SPL REPAIR TO BLDG NO T-30 AND T-31 (A MESS) AT BARAMULLA UNDER GE 969 EWS

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

M&L Pre-painted glavatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour hanving tensile strength of 550 MPa as, in roofs,walls etc with, complete all as specified and as directed.

M&L Pre-painted glavatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour hanving tensile strength of 550MPa as, in roofs,walls etc with, complete all as specified and as directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc, complete all as specified and as directed.

M&L for 6 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc, complete all as specified and as directed.

S&F 2nd class soft wood 8 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail, complete all as specified and as directed.

M&L for preparing surfaces of French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and as directed.

S&F 6 mm thick insulation consisting of PVC insulated panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note : Panelling shall be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 6 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing Note : Panelling shall be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L for 12mm thick Gyp Board false ceiling with aluminium snap grid frame work of size 605x605mm, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm, complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over and incl a coat of pink primer, complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in floor sub base, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed.

M & L Non-skid ceramic tiles 7 to 8mm thick area of each tiles exc 0.18m and n.exc 0.38 Sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed.

S&F glazed ceramic coloured tiles in verticles surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sand mortar (1:4), complete all as specified and as directed.

LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 10 users, complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.

S&F Powder coated Anodised aluminums frame for doors, windows, ventilators with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc, complete all as specified and as directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed.

S & F Powder coated Anodized Aluminium sliding window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement etc, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks to galvanised wire stapple, complete all as specified and as directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick, complete all as specified and as directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

MS Cold rolled Butt hinges medium weight 100 mm long, complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and as directed.

S&F 200mm long Anodised Aluminium tower bolt, complete all as specified and as directed.

S&F 100mm long Anodised Aluminium tower bolt, complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy handle, complete all as specified and as directed.

S&F 100mm long extruded aluminium alloy handle, complete all as specified and as directed.

S&F in repairs curtain rails , anodised aluminium alloy with fixing brackets , stops, rollers etc, complete all as specified and as directed.

S&F for Aluminium anodised Brackets fixed in repair, complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for walling or random rubble stone masonry,uncoursed well bonded bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and as directed.

All as per item 48 but except stone only, complete all as specified and as directed

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description, complete all as specified and as directed.

M&L Rendering 10 mm thick on stone masonary surfaces or other than fair faces of brick work .in cement mortar (1:6), complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate ) as in surface channel and drains and benching including finishing the top of the benching even and smooth using extra cement, complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate Providing precast ce- ment concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe, complete all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I, complete all as specified and as directed.

Removal of existing water tank and S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I, complete all as specified and as directed.

S & F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms), complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified and as directed.

M& L for PCC 1:4:8 Type D-2 (using 40 mm graded aggrigate) as in foundation ,filling and mass concrete, complete all as specified and as directed.

S&F PVC (SWR) junction single T equal or unequal 110 mm bore, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

M&L in repair vitreous china wash down closet pan (one piece type) ivory with PVC sheet cover & flushing cistern,flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc, complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed.

S&F in repairs for 15 mm bore bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings, brass, chromium plated for glazed ware basin etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed and connection pipe etc including pedestal, complete all as specified and as directed.

S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified.

S & F in repairs Brass CP wall mixer /WHB Mixer 15 mm for mixing hot & cold water screwed down for iron pip eand fixed, complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L for point wiring for using 1.5Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(c) One 3 pin 5 Amp switch socket outlet on independent board

(d) One 3 pin 5 Amp switch socket outlet on same board with accessories

(e) One bell/buzzer point controlled by one switch

M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge.

S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6 Amps, one way one module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6/16 Amps, one way one module, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc, complete all as specified and as directed.

S & F Modular Bell push 6 Amps, modular type, complete all as specified and as directed.

S&F led luminaire comprising of high brightness LEDs 9/10W LED, IP 65/66, complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed.

S&F in repairs Distribution board, SPN 8 Way, Double door, complete all as specified and as directed.

S&F in repairs MCB, SPN 40 Amps 240 Volts B curve, complete all as specified and as directed.

S & F MCB Single pole 6-32A Amps 240 Volts C Curve, complete all as specified and as directed.

S&F exhaust fan/brisk air fan of size 300 mm sweep, non matallic,complete all as specified and as directed.

S&F LED Lamp 10 W, complete all as specified and as directed.

Supply and fixing LED lights fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F electric bell, ding dong AC 230Volts, single pole,complete all as specified and as directed.

S&F in wall mounted fans 300mm swing high speed, 230 Volts, 50 Hz, AC connecting up including provision of cable from connector to fan, complete all as specified and as directed.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed

S&F Socket outlet 2 in 1, 3 Pin, 5 Amps flush type, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin, 5 and 15 Amps flush type, complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed.

S&F in repairs Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size 2 Core 10 sq mm . including Taking out old unservicable cable from any space, complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out of soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm depth in soil, complete all as specified and as directed.

Removing excavated material (soil ) n.exc 50m and depositing where directed at a level n.exc. 1.5 mtr above the starting point, complete all as specified and as directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable, complete all as specified and as directed.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenchs as cable protection, complete all as specified and as directed.

S&F Gl Tubing light grade 40mm dia with all fitting; laid in trenches, complete all as specified and as directed.

Note:- Schedule of credit Rs 70,248.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Please Enable Macros to View BoQ information