Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC TRIVANDRUM | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹22.3 L+₹2.2 L (10.7%)Rejected-Finance 200 NAVAGAM NAVAGAM TA SAYLA SURENDRA NAGAR GUJARAT 363430 | SURENDRANAGAR | GUJARAT | 363430 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹22.5 L+₹2.4 L (11.6%)Rejected-Finance HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L3 | Rejected-Finance BEING L3 |
| Sl No | Description | Qty | Unit | Vandan Enterprises L1 | Harsh Infrastructure L3 | ARTI CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| .00Schedule 'A' | ||||||
| 1.00 | Supply and fixing automatic timer operated solar panel cleaning system (Total Panel-200) including pipe, elbowe, bend, tee, coupler, sprayers and electrical wiring with following materials :-
(i) 1 inch upvc pipe as per site requirement
Make: Astral/Finolex or equivalent
(ii) 1 inch elbow - 50 Nos
(iii) 1 inch bend - 60 Nos
(iv) 1 inch tee - 35 Nos
(v) 1 inch coupler - 30 Nos
(vi) 1 ½ inch bushing - 30 Nos
(vii) 1/2 inch upvc pipe - 240 RM
Make: Astral/Finolex or equivalent
(viii) 1/2 inch tee - 50 Nos
(ix) 1/2 inch thread tee - 210 Nos
(x) 1/2 inch thread elbow - 40 Nos
(xi) Spayer - 250 Nos
(xii) 1/2 inch bend & elbow - 15 Nos
(xiii) 1/2 inch coupler & end cap- 15 Nos
(xiv) UPVC Solution - 2 KG
(xv) Electrical wiring - 90 RM
(xvi) Aqua Machine - 7 Nos
(xvii) Timer - 02 Nos
(xviii) 1 HP Submersible Pump - 02 Nos | 1 | Each | 2,35,000 ₹2,35,000 Lowest | 4,70,000 ₹4,70,000 | 2,86,000 ₹2,86,000 |
| 2.00 | Supply, Fixing and testing Smart Digital display 10-levels % Indicator stage type with mechanism to detect & display the Water level in an Underground/Overhead tank, corrosion & maintenance free Magnetic sensors Buzzer alarm sounds on Low & High Levels.Sinetrac Cat No WLSD : or equivalent Including necessary fittings all as specified and directed. | 3 | Each | 25,000 ₹75,000 Lowest | 25,000 ₹75,000 Lowest | 39,000 ₹1,17,000 |
| 3.00 | Supply and laying 12 Core Copper Tinned Wire & corrsion free Sensors cable including all accessories, complete all as specified and directed by Engineer-in-Charge. | 80 | Running Metre | 250 ₹20,000 | 1,500 ₹1,20,000 | 175 ₹14,000 Lowest |
| 4.00Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified as per site requirement complete of sizes of nominal dia:- | ||||||
| 4.01 | 32mm OD | 65 | Running Metre | 325 ₹21,125 | 220 ₹14,300 | 210 ₹13,650 Lowest |
| 4.02 | 50mm OD | 450 | Running Metre | 625 ₹2,81,250 | 250 ₹1,12,500 Lowest | 475 ₹2,13,750 |
| 5.00Supply & Fixing CPVC Gate /ball valves as per requirement of the site of the following | ||||||
| 5.01 | 32mm OD | 2 | Each | 1,500 ₹3,000 | 1,600 ₹3,200 | 225 ₹450 Lowest |
| 5.02 | 50mm OD | 6 | Each | 2,500 ₹15,000 | 2,500 ₹15,000 | 550 ₹3,300 Lowest |
Tender Value
₹21.7 L
EMD Value
₹43,500
Closing Date
25 Aug 2025, 6:00 pmClosed
GE (I) CG PORBANDAR
COAST GUARD DHQ NO 1, OPP BIRLA FACTORY
PROVISION OF SOLAR PANEL SYSTEM CLEANING SYSTEM AT LEKAWADA UNDER GE (I) CG PORBANDAR
2025_MES_722322_1
8070A/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
LEKAWADA
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (I) CG PORBANDAR
₹43,500
Yes
29 Sept 2025
24 Jul 2025
27 Aug 2025
24 Jul 2025
25 Aug 2025
7 Aug 2025
Amount
Schedule 'A'
Supply and fixing automatic timer operated solar panel cleaning system (Total Panel-200) including pipe, elbowe, bend, tee, coupler, sprayers and electrical wiring with following materials :- (i) 1 inch upvc pipe as per site requirement Make: Astral/Finolex or equivalent (ii) 1 inch elbow - 50 Nos (iii) 1 inch bend - 60 Nos (iv) 1 inch tee - 35 Nos (v) 1 inch coupler - 30 Nos (vi) 1 ½ inch bushing - 30 Nos (vii) 1/2 inch upvc pipe - 240 RM Make: Astral/Finolex or equivalent (viii) 1/2 inch tee - 50 Nos (ix) 1/2 inch thread tee - 210 Nos (x) 1/2 inch thread elbow - 40 Nos (xi) Spayer - 250 Nos (xii) 1/2 inch bend & elbow - 15 Nos (xiii) 1/2 inch coupler & end cap- 15 Nos (xiv) UPVC Solution - 2 KG (xv) Electrical wiring - 90 RM (xvi) Aqua Machine - 7 Nos (xvii) Timer - 02 Nos (xviii) 1 HP Submersible Pump - 02 Nos
Supply, Fixing and testing Smart Digital display 10-levels % Indicator stage type with mechanism to detect & display the Water level in an Underground/Overhead tank, corrosion & maintenance free Magnetic sensors Buzzer alarm sounds on Low & High Levels.Sinetrac Cat No WLSD : or equivalent Including necessary fittings all as specified and directed.
Supply and laying 12 Core Copper Tinned Wire & corrsion free Sensors cable including all accessories, complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified as per site requirement complete of sizes of nominal dia:-
Supply & Fixing CPVC Gate /ball valves as per requirement of the site of the following
Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth and getting out Soft/ Loose soil, complete all as specified and directed by Engineer-in-Charge.
Returning filling in including spreading levelling watering and well Ramming in layers not exceeding 25 cm thick, complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for submain wiring with two runs of 2.5 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit / PVC Casing caping and one run of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable as earth conductor in concealed/surface casing caping but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc., complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing MCB (DB) SPN 4 way double door 415 V made of sheet metal enclosure for MCB's as incomming and SPN/SP MCB as outgoing, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing MCB SPN pole 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 16/32 Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing MCB SP 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 6-32 Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge.
Supply and installed testing and commissioning Monoblock pump set , electric drivern 3 phase, 415 V (+10 or -10), confirming IP 68, CI Body, CI/Bronze impeller of head range 27-42mtr, discharge 680-300LPM capacity of size 50mm including installation, starter, coupling with discharge pipe, etc., complete all as specified and directed by Engineer-in-Charge. Make :- Kirloskar/ Crompton
Material & Labour for weather proof flexible three core flat cables copper counductor insulated with PVC sheathed for submersible pump motor with voltage grade up to 1100, 6.0 sqmm including proper lugs and fittings, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete (PCC) in foundation using 1:4:8 mix type D-2 using 40mm graded aggregate for foundation/ support, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for PCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete using 1:2:4 Nominal mix type, 20mm graded aggregate for foundation including all necessary form work & Iron Works, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for fabrication and installation Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-Charge.
Material and labour for Earthing complete with Galvanised iron plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI earth strip of size 32x6 mm by means of bolts, nuts, check nuts and washers including necessary excavation earth work, PCC Chamber etc all as shown in electrical plate No 3 of SSR Part-I 2009 and connected to earthing test piont all as specified or indicated including CI Cover, Funnel, GI watering pipe 20mm medium grade, wire mesh and lugs etc. with GI Pipe 25mm bore light grade for protection 7.5 Mtrs long including testing on completion, complete all as specified and directed by Engineer-in-Charge.
Construction of brick masonry valve pit complete including necessary excavation and earth work complete all as specified with internal dimension 150x150x110cm (type 'B') including MS sheet cover 3mm thick welded with hinges on angle iron frame 50x50x6mm with hold fast grouted in 100mm thick PCC (1:2:4) type B-1 coping on top of brick wall including necessary locking arrangement, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil, complete all as specified and directed by Engineer-in-Charge.
Supply, jointing of Snap Fit Coupler for Double Walled Corrugated Pipe(DWC) as UG Cable Pratection complete of Size 63/50mm, complete all as specified and directed by Engineer-in-Charge.
Supply and laying double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground calbes of size 63mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection, complete all as specified and directed by Engineer-in-Charge. Note:- Excavation and earth work shall be measured and paid separately. Make: Rex/Poly/Gemini
ARTI CONSTRUCTION (BID ID -3405663)
Harsh Infrastructure (BID ID -3405880)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .