REPAIR / MAINT OF CENTRIFUGAL PUMP, SUBMERSIBLE PUMP, MONOBLOCK PUMP, MOTORS, STARTER AND SUCTION AND DELIVERY PIPE AND CONNECTED WORK UNDER GE CLEMENT TOWN, DEHRADUN

Amount

Repair to submersible motor, 440 volts 3 phase as per the following specification and cap :- (i) Transporting to workshop for repair and opening of submersible motor and cutting to burnt winding and cleaning to slots by cleaning re-agent and repair to damage stator slots. (ii) Rewinding to submersible motor with suitable size of super enamelled copper conductor of suitable as per existing size and gauge and insulating materials all as specified and directed. (iii) Replacement of thrust bearing – 01 No (iv) Replacement of bushes of rotor – 02 Nos (v) Replacement of thrust Plate and ped plate – 01 No . (vi) After repairing of motor re-assembling, transporting to P/H, refixing on the same base and testing complete all as specified and as directed.

For 125 HP cap and -ditto-

For 75 HP cap and -ditto-

For 60 HP cap and -ditto-

For 41/40 HP cap and -ditto-

For 12.5 HP cap and -ditto-

For 3.0 HP cap and -ditto-

Opening the submerssible pump from the motor, transporting to workshop, dismantling of Submersible pump set,tracing out the defects,and taking out the u/s parts from the pump set, metling, grinding to bring the set in its original position, replacement of neck ring, key set, brass bushes, adjustment nut, thrust plate, coupling bushes, GM ball bush, katcher key set etc., assembling the pump set and testing complete of the following capacity all as directed.

For 125 HP cap.2 stages,3660 LPM, 90 mtr head and -ditto-

For 75 HP cap.6 stages,1500 LPM, 120 mtr head and -ditto

For 60 HP cap.6 stages,1700 LPM, 120 mtr head and -ditto

For 41 HP cap.5 stages,1500 LPM, 80 mtr head and -ditto

For 12.5 HP cap.10 stages,500 LPM,, 55 mtr head and -ditto

For 3 HP cap., 150 LPH, 50 mtr head and -ditto

Opening, dismantling, decoupling and taking out following defective induction/turbine motor from foundation/base frame, transporting to workshop for repair & transporting back at site after repair and refixing the same on its position, recoupling, reconnection, testing commissioning complete all as specified and as directed. Note:- Repair work shall be measured and paid separately under respective item of Sch 'A'.

For 150 HP Cap and -ditto-

For 120 HP cap.(Turbine motor) and -ditto-

For 40/50 HP Cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

For 3/5 HP cap and -ditto-

Taking out the defective parts of induction motor/turbine motor, 3 phase, 440 Volts and rewinding with super enamelled copper conductor of suitable as per existing size and gauge including varnishing, drying, cleaning of slots, repair to any damage slot, metling to shaft for fixing of bearing and other required work for smooth functioning of motor, testing all as directed and specified of the following capacity of motors:-

For 150 HP Cap and -ditto-

For 120 HP cap.(Turbine motor) and -ditto-

For 40/50 HP Cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

For 3/5 HP cap and -ditto-

Opening of centrifugal pump set from the base, transporting to work shop, trace out defects and taking out the u/s parts from the pump set, metling, grinding, lathing work as required to make as per original shape and size and fixing the new parts as required complete all as specified and as directed. (Note : Spares will be measured and paid separately)

For 150 HP cap and -ditto

For 40/50 HP cap and -ditto

For 25/30 HP cap and -ditto

For 15 HP cap and -ditto

For 7.5 HP cap and -ditto

For 3/5 HP cap and -ditto-

Supply and replacement of Ball Bearing No. 6309/3309 for 150 HP Pump complete all as specified and as directed.

Supply and replacement of ball Bearing No. 6308/6309 for 40/50 HP Pump complete all as specified and as directed.

Supply and replacement of ball Bearing No. N321/ for 150 HP Motor complete all as specified and as directed.

Supply and replacement of ball Bearing No. N319 for 150 HP Motor complete all as specified and as directed.

Supply and replacement of Ball Bearing No. 6313 / 29324 for 120 HP Turbine

Supply and replacement of ball bearing No 6311/6312 for 40/50 HP Motor complete all as specified and as directed.

Supply and replacement of CI impeller as per existing size and sample, Ist and IInd stages suitable for centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of M S stud with nut complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of CI sleeve DE/NDE complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of CI/MS gland packing plate complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

For 3/5 HP cap and -ditto-

M& L for replacement of CI bush(stuffing bore bush) complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 5/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of Housing Sleeve complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of pump shaft EN-8 (SS) complete incl key and key groove as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

Repair to motor shaft of including check nuts of both side, making bearing sheet complete all specified of following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

M& L for replacement of bearing as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 15 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M & L for replacement for replacement of inter stage CI ring complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of cover of motor terminal connection complete as per existing sample and size of pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 7.5 HP cap and -ditto-

M& L for replacement of CI/MS coupling complete as per existing sample and size of centrifugal pump set of the following capacity:-

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

For 7.5 HP cap and -ditto-

For 3/5 HP cap and -ditto-

M& L for replacement rubber bush including nut,bolts and washers for kirloskar make pump set complete as per existing sample and size of centrifugal pump upto 150 HP cap complete all as specified and as directed.

M& L for replacement tyre coupling complete as per existing sample and size of centrifugal pump of capacity:-

of size 19 Nos .

of size 16 Nos

of size 15 Nos

of size 14 Nos

M& L for replacement of hello light packing of 1mm to 2mm for centrifugal pump at the time of dismantling and assembling complete all as specifeid and as directed.

M& L for replacement of rubber packing sheet 6 mm Thick complete all as specified and directed.

Supply & fix of rubber packing sheet 3 mm Thick all as specified and directed.

Lifting of submerssible pump set of any capacity from borewell carefully with coloumn pipe of size 125/150 mm dia flanged/socketed MS/GI, 3 mtr each length (20 to 30 Nos of pipe) along with existing submerssible electric cable and shifting the pipe aside for reuse as directed.

Lowering of submerssible pump set of any cap into the borewell carefully with coloumn pipe of size 125/150 mm dia flanged/socketed MS/GI, 3 mtr each length (20 to 30 Nos of pipe), along with existing submerssible electric cable binding with GI/Al wire including making joint to submerssible cable all as directed.. (Note: - Rubber gasket, jointing material, nut, bolts, washers as required shall be included in the quoted rate).

Lifting of submerssible pump set of any cap from borewell carefully with coloumn pipe of size 150/200 mm dia flanged/socketed MS/GI, 3 mtr each length (8 to 15 Nos of pipe) along with existing submerssible electric cable and shifting the pipe aside for reuse as directed..

Lowering of submerssible pump set of any cap into the borewell carefully with coloumn pipe of size 150/200 mm dia flanged/socketed MS/GI, 3 mtr each length (8 to 15 Nos of pipe), along with existing submerssible electric cable binding with GI/Al wire including making joint to submerssible cable all as directed. (Note: - Rubber gasket, jointing material, nut, bolts, washers shall be included in in the quoted rate.)

Lifting of submerssible pump set of any cap from borewell carefully with coloumn pipe of size 50/80 mm dia flanged/socketed MS/GI,3 mtr each length (10 to 20 Nos of pipe) along with existing submerssible electric cable and shifting the pipe aside for reuse as directed.

Lowering of submerssible pump set of any cap into the borewell carefully with coloumn pipe of size 50/80 mm dia flanged/socketed MS/GI, 3 mtr each length (10 to 20 Nos of pipe), along with existing submerssible electric cable binding with GI/Al wire including making joint to submerssible cable all as directed.. (Note: - Rubber gasket, jointing material, nut,bolts, washers shall be included in in the quoted rate.)

Supply, joining and lowering galvanized (Hot Dip) MS ERW type 4.5 mm wall thickness and 10 mm thick flange duly welded column pipe, 3.0 mtr length each complete with rubber gasket nut bolts, spring washers bore of column pipe 150 mm all as diredcted. (Make of MS Pipe : TATA/JINDAL or equivalent as approved by GE.

Repair to grass cutting machine by means of defective worn out parts (Note :- Spare parts required will be measured and paid seperately.)

Supply only following part/items for Grass cutting machine :-

Nylon cutter

Nylone cutter assembly

Air filter

Spark plug

Ignition coil

M&L for painting of (centrifugal pump, motor & Starter panel etc) with of following capacity two coat of synathic paint after scrating of old paint complete all as specified & as directed :- Note : Painting of centrifugal pump, motor & Starter etc shall be measured in one job)

For 150 HP cap and -ditto-

For 40/50 HP cap and -ditto-

For 25/30 HP cap and -ditto-

Material and labour for brick work with Sub class 'B' bricks straight or curved, in foundation of equpment, platform, ramp, staging, valve pits etc. using cement mortar (1:4) complete all as specified and as directed.

Material and Labour for cement concrete PCC (1:3:6) type C2 using 40 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges as in foundation/mass concrete etc including necessary form work etc and making good surfaces as reqd and as directed.

M&L for replacment of pressure gauge 0-100 PSI, dial type fixed on pumping line in various pumps all as specified and as directed.

M&L for repalcement of existing air release valve made out of brass suitable for pumpset of various capacities complete all as specified and as directed.

Taking down existing indication lamp from panel and S&F LED indicatiion lamp for R, Y & B phase complete all as specified and as directed.

Repair to Sluice valve of 350mm dia from line by means disconnection by opening of nut bolts etc and refixing the same affter replacement of Spindle/Gutkha/rubber sheet including lightening of nut bolts etc complete all as specified and as directed.

Repair to Sluice valve of 300mm dia from line by means disconnection by opening of nut bolts etc and refixing the same affter replacement of Spindle/Gutkha/rubber sheet including lightening of nut bolts etc complete all as specified and as directed.

Repair to Sluice valve of 200mm dia from line by means disconnection by opening of nut bolts etc and refixing the same affter replacement of Spindle/Gutkha/rubber sheet including lightening of nut bolts etc complete all as specified and as directed.

Repair to Sluice valve of 150mm dia from line by means disconnection by opening of nut bolts etc and refixing the same affter replacement of Spindle/Gutkha/rubber sheet including lightening of nut bolts etc complete all as specified and as directed.

Supply and fixing in replacement, CI sluice valve class PN-1.6 type ISI marked with iron wheel head brass spindle. Confirming to IS - 14846 flanged ends including rubber joints and jointing material all as required at site including any addition alteration for fixing at site including dismantling old unservicable CI sluice valve complete all as directed and of following sizes. Make : Kirloskar / BVI/Bir

For 150 mm bore and -ditto-

For 200 mm bore and -ditto-

Supply and fixing CI double flanged Non return valve, class 'B', High pressure PN 1.6 conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed of the following sizes :- (Make : Kirloskar, BVI, Bir)

For 100 mm dia bore and -ditto-

For 150 mm dia bore and -ditto-

For 200 mm dia bore and -ditto-

Supply and fixing Air realese valve, Double conforming to ISI marked, including bolts, nuts, washer and rubber packing all as specified and directed for suitable size riasing main water pipe line :- (Make : -Kirloskar, BVI, Bir)

Repair to foot valve of 200mm dia suction line by means disconnection by opening of nut bolts etc and taking out from under ground Sump and refixing the same affter replacement of leather/Neoprane/rubber sheet including lightening of nut bolts etc. complete all as directed.

Supply and replacement of foot valve flanged type of 200 dia suction line by means disconnection by opening of nut bolts etc and taking out from under ground Sump including nut bolts etc completed all as directed.

Lifting of existing turbine pump set 120 HP with dismantling of motor carefully and kept in site with column pipe and lowering repaired turbine pump set in tube well and repairing motor and connected with pump set and starter all as directed .

Transporting pump set to work shop for repair capacity all as directed.

Opening of pump set and replacement of log collar of impeller.

Replacement of ball bush of brass.

Replacement of neck ring of brass.

Replacement of adjustment nuts

Replacement of spider guide bush.

Replacement of shaft coupling steel bush.

After repair of pump set assembling and transport to Main Pump House.

S&F check nut, brass suitable for pump of capacity 40 HP to 150 HP including threading and as per sample.

Repair & overhauling of fully automatic ATS starter of 150 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed..

M & L for replacement copper fix contact large for 150 HP ATS starter Kilburn make or equivalent as approved by GE.

M & L for replacement copper Small Finger for 150 HP ATS starter Kilburn make or equivalent as approved by GE.

All as per item No. 57 above but moving contact and -ditto-

M & L for replacement of volt coil for 150 HP starter.

M & L for replacement over load coil for 150 HP starter.

S&F copper base contact for 150 HP starter.

Supply only Starter oil of dielectric strength 45 kv for top up oil of star delta starter complete all as specified and directed.

Repair/replacement of fully autimatic Star delta starter of 75 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of proper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed.

Repair/replacement of fully autimatic Star delta starter of 60 HP of capacity 3 phase 415 volts including reminding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed .

Repair & overhauling of fully autimatic ATS starter of 75 HP of capacity 3 phase 415 volts including rewinding with super enameled copper wire of peoper guage, varnishing, tapping, insulation glass sleeves etc all as specified and directed .

Supply and in replacement copper fix contact for 75 HP ATS starter Kilburn /Jyoti make or equivalent as approved by GE.

All as per item No. 66 above but moving contact.Kilburn /Jyoti

S&F male and female copper contact (set of three) for Jyoti make oil immersed auto star delta starter for the 75 HP capacity .

S&F thermal over load relay for auto star delta starter for the 60 HP capacity.

S&F thermal timer adjusted between 3 to 12 second for auto star delta starter for the 75 HP capacity-

S&F in replacement of Oil immersed auto-transformer motor starter of P-1TA type automatic for Submersible/centrifugal pump set for Motor rating AC-3 phase, 440 - 415 volt, 50Hz, of rating 110KW/150HP, full load current upto 200 Amps, relay range upto 120-200 Amp, transformer oil tank capacity 42 Ltrs etc etc all as specified and directed.

All as per Ser item No 71 above but starter capacity upto 90KW/120 HP and -ditto-

All as per Ser item No 71 above but starter capacity upto 75KW/100 HP and -ditto-

All as per Ser item No 71 above but starter capacity upto 55KW/75 HP and -ditto-

S&F in replacement of MU-G75 fully automatic star- Delta starter Submersible pump controller in sheet enclosure type MU-G, Motor rating AC-3 Duty,415 volt,50Hz, 3 Phase suitable for 75 HP Submersible pump complete all as specified and as directed.

S&F in replacement of MU-G75 fully automatic star- Delta starter centrifugal pump set controller in sheet enclosure type MU-G, Motor rating AC-3 Duty, 415 volt, 50Hz, 3 Phase suitable for upto 60 HP centrifugal pump complete all as specified and as directed.

Supply and fixing flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 50 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

Supply and fixing flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 35 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

Supply and fixing flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 25 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

Supply and fixing flat copper conductor PVC insulated & PVC sheathed submersible cable as per IS marked of size 16 Sqmm, 3 Core working on 1100 volts, 50 Hz supply complete all as specified and directed.

Supply and replacement contactor 415 volts, 63 amps fixed in starter suitable for 120/150 HP motor complete all as specified and as directed..Make:-C&S/Havells or equivalent as approved by GE.

Supply and replacement contactor 415 volts, 63 amps fixed in starter suitable for 80/75 HP motor complete all as specified and as directed..Make:-C&S/Havells or equivalent as approved by GE.

Supply and replacement contactor 415 volts, 63 amps fixed in starter suitable for 40/50 HP motor complete all as specified and as directed..Make:-C&S/Havells or equivalent as approved by GE..

Supply and replacement contactor 415 volts, 63 amps fixed in starter suitable for 30/25 HP motor complete all as specified and as directed..Make:-C&S/Havells or equivalent as approved by GE.

S&F thermal over load relay for auto star delta starter for the 120/150 HP capacity complete all as specified and as directed.

S&F thermal over load relay for auto star delta starter for the 80/75 HP capacity complete all as specified and as directed.

S&F thermal over load relay for auto star delta starter for the 40/50 HP capacity complete all as specified and as directed.

S&F thermal over load relay for auto star delta starter for the 30/25 HP capacity complete all as specified and as directed.

Supply and repalcement staring relay for 40/50 HP motor complete all as specified and as directed.Make:-C&S/Havells or equivalent as approved by GE.

S&F Ammeter, square digital type, 0-200 Amps with suitable size of CT complete all as specified and as directed.. Make:-AE/HPL or equivalent as approved by GE.

All as per item No. 90 above but 0-100 amps with suitable size of CT complete all as specified and as directed..

S&F volt meter digital type, square type, 0-500 volts with suitable size of CT complete all as specified and as directed.. Make:-AE/HPL or equivalent as approved by GE.

Supply & fix gland packing of size 10 mm to 16mm complete all as specified and as directed.

S&F MCCB 400 amps, TP 50 KA complete all as specified and as directed. Make:-Legrand/C&S/Havells .

S&F MCCB 250 amps, TP 35 KA complete all as specified and as directed.Make:-Legrand/C&S/Havells .

S&F MCCB 200 amps, TP 35 KA complete all as specified and as directed. Make:-Legrand/C&S/Havells .

S&F change over switch 200 amps complete all as specified and as directed.Make:-Legrand/C&S/Havells .

Repair of water level indicator electronic type for semi under gtround sump at booster Pump House showing level of water with clear visibility from 20m distance in day and night time complete all as specified and directed.

S & F in replacement of Digital motor protection divice, i.e protection of single phasing, voltage - 45-520 V AC (Ph to Ph), 25-300 V (Ph to N), current - 5 Amp (CT ratio programmable 5-9000/5), Frequency -45 Hz to 55 Hz, unbalance voltage & phase Sequence/ reversal & faliure complete all as specified and as directed.

Repair for aviation light LED type fixed on the top of OHT of any height including necessary fixing accessories, fixing of suitable size of MS/GI angle iron frame with wire mess for monkey guard/protection, complete all as specified and directed.

Material and labour for cross arms, bracing, supports, clamps and back plate fabricated from structural steel section including nut, bolts, washers, welding, bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint ccomplete all as specified and as directed.

Taking of water sample, from tubewell and location indicated by Engr- in Charge and carried out Physical, Chemical and Becteriological test from Authorised govt institute/Branch complete all as specifid and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/S Konark Electric Sales Corporation

D.K. ENTERPRISES