R and M of various JPD Bldgs at AEN (A-I) AEN (HTM) and APTPS at Rani ji ki Baori Bundi

P & L in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -All work up to plinth level. (A) 1:4:8 ( 1 cement : 4 coarse sand: 8 graded stone aggregate 40mm nominal size.) (B/3.1.6)

(A) M-15 Grade N.Mix. 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size.) (B/3.1.2)

RR stone masonry for with hard stone in foundation and plinth in CSM above 30cm thick wall in CM 1:6 (1cement :6 Sand). (B/6.1.6)

Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) (B-5.1.2)

P & L in position specifed grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1: 3 (1cement : 3 coarse sand) and making good the joints & cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix /Design Mix. (B-4.1)

S & F stone lintels / bed plates of approved quarry rough dressed in cement mortar 1:4 : Up to 15 cm thick. (B-6.18.1)

Half brick masonry in superstructure, above plinth level upto floor V level using bricks of designation 75. Cement mortar 1:6 (1cement: 6 coarse sand). (B-5.8.3)

Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) (B-5.15.2)

P & F precast cement concrete coping 1:2:4 mix 50 mm thick copmlete as per specification : (B-3.8)

P & F steel glazed doors windows and ventilator shutters of standerd rollde steel section joints mitred and welded with steel lugs 13x3mm, 10 cm, long embeded in cement concrete block 15X10X10CM of 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) of with wooden plugs and screws of rawl plugs and screws with fixing clips or with bolts and nyts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make of metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handlwds peg stay etc. as required:(A) Window side hung /Ventilators top or centre hung (openable) (B-9.19.3)