Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC MINISTRY OF DEFENCE MES JALPAIGURI WEST BENGAL | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹34.6 L+₹4.1 L (13.5%)Rejected-Finance NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance Due to L2 Bidder | |
| 3 | L3₹35.9 L+₹5.4 L (17.8%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Due to L3 Bidder | |
| 4 | L4₹36.3 L+₹5.8 L (19.0%)Rejected-Finance | L4 | Rejected-Finance Due to L4 Bidder | |
| 5 | L5₹36.6 L+₹6.2 L (20.3%)Rejected-Finance | L5 | Rejected-Finance Due to L5 Bidder |
| Sl No | Description | Qty | Unit | M/S SARKAR BROTHERS L9 | M/s. MD IRSHAD L3 | N K Construction L2 | M/S MOHAN KUMAR BANSAL L6 | NARAYAN MAJUMDER L1 | M/S Pradeep Enterprise L4 | R.MANJIT& CO L7 | Chandra Construction L5 | SAILESH GIRI L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same from site including roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. | 400 | Sqm | 60 ₹24,000 | 30 ₹12,000 | 25 ₹10,000 | 10 ₹4,000 Lowest | 20 ₹8,000 | 45 ₹18,000 | 35 ₹14,000 | 20 ₹8,000 | 60 ₹24,000 |
| 2.00 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC as per manufacturer's instruction in order to maintain proper slope over existing roof surfaces for applying, finished even and smooth without using extra cement complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately under relevant item of this schedule. | 400 | Sqm | 250 ₹1,00,000 | 220 ₹88,000 | 135 ₹54,000 | 280 ₹1,12,000 | 160 ₹64,000 | 190 ₹76,000 | 280 ₹1,12,000 | 190 ₹76,000 | 120 ₹48,000 Lowest |
| 3.00 | M&L providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application as under:-
(a) applying primer coat with Primer @ 0.3 kg /sqm
(b) over priming coat applying applying single component acrylic polymer modified as manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition.
(c) Applying second coat of roof guard @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly.
Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer. | 400 | Sqm | 765 ₹3,06,000 | 650 ₹2,60,000 | 1,050 ₹4,20,000 | 520 ₹2,08,000 Lowest | 560 ₹2,24,000 | 775 ₹3,10,000 | 590 ₹2,36,000 | 700 ₹2,80,000 | 700 ₹2,80,000 |
| 4.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. | 625 | Sqm | 45 ₹28,125 | 30 ₹18,750 | 25 ₹15,625 | 10 ₹6,250 Lowest | 20 ₹12,500 | 45 ₹28,125 | 130 ₹81,250 | 70 ₹43,750 | 60 ₹37,500 |
| 5.00 | M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.
Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. | 105 | Sqm | 1,200 ₹1,26,000 | 1,450 ₹1,52,250 | 1,125 ₹1,18,125 | 1,200 ₹1,26,000 | 1,000 ₹1,05,000 | 1,270 ₹1,33,350 | 985 ₹1,03,425 Lowest | 1,250 ₹1,31,250 | 1,200 ₹1,26,000 |
| 6.00 | M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. | 520 | Sqm | 1,200 ₹6,24,000 | 1,300 ₹6,76,000 | 1,025 ₹5,33,000 | 1,050 ₹5,46,000 | 900 ₹4,68,000 Lowest | 1,250 ₹6,50,000 | 1,095 ₹5,69,400 | 1,250 ₹6,50,000 | 1,000 ₹5,20,000 |
| 7.00 | Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and as directed. | 18.25 | Cum | 700 ₹12,775 | 500 ₹9,125 | 400 ₹7,300 | 50 ₹912.5 Lowest | 400 ₹7,300 | 550 ₹10,037.5 | 500 ₹9,125 | 300 ₹5,475 | 250 ₹4,562.5 |
| 8.00 | M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:-
(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners
(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per remanufacturer's instruction.
(iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs.
(iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.
(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces
(vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation.
(vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drain out accumulated water.
(viii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists
(ix) Sunken portion shall be filled with lean concrete of (1:5:10) type E-2 | 16 | Sqm | 1,800 ₹28,800 | 1,000 ₹16,000 | 1,125 ₹18,000 | 2,500 ₹40,000 | 800 ₹12,800 Lowest | 1,250 ₹20,000 | 1,600 ₹25,600 | 900 ₹14,400 | 2,500 ₹40,000 |
| 9.00 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. | 120 | Sqm | 450 ₹54,000 | 380 ₹45,600 | 415 ₹49,800 | 400 ₹48,000 | 310 ₹37,200 | 550 ₹66,000 | 300 ₹36,000 Lowest | 350 ₹42,000 | 300 ₹36,000 Lowest |
| 10.00 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as sub base finished even & fair complete all as specified and as directed. | 123.3 | Sqm | 450 ₹55,485 | 380 ₹46,854 | 380 ₹46,854 | 400 ₹49,320 | 310 ₹38,223 | 39 ₹4,808.7 Lowest | 300 ₹36,990 | 350 ₹43,155 | 270 ₹33,291 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
11 Aug 2026, 6:00 pmClosed
GE (North) Binnaguri
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
REPAIR/ MAINT OF CERTAIN TOILETS BLOCKS IN OTM AREA UNDER GE (NORTH) BINNAGURI
2026_MES_777350_1
8701 / 53 / 2026-27 / 08 / E8
Open Tender
Civil Works
Item Rate
270 days
Binnaguri cantonment
As per Tender Document
8 documents required · 8 mandatory
₹500
GE (North) Binnaguri
₹86,000
Yes
5 Oct 2026
9 Jul 2026
13 Aug 2026
9 Jul 2026
11 Aug 2026
23 Jul 2026
9 Jul 2026 - 16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same from site including roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. | 400 | Sqm | - | - |
| 2 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC as per manufacturer's instruction in order to maintain proper slope over existing roof surfaces for applying, finished even and smooth without using extra cement complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately under relevant item of this schedule. | 400 | Sqm | - | - |
| 3 | M&L providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application as under:-
(a) applying primer coat with Primer @ 0.3 kg /sqm
(b) over priming coat applying applying single component acrylic polymer modified as manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition.
(c) Applying second coat of roof guard @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly.
Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer. | 400 | Sqm | - | - |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. | 625 | Sqm | - | - |
| 5 | M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.
Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. | 105 | Sqm | - | - |
| 6 | M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. | 520 | Sqm | - | - |
| 7 | Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and as directed. | 18.25 | Cum | - | - |
| 8 | M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:-
(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners
(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per remanufacturer's instruction.
(iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs.
(iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.
(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces
(vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation.
(vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drain out accumulated water.
(viii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists
(ix) Sunken portion shall be filled with lean concrete of (1:5:10) type E-2 | 16 | Sqm | - | - |
| 9 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. | 120 | Sqm | - | - |
| 10 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as sub base finished even & fair complete all as specified and as directed. | 123.3 | Sqm | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
Tender.pdf
Tender Documents • 1.19 MB
BOQ_870601.xls
BOQ • 0.45 MB
Sch.pdf
Additional Documents • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .