...

•

ELECTRIFICATION FOR CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

•

Supplying heavy gauge PVC conduit pipe . mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The con...

•

Supplying heavy gauge PVC Conduit Pipe . dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by Groove cutting in the wall and fixing by bracing U or J hooks and cement pl...

•

Supplying and fixing PVC/metal conduit Deep junction box (a ) 19/20 mm deep Junction box ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charg...

•

Supplying and fixing PVC/metal conduit Deep junction box (b ) 25 mm deep Junction box ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges ...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing -upto wall surface complete.upto 50 mm conduit in brick wall ---- All ...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete w...

•

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi- compartment raceways), zero spangle pre-galvanized sheet steel with ...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathedsuitable for worki...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(a ) 6A One Way Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.6...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(b) 6A Two Way Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.6....

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(c ) 6A Three Way socket ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(d ) Stepped Fan Regulator Two Module ( As Per SR 2023-24 Volume -6 PWD Elect...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(e ) 600W Dimmer ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.6.6 Pag...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(f) 16A One Way Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.6...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(g ) 6A Bell Push ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.6.8 Pa...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(h ) 32A DP Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:33.6.9 ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(i) 6/16A Universal Socket ( As Per SR 2023-24 Volume -6 PWD Electrical SL No...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(j) TV/Telephone Socket ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3....

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(k ) RJ45/I.O Outlet Cat-6 ( As Per SR 2023-24 Volume -6 PWD Electrical SL No...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(a ) 6A Three Pin Top ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.4 Page No 9) ---- All the items...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(b) 6A Bakelite Ceiling Rose ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.5 Page No 9) ---- All th...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(c ) 6A Batten Holder ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.7 Page No 9) ---- All the items...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(d ) 6A Bell Buzzer ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.9 Page No 9) ---- All the items i...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(e) 16/6A combined plug and socket with control switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.1...

•

Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...

•

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

•

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

•

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.(a ) 32A ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.5.1 Page No...

•

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.(b ) 63A ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.5.2 Page No...

•

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.(c ) 100A ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.5.3 Page N...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 200A ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.7.5 Page No 13) --...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)(a ) 100 A ( As Per SR 2023-24 Volume -6 PWD Electrical...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)(b ) 125 A ( As Per SR 2023-24 Volume -6 PWD Electrical...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)(c ) 200 A ( As Per SR 2023-24 Volume -6 PWD Electrical...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)(d ) 250 A ( As Per SR 2023-24 Volume -6 PWD Electrical...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)(e ) 400 A ( As Per SR 2023-24 Volume -6 PWD Electrical...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing of Shunt trip suitable for MCCB.CBCT ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.16 Page No 16) ---- All the items in the tender include all lead, lifts, loading unloadin...

•

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.22 Page No 17) ---- All the items in the tender include a...

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.27 Page No 17)

•

---- All the items in the tender include all lead, lifts, ...

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.28 Page No 18)

•

---- All the items in the tender include all lead, lifts...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

•

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.36 Page No 18)

•

---- All the items in the tender include al...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.38 Page No 18)

•

Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 50...

•

Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wit...

•

Supply and fixing of Multifunctional three phase monitoring relays suitable to monitor three phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as ...

•

Rotary handle for MCCB ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.55 Page No 21 )

•

---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire c...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm) ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:6.2.1 Page No...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

•

Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.300 mm Sweep ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 6.5.1 Page No 29 ) ---- All the items in the tender inc...

•

Supplying of . capacity window type air conditioner confirming to IS specification suitable for operation on 230 V, 50 Hz single phase, AC. supply with all accessories.(a) 1.5 Ton capacity 5 Star ( As...

•

Supplying of . capacity window type air conditioner confirming to IS specification suitable for operation on 230 V, 50 Hz single phase, AC. supply with all accessories.(b ) 2 ton capacity 5 Star ( As ...

•

Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of suitable size & allied works complete. ( As Per SR 2023-24 Volume -6 PWD Electrical SL ...

•

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil & gas c...

•

Supplying and drawing UTP-CAT 6E LAN cable. ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.1 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transportat...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.(a ) 8U with 650mm depth ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.4.5 Page No 35)

•

---- All the items in the t...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.(b ) 24U with 650mm depth ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.4.6 Page No 35)

•

---- All the items in the ...

•

Supplying & Fixing of Power strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.5 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transportation, labou...

•

Supplying & fixing of Castor wheels to the Shelf ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.7 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transp...

•

Supplying fixing of Network Switches ( a ) 48 Port Gigabyte (manageable) ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.1 Page No 35)

•

---- All the items in the tender include all lead, lifts,...

•

Supplying fixing of Network Switches ( b ) 24 Port Gigabyte (manageable) ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.2 Page No 35)

•

---- All the items in the tender include all lead, lifts,...

•

Supplying fixing of Network Switches ( c ) 48 port 10/100 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No8.9.4 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading ...

•

Supplying fixing of Network Switches ( d ) 24 port 10/100 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.5 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading...

•

Supplying fixing of Network Switches ( e ) 48 port 10/100/1000 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.9 Page No 35)

•

---- All the items in the tender include all lead, lifts, lo...

•

Supplying fixing of Network Switches ( f ) 24 port 10/100/1000 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No8.9.10 Page No 35)

•

---- All the items in the tender include all lead, lifts, lo...

•

Supplying & fixing of I/O socket with back box(a ) Single I/O ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.10.1 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading u...

•

Supplying & fixing of I/O socket with back box(b) Double I/O ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.10.2 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading un...

•

Supplying & Fixing of . ms Cat 6 Patch Cable(a ) 2 m ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.11.2 Page No 36)

•

---- All the items in the tender include all lead, lifts, loading unloading,...

•

Supplying & Fixing of . ms Cat 6 Patch Cable(b) 3 m ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.11.3 Page No 36)

•

---- All the items in the tender include all lead, lifts, loading unloading, ...

•

Supplying & Fixing of Patch panel for LAN cabling(a ) 48 Port 10/100 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.1 Page No 36)

•

---- All the items in the tender include all lea...

•

Supplying & Fixing of Patch panel for LAN cabling(b ) 48 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.4 Page No 36)

•

---- All the items in the tender include al...

•

Supplying & Fixing of Patch panel for LAN cabling(c) 24 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.5 Page No 36)

•

---- All the items in the tender include all...

•

Supplying & Fixing of Patch panel for LAN cabling(d) 16 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.6 Page No 36)

•

---- All the items in the tender include all...

•

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.20 Pair -( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.13.2 Page No 36)

•

---- All the items in the...

•

Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.(a ) 120 AH capacity ( As Per SR 2023-24 Volume -...

•

Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.(b ) 150 AH capacity ( As Per SR 2023-24 Volume -...

•

Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.(c ) 200 AH capacity ( As Per SR 2023-24 Volume -...

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(a ) 25 x 3 mm GI strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.2 Page No 53)

•

---- All the it...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(b) 600 x 600 x 3 mm GI Plate ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.6 Page No 53)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(c ) 25 x 3 mm Copper strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.7 Page No 53)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(d ) 600 x 600 x 3 mm Copper plate ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.11 Page No 53)

•

2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.300 x 50 mm ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12....

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

•

Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, C...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. . Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & an...

•

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. (As Per SR 2023-24 Volume -6 PWD Electrical SL No 11.1...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- All the items in the tender include all lead, lifts, loadi...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- All the items in the tender include all lead, lift...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Tile brick masonry with common burnt clay Non Modular tile bricks of class designation 5.0 conforming to IS 2690 (Part I) in superstructure above plinth level up to...

•

Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cem...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm ---- All the items in the tender include all lead, lifts, loading unloading...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard d...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- All the items in the tender include all lead, lifts, loadi...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Flexible pipe : 32 mm dia ---- All the items in the tender include all lead, lifts, loading unlo...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(a ) 6A Three Pin Top ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.4 Page No 9) ---- All the items...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(b) 6A Bakelite Ceiling Rose ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.5 Page No 9) ---- All th...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(c ) 6A Batten Holder ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.7 Page No 9) ---- All the items...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(d ) 6A Bell Buzzer ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.14.9 Page No 9) ---- All the items i...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(e) 16/6A combined plug and socket with control switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:3.1...

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.27 Page No 17)

•

---- All the items in the tender include all lead, lifts, ...

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.28 Page No 18)

•

---- All the items in the tender include all lead, lifts...

•

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.36 Page No 18)

•

---- All the items in the tender include al...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.38 Page No 18)

•

Rotary handle for MCCB ( As Per SR 2023-24 Volume -6 PWD Electrical SL No:5.55 Page No 21 )

•

---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire c...

•

Supplying and drawing UTP-CAT 6E LAN cable. ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.1 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transportat...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.(a ) 8U with 650mm depth ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.4.5 Page No 35)

•

---- All the items in the t...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.(b ) 24U with 650mm depth ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.4.6 Page No 35)

•

---- All the items in the ...

•

Supplying & Fixing of Power strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.5 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transportation, labou...

•

Supplying & fixing of Castor wheels to the Shelf ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.7 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading unloading, transp...

•

Supplying fixing of Network Switches ( a ) 48 Port Gigabyte (manageable) ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.1 Page No 35)

•

---- All the items in the tender include all lead, lifts,...

•

Supplying fixing of Network Switches ( b ) 24 Port Gigabyte (manageable) ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.2 Page No 35)

•

---- All the items in the tender include all lead, lifts,...

•

Supplying fixing of Network Switches ( c ) 48 port 10/100 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No8.9.4 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading ...

•

Supplying fixing of Network Switches ( d ) 24 port 10/100 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.5 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading...

•

Supplying fixing of Network Switches ( e ) 48 port 10/100/1000 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.9.9 Page No 35)

•

---- All the items in the tender include all lead, lifts, lo...

•

Supplying fixing of Network Switches ( f ) 24 port 10/100/1000 Switch ( As Per SR 2023-24 Volume -6 PWD Electrical SL No8.9.10 Page No 35)

•

---- All the items in the tender include all lead, lifts, lo...

•

Supplying & fixing of I/O socket with back box(a ) Single I/O ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.10.1 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading u...

•

Supplying & fixing of I/O socket with back box(b) Double I/O ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.10.2 Page No 35)

•

---- All the items in the tender include all lead, lifts, loading un...

•

Supplying & Fixing of . ms Cat 6 Patch Cable(a ) 2 m ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.11.2 Page No 36)

•

---- All the items in the tender include all lead, lifts, loading unloading,...

•

Supplying & Fixing of . ms Cat 6 Patch Cable(b) 3 m ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.11.3 Page No 36)

•

---- All the items in the tender include all lead, lifts, loading unloading, ...

•

Supplying & Fixing of Patch panel for LAN cabling(a ) 48 Port 10/100 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.1 Page No 36)

•

---- All the items in the tender include all lea...

•

Supplying & Fixing of Patch panel for LAN cabling(b ) 48 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.4 Page No 36)

•

---- All the items in the tender include al...

•

Supplying & Fixing of Patch panel for LAN cabling(c) 24 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.5 Page No 36)

•

---- All the items in the tender include all...

•

Supplying & Fixing of Patch panel for LAN cabling(d) 16 Port 10/100/1000 patch panel ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.12.6 Page No 36)

•

---- All the items in the tender include all...

•

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.20 Pair -( As Per SR 2023-24 Volume -6 PWD Electrical SL No 8.13.2 Page No 36)

•

---- All the items in the...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(a ) 25 x 3 mm GI strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.2 Page No 53)

•

---- All the it...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(b) 600 x 600 x 3 mm GI Plate ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.6 Page No 53)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(c ) 25 x 3 mm Copper strip ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.7 Page No 53)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.(d ) 600 x 600 x 3 mm Copper plate ( As Per SR 2023-24 Volume -6 PWD Electrical SL No 12.58.11 Page No 53)

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw4_bid_documents-2026-27-37144.docx

Tender Document • 1.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Buildings

CONSTRUCTION OF SCHOOL BUILDING IN BEERASHETTHALLI VILLAGE, PANDAVAPURA TOWN, MANDYA DISTRICT(PHASE-1)

Public Works Department

PWD Division Office Mandya | Mandya, Karnataka

Amount: ₹2.0 CrCloses: 18 Jul 2026Closed

Timeline

Published9 Jul 2026
Pre-Bid Meeting14 Jul 2026
Closed18 Jul 2026
Bid Opening20 Jul 2026