Nagar Panchayat Risia K Ward No 11 Mohalla Devipura Me Sauchalay Ka Nirman Karya.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge DSR-2.6.1

Supplying and filling in plinth with sand under floors, including watering. ramming, consolidating and dressing complete, DSR 2.27

1:5:10 (1 cement: 5 coarse sand (zone-llll) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4:1:10

Brick work with common burnt clay FPS(non modular)bricks of class designation 7.5 in foundation and plinth in 1:6 (1 cement: 6 coarse sand) dsr 6.1.2

Brick work with common burnt clay F.P.S(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and size in 1:6 (1 cement 6 coarse sand) dsr 6.4 2

Centering and shuttering including strutting. propping etc. and removal of form for dsr 5.91

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. Complete for all lift. dsr 2.25(a)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering. finishing and reinforcement 1:1.5.3 (1 cement: 1.5 coarse sand(zone-III) derived form natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DS5.5.2.2

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Hot rolled deformed bars dsr 5.22A.4

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20mm nominal dia Rings DSR 18.8.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100mm nominal dia Rings DSR 18.9.9

Constructing masonry Chamber sonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for stop cock, with C. I. surface box 100x100x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size), lincluding necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class

Wiring for twin control light point with 1.5 mm FRLS PVC insulated coper conductor single core cable in surface /recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. -Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR NO ELE 2022 1.3.3

12 mm thick Plaster 1:6 Cement & Fine Sand dsr 13.1.2

Finishing walls with water proofing cement paint of required.shade dsr 13.44.1

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. DSR: 10.5.1

Providing and Laying vitrified floor tiles in different size(thickness to be specified by the manufacturer) with 20 mm thick cement mortar 1:4 cement and c sand including aroutina the joints etc complete.dsr 11:41:2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR:8.31

Providing and fixing water closet squatting pan (Indian type-W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.11 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests -DSR 17.1.1

Providing and fixing white citreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. DSR: 17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer -DSR:17.1A a

Cistern with fittings for Waterless Urinal each dsr 7075

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings -& fixtures for tank shall be paid separately 18 48A

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DSR: 18.50.1

S/F of Sigh Board and Photographe

Please Enable Macros to View BoQ information