Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.8 LAccepted-AOC KALAYIL PUTHUPARAMBIL HOUSE THACHAMBARA P O PALAKKAD 678593 | PALAKKAD | PALAKKAD | KERALA | 678593 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹14.8 L+₹23,239 (1.60%)Rejected-AOC | 2 | Rejected-AOC L2 Bidder |
Tender Value
₹13.4 L
EMD Value
₹33,450
Closing Date
6 Nov 2020, 5:00 pmClosed
G Sali.
Works Manager, Workshop Sub Division, Malampuzha
Painting and Maintenance of Regulator gates of Kunnamkattupathy Regulator in Palakkad District
2020_Irrig_392914_1
31/AEE/MECH/MPZA/2020-21
Open Tender
Repair and Maintenance Works
Item Rate
180 days
chittur
Please refer Tender documents.
7 documents required · 7 mandatory
₹3,000
Yes
online
₹33,450
Yes
11 Jan 2021
22 Oct 2020
16 Nov 2020
22 Oct 2020
6 Nov 2020
22 Oct 2020
22 Oct 2020 - 6 Nov 2020
Amount
Painting, rubber seal changing and other and Maintenance
od63164/2019_2020/MH : Cleaning the shutter grooves including cost of labour , machinery , all leads and lifts, incidental & handling charges etc complete .
od63169/2019_2020/MH : Providing with temporary platform for painting of shutters, greasing the roller wheel assembly, replacement of rubber seals of the shutter etc. including the cost of material charge handling charge etc. complete
85.103 : Supply of MS checquered plates including cost of conveyance charges
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
85.106 : Supply of MS flats including cost of conveyance charges
od7526/2020_2021/MH : Fabrication of Hoisting bridge parts, Platform, seal fastener for shutter, etc. for the same as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied
od32174/2020_2021/MH : Erection of the hoisting Bridge parts ,platform ,seal fastener for shutter etc. including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied
od7525/2020_2021/MH : Over coat painting the regulator gates and embedded parts with two coats of epoxy tar black paint confirming to 1514948 with a minimum film thichkess of 150+/-5 microns,after cleaning the surface using high pressure water jet including cost of materials,labour charges,cost of testing all painting materials,incidental charges,hire of T&P etc etc.complete as per the direction of department officers at site..
85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
od7677/2020_2021/MH : Chipping cutting and removing the bolt & Nuts , dismantling ,taking out and stacking the old rubber seals from the gates without damaging the gate components including cost of all labour ,tools and accessories conveyance charges etc. complete
85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing
85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
od7753/2020_2021/MH : Applying grease on the wheel assembly of the regulating shutters, including Materials,labour,conveyance etc, complete as per the directions of departmental officers at site.
od7754/2020_2021/MH : Maintenance of the hoisting mechanisms of shutter and correcting their alignments for making them in easy operational condition,Filling gear oil in reduction gear boxes,cleaning and greasing gear wheels,replacing damaged bolts and nuts ,applying cardium compound on wire ropes including cost of labour , machinery , all leads and lifts, trail run ,incidental & handling charges etc complete as per the directions of departmental officers at site.
ASHIFUL HAK.C
Bidder Name
ASHIFUL HAK.C
JOBIN JOSEPH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_558964.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .